| 基于Simulink的线控制动系统仿真 |
| |
| 引用本文： | 刘凡,张鹏,延秋双,唐家宝.基于Simulink的线控制动系统仿真[J].汽车实用技术,2021(8):70-72,106. |
| |
| 作者姓名： | 刘凡 张鹏 延秋双 唐家宝 |
| |
| 作者单位： | 中国矿业大学（北京）机电与信息工程学院 |
| |
| 基金项目： | 国家大学生创新训练项目(编号C201904422)资助。 |
| |
| 摘 要： | 文章利用Solidworks软件对某型号线控制动系统进行装配体建模,分析了系统的工作原理和运动状态;利用ADAMS软件建立了该系统的动力学模型,并应用Simulink软件建立了其控制模型,最后在位移传感器的不同情况下对线控制动系统的线性助力阶段进行仿真验证。结果表明,使用单位移传感器,可以准确检测输入力,并控制电机进行助力,系统位移控制达到设计要求。
|
| 关 键 词： | 线控制动系统 ADAMS SIMULINK仿真 |
Simulation of Brake-by-Wire System Based on Simulink |
| |
| Authors: | Liu Fan Zhang Peng Yan Qiushuang Tang Jiabao |
| |
| Institution: | (School of Mechanical Electronic and Information Engineering,China University of Mining and Technology-Beijing,Beijing 100083) |
| |
| Abstract: | The assembly model of Brake-by-Wire system was established by Solidworks software.The working principle and the motion status are analyzed.The dynamics model of Brake-by-Wire system is established by the utilization of Adams simulation platform.By building simulation control program in Matlab/Simulink environment,the assistance stage of system in different cases of displacement sensor is simulated and verified.The results show that the control system using the unit displacement sensor can accurately detect the input force and control the motor to assist,and the displacement meets the design requirements. |
| |
| Keywords: | Brake-by-wire system ADAMS Simulink simulation |
| 本文献已被 维普 等数据库收录！ |
|
