Hierarchal assessment of noise pollution in urban areas – A case study

Noise pollution in urban areas has many harmful effects on the citizens. There are varieties of noise generation sources of which the traffic noise could be a major source. The point which is perhaps less noticed is that sound level is not the only parameter to indicate the extent and intensity of noise pollution. Situation of urban land uses, distribution of population centers and types of passages can deeply affect the concern on this environmental issue but not with a similar ratio. This article presents an overlaying technique to define noise prone areas using all different factors involved. A case study was carried out in the District 14 of Tehran Metropolitan City where there are busy streets and highways. For this purpose, the share of each criterion in noise pollution intensity was determined using Analytical Hierarchy Process (AHP). Afterwards, the map layers were overlaid based upon the relative importance of the criteria to get the final map on which the noise prone areas are specified. The developed method could be used as a tool for indirect estimation of noise pollution by which instead of direct measurement of the equivalent sound level, it would be possible to predict noise susceptible areas considering the most important influential factors.     

Factors influencing the propensity to cycle to work

This paper describes the development of a mode choice model for the journey to work with special emphasis on the propensity to cycle. The model combines Revealed Preference (RP) and Stated Preference (SP) data to form a very large and comprehensive model. RP data from the National Travel Survey was combined with a specially commissioned RP survey. A number of SP surveys were also undertaken to examine the effects of different types of en-route and trip end cycle facilities and financial measures to encourage cycling.The development of the model is described in detail. The model was used to forecast trends in urban commuting shares over time and to predict the impacts of different measures to encourage cycling. Of the en-route cycle facilities, a completely segregated cycleway was forecast to have the greatest impact, but even the unfeasible scenario of universal provision of such facilities would only result in a 55% increase in cycling and a slight reduction in car commuting. Payments for cycling to work were found to be highly effective with a £2 daily payment almost doubling the level of cycling. The most effective policy would combine improvements in en-route facilities, a daily payment to cycle to work and comprehensive trip end facilities and this would also have a significant impact on car commuting.     

Traffic models for goods,service and business movements to manufacturing establishments

This paper is concerned with a problem area of increasing interest, namely the traffic characteristics of specific generators located on non‐residential land use. It concentrates on the problem of modelling traffic generation for goods, service and business movements at the manufacturing establishment. Firstly the contributions of earlier researchers are reviewed in the context of factors which have been considered important. Then a further study conducted by the author in Sheffield and in Manchester, England, is described. This study considers more rigorously than hitherto the questions of similarities in trip rates over different manufacturing activities and geographical areas, and of the choice of explanatory variables. Comparison of regressions is used to formalize indications of similarities in trip rates, and analysis of variance for choosing the most satisfactory explanatory variables. The study provides evidence of similarity in trip rates over seven different manufacturing activities and two geographical areas. It also shows distinctions between different non‐work traffic types in the extent of similarities in trip rates over different manufacturing activities and in explanatory variables for traffic generation relationships. Regarding the latter it is concluded that it is not possible to model accurately such traffic movements on the basis of explanatory variables which are normally available. Instead trip rates should be expressed in simple mathematical terms and should be based on large data populations. The study also makes contributions on peak flow factors for the actual design of facilities of manufacturing establishments. These findings and others are discussed in the context of the work of earlier researchers. Finally conclusions are drawn and guidance offered for future work into this problem.     

Using structural equations modeling to unravel the influence of land use patterns on travel behavior of workers in Montreal

This paper addresses the relations between travel behavior and land use patterns using a Structural Equations Modeling (SEM) framework. The proposed model structure draws on two earlier models developed for Lisbon and Seattle which show significant effects of land use patterns on travel behavior. The travel behavior variables included here are multifaceted including commuting distance, car ownership, the amount of mobility by mode (car, transit and non-motorized modes), both in terms of total kilometers travelled and number of trips. The model also includes a travel scheduling variable, which is the total time spent between the first and last trips to reflect daily constraints in time allocation and travel.The modeled land use variables measure the levels of urban concentration and density, diversity, both in terms of types of uses and the mix between jobs and inhabitants/residents, the transport supply levels, transit and road infrastructure, and accessibility indicators. The land use patterns are described both at the residence and employment zones of each individual included in the model by using a factor analysis technique as a data reduction and multicollinearity elimination technique. In order to explicitly account for self selection bias the land use variables are explicitly modeled as functions of socioeconomic attributes of individuals and their households.The results obtained show that people with different socioeconomic characteristics tend to work and live in places of substantially different urban environments. But besides these socioeconomic self-selection effects, land use variables significantly affect travel behavior. More precisely the effects of land use are in great part passed thru variables describing long term decisions like commuting distance, and car ownership. These results point to similar conclusions from the models developed for Lisbon and Seattle and thus give weight to the use of land use policies as tools for changing travel behavior.     

Enhanced transport-related air pollution prediction through a novel metamodel approach

This research proposes a novel approach to improve the ability to forecast low frequency extreme events of transport-related pollution in urban areas using a limited input data set. The approach is based on the idea of a self-managing model, able to adapt to unexpected changes in pollution level. In more detail, for a given combination of variables, it selects the most suitable prediction model within a set of alternative air quality models, estimated for a wider range of locations and conditions.In this study, the new approach is tested for the prediction of nitrogen dioxide concentration in the United Kingdom (UK), specifically in an air quality monitoring site of the Greater Manchester Area, by comparing it with a context-specific statistical model (ARIMAX). The analysis results show that the two methods are similar in terms of global covariance and difference between observed and simulated concentrations, however the performance of the new approach in the prediction of extreme air pollution events is up to 27% better than the standard statistical approach and up to 113% better than the artificial neural network method.     

Statistical and machine learning approach for planning dial-a-ride systems

Door-to-door transportation service for elderly and persons with disabilities is often called dial-a-ride (DAR), and is usually provided by transit agencies through private contractors. Growth in DAR ridership is reported across the United States and this tendency will likely continue due to aging population. Such trends encourage development of models that can provide decision support in planning new DAR systems or expanding existing ones. Several statistical models were previously developed to predict the required DAR system capacity, given various characteristics of the service region, level-of-service requirements and operator constraints. Our work contributes to this line of research by proposing statistical and machine learning approaches that provide more accurate predictions over a wider range of scenarios. This is accomplished through transformation of variables and application of generalized linear model and support vector regression. Proposed models are built into an online tool that can help transit planners and policy makers: (a) estimate the capacity and operating cost of a DAR system needed to provide the desired level of service, (b) explore tradeoffs between system costs and levels of service, and (c) compare the cost of providing DAR service with other transportation alternatives (e.g., taxi, conventional transit).     

Bikeshare trip generation in New York City

Cities around the world and in the US are implementing bikesharing systems, which allow users to access shared bicycles for short trips, typically in the urban core. Yet few scholars have examined the determinants of bikeshare station usage using a fine-grained approach. We estimate a series of Bayesian regression models of trip generation at stations, examining the effects bicycle infrastructure, population and employment, land use mix, and transit access separately by season of the year, weekday/weekend, and user type (subscriber versus casual). We find that bikeshare stations located near busy subway stations and bicycle infrastructure see greater utilization, and that greater population and employment generally predict greater usage. Our findings are nuanced, however; for instance, those areas with more residential population are associated with more trips by subscribers and on both weekdays and non-working days; however, the effect is much stronger on non-working days. Additional nuances can be found in how various land use variables affect bikeshare usage. We use our models, based on 2014 data, to forecast the trips generated at new stations opened in 2015. Results suggest there is large variation in predictive power, partly caused by variation in weather, but also by other factors that cannot be predicted. This leads us to the conclusion that the nuances we find in our inferential analysis are more useful for transportation planners.     

Direct and indirect influences on employed adults’ travel in the UK: New insights from the National Travel Survey data 2002–2010

Recent years saw a continuing shift in labour force composition, e.g. greater participation of women and a prominent rise in part-time workers. There are as yet relatively few recent studies that examine systematically the influences on the travel of employed adults from such perspectives, particularly regarding possible transport disadvantages of the fastest growing segments of workers. A robust analysis requires systematic data on a wide range of explanatory variables and multiple travel outcomes including accessibility, mobility and trip frequency for different trip purposes. The UK NTS data does meet the majority of this demanding data requirement, but its full use has so far been hampered by methodological difficulties. To overcome complex endogeneity problems, we develop novel, integrated structural equation models (SEMs) to uncover the influences of latent land use characteristics, indirect influences on car ownership, interactions among trip purposes as well as residents’ self-selection and spatial sorting. This general-purpose method provides a new, systematic decomposition of the influences on travel outcomes, where the effects of each variable can be examined in turn with robust error terms. The new insights underline two direct policy implications. First, it highlights the contributions of land use planning and urban design in restraining travel demand in the 2000s, and their increasing influence over the decade. Secondly, it shows that there may still be a large mobility disadvantage among the fastest growing segments of workers, particularly in dense urban areas. This research further investigates trend breaking influences before and after 2007 through grouped SEM models, as a test of the methodology for producing regular and timely updates regarding the main influences on personal travel from a system level.     

A utility-theory travel demand model incorporating travel budgets

A model of traveler behavior is proposed which is consistent with the possibility that travelers expend average daily amounts of time and money on travel with stable regularities both among urban areas and over time in the same area. The model is founded on economic utility theory. It is designed to forecast: (1) the amount of total travel generated by types of households, (2) the division of travel among available modes, and (3) the relationship between the amounts of time and money allocated to travel expenditures. The qualitative properties of the model are shown to be consistent with economic principles. Specific theoretical results reveal that, in the simultaneous presence of constraints on both time and money, travel budgets are not strictly constant proportions of income and time available as they are in the cases of single constraints relevant to classes of travelers to whom time is scarce compared to money, or conversely. Constant expenditure proportions are shown to be linear approximations which are subject to empirical validation. The relevant economic principle is that expenditures can be considered fixed in the short run but become flexible in the long run when utility maximization is applied to the expenditures themselves and not just to their allocation. Empirical tests of the model using data from three urban areas are positive, but additional tests are called for. The most important output of the research is deemed to be the establishment of theoretical hypotheses which can be used in continuing tests of travel budgets.     

Optimization of grid bus transit systems with elastic demand

Current analytic models for optimizing urban bus transit systems tend to sacrifice geographic realism and detail in order to obtain their solutions. The models presented here shows how an optimization approach can be successful without oversimplifying spatial characteristics and demand patterns of urban areas and how a grid bus transit system in a heterogeneous urban environment with elastic demand is optimized. The demand distribution over the service region is discrete, which can realistically represent geographic variation. Optimal network characteristics (route and station spacings), operating headways and fare are found, which maximize the total operator profit and social welfare. Irregular service regions, many‐to‐many demand patterns, and vehicle capacity constraints are considered in a sequential optimization process. The numerical results show that at the optima the operator profit and social welfare functions are rather flat with respect to route spacing and headway, thus facilitating the tailoring of design variables to the actual street network and particular operating schedule without a substantial decrease in profit. The sensitivities of the design variables to some important exogenous factors are also presented.     

Predictors of car use habit strength in an urban Norwegian public

Car use in urban areas carries well known risks for negative effects on urban quality of life, the environment and land use. Previous psychological work has mainly studied the habit of using a car as a predictor variable, whereas only a few studies have focused on psychological factors that may underlie and shape the habit. The aim of the present study is to examine demographic characteristics, spatial variables and social–psychological factors associated with car habit use strength. The results are based on a survey conducted in a random urban population-based sample with car access recruited from the Norwegian population registry (n = 878). Car use habit strength was stronger among male than female respondents and tended to be weak with a lower income. Multivariate logistic regression showed that reporting pro-environmental attitudes and personal norms predicted a weak car use habit strength, while reporting strong priority of flexibility and a long distance from home to work predicted a strong car use habit strength. Car use habit is influenced by multiple demographic, spatial and social–psychological factors, which should be carefully addressed in interventions aimed at reducing the likelihood of developing a strong car habit strength.     

Special issue: Importance of public transport

The transport demand in most major cities around the world can only be met with a high‐quality public transport system. The requirements on bus, rail, underground and tram systems are manifold with reliability and efficiency as the key factors. The service operating hours and the size of the network are often extended in order to serve the needs better. Further, most metropolitan areas are trying to provide more incentives for citizens to leave the car at home and use the local transit systems instead. The reasons are well known. Not only does a public transport system only make economical sense if it is well used, but most urban areas with a high car‐dependency face at least three major problems; safety, congestion, and pollution (noise and air pollution, land separation, etc.). It is generally recognised that to decrease car usage and to increase public transport usage a stick & carrot approach is needed. The London congestion‐charging scheme is an example since all revenues collected by the scheme are put into the improvement of bus and underground services.     

Optimization-based study of the location of park-and-ride facilities

Park-and-ride facilities are parking lots located on the periphery of cities to intercept car trips coming from the suburbs and diverting them to a transit system, thus playing a potentially important role in reducing traffic congestion and air pollution in urban areas. In this paper, we present a study carried out to shed light on where to install park-and-ride facilities in the city of Coimbra, central Portugal. Its main component is an optimization model which aims to determine the best possible locations for a given number of park-and-ride facilities under the objective of minimizing car use in the urban areas. The main result of the study is that the introduction of only three park-and-ride facilities could reduce car use in Coimbra's urban areas by 19%, an impact that would be very difficult to achieve through measures such as decreasing bus fares, increasing parking fees and/or increasing bus services.     

Comprehensive regional modeling for long-range planning: linking integrated urban models and geographic information systems

This study demonstrates the sequential linking of two types of models to permit the comprehensive evaluation of regional transportation and land use policies. First, we operate an integrated urban model (TRANUS), which represents both land and travel markets with zones and networks. The travel and land use projections from TRANUS are outlined, to demonstrate the general reasonableness of the results, as this is the first application of a market-based urban model in the US. Second, the land use projections for each of the 58 zones in the urban model were fed into a Geographic Information System (GIS)-based land allocation model, which spatially allocates the several land uses within each zone according to simple accessibility rules. While neither model is new, this is one of the first attempts to link these two types of models for regional policy assessments. Other integrated urban models may be linked to other GIS land allocation models in this fashion. Pairing these two types of models allows the user to gain the advantages of the urban models, which represent spatial competition across a region and produce measures of user welfare (traveler and locator surplus), and the advantages of the GIS land allocation models, which produce detailed land use maps that can then be used for environmental impact assessment.     

Do parking requirements significantly increase the area dedicated to parking? A test of the effect of parking requirements values in Los Angeles County

Minimum parking requirements (MPRs) are the norm for urban and suburban development in the United States (Davidson et al., 2002). The justification for MPRs is that overflow parking will occupy nearby street or off-street parking. Shoup (1999a) and Willson (1995) provide cases where there is reason to believe that parking space requirements have forced parcel developers to place more parking than they would in the absence of parking requirements. However, to our knowledge the existing literature does not test the effect of parking minimums on the amount of lot space devoted to parking beyond a few case studies. This paper tests the hypothesis that MPRs bind for most land uses using data on suburban office, commercial, industrial and retail property sales from Los Angeles County using both direct and indirect approaches. Our indirect test of the effects of parking requirements is similar to the one used by Glaeser and Gyourko (2003). A simple theoretical model shows that the marginal value of additional parking to the sale price of a building should be equal to the cost of land plus the cost of parking construction. We estimate the marginal values of parking and lot area with spatial methods using a large data set from the Los Angeles area non-residential property sales and find that for most of the property types the marginal value of parking is significantly below that of the parcel area. In addition, we directly examine required and supplied parking and find that on average parking supplied is quite close to the required amount.     

A zonal inference model based on observed smart-card transactions for Santiago de Chile

The collection of origin–destination data for a city is an important but often costly task. This way, there is a need to develop more efficient and inexpensive methods of collecting information about citizens’ travel patterns. In this line, this paper presents a generic methodology that allows to infer the origin and destination zones for an observed trip between two public transport stops (i.e., bus stops or metro stations) using socio-economic, land use, and network information. The proposed zonal inference model follows a disaggregated Logit approach including size variables. The model enables the estimation of a zonal origin–destination matrix for a city, if trip information passively collected by a smart-card payment system is available (in form of a stop-to-stop matrix). The methodology is applied to the Santiago de Chile’s morning peak period, with the purpose of serving as input for a public transport planning computational tool. To estimate the model, information was gathered from different sources and processed into a unified framework; data included a survey conducted at public transport stops, land use information, and a stop-to-stop trip matrix. Additionally, a zonal system with 1176 zones was constructed for the city, including the definition of its access links and associated distances. Our results shows that, ceteris paribus, zones with high numbers of housing units have higher probabilities of being the origin of a morning peak trip. Likewise, health facilities, educational, residential, commercial, and offices centres have significant attraction powers during this period. In this sense, our model manages to capture the expected effects of land use on trip generation and attraction. This study has numerous policy implications, as the information obtained can be used to predict the impacts of changes in the public transport network (such as extending routes, relocating their stops, designing new routes or changing the fare structure). Further research is needed to improve the zonal inference formulation and origin–destination matrix estimation, mainly by including better cost measures, and dealing with survey and data limitations.     

江苏省高速公路服务区绿色发展分析

结合江苏省独有的条件,文章分别从用地面积、建筑面积、绿化面积、停车位数量、用电、用水及其他节能辅助设施等方面入手,运用统计学、经济学和能源学等相关方法,对江苏省各地区服务区的资源利用现状进行了统计分析。并结合《江苏交通控股有限公司关于推进服务区高质量发展三年行动计划(2018-2020)》中关于服务区分类一览表的基础数据,分析服务区有何不足与缺陷,从问题出发提出相关措施,为以后服务区基础设施建设的研究奠定基础。     

Evaluation of pedestrian crosswalk level of service (LOS) in perspective of type of land-use

In India pedestrians usually cross the road at mid-block crosswalks due to ease of access to their destination or the development of adjacent land use types such as shopping, business areas, school and residential areas. The behaviour of pedestrian will change with respect to different land use type and this change in behaviour of pedestrian further reflects change in perceived level of service (LOS). So, it is important to evaluate the quality of service of such crossing facilities with respect to different land-use type under mixed traffic conditions. In this framework, pedestrian perceived LOS were collected with respect to different land-use type such as shopping, residential and business areas. The ordered probit (OP) model was developed by using NLOGIT software package, with number of vehicles encountered, road crossing difficulty as well as safety considered as primary factors along with pedestrian individual factors (gender and age), land-use type and roadway geometry. From the model results, it has been concluded that perceived safety, crossing difficulty, land-use condition, number of vehicles encountered, median width and number of lanes have significant effect on pedestrian perceived LOS at unprotected (un-signalized) mid-block crosswalks in mixed traffic scenario. The inferences of these results highlights the importance of land use planning in designing a new set of pedestrian access facilities for unprotected mid-block crosswalks under mixed traffic conditions. Also the study results would be useful for evaluating pedestrian accessibility taking into account different land-use type and planning required degree of segregation with vehicular movement at unprotected mid-block crosswalk locations.     

Assessing greenhouse gas and related air pollutant emissions from road traffic counts: A case study for Mauritius

The road transport sector is one of the major contributors of greenhouse gases and other air pollutants emissions. Regional emissions levels from road vehicles were investigated, in Mauritius, by applying a fuel-based approach. We estimated fuel consumption and air emissions based on traffic counts on the various types of classified roads at three different regional set ups, namely urban, semi urban and rural. The Relative Development Index (RDI), a composite index calculated from socio-economic and environmental indicators was used to classify regions. Our results show that the urban motorways were the most polluting due to heavy traffic. Some rural areas had important pollution levels as well. Our analysis of variance (ANOVA), however, showed little difference in emissions among road types and regions. The study can provide a simple tool for researchers in countries where data are very scarce, as is the case for many developing countries.