Novel coordinated algorithm for Traction Control System on split friction and slope road

A Traction Control System (TCS) is used to avoid excessive wheel-slip via adjusting active brake pressure and engine torque when vehicle starts fiercely. The split friction and slope of the road are complicated conditions for TCS. Once operated under these conditions, the traction control performance of the vehicle might be deteriorated and the vehicle might lack drive capability or lose lateral stability, if the regulated active brake pressure and engine torque can’t match up promptly and effectively. In order to solve this problem, a novel coordinated algorithm for TCS is brought forward. Firstly, two brake controllers, including a basic controller based on the friction difference between the two drive wheels for compensating this difference and a fuzzy logic controller for assisting the engine torque controller to adjust wheel-slip, are presented for brake control together. And then two engine torque controllers, containing a basic PID controller for wheel-slip control and a fuzzy logic controller for compensating torque needed by the road slope, are built for engine torque control together. Due to the simultaneous and accurate coordination of the two regulated variables the controlled vehicle can start smoothly. The vehicle test and simulation results on various road conditions have testified that the proposed method is effective and robust.     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

Fuzzy-logic applied to yaw moment control for vehicle stability

In this paper, we propose a new yaw moment control based on fuzzy logic to improve vehicle handling and stability. The advantages of fuzzy methods are their simplicity and their good performance in controlling non-linear systems. The developed controller generates the suitable yaw moment which is obtained from the difference of the brake forces between the front wheels so that the vehicle follows the target values of the yaw rate and the sideslip angle. The simulation results show the effectiveness of the proposed control method when the vehicle is subjected to different cornering steering manoeuvres such as change line and J-turn under different driving conditions (dry road and snow-covered).     

Fuzzy-logic applied to yaw moment control for vehicle stability

In this paper, we propose a new yaw moment control based on fuzzy logic to improve vehicle handling and stability. The advantages of fuzzy methods are their simplicity and their good performance in controlling non-linear systems. The developed controller generates the suitable yaw moment which is obtained from the difference of the brake forces between the front wheels so that the vehicle follows the target values of the yaw rate and the sideslip angle. The simulation results show the effectiveness of the proposed control method when the vehicle is subjected to different cornering steering manoeuvres such as change line and J-turn under different driving conditions (dry road and snow-covered).     

Fuzzy Logic Traction Controllers and their Effect on Longitudinal Vehicle Platoon Systems

This paper presents two fuzzy logic traction controllers and investigates their effect on longitudinal platoon systems. A fuzzy logic approach is appealing for traction control because of the nonlinearity and time-varying uncertainty involved in traction control systems

The fuzzy logic traction controllers we present regulate brake torque to control wheel slip, which is the normalized difference between wheel and vehicle speed. One fuzzy controller estimates the peak slip corresponding to the maximum tire-road adhesion coefficient and regulates wheel slip at the peak slip. The controller is attractive because of its ability to maximize acceleration and deceleration regardless of road condition. However, we find through simulations the controller's performance degrades in the presence of time-varying uncertainties. The other fuzzy logic controller regulates wheel slip at any desired value. Through simulations we find the controller robust against changing road conditions and uncertainties. The target slip is predetermined and not necessarily the peak slip for all road conditions. If the target slip is set low, stable acceleration and deceleration is guaranteed, regardless of road condition

We also study the effect of traction control on longitudinal vehicle platoon systems using simulations. The simulations include acceleration and deceleration maneuvers on an icy road. The results indicate traction control may substantially improve longitudinal platoon performance, especially when icy road conditions exist.     

基于小波控制的电动汽车稳定性研究（双语出版）

针对前轮独立驱动电动汽车,研究一种基于小波控制器的驱动稳定性控制系统。为提高车辆对开路面的行驶稳定性,根据驱动轮等转矩分配控制策略,提出基于神经网络PID的驱动轮滑移率相近为目标控制策略。针对矢量控制中的电流控制,提出基于离散小波变换的电流控制器。通过CarSim/Simulink建立前轮独立驱动电动汽车联合仿真平台,进行不同工况整车性能仿真与分析,并基于A&D5435快速原型开发平台进行实车试验。仿真与试验结果表明：基于小波控制器的驱动控制系统不仅提高了车辆对开路面行驶的稳定性,而且具有更平滑、更快速的转矩响应;对开路面工况下,提出的控制策略左侧、右侧驱动轮速度仿真结果与试验结果最大偏差分别为3.43%和3.56%;等转矩分配控制策略下,左侧、右侧驱动轮速度仿真结果与试验结果最大偏差分别为3.86%和3.25%,表明了试验与仿真的一致性;对开路面仿真工况下,相比于驱动轮等转矩分配控制策略,基于神经网络PID的驱动轮滑移率相近为目标控制策略的车辆峰值质心侧偏角降低了79.57%,侧向跑偏距离降低了73.39%。     

Integrated control of brake pressure and rear-wheel steering to improve lateral stability with fuzzy logic

This study introduces an integrated dynamic control with steering (IDCS) system to improve vehicle handling and stability under severe driving conditions. It integrates an active rear-wheel steering control system and a direct yawmoment control system with fuzzy logic. Direct yaw-moment control is achieved by modifying the optimal slip of the front outer wheel. An 8-degree-of-freedom vehicle model was used to evaluate the proposed IDCS for various road conditions and driving inputs. The results show that the yaw rate tracked the reference yaw rate and that the body slip angle was reduced when the IDCS was employed, thereby increasing the controllability and stability of the vehicle on slippery roads. The IDCS system reduced the deviation from the center line for a vehicle running on a split m road.     

Design of Regenerative Anti-Lock Braking System Controller for 4 In-Wheel-Motor Drive Electric Vehicle with Road Surface Estimation

This paper presents a regenerative anti-lock braking system control method with road detection capability. The aim of the proposed methodology is to improve electric vehicle safety and energy economy during braking maneuvers. Vehicle body longitudinal deceleration is used to estimate a road surface. Based on the estimation results, the controller generates an appropriate braking torque to keep an optimal for various road surfaces wheel slip and to regenerate for a given motor the maximum possible amount of energy during vehicle deceleration. A fuzzy logic controller is applied to fulfill the task. The control method is tested on a four in-wheel-motor drive sport utility electric vehicle model. The model is constructed and parametrized according to the specifications provided by the vehicle manufacturer. The simulation results conducted on different road surfaces, including dry, wet and icy, are introduced.     

Vehicle velocity estimation using effective inertia for an in-wheel electric vehicle

In this study, a vehicle velocity estimation algorithm for an in-wheel electric vehicle is proposed. This algorithm estimates the vehicle velocity using the concept of effective inertia, which is based on the motor torque, the angular velocity of each wheel and vehicle acceleration. Effective inertia is a virtual mass that changes according to the state of a vehicle, such as acceleration, deceleration, turning or driving on a low friction road. The performance of the proposed vehicle velocity estimation algorithm was verified in various conditions that included straight driving, circle driving and low friction road driving using the in-wheel electric vehicle that was equipped with an in-wheel system in each of its rear wheels.     

An optimal torque distribution control strategy for four-independent wheel drive electric vehicles

In this paper, an optimal torque distribution approach is proposed for electric vehicle equipped with four independent wheel motors to improve vehicle handling and stability performance. A novel objective function is formulated which works in a multifunctional way by considering the interference among different performance indices: forces and moment errors at the centre of gravity of the vehicle, actuator control efforts and tyre workload usage. To adapt different driving conditions, a weighting factors tuning scheme is designed to adjust the relative weight of each performance in the objective function. The effectiveness of the proposed optimal torque distribution is evaluated by simulations with CarSim and Matlab/Simulink. The simulation results under different driving scenarios indicate that the proposed control strategy can effectively improve the vehicle handling and stability even in slippery road conditions.     

Coordinated vehicle traction control based on engine torque and brake pressure under complicated road conditions

Vehicle traction control system has been developed to enhance the traction capability and the direction stability of the driving wheels through the tyre slip ratio regulation. Under normal situations, if the tyre slip ratio exceeds a certain threshold, the slip ratio of the driving wheel is regulated by the coupled interaction of the engine torque and the active brake pressure. In order to obtain the best driving performance on a road under complicated friction conditions, the driving torque and the active brake pressure, need to be decoupled and adjusted to avoid penalisation of each other. In this paper, a coordinated cascade control method with two sliding-mode variable structure controllers is presented. In this control method, the driving wheel slip ratio is regulated by adjusting the engine torque and the wheel brake pressure. Through the sliding-mode controller, the engine torque is tuned to achieve the maximum driving acceleration and then the active brake pressure is applied to the slipped wheel for further modification of the wheel slip ratio. The advantage of this control method is that through proper regulation, the conflict between the two control inputs could be avoided. Finally, the simulation results validate the effectiveness of the proposed method.     

Development of control logic for hydraulic active roll control system

Developed in this research is a control logic for the ARC (Active Roll Control) system that uses rotary-type hydraulic stabilizer actuators at the front and rear axles. The hydraulic components of the system were modeled in detail using AMESim, and a driving logic for the hydraulic circuit was constructed based upon the model. The performance of the driving logic was evaluated on a test bench, and it demonstrated good pressure tracking capability. The control logic was then designed with the target of reducing the roll motion of the vehicle during cornering. The control logic consists of two parts: a feedforward controller that generates anti-roll moments in response to the centrifugal force, and a feedback controller that generates anti-roll moments in order to make the roll angle to follow its target value. The developed ARC logic was evaluated on a test vehicle under various driving conditions including a slowly accelerated circular motion and a sinusoidal steering. Through the test, the ARC system demonstrated successful reduction of the roll motion under all conditions, and any discomfort due to the control delay was not observed even at a fast steering maneuver.     

Improved optimal controller for start-up of amt trucks in consideration of driver’s intention

A linear-quadratic optimal controller is proposed for vehicle start-up, which is designed as a linear feedback form of the states and the measured (estimated) disturbances. The requirements of less friction loss and less driveline shock are represented by the weighting matrices of the cost function. The driver’s intension is also considered and the controller gains are adjusted on-line accordingly. The designed control strategy is tested on a complete powertrain simulation model. Through large amount of simulations, it is verified that the system is robust to the variations of driving conditions, such as variation of vehicle mass and road grade. It is also shown that the control performance is influenced greatly by the estimation error of engine torque and clutch torque, and the acceptable level of mean estimation error is about ±10%.     

智能分布式驱动汽车路径跟踪/制动能量回收协同控制策略研究

为了解决智能分布式驱动汽车路径跟踪与制动能量回收系统间的协同控制难题,充分考虑分布式驱动汽车四轮扭矩独立可控在智能驾驶系统中的优势,设计适应不同路面附着条件的智能分布式驱动汽车转向、制动分层协同控制策略。上层控制器依据不同的路面类型设计差异化的多目标代价函数,以综合优化各工况下的控制目标。高附路面下,制定满足最大能量回收值的全局参考车速,在线优化路径跟踪指令,实现最优能量回收的同时减小系统运算负荷;低附路面下,优先考虑车辆的路径跟踪性能和行驶稳定性,在多目标代价函数中取消对全局参考车速的跟随要求,增设终端速度约束与能量回收项性能指标并减小能量回收项性能指标的权重系数。上层控制器基于模型预测控制方法对多目标代价函数进行滚动优化与预测求解,得到期望的前轮转角及4个车轮的总制动扭矩需求。下层控制器根据制动扭矩需求对四轮的液压制动扭矩和电机制动扭矩进行分配,最终完成整个复合制动过程。基于MATLAB/Simulink和CarSim软件,搭建控制器在环仿真平台,并在高附和低附路面条件下对所提出的策略进行试验验证。研究结果表明：高附路面下,所提出的控制策略在准确跟踪期望路径的同时相较固定比例制动力分配方法可提升2.7%的能量回收值并减少约0.02 s的单次计算时间;低附路面下,与使用高附控制策略相比,能够保证车辆的路径跟踪准确性与行驶稳定性,同时可提升7.8%的能量回收值;控制器在环试验结果证明了该协同控制策略对车辆性能提升的有效性。     

基于变权重系数的分布式驱动无人车轨迹跟踪

为了提高分布式无人车轨迹跟踪的精度，提出了基于自主与差动协调转向控制的轨迹跟踪方法。首先，在车辆三自由度模型基础上，基于模型预测控制（MPC）实时计算前轮转角以控制车辆进行自主转向轨迹跟踪。在此过程中，为了提高自主转向下车辆的轨迹跟踪精度与行驶的稳定性，考虑多种因素，利用经验公式及神经网络控制对MPC的预瞄步数和预瞄步长进行多参数调整，实现预瞄时间的自适应控制。其次，在恒转矩需求的情况下，以轨迹偏差为PID控制器的输入及左右轮毂电机转矩为输出进行差动转向控制，实现了差动转向下的轨迹跟踪控制。然后，通过设置权重系数的方法将自主与差动转向相结合。考虑到车辆横纵向动力学因素，采用模糊控制及经验公式对权重系数进行了调整，从而在提高车辆转向灵活性与轨迹跟踪效果的同时保证车辆行驶的稳定性。CarSim与Simulink联合仿真以及实车试验结果表明：与自主转向轨迹跟踪相比，采用变权重系数的协调控制可以在不同的工况下提高车辆的转向灵活性与轨迹跟踪的精度，轨迹跟踪偏差的均方根值改善率达到了11%。所提出的协调转向控制方法可为分布式驱动车辆转向灵活性的提高及轨迹跟踪精度的改善提供一种新的思路。     

基于模糊逻辑控制策略的混合动力汽车仿真研究

以燃油经济性和排放性能为主要控制目标,提出一种基于模糊逻辑的能量分配控制策略,应用ADVISOR仿真软件,对制定的控制策略在不同的道路循环工况下进行仿真。仿真结果表明,所设计的模糊逻辑控制策略能够合理分配发动机和电机的转矩,可使发动机工作在效率较高、排放较低的中等负荷区,整车的燃油经济性较好、排放较低。     

Dynamics characteristics analysis and control of FWID EV

Compared with internal combustion engine (ICE) vehicles, four-wheel-independently-drive electric vehicles (FWID EV) have significant advantages, such as more controlled degree of freedom (DOF), higher energy efficiency and faster torque response of an electric motor. The influence of these advantages and other characteristics on vehicle dynamics control need to be evaluated in detail. This paper firstly analyzed the dynamics characteristics of FWID EV, including the feasible region of vehicle global force, the improvement of powertrain energy efficiency and the time-delays of electric motor torque in the direct yaw moment feedback control system. In this way, the influence of electric motor output power limit, road friction coefficient and the wheel torque response on the stability control, as well as the impact of motor idle loss on the torque distribution method were illustrated clearly. Then a vehicle dynamics control method based on the vehicle stability state was proposed. In normal driving condition, the powertrain energy efficiency can be improved by torque distribution between front and rear wheels. In extreme driving condition, the electric motors combined with the electro-hydraulic braking system were employed as actuators for direct yaw moment control. Simulation results show that dynamics control which take full advantages of the more controlled freedom and the motor torque response characteristics improve the vehicle stability better than the control based on the hydraulic braking system of conventional vehicle. Furthermore, some road tests in a real vehicle were conducted to evaluate the performance of proposed control method.     

Slip regulation for anti-lock braking systems using multiple surface sliding controller combined with inertial delay control

In this paper, a multiple surface sliding controller is designed for an anti-lock braking system to maintain the slip ratio at a desired level. Various types of uncertainties coming from unknown road surface conditions, the variations in normal force and the mass of the vehicle are estimated using an uncertainty estimation technique called the inertial delay control and then the estimate is used in the design of the multiple surface sliding controller. The proposed scheme does not require the bounds of uncertainties. The ultimate boundedness of the overall system is proved. The proposed scheme is validated by simulation under various scenarios of road friction, road gradient and vehicle loading followed by experimentation on a laboratory anti-lock braking set-up for different friction conditions.     

Integrated chassis control for a three-axle electric bus with distributed driving motors and active rear steering system

This paper describes an integrated chassis control framework for a novel three-axle electric bus with active rear steering (ARS) axle and four motors at the middle and rear wheels. The proposed integrated framework consists of four parts: (1) an active speed limiting controller is designed for anti-body slip control and rollover prevention; (2) an ARS controller is designed for coordinating the tyre wear between the driving wheels; (3) an inter-axle torque distribution controller is designed for optimal torque distribution between the axles, considering anti-wheel slip and battery power limitations and (4) a data acquisition and estimation module for collecting the measured and estimated vehicle states. To verify the performances, a simulation platform is established in Trucksim software combined with Simulink. Three test cases are particularly designed to show the performances. The proposed algorithm is compared with a simple even control algorithm. The test results show satisfactory lateral stability and rollover prevention performances under severe steering conditions. The desired tyre wear coordinating performance is also realised, and the wheel slip ratios are restricted within stable region during intensive driving and emergency braking with complicated road conditions.     

工程车辆液压行走驱动系统模糊自适应PID控制策略研究

在现有工程机械PID控制器的基础上,利用模糊推理实现了对PID参数在线自整定模糊自适应控制,并且在MATLAB软件下将该控制器在车辆液压底盘试验台系统中的应用进行了研究,仿真结果表明,参数自适应模糊PID控制能使系统达到满意的控制效果.