| 液压破碎锤系统建模与仿真 |
| |
| 引用本文： | 杨国平,王仁亮,陈博,高军浩.液压破碎锤系统建模与仿真[J].中国公路学报,2011(3). |
| |
| 作者姓名： | 杨国平 王仁亮 陈博 高军浩 |
| |
| 作者单位： | 上海工程技术大学汽车工程学院; |
| |
| 基金项目： | 国家自然科学基金项目(50975169) |
| |
| 摘 要： | 为分析液压破碎锤的动态性能,以YC70型液压破碎锤为研究对象,在系统分析其工作原理的基础上,建立了液压破碎锤的非线性数学模型,利用编制的仿真程序进行计算,并将仿真结果与实测结果进行对比。结果表明:仿真结果与实测结果的误差在2%以内,从而验证了数学模型与仿真程序的准确性;液压破碎锤工作过程中,冲击活塞始终处于剧烈的变速运动状态,其加速度可达623.9 m.s-2,最大速度可达7 688 mm.s-1;换向阀亦处于高频换向状态,换向阀芯在运动过程中受力有较大波动,而且2个极限位置与阀体有较强烈的冲撞,但对位移影响不明显,也即对上腔所控液压油影响不大。
|
| 关 键 词： | 机械工程 液压破碎锤 仿真 系统建模 |
Modeling and Simulation of Hydraulic Breaker System |
| |
| YANG Guo-ping,WANG Ren-liang,CHEN Bo,GAO Jun-hao.Modeling and Simulation of Hydraulic Breaker System[J].China Journal of Highway and Transport,2011(3). |
| |
| Authors: | YANG Guo-ping WANG Ren-liang CHEN Bo GAO Jun-hao |
| |
| Institution: | YANG Guo-ping,WANG Ren-liang,CHEN Bo,GAO Jun-hao(School of Automotive Engineering,Shanghai University of Engineering Science,Shanghai 201620,China) |
| |
| Abstract: | In order to analyse the dynamic performance of hydraulic breaker,regarded YC70 type hydraulic breaker as the research object,based on systematic analysis of operational principle,the nonlinear mathematic model of hydraulic breaker was established and the simulated programs were compiled and were used to calculated.Simulated result was compared with the test result.Result shows that the error between the simulated result and the test result is within 2%,which indicates the mathematical model and the simulate... |
| |
| Keywords: | mechanical engineering hydraulic breaker simulation system modeling |
| 本文献已被 CNKI 等数据库收录！ |
|
