共查询到20条相似文献,搜索用时 187 毫秒
1.
2.
采用滑移网格技术,使用基于求解RANS方程的CFD软件数值模拟均匀流场中的螺旋桨非定常水动力性能.为了真正实现螺旋桨的旋转运动,在计算过程中采用定长多运动参考系模型计算出初始流场,再用滑移网格模型完成整个计算.数值计算得到的推力系数和转矩系数与实验结果吻合良好,验证了该方法应用于螺旋桨水动力性能研究的可行性. 相似文献
3.
4.
[目的]为改进船舶推进性能,提高船舶效能,克服螺旋桨参数众多、建模繁琐、水动力数值计算收敛速度慢、伴流场的湍流效应等问题,提出一套螺旋桨高效优化方法。[方法]首先,将基于非均匀有理B样条的自由曲面变形(NFFD)技术构建的参数化螺旋桨作为输出,利用CFD数值仿真对螺旋桨性能特征进行预报。然后,基于仿真数据建立螺旋桨性能高斯近似预测模型,建立以提高效率、降低扭矩系数为目标的优化模型,利用二代非支配排序遗传算法(NSGA-Ⅱ)得到最优解。[结果]结果显示,在均匀流场和船后伴流场下,螺旋桨的优化结果有着相似规律,即桨叶宽度和厚度均呈减小的趋势,倾斜角呈增大趋势,但由于在船后伴流场下流速会降低,因而桨叶宽度和厚度的减小以及倾斜角的增加幅度相对于均匀流场下的小。[结论]采用所构建的方法可以实现均匀流场和船后伴流场下螺旋桨的高效优化设计。 相似文献
5.
为了系统地研究非均匀流场中螺旋桨流噪声的特点,采用CFD与声学无限元方法结合的方式,对螺旋桨的频域噪声进行数值预报。通过采用大涡模拟方法对非均匀流场中的螺旋桨水动力性能进行计算,然后运用ACTRAN软件的声学无限元方法,对螺旋桨的无空泡噪声进行数值模拟,并对特征点进行频域分析。流场计算结果显示:非定常计算得到的螺旋桨水动力系数与试验值吻合良好,LES模拟得到的流场初值是可信的;通过分析噪声分布云图及特征点频谱曲线得出:非均匀流场中螺旋桨的辐射噪声主要集中在低频段,且该频段的噪声主要由偶极子组成,同时噪声衰减速度随频率增大而减小,螺旋桨轴向声压级高于径向两侧,验证了计算结果的可靠性,为螺旋桨的水下噪声预报提供了一种新的方法。 相似文献
6.
为了研究特种推进器导管桨在非定常下的水动力性能,本文提出一种基于重叠网格的方法,实现了导管桨旋转过程中的非定常水动力性能仿真高精度模拟。本文通过求解RANS方程,采用湍流模型Realizableκ-ε,借助新款计算流体软件STARCCM+,应用重叠网格技术和MRF模型分别计算了导管桨在非定常与定常时的水动力性能,分析了压力流场细节,并与已有试验值进行对比,验证了采用重叠网格技术和STAR CCM+流体软件应用于导管桨非定常和定常水动力性能计算的可靠性。研究结果表明,应用重叠网格技术获得的非定常水动力性能的计算精度更高,尤其是在螺旋桨的推力和扭矩方面。 相似文献
7.
《舰船科学技术》2021,43(7)
为了研究特种推进器导管桨在非定常下的水动力性能,本文提出一种基于重叠网格的方法,实现了导管桨旋转过程中的非定常水动力性能仿真高精度模拟。本文通过求解RANS方程,采用湍流模型Realizableκ-ε,借助新款计算流体软件STAR CCM+,应用重叠网格技术和MRF模型分别计算了导管桨在非定常与定常时的水动力性能,分析了压力流场细节,并与已有试验值进行对比,验证了采用重叠网格技术和STAR CCM+流体软件应用于导管桨非定常和定常水动力性能计算的可靠性。研究结果表明,应用重叠网格技术获得的非定常水动力性能的计算精度更高,尤其是在螺旋桨的推力和扭矩方面。 相似文献
8.
基于多块混合网格方法预报螺旋桨非正常工作状态时的水动力性能 总被引:1,自引:0,他引:1
运用多块混合网格,结合RNG κ-ε湍流模型对非正常工作状态下的螺旋桨水动力性能进行了计算研究.模拟了某型螺旋桨在锁死情况下,螺旋桨表面受力随进速的改变而相应的变化规律;同时,把滑移网格技术和动网格技术运用于模拟自由旋转螺旋桨的水动力性能计算中,获取不同进速下螺旋桨的临界转速和表面受力情况.在文中把采用CFD方法计算的结果与采用经验公式计算的结果进行了对比分析.从对比结果可知,采用CFD方法可近似地获得非正常工作状态下的螺旋桨水动力性能参数,而且可以较真实地模拟流场特性,获取流场信息,相对于经验公式的计算方法存在自己的优势. 相似文献
9.
10.
运用多块混合网格,结合RNG k-ε湍流模型对非正常工作状态下的螺旋桨水动力性能进行了计算研究。模拟了某型螺旋桨在锁死情况下,螺旋桨表面受力随进速的改变而相应的变化规律;同时,把滑移网格技术和动网格技术运用于模拟自由旋转螺旋桨的水动力性能计算中,获取不同进速下螺旋桨的临界转速和表面受力情况。在文中把采用CFD方法计算的结果与采用经验公式计算的结果进行了对比分析。从对比结果可知,采用CFD方法可近似地获得非正常工作状态下的螺旋桨水动力性能参数,而且可以较真实地模拟流场特性,获取流场信息,相对于经验公式的计算方法存在自己的优势。 相似文献
11.
12.
13.
14.
15.
采用有限体积法计算螺旋桨与船尾的干扰流场,船尾流场采用欧拉方程进行求解,通过与螺旋桨性能计算程序相互迭代确定其实效伴流场。对桨盘处轴向伴流的计算表明,计算结果是合理的。 相似文献
16.
船模伴流场修正对螺旋桨激振力预报的影响 总被引:2,自引:1,他引:1
介绍Hoekstra船模伴流修正方法、伴流模拟方法及螺旋桨激振力测量的试验过程。以第16届ITTC推荐的Sydney Express桨为研究对象,在上海船舶运输科学研究所空泡实验室用网格方法模拟船舶艉部流场,通过布置在桨模上方相应位置平板上的5个传感器进行了脉动压力测量。比较螺旋桨在船模伴流场和使用Hoekstra法换算得到的实船伴流场中工作时激振力的预报值及桨模空泡形态,并与实桨对比,就伴流场修正对螺旋桨激振力预报的影响作了探讨。 相似文献
17.
《船舶与海洋工程学报》2017,(3)
The speed of a ship sailing in waves always slows down due to the decrease in efficiency of the propeller. So it is necessary and essential to analyze the unsteady hydrodynamic performance of propeller in waves. This paper is based on the numerical simulation and experimental research of hydrodynamics performance when the propeller is under wave conditions. Open-water propeller performance in calm water is calculated by commercial codes and the results are compared to experimental values to evaluate the accuracy of the numerical simulation method. The first-order Volume of Fluid(VOF) wave method in STAR CCM+ is utilized to simulate the three-dimensional numerical wave. According to the above prerequisite, the numerical calculation of hydrodynamic performance of the propeller under wave conditions is conducted, and the results reveal that both thrust and torque of the propeller under wave conditions reveal intense unsteady behavior. With the periodic variation of waves, ventilation, and even an effluent phenomenon appears on the propeller. Calculation results indicate, when ventilation or effluent appears, the numerical calculation model can capture the dynamic characteristics of the propeller accurately, thus providing a significant theory foundation forfurther studying the hydrodynamic performance of a propeller in waves. 相似文献
18.
Computational predictions of ship-speed performance 总被引:1,自引:0,他引:1
Jung-Eun Choi Jung-Hun Kim Hong-Gi Lee Bong-Jun Choi Dong-Hyun Lee 《Journal of Marine Science and Technology》2009,14(3):322-333
This paper examines ship-speed performance based on acomputational method. The computations are carried out under identical
model conditions, i.e., resistance and self-propulsion tests, to predict the speed-power relationship. The self-propulsion
point is obtained from the self-propulsive computational results of two propeller rotative speeds. The speed-power relationship
in full scale is obtained through analyzing the computational results in model scale according to the model-ship performance
analysis method of ITTC’78. The object ship is a VLCC. The limiting streamlines and the distribution of the pressure coefficient
on the hull, the wake characteristics on the propeller plane, and the wave characteristics around a model ship are also investigated.
After completing the computations, a series of model tests are conducted to evaluate the accuracy of the predictions by comparing
the computational results with the experimental results. 相似文献
19.
20.
This paper evaluates various computational methods used to compute propeller performance, hydrodynamic side force and bending moment applied to an azimuth propulsor propeller shaft in oblique inflow. The two non-viscous models used are the BEM method and the blade element momentum theory (BEMT). RANS calculations are used to compute the loads on the propeller and the nominal wake velocity from the thruster body to be used in the BEMT model. The effect of the ship hull is also considered in the calculation by implementing the measured nominal wake of a ship hull at different propeller azimuthal positions. All the models are compared and validated against the experimental results, and the discussions are presented. 相似文献