Measuring social effective speed to improve sustainable mobility policies in developing countries

Over the last few decades, many developing countries have experienced car fleet growth, which has contributed to congestion, increased travel times, and deteriorated public transport reliability and punctuality. However, alternatives to urban mobility can be found by creating policies to stimulate sustainable transportation modes with equal opportunities for all citizens. In this paper, measures of social effective speeds are presented to improve sustainable urban mobility policies in developing countries. Data from the 2018 Origin-Destination Survey of the Metropolitan Region of Recife (Brazil) were used to estimate social effective speeds. The results showed that motorized modes had lower effective speed than non-motorized modes. In addition, total external costs were $2 billion USD per year. The social effective speed will be valuable if inserted in sustainable urban mobility policies in developing countries.     

On particulate emissions from moving trains in a tunnel environment

Increasing attention is being paid to airborne particles in railway environments because of their potential to adversely affect health. In this study, we investigate the contribution of moving trains to both the concentration and size distribution of particles in tunnel environments. Real-time measurements were taken with high time-resolution instruments at a railway station platform in a tunnel in Stockholm in January 2013. The results show that individual trains stopping and starting at the platform substantially elevate the particulate concentrations with a mobility diameter greater than 100 nm. Two size modes of the particulate number concentrations were obtained. A mode of around 170 nm occurs when a train moves, while the other mode peaks at about 30 nm when there is no train in the station. By using principal component analysis (PCA), three contributing sources were identified on the basis of the classification of the sizes of the particles, namely railway-related mechanical wear, suspension due to the movement of trains and sparking of electric-powered components. It is concluded that the particulate matter released by individual moving trains is a key contributor to fine particles (100–500 nm) on the railway platform in a tunnel.     

Mitigating air pollution impacts of passenger ferries

Increasing regional mobility demand amid rising roadway congestion has motivated plans for passenger ferry expansion and modernization in many parts of the US. While this trend applies to ferry systems in Alaska, New York, Boston, and Washington state, efforts to expand ferry service in the San Francisco Bay Area are unique in scale and vision. Integrating ferry service into the regional, door-to-door transit system can significantly increase water-crossing capacity for commuters. However, to realize this potential, the ferry industry must meet several challenges associated with growth, including environmental impacts. In particular, concern over air pollution emissions from marine engines is motivating new comparisons between ferries and other transportation modes in terms of both mobility and air pollution. This paper describes the current debate about ferry system operation and expansion, and presents a parametric analysis comparing existing, uncontrolled ferry emissions to automobiles. Under all reasonable assumptions, we show that diesel-powered ferries without emissions controls will produce more NO_x and PM, but less CO per passenger-trip than if those people commuted by car under current conditions. This paper also projects the emissions from the expanded ferry system proposed for the San Francisco Bay Area, showing that a larger ferry fleet equipped with new engines meeting future EPA emissions standards could become one of the major non-road NO_x sources in the region. We conclude by outlining the alternatives and challenges to reduce ferry emissions so that they are more comparable to automobile emissions. Policy implications of these alternatives are also discussed.     

Long-term behavior of particulate matters at urban roadside and background locations in Seoul,Korea

The concentrations of particulate matter, PM_2.5, PM₁₀, and TSP at an urban roadside and an urban background station are analyzed. Data collected over a 10 year period are analyzed. The concentrations of the particulates measured at the urban site are systematically larger than at the background station. The mean PM values at the former also exhibit a slight fall over the decade unlike those at the background station. Overall, the particulate matters at both locations are in an intermediate range of global level, e.g., approximately two times lower than those in other Asian regions but higher than in Europe.     

An integrated model system and policy evaluation tool for maximizing mobility under environmental capacity constraints: A case study in Dalian City,China

This paper presents an integrated model system for mobility maximization based on a quantified specification of environmental capacity, and evaluates policy interaction and effectiveness by simulating a number of policy scenarios. The system is designed to specify the maximum level of car ownership and number of trips by private and public modes subject to an environmental capacity constraint defined as the frontier emission under maximum system efficiency. Four types of hypothetical policies (population change, urban sprawl, land-use pattern and network improvement) are designed and the effects of 13 policy scenarios are simulated using data of Dalian City, China. Results reveal that the integrated model system reacts sensitively to policy interventions. The urban sprawl reflected in a changing residential distribution from central to suburban areas is most instrumental from the perspective of pollution alleviation. If the goal is to simultaneously reduce emissions while accommodating mobility, two combinational policy scenarios outperform all others.     

The influence of e-carsharing schemes on electric vehicle adoption and carbon emissions: An emerging economy study

Moving toward sustainable mobility, the sharing economy business model emerges as a prominent practice that can contribute to the transition to sustainability. Using a system dynamics modeling approach, this paper investigates the impacts of an e-carsharing scheme in carbon emissions and in electric vehicle adoption. We study the VAMO scheme located in Fortaleza, Brazil, as the first e-carsharing scheme in the country. We study two policies combined: a VAMO planned growth policy and a retirement policy for conventional vehicles. Our results show that the VAMO incentive policy is an important factor to reduce emissions and to increase awareness of electric vehicles, highlighting the role of the government as an institutional entrepreneur, stimulating and sustaining the VAMO scheme. The retirement policy in combination with the VAMO incentive policy obtained the best results in our simulations, reducing 29% of CO₂ emissions and increasing 36% electric vehicle adoption, when compared to the business-as-usual scenario. The main conclusions are that such e-carsharing schemes offer direct and indirect benefits to urban mobility (specially to electric vehicle adoption) and that they depend on how the government supports them.     

Atmospheric impact of ship traffic in four Adriatic-Ionian port-cities: Comparison and harmonization of different approaches

Shipping is a growing transport sector representing a relevant share of atmospheric pollutant emissions at global scale. In the Mediterranean Sea, shipping affects air quality of coastal urban areas with potential hazardous effects on both human health and climate. The high number of different approaches for investigating this aspect limits the comparability of results. Furthermore, limited information regarding the inter-annual trends of shipping impacts is available. In this work, an approach integrating emission inventory, numerical modelling (WRF-CAMx modelling system), and experimental measurements at high and low temporal resolution is used to investigate air quality shipping impact in the Adriatic/Ionian area focusing on four port-cities: Brindisi and Venice (Italy), Patras (Greece), and Rijeka (Croatia). Results showed shipping emissions of particulate matter (PM) and NOx comparable to road traffic emissions at all port-cities, with larger contributions to local SO₂ emissions. Contributions to PM_2.5 ranged between 0.5% (Rijeka) and 7.4% (Brindisi), those to PM₁₀ were between 0.3% (Rijeka) and 5.8% (Brindisi). Contributions to particle number concentration (PNC) showed an impact 2–4 times larger with respect to that on mass concentrations. Shipping impact on gaseous pollutants are larger than those to PM. The contribution to total polycyclic aromatic hydrocarbon (PAHs) concentrations was 82% in Venice and 56% in Brindisi, with a different partition gas-particle because of different meteorological conditions. The inter-annual trends analysis showed the primary contribution to PM concentrations decreasing, due to the implementation of the European legislation on the use of low-sulphur content fuels. This effect was not present on other pollutants like PAHs.     

Assessing the importance of transportation activity data for urban emission inventories

The aim of this research is the implementation of a GPS-based modelling approach for improving the characterization of vehicle speed spatial variation within urban areas, and a comparison of the resulting emissions with a widely used approach to emission inventory compiling. The ultimate goal of this study is to evaluate and understand the importance of activity data for improving the road transport emission inventory in urban areas. For this purpose, three numerical tools, namely, (i) the microsimulation traffic model (VISSIM); (ii) the mesoscopic emissions model (TREM); and (iii) the air quality model (URBAIR), were linked and applied to a medium-sized European city (Aveiro, Portugal). As an alternative, traffic emissions based on a widely used approach are calculated by assuming a vehicle speed value according to driving mode. The detailed GPS-based modelling approach results in lower total road traffic emissions for the urban area (7.9, 5.4, 4.6 and 3.2% of the total PM10, NO_x, CO and VOC daily emissions, respectively). Moreover, an important variation of emissions was observed for all pollutants when analysing the magnitude of the 5th and 95th percentile emission values for the entire urban area, ranging from −15 to 49% for CO, −14 to 31% for VOC, −19 to 46% for NO_x and −22 to 52% for PM10. The proposed GPS-based approach reveals the benefits of addressing the spatial and temporal variability of the vehicle speed within urban areas in comparison with vehicle speed data aggregated by a driving mode, demonstrating its usefulness in quantifying and reducing the uncertainty of road transport inventories.     

Modeling travel behavior by the structural relationships between lifestyle,built environment and non-working trips

In the context of sustainable urban transport in developing countries, individuals’ travel behavior faces multiple factors which influence their mobility patterns. Recognizing these factors could be a favorable method to organize more regular and sustainable trip patterns. This study aims to identify the less well-known lifestyle along with more popular built environment as the main factors which shape travel behaviors. Employing data from 900 respondents of 22 urban areas in city of Shiraz, Iran, this paper explores travel behaviors as non-working trip frequencies by different modes. Results of structural equation model indicate a strong significant effect of individual’s lifestyle patterns on their non-working trips. However, built environment impact on travel behavior is small compared to lifestyle. Besides, other variables such as travel attitudes and socio-economic factors stay crucial in the mode choice selection. These findings indicate the necessity of regarding lifestyle orientations in travel studies as well as objective factors such as land use attributes.     

Multi‐criteria analysis procedure for sustainable mobility evaluation in urban areas

This paper proposes a procedure to evaluate sustainable mobility in urban areas. A set of indicators according to three dimensions of sustainability, i.e., environment, economics, and social aspects, are proposed to evaluate mobility in urban areas. The sustainable mobility evaluation is based on an Index calculated through a weighted multi‐criteria combination procedure. A group of specialists in Brazil was involved in the development of the Index by defining the weights for the criteria. An application of the methodology in the city of Belo Horizonte, capital of the State of Minas Gerais, with 2.24 million inhabitants, is presented to validate the methodology.     

Levels of ultrafine particles in the Taipei Rapid Transit System

Ultrafine particle number concentrations are measured at five stations and inside trains on four routes in the Taipei Rapid Transit System during October–December 2007. The results indicate that there are no additional emission sources of ultrafine particle on the platforms. Ultrafine particle levels at a ground level station were, however, adversely affected by traffic outside of the station. Moreover, particles can enter the underground stations via the subway tunnels resulting in high levels during weekdays.     

Long-memory characteristics of urban roadside air quality

Carbon monoxide is a major contributor to air pollution in urban cities, particularly at the roadside. Hourly, monthly and seasonal mean carbon monoxide concentration data are collected from a roadside air monitoring station in Hong Kong over 7-years. The station is a few metres from a major intersection surrounded by tall buildings. In particular, hourly patterns of concentrations on different days of the week are investigated. The data show that hourly carbon monoxide concentrations resemble the traffic pattern of the area and tend to be lower in the summer. Using a seasonal autoregressive integrated moving average models shows that the daily traffic cycle strongly influences concentrations. Further, it is found that urban roadside carbon monoxide monitoring data exhibits a long-memory process, suggesting that a model incorporating long memory and seasonality effects is needed simulate urban roadside air quality.     

Exploration of correlation between environmental factors and mobility at signalized intersections

Characterizing the relationship between environmental factors and mobility is critical for developing a sustainable traffic signal control system. In this study, the authors investigate the correlation of the environmental impacts of transport and mobility measurements at signalized intersections. A metamodeling-based method involving experimental design, simulations, and regression analysis was developed. The simulations, involving microscopic traffic modeling and emission estimation with an emerging emission estimator, provide the flexibility of generating cases with various intersection types, vehicle types, and other parameters such as driver behavior, fuel types, and meteorological factors. A multivariate multiple linear regression (MMLR) analysis was applied to determine the relationship between environmental and mobility measurements. Given the limitations of using the built-in emissions modules within current traffic simulation and signal optimization tools, the metamodeling-based approach presented in this paper makes a methodological contribution. The findings of this study set up the base for extensive application of simulation optimization to sustainable traffic operations and management. Moreover, the comparison of outputs from an advanced estimator with those from the current tool recommend improving the emissions module for more accurate analysis (e.g., benefit-cost analysis) in practical signal retiming projects.     

Comparison of particle mass and number emissions from a diesel transit bus across temporal and spatial scales

This study analyzes particle number and mass emission rates measured from the exhaust of a 2002 diesel transit bus in real-world driving conditions. The dynamics of the particle number and mass emission rates are examined at resolved temporal and spatial scales across an urban arterial, a rural arterial and a divided freeway. Time-based particle number and mass emission rates were highest on the freeway, but the distance-based particle emission rates of emission/km at “hot-spots” for exposure assessment for selected 50-m road segments occurred at intersections when the bus accelerated from a stop or traveled up high grades. Comparisons of particle mass and number emission rates between idling and acceleration indicate that unless the bus is extending idling for several minutes, public exposure to bus particle emissions near bus stops can be mainly attributed to accelerations. Generally, particle number and mass emissions rates are highly correlated both temporally and spatially. Some deviations occur because particle mass emissions are highly elevated during sustained fueling events such as traveling on high grades and during sustained accelerations, while particle number emissions are more sensitive to fuel and engine speed fluctuations.     

HGM-D型高摩合成闸瓦在肯尼亚蒙内铁路的运用

介绍了肯尼亚蒙内铁路概况及线路特点,HGM-D型高摩合成闸瓦性能参数以及在蒙内铁路C70E、X70、NX70型货车上运用验证情况.验证表明HGM-D型高摩合成闸瓦有效降低车轮和闸瓦磨耗量以及闸瓦金属镶嵌物,提高了车辆运行品质和制动效能.     

Why do urban travelers select multimodal travel options: A repertory grid analysis

The increasing number of travelers in urban areas has led to new opportunities for local government and private mobility providers to offer new travel modes besides and in addition to traditional ones. Multimodal travel provides an especially promising opportunity. However, until now the underlying reasons why consumers choose specific alternatives have not been fully understood. Hence, the design of new travel modes is mainly driven by obvious criteria such as environmental friendliness and convenience but might not consider consumers’ real or latent needs. To close this research gap, sixty in-depth interviews with urban travelers were conducted. To identify the perceptual differences of customers among different travel modes, the repertory grid technique as an innovative, structured interview method was applied. Our data show that urban travelers distinguish and select travel alternatives based on 28 perceptual determinants. While some determinants associated with private cars such as privacy, flexibility and autonomy are key indicators of travel mode choice, costs and time efficiency also play a major role. Furthermore, by comparing travel modes to an ideal category, we reveal that some perceptual determinants do not need to be maximized in order to fulfill customer needs optimally. A comparison of consumers’ perceptual assessments of alternative travel modes identifies specific advantages and disadvantages of all alternatives, and provides fruitful implications for government and private mobility providers.     

Modeling real-time human mobility based on mobile phone and transportation data fusion

Even though a variety of human mobility models have been recently developed, models that can capture real-time human mobility of urban populations in a sustainable and economical manner are still lacking. Here, we propose a novel human mobility model that combines the advantages of mobile phone signaling data (i.e., comprehensive penetration in a population) and urban transportation data (i.e., continuous collection and high accuracy). Using the proposed human mobility model, travel demands during each 1-h time window were estimated for the city of Shenzhen, China. Significantly, the estimated travel demands not only preserved the distribution of travel demands, but also captured real-time bursts of mobility fluxes during large crowding events. Finally, based on the proposed human mobility model, a predictive model is deployed to predict crowd gatherings that usually cause severe traffic jams.     

Increase in particle number emissions from motor vehicles due to interruption of steady traffic flow

We assess the increase in particle number emissions from motor vehicles driving at steady speed when forced to stop and accelerate from rest. Considering the example of a signalized pedestrian crossing on a two-way single-lane urban road, we use a complex line source method to calculate the total emissions produced by a specific number and mix of light petrol cars and diesel passenger buses and show that the total emissions during a red light is significantly higher than during the time when the light remains green. Replacing two cars with one bus increased the emissions by over an order of magnitude.     

Customers’ selections between premium electric taxis and liquefied petroleum gas taxis

Reducing roadside emissions is a common challenge in metropolitan cities. In Hong Kong, conventional liquefied petroleum gas taxis are one of the main contributors to roadside emissions as they operate on the streets 24 h a day with a long daily driving mileage. Moreover, these taxis suffer from a severely poor service reputation. To enhance the environmental friendliness and service quality of the taxi industry, this study explores the market potential of operating premium electric taxis in the dispatching mode. A stated preference survey was conducted to 1410 taxi customers about their taxi-riding choices between premium electric taxis and conventional liquefied petroleum gas taxis. In total, 5640 observations were obtained and used to develop a series of binary logistic regression models with different model formulations for the determination of the significant factors influencing customers’ selections. The findings indicate that walk time to and wait time for taxis were the most critical concerns to the customers, and they were more willing to take premium taxis if their journey distance was longer and their desired improvement on taxi service quality was greater. The socio-demographic status of taxi customers also influences their choices. The associated policy implications are discussed for promoting taxis with better service quality and fewer roadside emissions. The findings provide some policy insights to other international cities that have a similar taxi market to Hong Kong.     

Impacts of plug-in electric vehicles in the portuguese electrical grid

Powertrain electrification is currently the best alternative to ensure sustainable energy efficient personal mobility, increasing the integration of intermittent Renewable Energy Sources (RES), improving air quality in urban centres, and reducing greenhouse gas emissions from the transport sector and their dependence on fossil energy sources. With the increasing number of Electric Vehicles (EVs) available from automotive manufacturers, one key question that arises is the capability of the electrical grid to feed the increasing energy demand of the EV fleet without major investments. This paper shows that a progressive penetration of EVs, even at a rapid rate, is perfectly possible for vehicles that offer autonomy, energy consumption and charging characteristics that are currently available in the market. This analysis is based on data acquired during a year, using a Plug-in Hybrid Electric Vehicle (PEV) as the only vehicle for a typical, Southern European Portuguese family. The energy consumption of a gasoline and electric vehicle is presented, as well as its impact on the household load pattern. An analysis of the impact on the grid is also presented, considering several penetration rates (100 thousand, 500 thousand and 1 million vehicles). As well as the avoided use of fossil fuel per vehicle and consequent reduction in overall emissions when compared with a conventional vehicle.