| 基于多CPU结构的电控组合泵电控单元设计 |
| |
| 引用本文： | 尤丽华,唐雄辉,安伟,孙晓琴,李刚,王诣.基于多CPU结构的电控组合泵电控单元设计[J].车用发动机,2009(6). |
| |
| 作者姓名： | 尤丽华 唐雄辉 安伟 孙晓琴 李刚 王诣 |
| |
| 作者单位： | 1. 江南大学机械工程学院,江苏,无锡,214122
2. 无锡威孚高科技股份有限公司技术中心,江苏,无锡,214000 |
| |
| 基金项目： | 国家科技支撑项目，江苏省汽车工程重点实验室开放基金 |
| |
| 摘 要： | 提出了用多片C8051F500八位微处理器合理分配任务的电子控制单元结构方案,设计了多CPU的低成本电子控制单元的硬件和软件。总线隔离和权限电路解决了多CPU共享存储器的问题,双阶段PWM波限流控制驱动电路有效提高了高速电磁阀的驱动速度并改善驱动波形。基于模块化设计思想设计了电子控制单元软件。在油泵试验台上对电控单元的驱动品质、喷油定时以及喷油延续角的控制效果等进行了测试。结果表明,所设计的电控单元驱动响应快,控制精度高,性能稳定。
|
| 关 键 词： | 电控组合泵 电控单元 多CPU系统 |
The Design of Electronic Control Unit for Electronically Controlled Assembly Pump Based on Multi-processor Structure |
| |
| YOU Li-hua,TANG Xiong-hui,AN Wei,SUN Xiao-qin,LI Gang,WANG Yi.The Design of Electronic Control Unit for Electronically Controlled Assembly Pump Based on Multi-processor Structure[J].Vehicle Engine,2009(6). |
| |
| Authors: | YOU Li-hua TANG Xiong-hui AN Wei SUN Xiao-qin LI Gang WANG Yi |
| |
| Institution: | YOU Li-hua1,TANG Xiong-hui1,AN Wei1,SUN Xiao-qin2,LI Gang2,WANG Yi2(1.School of Mechanical Engineering,Jiangnan University,Wuxi 214122,China,2.Research Centre,Wuxi Weifu High Tech.Co.Ltd.,Wuxi 214000,China) |
| |
| Abstract: | The ECU scheme of processing the task with multiple C8051F500 8-bit microprocessors was put forward and then the hardware and software of multi-processor ECU were designed.With the method of bus isolation and circuit priority,the shared-memory problem of multi-processor was solved.Under the help of two-stage PWM current-limiting driving circuit,the driving speed and waveform were effectively improved.Based on the method of module design,the software of ECU was designed.The driving quality and the control ef... |
| |
| Keywords: | electronically controlled assembly pump electronic control unit(ECU) multi-processor system |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
