Discussion on the parameters of design waves

In order to respond the discredit on the design wave standard and to recommend new consideration on design wave parameters,based on the long-term distribution of statistic characteristics of waves and the short-term probability properties of sea state defined by giving the return period,the calculation of the return period,the height,the period,and the oceanic wave parameters of the design wave and the forecasting methods are discussed in this paper.To provide references for the operation reliability of floating structures in the extreme sea state,the method of determining the design wave parameters is resurveyed.A proposal is recommended that the design wave,which can be either significant wave with 500-year of the return period,or the maximum wave with 1/N of exceeding probability,100-year of the return period,can be applied in the engineering design practice.     

Research on the influence of action between fin and anti-rolling tank on the integrated stabilization effect

Through analyzing the roll model of the integrated system of fin and anti-rolling tank, this paper uses binomial equation to simplify the module and check how the approximate parameters simulate the original function. Based on the simplified module, the influence of fin and anti-rolling tank on the coefficient items of the roll module is discussed, and the influencing factors between fin and anti-rolling tank are analysed. And through simulation, the influence of action between fin and anti-rolling tank on the static characteristics, and the integrated stabilization effect, are analyzed.     

An Experimental Investigation on the Stability of Foundation of Composite Vertical Breakwaters

A series of 2D model tests were conducted to assess the foundation stability of composite vertical breakwaters. In this paper, the results from the experimental study are presented conjointly with a formula to estimate the stability number of foundation, which is the most important parameter for evaluation of foundation stability of such structures. The influences of wave height, wave period and the berm width on the stability of composite breakwaters with different armor stone sizes were investigated. Forty-five tests were performed to cover the influences of these parameters. According to the present research, berm width is a significant parameter concerning erosion of armor foundation. As the berm width increases, the amount of berm erosion decreases. Comparisons are made between results of present study and the estimated stability number proposed by Kimura et al.(1994), which is extension of Tanimoto formula. Results show that the later formula underestimates the stability number. However, by applying an enhancement factor about 1.7 meters to Kimura et al. formula, results correlated with the present experimental results..     

Effects of the ‘Belt and Road’ initiative on the wine import logistics of China

China’s Belt and Road (BR) initiative is expected to facilitate international trade between the countries involved. In this study, we review the special requirements of wine logistics and the market growth potential of wine consumption in China. A model minimizing generalized logistical costs is developed and applied to wine imports in China, so that the best candidate cities in which to locate transport gateways and distribution centers can be identified. Our analysis suggests that the most preferred gateways are Shanghai, Tianjin, Guangzhou, and Hong Kong, which all have similar delivery costs. In comparison, Beijing and Chongqing have much higher delivery costs, mainly because they do not have good access to marine transport and/or efficient domestic distribution networks. For long-distance intercontinental transport of large volumes of wine, marine shipping remains the only viable delivery mode. However, wine distribution within China extensively uses air, road, and water transport. Therefore, cities with excellent multi-modal transport services are better positioned to become wine logistics gateways. Our study also highlights the importance of value-added services and good government support, which are important factors that influence distribution costs and quality.     

Application of the VOF method based on unstructured quadrilateral mesh

To simulate two-dimensional free-surface flows with complex boundaries directly and accurately, a novel VOF (Volume-of-fluid) method based on unstructured quadrilateral mesh is presented. Without introducing any complicated boundary treatment or artificial diffusion, this method treated curved boundaries directly by utilizing the inherent merit of unstructured mesh in fitting curves. The PLIC (Piecewise Linear Interface Calculation) method was adopted to obtain a second-order accurate linearized reconstruction approximation and the MLER (Modified Lagrangian-Eulerian Re-map) method was introduced to advect fluid volumes on unstructured mesh. Moreover, an analytical relation for the interface’s line constant vs. the volume clipped by the interface was developed so as to improve the method’s efficiency. To validate this method, a comprehensive series of large straining advection tests were performed. Numerical results provide convincing evidences for the method’s high volume conservative accuracy and second-order shape error convergence rate. Also, a dramatic improvement on computational accuracy over its unstructured triangular mesh counterpart is checked.     

Research on the coefficient of sound absorption in turbid water

China’s coastal waters are turbid and the properties of the seabed are complex. This negatively impacts the performance of underwater detection equipment. The properties of sound absorption in turbid water are not well understood. In this paper, the coefficient of sound absorption in turbid water was measured by the reverberation technique. All work was done in a reverberation barrel made of seamless aluminum. First, pure water was poured into the reverberation barrel and its reverberation time measured. Next, various concentrations of turbid water were poured into the barrel and their reverberation time measured. After all data had been gathered, the coefficient of sound absorption in turbid water of different concentrations was calculated. From this we determined a law of sound absorption in turbid water as summarized in the paper.     

Influence of exhaust parameters on mid-infrared radiative characteristics of the plume北大核心CSCD

[Objectives] Infrared radiative (IR) characteristics of the plume are the main part of ship infrared radiation. The influence analysis of exhaust parameters on radiative characteristics is very important for developing ship stealth and anti-stealth technology. [Methods]In this work, the line-by-line method is applied to solve radiative transfer in gaseous media. Infrared radiative images of plumes under different temperatures and flow rates are obtained. Radiance, spectral radiative intensity, and spectrum-integrated radiative intensity over 3−5 µm are calculated and analyzed. [Results]Results show that there are obvious peaks of spectral radiative intensity curves at 4.18µm and 4.43 µm, and an obvious valley at 4.26 µm. [Conclusions] The infrared radiation characteristics of the ships exhaust plume are greatly affected by the exhaust temperature, but less affected by the exhaust flow rate. © 2023 The Author(s).     

Study on the design method of the jack-up’s x-type cantilever allowable load nephogram

The extending of a cantilever and transverse moving of a drilling floor enable the jack-up to operate in several well positions after the Jack-up has pitched. The cantilever allowable load nephogram is the critical reference which can evaluate the jack-up＇s drilling ability, design the cantilever structure and instruct a jack-up manager to make the operations safe. The intent of this paper is to explore the interrelationships between the cantilever position, drilling floor and the loads including wind force, the stand set-back weight etc., through analyzing the structure and load characteristics of the x-type cantilever and the simplified mechanics model with the restriction of the maximum moment capacity of the cantilever single side beam. Referring to several typical position designs load values, the cantilever allowable load nephogram is obtained by using the suitable interpolation method. The paper gives a method for cantilever allowable load design, which is proved reliable and effective by the calculation example.     

The effect of plastic constraint on the initiation of ductile tears in shipbuilding structural steels

In this paper, the effect of plastic constraint on the initiation of ductile tears in four different shipbuilding structural steels has been experimentally studied by measuring the J-integral and crack opening displacement COD at initiation in three-point bend specimens with deep and shallow notches. Experimental results of seven groups of different strength alloy steels show that both Si and Ji values of ductile tear from the shallow crack specimens which have less constraint flow field are significantly higher than those of deeply notched specimens. Slip-line-field analysis shows that, for shallow crack, the hydrostatic stress is lower than that from standard deeply cracked bend specimen, which develops a high level of crack tip constraint, provides a lower bound estimate of toughness, and will ensure an unduly conservative approach when applied to structural defects, especially if initiation values of COD and J-integral are used.     

Examining the theoretical–empirical inconsistency on stationarity of shipping freight rate

As market price, shipping freight rates should in theory be stationary, but most empirical tests have found them to be non-stationary. To examine the causes of this theoretical–empirical inconsistency, we investigate the sensitivities of the stationarity of shipping freight rates from two perspectives: sample length and sample window. Longer samples are found not sufficient to make them stationary. Instead, sample windows separated by structural breaks are tested as stationary. Moreover, freight rates are found to have entered into a new phase since the 2008 financial crisis. This study contributes to the literature on the stationarity of shipping freight rates by providing an explanation for the theoretical–empirical inconsistency.     

Research on low-frequency mechanical characteristics of the MR dampers in ship isolators

A new isolator composed of a steel rope spring and a magneto-rheological(MR) damper was designed and a study on low-frequency mechanical characteristics of MR dampers in isolators was carried out.It used the characteristics of the MR damper,such as fast response,controllable damping,small energy consumption,wide dynamic scope,and great adaptation.The relationships between MR damping forces and influencing factors were analyzed based on experimental data.The results show that damping force is not only related to structural dimensions,but also closely related to controllable current and vibration frequency.Finally,the empirical formula for damping forces was corrected,and the relationship between correction coefficients and factors analyzed.     

Scattering of Oblique Surface Waves by the Edge of Small Deformation on a Porous Ocean Bed

The scattering of oblique incident surface waves by the edge of a small cylindrical deformation on a porous bed in an ocean of finite depth, is investigated here within the framework of linearized water wave theory. Using perturbation analysis, the corresponding problem governed by modified Helmholtz equation is reduced to a boundary value problem for the first-order correction of the potential function. The first-order potential and, hence, the reflection and transmission coefficients are obtained by a method based on Green’s integral theorem with the introduction of appropriate Green’s function. Consideration of a patch of sinusoidal ripples shows that when the quotient of twice the component of the incident field wave number along x-direction and the ripple wave number approaches one, the theory predicts a resonant interaction between the bed and the free-surface, and the reflection coefficient becomes a multiple of the number of ripples. Again, for small angles of incidence, the reflected energy is more as compared to the other angles of incidence. It is also observed that the reflected energy is somewhat sensitive to the changes in the porosity of the ocean bed. From the derived results, the solutions for problems with impermeable ocean bed can be obtained as particular cases.     

Testing the Effects of Constraints on Climate Change–Friendly Behavior among Groups of Australian Residents

This study explores the relationship between Australian's attitudes toward climate change impacts on the Great Barrier Reef (GBR) and environmentally responsible behavior (ERB). We hypothesize that general attitudes toward climate change, subjective norms, and perceived behavioral control predict intended and reported behavior, and that attitude negatively influences constraints on adopting ERB. The moderating effect of residential condition (urban vs. rural contexts) was tested across these hypothesized relationships. We randomly selected 200 individuals from eight regions: Five within 50 km of the GBR Coastline and three from the Statistical Metropolitan Areas in Australia. We yielded 1,623 surveys by telephone interviews. Findings confirm our hypotheses and suggest the most important predictor of intentions is perceived behavioral control. The two groups of respondents (urban vs. rural) illustrate different relationships. This study offers insight on how managers of the GBR can effectively shape residents' behavioral tendencies that minimize human impacts on the natural environment.     

The impact of the Panama Canal expansion on Panama’s maritime cluster

The Panama Canal is currently in the process of a major expansion effort. After the new set of locks is opened in 2016, significantly larger ships can traverse the Canal. The current lock system has been in place for over 100 years, even though the size of ocean-going vessels has expanded considerably. One impact is on Panama’s maritime cluster. It is expected that the expansion will result in greater demand for many of the goods and services provided by the cluster. This article examines the economic impact of the Canal expansion on Panama’s maritime cluster. Clusters of economic activity can result in economies of agglomeration and supply chain network effects. Without these economies and network effects, clusters would not have a competitive advantage over businesses that are not in a cluster. It is expected that with a larger cluster, both agglomerative economies and network effects will increase. But, which cluster components will grow and which will not be affected to a great extent? To what extent will bottlenecks appear? These are some of the questions that this article addresses.     

Competition model of cruise home ports based on the cruise supply chain – based on China cruise market

This paper addresses issues of cruise home port competition based on the cruise supply chain. A pricing model of the cruise market is developed considering the competitive cooperation behaviors of the participants in the cruise supply chain. Furthermore, a model of cruise home port competition is developed to investigate the impacts of subsidy participants in the cruise supply chain on cruise home ports. The results indicate that subsidy policies change the market equilibrium, promote the upstream and downstream integration of cruise supply chain, and enhance cruise home port competitiveness. Subsidies to cruise line increase the payoffs of cruise supply chain and ports’ profit. Subsidies to travel agency decrease passenger costs and improve all ports’ profits. For the long-term development of cruise home port, the consequents can be used as policy suggestions.     

Numerical Investigations on the Aerodynamic Performance of Wind Turbine：Downwind Versus Upwind Configuration

Although the upwind configuration is more popular in the field of wind energy, the downwind one is a promising type for the offshore wind energy due to its special advantages. Different configurations ...     

A review of the effect of a/W ratio on fracture toughness (Ⅲ)——theoretical analysis

In partⅠandⅡof this series, experimental investigation in both EPFM and LEFM had been discussed. In this part, further theoretical analysis is given. The theoretical development of Two Parameter Fracture Mechanics by Hancock etc, has rationalized our experimental results. This method can be applied to engineering practice, and will allow the advantage of enhanced toughness for specimens with low levels of constraint to be taken into account for defect assessment.     

A review of the effect of a/ W ratio on fracture toughness （Ⅲ） ——theoretical analysis

In part I and II of this series, experimental investigation in both EPFM and LEFM had been discussed. In this part, further theoretical analysis is given. The theoretical development of Two Parameter Fracture Mechanics by Hancock etc, has rationalized our experimental results. This method can be applied to engineering practice, and will allow the advantage of enhanced toughness for specimens with low levels of constraint to be taken into account for defect assessment.     

Investigation on the Dynamic Responses of a Truss Spar Platform for Different Mooring Line Groups

The dynamic responses of any floating platform are dependent on the mass, stiffness and damping characteristics of the body as well as mooring system. Therefore, it is very essential to study the effect of individual contributions to the system that can finally help to economise their cost. This paper focuses on the effect of mooring stiffness on the responses of a truss spar platform, obtained by different grouping of lines. The study is part of our present researches on mooring systems which include the effect of line pretension, diameter and azimuth angles. The platform is modelled as a rigid body with three degrees-of-freedom and its motions are analyzed in time-domain using the implicit Newmark Beta technique. The mooring lines restoring force-excursion relationship is evaluated using a quasi-static approach. It is observed that the mooring system with lines arranged in less number of groups exhibits better performance in terms of the restoring forces as well as mean position of platform. However, the dynamic motions of platform remain unaffected for different line groups.