| 两种大型集装箱船绑扎桥结构强度的对比计算浅析 |
| |
| 引用本文： | 张鼎,黄维,时永鹏.两种大型集装箱船绑扎桥结构强度的对比计算浅析[J].船舶工程,2015,37(S1):42-44. |
| |
| 作者姓名： | 张鼎 黄维 时永鹏 |
| |
| 作者单位： | 中国船舶工业集团公司第七0八研究所,中国船舶及海洋工程设计研究院 民船部,中国船舶及海洋工程设计研究院 民船部 |
| |
| 基金项目： | 工业和信息化部、财政部高技术船舶科研项目(2012K24250) |
| |
| 摘 要： | 以大型集装箱船常见的剪力墙式绑扎桥和A型斜撑式绑扎桥为研究对象,基于通用大型有限元分析软件PATRAN/NASTRAN及CCS规范的相关要求,对两种绑扎桥的结构强度进行了对比计算分析。结果表明：两种型式的绑扎桥在结构强度方面相差不大,相比而言,剪力墙式绑扎桥略优于A型斜撑式。
|
| 关 键 词： | 大型集装箱船 剪力墙式绑扎桥 A型斜撑式绑扎桥 结构强度 |
| 收稿时间： | 2015/3/30 0:00:00 |
| 修稿时间： | 2015/7/18 0:00:00 |
Structural strength comparative analysis of two types of large container vessel lashing bridge |
| |
| ZHANG-Ding,HUANG-Wei and SHI Yong-Peng.Structural strength comparative analysis of two types of large container vessel lashing bridge[J].Ship Engineering,2015,37(S1):42-44. |
| |
| Authors: | ZHANG-Ding HUANG-Wei and SHI Yong-Peng |
| |
| Institution: | Merchant Ship Department,Marine Design Reaearch Institute of China,Merchant Ship Department,Marine Design Reaearch Institute of China,Merchant Ship Department,Marine Design Reaearch Institute of China |
| |
| Abstract: | Shear plate lashing bridge and type A inclined lashing bridge are commom for large container vessel. Based on the FEM program PATRAN/NASTRAN and the requirement of CCS, structural strength of the above two types of large container vessel lashing bridge are compared. It can be seen that the structural strength of shear lashing bridge is a little better than that of type A inclined lashing bridge. |
| |
| Keywords: | large container vessel shear plate lashing bridge type A inclined lashing bridge structural strength |
|
| 点击此处可从《船舶工程》浏览原始摘要信息 |
| 点击此处可从《船舶工程》下载免费的PDF全文 |
