共查询到18条相似文献,搜索用时 352 毫秒
1.
风暴模型是Tomita等提出的用来评估船舶结构疲劳强度的一种随机波浪载荷简化模型,它能表达波浪载荷是与时间相关的随机过程。文中介绍了风暴模型及波浪诱导应力短期分布的基本特征。将风暴模型和裂纹扩展率单一曲线模型及焊趾表面裂纹应力强度因子的计算方法结合起来,探讨了复杂载荷作用下船舶结构疲劳裂纹扩展预报方法。并用权函数法计算了给定残余应力分布的表面裂纹应力强度因子。预报了对接焊接接头焊趾处表面裂纹在风暴波浪载荷作用下的疲劳裂纹扩展行为,结果表明风暴的大小、顺序,初始裂纹尺寸及残余应力对裂纹扩展行为影响明显。合理的风暴模型参数及初始裂纹尺寸的确定对船舶结构的疲劳寿命预报是非常重要的。 相似文献
2.
变幅载荷作用下焊接接头疲劳寿命预测方法 总被引:8,自引:4,他引:4
船舶与海洋结构物在其服役过程中受到波浪等载荷的交变作用而引起结构的疲劳损伤.检测结果表明船舶及海洋结构的疲劳热点部位大多数是在构件相互连接的焊缝焊趾处.因此,研究典型接头表面裂纹应力强度因子统一计算方法以及变幅载荷作用下表面裂纹扩展规律对船舶与海洋结构物的寿命预测是十分重要的.本文讨论了裂纹闭合及开口比的计算,在Newman有效应力强度因子计算方法的基础上,提出了考虑因素更全面的有效应力强度因子幅计算式以及变幅载荷作用下船舶与海洋结构物典型焊接接头疲劳裂纹扩展寿命预测模型. 相似文献
3.
4.
船体板的总体断裂破坏往往是低周疲劳破坏与累积塑性破坏两种破坏模式耦合作用的结果,故在船体板低周疲劳裂纹扩展寿命评估中,其基于累积塑性应变的船体板低周疲劳裂纹扩展寿命分析能够更为符合实际地评估船体板的总体断裂承载能力。船体板低周疲劳裂纹扩展寿命由宏观可检测裂纹扩展到临界裂纹而发生破坏这段区间的寿命。船体在实际航行中受到多次波浪外载作用而使其进入塑性变形不断累积或不断反复的破坏过程,并最终导致低周疲劳裂纹的萌生及扩展而使结构破坏,其破坏形式分别对应于增量塑性变形破坏(或棘轮效应)或交变塑性变形破坏(或低周疲劳)。局部塑性变形的累积会加剧低周疲劳裂纹不断扩展,因而基于累积塑性破坏研究船体板低周疲劳扩展寿命更为合理。文中以船体板单次循环载荷后塑性应变大小为基础,依据累积递增塑性破坏过程及弹塑性理论,计算经过N次变幅循环载荷后船体板累积塑性应变值,结合循环应力—应变曲线获得相应的稳定的迟滞回线,确定裂纹尖端应力应变曲线及确定相关塑性参量并依据选取的断裂判据判定裂纹扩展。建立循环载荷下基于累积递增塑性破坏的船体板低周疲劳裂纹扩展寿命的计算模型考虑应力比对此裂纹扩展寿命计算模型的影响。由该方法计算出的疲劳裂纹扩展寿命将对正确预估船舶结构的低周疲劳强度从而提高船舶安全性有重要意义。 相似文献
5.
海洋钢结构疲劳裂纹扩展预报单一扩展率曲线模型 总被引:3,自引:0,他引:3
采用基于疲劳裂纹扩展的疲劳寿命预报方法对海洋钢结构的安全寿命进行评估,首先要解决变幅载荷作用下的裂纹扩展率问题,其次是复杂应力场中的应力强度因子计算问题.文章将裂纹扩展率单一曲线模型结合焊趾表面裂纹应力强度因子的计算方法来探讨复杂载荷作用下海洋钢结构的疲劳寿命预报问题.裂纹扩展率单一曲线模型的思想是将任意载况下的应力强度因子等效到R=0的应力强度因子,并假定超载不影响材料的裂纹扩展率,而是使等效应力强度因子幅减小.使得复杂载荷下的疲劳寿命预报也仅需要对应于R=0时的裂纹扩展率材料常数,从而解决复杂载荷下裂纹扩展率材料常数的确定问题.文中给出了适合于海洋钢结构的裂纹扩展率曲线,焊趾表面裂纹应力强度因子以及残余应力引起的应力强度因子的计算方法. 相似文献
6.
《船舶力学》2015,(6)
船体板的总体断裂破坏往往是低周疲劳破坏与累积塑性破坏两种破坏模式耦合作用的结果,故在船体板低周疲劳裂纹扩展寿命评估中,其基于累积塑性应变的船体板低周疲劳裂纹扩展寿命分析能够更为符合实际地评估船体板的总体断裂承载能力。船体板低周疲劳裂纹扩展寿命由宏观可检测裂纹扩展到临界裂纹而发生破坏这段区间的寿命。船体在实际航行中受到多次波浪外载作用而使其进入塑性变形不断累积或不断反复的破坏过程,并最终导致低周疲劳裂纹的萌生及扩展而使结构破坏,其破坏形式分别对应于增量塑性变形破坏(或棘轮效应)或交变塑性变形破坏(或低周疲劳)。局部塑性变形的累积会加剧低周疲劳裂纹不断扩展,因而基于累积塑性破坏研究船体板低周疲劳扩展寿命更为合理。文中以船体板单次循环载荷后塑性应变大小为基础,依据累积递增塑性破坏过程及弹塑性理论,计算经过N次变幅循环载荷后船体板累积塑性应变值,结合循环应力—应变曲线获得相应的稳定的迟滞回线,确定裂纹尖端应力应变曲线及确定相关塑性参量并依据选取的断裂判据判定裂纹扩展。建立循环载荷下基于累积递增塑性破坏的船体板低周疲劳裂纹扩展寿命的计算模型考虑应力比对此裂纹扩展寿命计算模型的影响。由该方法计算出的疲劳裂纹扩展寿命将对正确预估船舶结构的低周疲劳强度从而提高船舶安全性有重要意义。 相似文献
7.
船舶作为一种大型焊接结构,其疲劳热点部位的应力应变场分布很复杂,要预报这些部位的裂纹疲劳扩展寿命,必须解决复杂场中裂纹的应力强度因子计算及其裂纹扩展方向问题.该文对船舶肘板处两种不同原因产生的裂纹的扩展路径、扩展速率进行了研究.裂纹扩展方向用第一主应力准则确定,在裂纹扩展方向上给定不同的裂纹增量,得到不同长度裂纹的复合裂纹等效应力强度因子,并拟合这些计算结果得出船舶肘板的应力强度因子计算式.结合裂纹扩展率单一曲线模型对肘板裂纹扩展寿命进行了预报,预报结果与实验结果符合得较好,说明所采用的方法可行.对建立船舶典型节点的裂纹扩展寿命预报方法有参考价值. 相似文献
8.
在船舶和海洋工程结构中,裂纹扩大时的载荷流泄现象已被大尺度疲劳试验中裂纹扩展速度减慢所证实。影响疲劳裂纹扩展的因素具有随机性质,因而研究载荷流泄对船舶和海洋工程结构疲劳可靠性的影响是有意义的。本文用Paris公式,结合改进的第二水准法,计算了一个实例,给出了考虑和不考虑载荷流泄疲劳可靠性分析的两种结果。结果的区别表明,如果要期望得到更合理的结果,则在船舶和海洋工程结构的疲劳分析中必须计及载荷流泄。 相似文献
9.
文章以船舶折角型节点为研究对象,运用有限元软件WALCS和PATRAN分别预报某船的水动力响应和结构热点应力响应.为避免计算表面裂纹应力强度因子时需要在PATRAN有限元模型中疲劳热点区域采用体单元建模,文中提出了一种计算波浪载荷下船海结构物三维表面裂纹应力强度因子而无需在PATRAN中建立体模型的方法,并通过与广泛认可的经验公式对比验证其精度.将此方法应用于该船船舯底边舱折角处表面裂纹应力强度因子计算,计算并总结出波浪载荷下该类节点处表面裂纹应力强度因子的无量纲计算经验公式.应用一种基于谱分析构建结构疲劳载荷谱的方法,结合单一曲线模型对该节点进行裂纹扩展计算.计算结果表明:该船船舯底边舱折角疲劳寿命不满足设计要求,建议对节点进行改进. 相似文献
10.
《船舶力学》2017,(9)
文章以船舶折角型节点为研究对象,运用有限元软件WALCS和PATRAN分别预报某船的水动力响应和结构热点应力响应。为避免计算表面裂纹应力强度因子时需要在PATRAN有限元模型中疲劳热点区域采用体单元建模,文中提出了一种计算波浪载荷下船海结构物三维表面裂纹应力强度因子而无需在PATRAN中建立体模型的方法,并通过与广泛认可的经验公式对比验证其精度。将此方法应用于该船船舯底边舱折角处表面裂纹应力强度因子计算,计算并总结出波浪载荷下该类节点处表面裂纹应力强度因子的无量纲计算经验公式。应用一种基于谱分析构建结构疲劳载荷谱的方法,结合单一曲线模型对该节点进行裂纹扩展计算。计算结果表明:该船船舯底边舱折角疲劳寿命不满足设计要求,建议对节点进行改进。 相似文献
11.
Fatigue crack propagation in marine structures is obviously governed by mechanics of the considerably different four levels of multi-scale problems. Problems of structural response to environmental loads have length scale of several hundred meters, whereas possible detectable size of cracks from initial defects in a weld is of the order of millimeters. Once a fatigue crack initiates, crack tip plasticity is of the order of several grain sizes, while the resulting fatigue crack growth in each load cycle is of the order of nanometers. In our previous work, the first author and their associates have developed the so-called CP-System, which can treat the first two multi-level problems as an integrated system. Furthermore, we have incorporated the third level of mechanics by using the stress intensity range corresponding to the repeated tensile plastic deformation ahead of the crack tip. In the present paper, we shall discuss a more rational integral equation-based formulation in order to integrate the third and fourth levels of micro-mechanics to the first two levels of continuum mechanics.The method is then applied to fatigue crack propagation under the effects of random sequence of clustered loading. As an example of the random sequence of clustered load, we shall use the so-called “storm model”. In the crack propagation simulation, we have to take into account of the plastic wake on the crack surfaces, whose thicknesses are influenced by the material parameters involved in the crack growth model. These parameters are first identified by the fatigue tests under combined constant and random loading using a CT specimen. Then, fatigue crack growth is investigated by numerical simulation and fatigue tests for various random sequences of clustered loading. The experimental and numerical results agree quite well with each other, and fatigue crack propagation is found to be considerably retarded under random sequence loading, so that the conventional equivalent stress approach may provide rather conservative results to the real seaway loading. 相似文献
12.
The authors have developed a simulation program, CP-System, for multiple cracks propagating in a three-dimensional stiffened
panel structure, where through-the-thickness crack propagation is formulated as a two-dimensional in-plane problem, and the
crack propagation behavior is simulated by step-by-step finite element analyses. In order to evaluate the fatigue lives of
marine structures accurately, it is necessary to take into account the load histories induced by sea waves, which may be composed
of a random sequence of certain clustered loads with variable stress range. In the proposed crack growth model, the crack
opening and closure behavior is simulated by using the modified strip yielding model, and the effective tensile plastic stress
intensity range, ΔK
RP, is calculated by considering the contact of plastic wake along the crack surfaces. The adequacy of the proposed crack growth
model is examined by comparison with fatigue tests under non-constant-amplitude loading. The usefulness of the developed method
is demonstrated for a ship structural detail under certain simulated load sequences. It is shown that the fatigue crack growth
of a ship structure is significantly retarded due to the load interaction effects, so that the conventional method for fatigue
life assessment may predict a relatively conservative fatigue life of a structure. 相似文献
13.
14.
450MPa级船体钢焊缝疲劳试验研究 总被引:1,自引:1,他引:0
通过对450MPa级船体用钢母体试件、焊缝试件在波浪随机载荷和均方根等效载荷下的疲劳裂纹扩展规律的试验和模拟计算,结果表明用均方根等效载荷替代波浪随机载荷下的疲劳裂纹扩展规律是一种安全有效的方法,并且焊缝金属在抵御疲劳裂纹扩展方面优于母材金属。 相似文献
15.
16.
It is of continuing importance for ship structural design to establish a system to compute the growth behavior of fatigue cracks propagating in structural details. In the present paper, a simulation program is developed for multiple fatigue cracks propagating in a three-dimensional stiffened panel structure, where it can predict fatigue crack lives and paths by taking into account the interaction of multiple cracks, load shedding during crack propagation and welding residual stress. Various fatigue crack propagations in longitudinal stiffeners of ship structures are investigated by both the present simulation method and experiments. From these results, it is found that the crack propagation may considerably change, depending on the loading conditions, structural details and residual stress distributions. This means that one could possibly manage to avoid fatal damage of the skin-plate by properly designing the structural details. Furthermore, these results may imply a possibility to realize a rational fatigue crack management if one can estimate the fatigue crack-propagation behavior during the ship lifecycle. The present simulation program may offer a useful numerical tool for this purpose. 相似文献
17.
Fatigue crack propagation behavior under superimposed stress histories containing different frequency components with several mean stress conditions was investigated. Numerical simulation of fatigue crack propagation based on an advanced fracture mechanics approach using the RPG (Re-tensile Plastic zone Generating) stress criterion for fatigue crack propagation was improved to extract the effective part from the applied stress history for fatigue crack propagation. The parameter, which is based on the plastic hysteresis energy consumed in the vicinity of a crack tip, was applied and implemented into the numerical simulation code of fatigue crack propagation. Fatigue crack propagation tests under various superimposed stress conditions with several mean stress conditions were performed and compared with the fatigue crack propagation histories obtained from the improved numerical simulations. These comparisons show the validity of the proposed procedure for extracting the effective stress history from the superimposed stress histories with different frequency components and mean stresses. Additionally, practical fatigue strength evaluations based on the linear cumulative fatigue damage parameter were conducted to investigate the tendency of the fatigue damage value under these stress conditions. 相似文献
18.
本文研究了腐蚀与疲劳载荷耦合作用下自升式平台桩腿服的可靠性问题。采用ANSYS对自升式海洋平台桩腿结构进行建模,根据平台服役海域的波浪散布图对桩腿结构的工况进行划分,确定浪溅区桩腿结构的疲劳关键节点及其等效应力;以桩腿材料E690高强钢为对象,进行腐蚀疲劳裂纹扩展实验,获得了不同环境下的疲劳裂纹扩展参数;提出了基于断裂力学的浪溅区桩腿关键节点的时变可靠性模型,与采用现有腐蚀模型的桩腿时变可靠性指标进行了对比,结果表明了本文所提方法能有效地反映平台桩腿服役期间关键节点的时变可靠性变化趋势,为平台在服役期间的安全运行与维护保养提供了理论指导。 相似文献