首页 | 本学科首页   官方微博 | 高级检索  
     检索      

毛乌素沙漠地区重载铁路路基风积沙填料特性和压实系数研究
引用本文:刘城,吴广陵,张艳召,杨有海.毛乌素沙漠地区重载铁路路基风积沙填料特性和压实系数研究[J].路基工程,2016,0(6):138-142.
作者姓名:刘城  吴广陵  张艳召  杨有海
作者单位:1.兰州交通大学土木工程学院, 兰州 730070
摘    要:依托蒙华重载铁路第二标段工程建设,对毛乌素沙漠地区风积沙的工程特性及不同影响因素下路基填料的压实系数进行了试验研究。结果表明:该段风积沙填料属C组填料,可用于基床以下路基的填筑;其最优含水率为14%,最大干密度为1.79 g/cm3;摊铺厚度为35~45 cm,当含水率为12%~16%时,装载机碾压6遍+压路机静压2遍收面的碾压组合最为经济合理,此时松铺系数约1.3~1.4;提出了保证风积沙路基压实质量的措施。

关 键 词:风积沙填料    重载铁路    压实系数    含水率    影响因数
收稿时间:2019-11-09

Research on Features and Compaction Coefficient of Subgrade Aeolian Sand Filling for Heavy Haul Railway in Mu Us Desert
Abstract:The experimental research was carried out for engineering properties of aeolian sand in Mu Us desert and the compaction coefficient of filling subgrade under different influencing factors based on the construction of western Inner Mongolia to central China heavy haul railway. The results showed that: this section of the aeolian sand belongs to group C filling and can be filled in the subgrade under the roadbed. The optimal moisture content is 14%, and the maximum dry density is 1.79 g/cm3, and the paving thickness is 35~45 cm. When the moisture content is 12%~16%, loader is rolling 6 times at first, and then roller is rolling 2 times with static pressure, which is most economical and reasonable. At this time, the loose paving coefficient is about 1.3~1.4. Measures were put forward to ensure the compaction quality of subgrade filling by aeolian sand.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《路基工程》浏览原始摘要信息
点击此处可从《路基工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号