| OGFC混合料设计参数影响因素研究 |
| |
| 引用本文： | 李晓娟,张宜洛,黄华,刘洪辉. OGFC混合料设计参数影响因素研究[J]. 路基工程, 2015, 0(3): 107. DOI: 10.13379/j.issn.1003-8825.2015.03.24 |
| |
| 作者姓名： | 李晓娟 张宜洛 黄华 刘洪辉 |
| |
| 作者单位： | 1.西安公路研究院, 西安 710065 |
| |
| 基金项目： | 陕西省交通科技建设项目 |
| |
| 摘 要： | 近年来有关专家学者对OGFC沥青混合料的物理及力学性能差异性研究较多,但对相应的成型因素对设计参数的影响研究较少。为此,针对OGFC-13混合料成型因素对其性能影响,进行了较为系统的研究。结果表明:对改性沥青拌制的OGFC混合料而言,最佳的施工温度应尽量控制在160~180℃之间;采用同一级配时,油石比的变化对马歇尔指标变化也有一定的影响;击实75次是临界值。
|
| 关 键 词： | OGFC混合料 设计参数 施工温度 马歇尔指标 性能影响 |
| 收稿时间： | 2019-11-07 |
Study on Factors Affecting Design Parameters for OGFC Mixture |
| |
| LI Xiaojuan,ZHANG Yiluo,HUANG Hua,LIU Honghui. Study on Factors Affecting Design Parameters for OGFC Mixture[J]. , 2015, 0(3): 107. DOI: 10.13379/j.issn.1003-8825.2015.03.24 |
| |
| Authors: | LI Xiaojuan ZHANG Yiluo HUANG Hua LIU Honghui |
| |
| Abstract: | There are more studies done by the related specialists and scholars on the difference between physical and mechanical properties of OGFC asphalt mixture but less study on the affect of the moulding factors on the design parameters in recent years. This Paper focuses on more systematic research on the effect of the moulding factors OGFC-13 mixture on its performance. The results show that: for OGFC mixture mixed with modified asphalt, the best construction temperature should be maintained between 160 ℃ to 180 ℃. When using the same gradation, the change in the asphalt aggregate ratio will have effect on the change of Marshall Index. Compacting 75 times is the critical value. |
| |
| Keywords: | OGFC mixture design parameter construction temperature Marshall index performance effect |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《路基工程》浏览原始摘要信息 |
|
点击此处可从《路基工程》下载免费的PDF全文 |
|
