上海轨道交通清分系统架构中应用云计算技术的探讨

通过对上海轨道交通清分系统构架的现状分析,明确清分、线路中央计算机、车站计算机等系统之间业务功能的调整方向。根据云计算技术的特点,阐述在城市轨道交通自动售检票系统中如何建立私有云计算系统、不同服务层次服务的对象以及实施的技术路线,并提出城市轨道交通自动售检票系统云计算构架的设想与模型。     

A robust method for estimating transit passenger trajectories using automated data

Development of an origin-destination demand matrix is crucial for transit planning. The development process is facilitated by automated transit smart card data, making it possible to mine boarding and alighting patterns on an individual basis. This research proposes a novel trip chaining method which uses Automatic Fare Collection (AFC) and General Transit Feed Specification (GTFS) data to infer the most likely trajectory of individual transit passengers. The method relaxes the assumptions on various parameters used in the existing trip chaining algorithms such as transfer walking distance threshold, buffer distance for selecting the boarding location, time window for selecting the vehicle trip, etc. The method also resolves issues related to errors in GPS location recorded by AFC systems or selection of incorrect sub-route from GTFS data. The proposed trip chaining method generates a set of candidate trajectories for each AFC tag to reach the next tag, calculates the probability of each trajectory, and selects the most likely trajectory to infer the boarding and alighting stops. The method is applied to transit data from the Twin Cities, MN, which has an open transit system where passengers tap smart cards only once when boarding (or when alighting on pay-exit buses). Based on the consecutive tags of the passenger, the proposed algorithm is also modified for pay-exit cases. The method is compared to previous methods developed by the researchers and shows improvement in the number of inferred cases. Finally, results are visualized to understand the route ridership and geographical pattern of trips.     

Large-scale transit market segmentation with spatial-behavioural features

Transit market segmentation enables transit providers to comprehend the commonalities and heterogeneities among different groups of passengers, so that they can cater for individual transit riders’ mobility needs. The problem has recently been attracting a great interest with the proliferation of automated data collection systems such as Smart Card Automated Fare Collection (AFC), which allow researchers to observe individual travel behaviours over a long time period. However, there is a need for an integrated market segmentation method that incorporating both spatial and behavioural features of individual transit passengers. This algorithm also needs to be efficient for large-scale implementation. This paper proposes a new algorithm named Spatial Affinity Propagation (SAP) based on the classical Affinity Propagation algorithm (AP) to enable large-scale spatial transit market segmentation with spatial-behavioural features. SAP segments transit passengers using spatial geodetic coordinates, where passengers from the same segment are located within immediate walking distance; and using behavioural features mined from AFC data. The comparison with AP and popular algorithms in literature shows that SAP provides nearly as good clustering performance as AP while being 52% more efficient in computation time. This efficient framework would enable transit operators to leverage the availability of AFC data to understand the commonalities and heterogeneities among different groups of passengers.     

Understanding urban mobility patterns from a spatiotemporal perspective: daily ridership profiles of metro stations

Transportation - Smart card data derived from automatic fare collection (AFC) systems of public transit enable us to study resident movement from a macro perspective. The rhythms of traffic...     

Activity imputation for trip-chains elicited from smart-card data using a continuous hidden Markov model

Although smart-card data were expected to substitute for conventional travel surveys, the reality is that only a few automatic fare collection (AFC) systems can recognize an individual passenger's origin, transfer, and destination stops (or stations). The Seoul metropolitan area is equipped with a system wherein a passenger's entire trajectory can be tracked. Despite this great advantage, the use of smart-card data has a critical limitation wherein the purpose behind a trip is unknown. The present study proposed a rigorous methodology to impute the sequence of activities for each trip chain using a continuous hidden Markov model (CHMM), which belongs to the category of unsupervised machine-learning technologies. Coupled with the spatial and temporal information on trip chains from smart-card data, land-use characteristics were used to train a CHMM. Unlike supervised models that have been mobilized to impute the trip purpose to GPS data, A CHMM does not require an extra survey, such as the prompted-recall survey, in order to obtain labeled data for training. The estimated result of the proposed model yielded plausible activity patterns that are intuitively accountable and consistent with observed activity patterns.     

Calibrating a transit assignment model using smart card data in a large-scale multi-modal transit network

This paper describes a practical automated procedure to calibrate and validate a transit assignment model. An optimization method based on particle swarm algorithm is adopted to minimize a defined error term. This error term which is based on the percentage of root mean square error and the mean absolute percent error encompasses deviation of model outputs from observations considering both segment level as well as the mode level and can be applied to a large scale network. This study is based on the frequency-based assignment model using the concept of optimal strategy while any transit assignment model can be used in the proposed methodological framework. Lastly, the model is validated using another weekday data. The proposed methodology uses automatic fare collection (AFC) data to estimate the origin–destination matrix. This study combines data from three sources: the general transit feed specification, AFC, and a strategic transport model from a large-scale multimodal public transport network. The South-East Queensland (SEQ) network in Australia is used as a case study. The AFC system in SEQ has voluminous and high quality data on passenger boardings and alightings across bus, rail and ferry modes. The results indicate that the proposed procedure can successfully develop a multi-modal transit assignment model at a large scale. Higher dispersions are seen for the bus mode, in contrast to rail and ferry modes. Furthermore, a comparison is made between the strategies used by passengers and the generated strategies by the model between each origin and destination to get more insights about the detailed behaviour of the model. Overall, the analysis indicates that the AFC data is a valuable and rich source in calibrating and validating a transit assignment model.

     

Quantifying uncertainties in a national forecasting model

Uncertainties related to demand model system outputs is an important issue in travel demand models. This paper focuses on uncertainties arisen from the fact that models are estimated on a sample of the population (and not the whole population). Forecasting systems can be quite complex, and may contain procedures that not easily permit analytically derived statistical measures of uncertainty. In this paper, the possibilities to use computer-intensive numerical methods to compute statistical measures for very complex systems, without being bound to an analytical approach, are explored. Here, the bootstrap method is used to obtain statistical measures of outputs produced by the forecasting system SAMPERS. The SAMPERS system is used by Swedish transport authorities. The bootstrap method is briefly described as well as the procedure of applying bootstrap on the SAMPERS system. Numerical results are presented for selected forecast results at different levels such as total traffic demand, origin–destination demand, train line demand and the demand on specific links. Also, the uncertainty related to the value of time estimate is analysed.     

Impact of ITS measures on public transport: A Case study

Intelligent Transport Systems (ITS) have a wide range of applications. They range from the more traditional signal coordination system to concepts such as smart cars and smart roads. This paper describes transit‐based ITS measures in Singapore. The island‐state has plans to double the current 90 km rail network over the next ten years and has also implemented or committed to implement many ITS initiatives that impact upon the public transport systems. The aim of these investments is to achieve a high transit modal share using a comprehensive transit network. ITS measures that can promote this aim include: automatic vehicle location systems for buses and taxis, integrated transit fare systems using contactless smart cards, rail information systems, multi‐modal travel guides on Internet and electronic road pricing. The potential impacts of these measures are delay reduction, more comfort, productivity gain and better network accessibility. ITS measures do not necessarily add physical capacity to a public transport system but are excellent supporting measures to encourage the modal shift to transit, particularly if a quality transit system is already in place.     

Estimation of population origin–interchange–destination flows on multimodal transit networks

Previous research has combined automated fare-collection (AFC) and automated vehicle-location (AVL) data to infer the times and locations of passenger origins, interchanges (transfers), and destinations on multimodal transit networks. The resultant origin–interchange–destination flows (and the origin–destination (OD) matrices that comprise those flows), however, represent only a sample of total ridership, as they contain only those journeys made using the AFC payment method that have been successfully recorded or inferred. This paper presents a method for scaling passenger-journey flows (i.e., linked-trip flows) using additional information from passenger counts at each station gate and bus farebox, thereby estimating the flows of non-AFC passengers and of AFC passengers whose journeys were not successfully inferred.The proposed method is applied to a hypothetical test network and to AFC and AVL data from London’s multimodal public transit network. Because London requires AFC transactions upon both entry and exit for rail trips, a rail-only OD matrix is extracted from the estimated multimodal linked-trip flows, and is compared to a rail OD matrix generated using the iterative proportional fitting method.     

Speed management via in-car devices: effects,implications, perspectives

The objectives of this paper are to identify in-vehicle systems for speed management that have been or are being developed, and to suggest recommendations for the implementation of systems that will effectively influence driving speeds and thereby significantly increase safety. The best safety effect is expected from an "intelligent" gas pedal, more specifically the automatic speed limiter. However, in terms of user acceptance, this system is least liked, although, acceptance seems to improve after it has been tried out. Nonetheless, the final goal for implementation should be a mandatory speed limiter system, starting with voluntary usage supported with educational measures. A period of car producers' standardisation of ISA-systems should be followed by legislation prescribing that all new vehicles are to be fitted with the system. Finally, some questions regarding further research are outlined.     

Adaptive road border crossing system management: the role of priority programs

Land border crossings in North America, such as those between Canada and U.S.A., are expected to experience severe imbalance of travel demand and capacity of processors. During peak travel periods, this is already the case at high traffic locations. The land border crossing authorities have to address problems of congestion, national security and environmental impacts in the operation of the existing systems and to continue to address these problems as a part of infrastructure expansion plans. There is a need to adapt the crossing system management in order to accommodate efficiency and productivity‐oriented priority crossing measures. From a methodological perspective, it is a challenge to evaluate the role of priority crossing measures within the complex border crossing system. This paper reports research on modelling priority crossing initiatives. A microsimulation approach was used to model and analyse integrated processors of the Peace Bridge crossing system between Fort Erie (Ontario) and Buffalo (New York) under different scenarios of travel demand, customs processing times, priority crossing and queue jump lanes for automobile and truck traffic. Findings show the extent to which a border crossing system with priority crossing and queue jump lanes is more efficient and productive than one without these innovations. Copyright © 2011 John Wiley & Sons, Ltd.     

An integrated measure of accessibility and reliability of mass transit systems

The growth of a city or a metropolis requires well-functioning transit systems to accommodate the ensuing increase in travel demand. As a result, mass transit networks have to develop and expand from simple to complex topological systems over time to meet this demand. Such an evolution in the networks’ structure entails not only a change in network accessibility, but also a change in the level of network reliability on the part of stations and the entire system as well. Network accessibility and reliability are popular measures that have been widely applied to evaluate the resilience and vulnerability of a spatially networked system. However, the use of a single measure, either accessibility or reliability, provides different results, which demand an integrated measure to evaluate the network’s performance comprehensively. In this paper, we propose a set of integrated measures, named ACCREL (Integrated Accessibility and Reliability indicators) that considers both metrics in combination to evaluate a network’s performance and vulnerability. We apply the new measures for hypothetical mass transit system topologies, and a case study of the metro transit system in Seoul follows, highlighting the dynamics of network performance with four evolutionary stages. The main contribution of this study lies in the results from the experiments, which can be used to inform how transport network planning can be prepared to enhance the network functionality, thereby achieving a well-balanced, accessible, and reliable system. Insights on network vulnerability are also drawn for public transportation planners and spatial decision makers.     

System energy optimisation strategies for metros with regeneration

Energy and environmental sustainability in transportation are becoming ever more important. In Europe, the transportation sector is responsible for about 30% of the final end use of energy. Electrified railway systems play an important role in contributing to the reduction of energy usage and CO₂ emissions compared with other transport modes. For metro-transit systems with frequently motoring and braking trains, the effective use of regenerated braking energy is a significant way to reduce the net energy consumption. Although eco-driving strategies have been studied for some time, a comprehensive understanding of how regeneration affects the overall system energy consumption has not been developed. This paper proposes a multi-train traction power network modelling method to determine the system energy flow of the railway system with regenerating braking trains. The initial results show that minimising traction energy use is not the same as minimising the system energy usage in a metro system. An integrated optimisation method is proposed to solve the system energy-saving problem, which takes train movement and electrical power flow into consideration. The results of a study of the Beijing Yizhuang metro line indicate that optimised operation could reduce the energy consumption at the substations by nearly 38.6% compared to that used with the existing ATO operation.     

Slot misuse phenomena in capacity-constrained airports with seasonal demand: the Greek experience

Abstract

Airport slot misuse disturbs the efficient and continuous operation of capacity-constrained airports, leading to congestion and delay problems. Deviations from the coordinated schedule in regional airport systems that feature seasonal demand and delays in certain peak periods are studied in this article. The Greek airport system is considered as a case study. Deviations are quantified by computing the difference between scheduled and actual aircraft arrival times as well as the hourly slot capacity utilization ratio. Two collective indicators for airport benchmarking are proposed. An in-depth analysis of slot allocation deviations and the delays they cause is carried out for a representative sample of airports that are classified according to the proposed indicators. A brief discussion on potential measures to mitigate slot misuse is also presented.     

长输管道中泵的优化和节能技术

在长输管线中,泵站是输油系统中必不可少的部分,而且泵站的运行成本巨大。工况处于经常变化的输油系统是极为普遍的,在这些系统中,通常采用的节流调节法浪费能量。如果能很好地使用变频调速系统,能实现泵站的优化运行。文中介绍了泵机组变频节能工艺理论以及比例定律和相似抛物线的基本原理,并对调速后泵的转速和轴功率进行了计算,进行定速泵与变速泵串联运行试验,并比较了不同操作方式的能耗。     

The effect of slow zones on ridership: An analysis of the Chicago Transit Authority “El” Blue Line

Transit agencies frequently upgrade rail tracks to bring the system to a state of good repair (SGR) and to improve the speed and reliability of urban rail transit service. For safety during construction, agencies establish slow zones in which trains must reduce speed. Slow zones create delays and schedule disruptions that result in customer dissatisfaction and discontinued use of transit, either temporarily or permanently. While transit agencies are understandably concerned about the possible negative effects of slow zones, empirical research has not specifically examined the relationship between slow zones and ridership. This paper partially fills that gap. Using data collected from the Chicago Transit Authority (CTA) Customer Experience Survey, CTA Slow Zone Maps, and, the Automatic Fare Collection System (AFC), it examines whether recurring service delays due to slow zones affect transit rider behavior and if the transit loyalty programs, such as smart card systems, increase or decrease rider defections. Findings suggest that slow zones increase headway deviation which reduces ridership. Smart card customers are more sensitive to slow zones as they are more likely to stop using transit as a result of delay. The findings of this paper have two major policy implications for transit agencies: (1) loyalty card users, often the most reliable source of revenue, are most at risk for defection during construction and (2) it is critical to minimize construction disruptions and delays in the long run by maintaining state of good repair. The results of this paper can likely be used as the basis for supporting immediate funding requests to bring the system to an acceptable state of good repair as well as stimulating ideas about funding reform for transit.     

Thermal deformations in typical maglev guideway structures

Thermal gradients and related deformations induced in elevated Maglev guideways by temperature variations in their environment have been predicted by a mathematical model. The deflections induced by thermal gradients in typical guideways are found to exceed specified limits for acceptable operation of an electromagnetic suspension system vehicle unless measures are taken to reduce the thermal gradients and related deflections by suitable treatment of the guideway surfaces.     

The effects of AVL accuracy upon public service bus system performance

Through an examination of the dependence of several key performance parameters of a public bus system upon Automatic Vehicle Location (AVL) estimation accuracy, it becomes possible to place in perspective the value of AVL technology to improved public conveyance performance. Important bus transportation system performance measures dependent upon AVL estimation accuracy are: (1) Headway Control Error; (2) Time-Of-Passage Error, and (3) Required Layover Reserve. An analytical model of the dependence of these bus system performance measures upon AVL estimation error has been constructed. In addition, error models of three basic types of AVL systems, i.e., dead reckoning, proximity, and radio location have been developed and validated by experimental comparisons. By employing both sets of models, i.e. for the bus transport and AVL systems it becomes possible to recommend appropriate AVL technologies that best meet the performance requirements of a public bus service. The accompanying text synopsizes the noted models and provides an example of their use.     

Integrating mobile agent technology with multi-agent systems for distributed traffic detection and management systems

Agent technology is rapidly emerging as a powerful computing paradigm to cope with the complexity in dynamic distributed systems, such as traffic control and management systems. However, while a number of agent-based traffic control and management systems have been proposed and the multi-agent systems have been studied, to the best of our knowledge, the mobile agent technology has not been applied to this field. In this paper, we propose to integrate mobile agent technology with multi-agent systems to enhance the ability of the traffic management systems to deal with the uncertainty in a dynamic environment. In particular, we have developed an IEEE FIPA compliant mobile agent system called Mobile-C and designed an agent-based real-time traffic detection and management system (ABRTTDMS). The system based on Mobile-C takes advantages of both stationary agents and mobile agents. The use of mobile agents allows ABRTTDMS dynamically deploying new control algorithms and operations to respond unforeseen events and conditions. Mobility also reduces incident response time and data transmission over the network. The simulation of using mobile agents for dynamic algorithm and operation deployment demonstrates that mobile agent approach offers great flexibility in managing dynamics in complex systems.