| 干湿转换舱自动启闭舱口盖的设计及试验 |
| |
| 引用本文： | 范华涛,齐新,宋强,赵国良.干湿转换舱自动启闭舱口盖的设计及试验[J].船舶工程,2017,39(S1):19-22. |
| |
| 作者姓名： | 范华涛 齐新 宋强 赵国良 |
| |
| 作者单位： | 中国船舶科学研究中心 深海载人装备国家重点实验室,中国船舶科学研究中心 深海载人装备国家重点实验室,中国船舶科学研究中心 深海载人装备国家重点实验室,中国船舶科学研究中心 深海载人装备国家重点实验室 |
| |
| 摘 要： | 针对ROV干湿转换舱耐压壳体的结构形式及试验需求,设计了供ROV出入的自动启闭舱口盖；利用PTC Creo软件建立了三维参数化模型,通过ANSYS有限元分析对自动启闭舱口盖进行了结构强度和刚度校核、舱口盖密封性能研究。通过在压力筒内进行了试验验证,证明了该舱口盖结构合理,工作可靠。
|
| 关 键 词： | ROV干湿转换舱 自动启闭舱口盖 密封性能 压力筒试验 |
| 收稿时间： | 2016/9/22 0:00:00 |
| 修稿时间： | 2017/7/11 0:00:00 |
The Design and Experiment forAutomatic Opening and Closing Hatch Cover of the Wet-Dry-Conversion Compartment |
| |
| FAN Hua-tao,QI Xin,SONG Qiang and ZHAO Guo-liang.The Design and Experiment forAutomatic Opening and Closing Hatch Cover of the Wet-Dry-Conversion Compartment[J].Ship Engineering,2017,39(S1):19-22. |
| |
| Authors: | FAN Hua-tao QI Xin SONG Qiang and ZHAO Guo-liang |
| |
| Institution: | China Ship Scientific Research Center,China Ship Scientific Research Center,China Ship Scientific Research Center,China Ship Scientific Research Center |
| |
| Abstract: | The automatic opening and closing ROV access hatch cover was designed, for the ROV dry wet conversion cabin pressure hull structure forms and test requirements. The 3D model of the hatch cover was established with PTC Creo, which structure strength, rigidity and sealing performance were studied through ANSYS finite element analysis. The experiment verification was made in pressure canister, which proved the rationality and reliability of the hatch cover. |
| |
| Keywords: | ROV dry wet conversion cabin automatic opening and closing hatch cover sealing performance pressure canister experiment |
|
| 点击此处可从《船舶工程》浏览原始摘要信息 |
| 点击此处可从《船舶工程》下载免费的PDF全文 |
|
