共查询到20条相似文献,搜索用时 378 毫秒
1.
分析基于PDA的嵌入式GIS系统结构,围绕高速公路养护数据PDA录入系统的研究与开发,着重阐述利用PDA录入高速公路养护数据,并实现将PDA数据与桌面数据库同步,最终实现一次性录入养护数据目的的关键技术及实现方法。 相似文献
2.
3.
《数据库原理》课程教学过程中的现状与存在的理论与实际脱节,尤其教材中关于数据库设计规范化理论和实例与软件开发中实际数据库设计相差巨大,通过总结多年的教学经验和多年在软件公司的开发实践经验,本文就数据库理论和应用实践结合方法进行了探讨,提出了基于反规范冗余技术的数据库设计方法,并就教学中普遍使用的学生选课小系统进行了剖析,进行了动态化设计,在教学中付诸实践取得较好的效果。 相似文献
4.
通过分析线束 CAPP 系统的工艺数据需求及数据之间的联系,建立了工艺方法-材料消耗-消耗定额之间的复杂关系,并以基础物料信息和工艺方法信息为主线,设计了线束工艺数据库的概念模型和逻辑模型.基于所设计的线束工艺数据库开发了线束 CAPP 系统,并通过系统运行实例验证了该工艺数据库设计的合理性. 相似文献
5.
6.
本文阐述了工程数据库在工程勘测设计一体化、智能化体系中的作用与地位,系统功能要求和系统结构特点。并在此基础上,提出了工程勘设数据库的建库模式和设计方法。 相似文献
7.
8.
9.
文章针对工程技术人员流动带来的企业开发能力下降及技术断层问题、公司实践知识流失严重问题及制动系统匹配模拟计算问题,提出构建基于数据库的汽车制动系统知识工程.通过静态数据建设,分类归集、整理企业和行业现有知识资源,形成企业知识工程基础库模块;通过构建试验局域数据和采集分析系统,并通过对试验数据的后台分析,形成企业经验知识库模块.文章还以汽车制动系统知识工程的设计与应用为例,通过制动系统性能匹配分析软件实现制动系统性能预测模块.实践表明,基于数据库的知识工程建设达到了预期的设计目的,同时有效地提升了企业的开发能力,缩短了开发周期. 相似文献
10.
针对企业图书流通管理方式落后、效率低下等现状,设计与实现了图书流通管理系统,分别从系统功能设计、模块设计、数据库设计和系统实现的主要技术这四部分来阐述。 相似文献
11.
12.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(4):573-596
An existing driver–vehicle model with neuromuscular dynamics is improved in the areas of cognitive delay, intrinsic muscle dynamics and alpha–gamma co-activation. The model is used to investigate the influence of steering torque feedback and neuromuscular dynamics on the vehicle response to lateral force disturbances. When steering torque feedback is present, it is found that the longitudinal position of the lateral disturbance has a significant influence on whether the driver’s reflex response reinforces or attenuates the effect of the disturbance. The response to angle and torque overlay inputs to the steering system is also investigated. The presence of the steering torque feedback reduced the disturbing effect of torque overlay and angle overlay inputs. Reflex action reduced the disturbing effect of a torque overlay input, but increased the disturbing effect of an angle overlay input. Experiments on a driving simulator showed that measured handwheel angle response to an angle overlay input was consistent with the response predicted by the model with reflex action. However, there was significant intra- and inter-subject variability. The results highlight the significance of a driver’s neuromuscular dynamics in determining the vehicle response to disturbances. 相似文献
13.
预应力曲线箱梁和异形箱梁的研究 总被引:7,自引:0,他引:7
近年来 ,国内外学者对曲线箱梁和异形箱梁的静力分析理论和计算方法作过大量的研究 ,但这些理论和方法在某种程度上都存在着一定的局限性 ,特别是在实际设计工作中 ,运用起来不能得心应手。为此本文在综合前人已取得经验下 ,针对桥梁结构设计中分析曲线箱梁、异形箱梁 ,经常遇到的难题进行了研究 ,建立一个较为完善的理论和方法 ,编制了等参元空间分析程序。在实际工程中进行实桥试验 ,验证了本文理论和方法的正确性。本文的研究工作更准确描述了箱梁的荷载响应 ,为设计人员提供直观的设计依据。对曲线箱梁和异形箱梁受力特性有了更一步的理解 ,并提出了新的见解 相似文献
14.
SMA是沥青码蹄脂碎石(Stone Matrix Asphal)的缩写,是一种以沥青结合料与少量的纤维稳定剂、细集料,以及较多的填料(矿粉)组成的沥青玛蹄脂,填充于间断级配粗集料骨架间隙中组成一体所形成的沥青混合料,简称SMA。该文介绍了SMA在上海的应用及其施工技术。 相似文献
15.
混凝土的推广使用已有一个世纪,目前在现代工程建设中仍占有重要的地位。而在今天,混凝土的裂缝较为普遍,在桥梁工程中裂缝几乎无所不在,尽管我们在施工中采取各种各样的措施,但收效甚微,裂缝仍然时有出现。该文指出,究其原因,人们对混凝土温度变化所产生的应力注意不够是其中之一,尤其是大体积混凝土。对此,温度应力与温度控制具有重要的意义。 相似文献
16.
利用AVL公司开发的BOOST软件可宏观地描述发动机的热力学过程且优化发动机的性能,而AVL的CRUISE软件可调用BOOST建立的发动机模型.在进行道路循环工况的仿真时,须对发动机全部工况点进行准确的标定.文中采用BOOST开发了发动机的仿真模型.通过调整节气门开度和燃烧模型参数,标定了发动机在多个转速和负荷点的转矩、功率和油耗,较好地模拟了发动机的动力性和经济性.最后基于ECE循环工况,将此模型与CRUISE进行联合仿真,分析了发动机瞬态工况的动力性、油耗和NO_x排放等参数. 相似文献
17.
J. R. Serrano F. J. Arnau V. Dolz A. Tiseira M. Lejeune N. Auffret 《International Journal of Automotive Technology》2008,9(3):277-288
This article presents a two-stage turbocharged heavy-duty diesel (HDD) engine designed to fulfil the US2007 anti-pollution
directive. This directive imposes very restrictive limits on the NOx and particle emissions of HDD engines. In this work,
the possibility of combining particle traps in the exhaust line to reduce soot emissions with very high EGR rates to reduce
NOx emissions is considered. This new generation engine implements two-stage turbocharging in order to improve the bsfc when
the engine is working on steady conditions as well as to optimize the engine transient response. After carrying out the tests,
the results were analyzed and the engine settings were adjusted to maximise its behaviour and minimise pollutant emissions.
NOx and soot emission peaks were also analyzed at engine transient conditions in order to keep them under certain levels,
and thus maintain the overall pollutant emissions to a level that is as low as possible. In summary, a double-stage turbocharging
configuration can greatly improve engine driveability (between 23% and 36% depending on engine speed), while reducing NOx
emissions during transient evolution without increasing opacity peaks beyond the stated limits. 相似文献
18.
19.
该文从研究超薄磨耗层的级配的选择入手,简单分析了超薄磨耗层的结构特点和强度形成机理,给出了几种国内外常用的超薄磨耗层级配范围,并提出了将SAC-10做为其研究的设计级配。在研究超薄磨耗层沥青混合料配合比设计的基础上,通过对SAC-10沥青混合料的马歇尔试验,确定了该沥青混合料的矿料级配和最佳沥青含量。最后采用车辙试验、浸水马歇尔和冻融劈裂试验及小梁弯曲试验等一系列试验,检测超薄磨耗层沥青混合料的各项路用性能,为在实际工程中的应用提供理论依据。 相似文献