Interurban road network planning model with accessibility and robustness objectives

Abstract

Road network planning (or design) problems consist of determining the best investment decisions to be made with regard to the improvement of a road network. In this paper, we propose an optimization model for long-term interurban road network planning where accessibility and robustness objectives are simultaneously taken into account. Three network robustness measures were defined to assess different robustness concerns: network spare capacity; city evacuation capacity; and network vulnerability. The results that may be obtained from the application of the model are illustrated for three random networks. Special attention is given to the implications of adopting each one of the robustness measures upon the optimum solution provided by the model.     

A framework for robustness analysis of road networks for short term variations in supply

There is a growing awareness that road networks, are becoming more and more vulnerable to unforeseen disturbances like incidents and that measures need to be taken in order to make road networks more robust. In order to do this the following questions need to be addressed: How is robustness defined? Against which disturbances should the network be made robust? Which factors determine the robustness of a road network? What is the relationship between robustness, travel times and travel time reliability? Which indicators can be used to quantify robustness? How can these indicators be computed? This paper addresses these questions by developing a consistent framework for robustness in which a definition, terms related to robustness, indicators and an evaluation method are included. By doing this, policy makers and transportation analyst are offered a framework to discuss issues that are related to road network robustness and vulnerability which goes beyond the disconnected definitions, indicators and evaluation methods used so far in literature. Furthermore, the evaluation method that is presented for evaluating the robustness of the road network against short term variations in supply (like incidents) contributes to the problem of designing robust road networks because it has a relatively short computation time and it takes spillback effects and alternative routes into account.     

Improving recovery-to-optimality robustness through efficiency-balanced design of timetable structure

To improve the service quality of the railway system (e.g., punctuality and travel times) and to enhance the robust timetabling methods further, this paper proposes an integrated two-stage approach to consider the recovery-to-optimality robustness into the optimized timetable design without predefined structure information (defined as flexible structure) such as initial departure times, overtaking stations, train order and buffer time. The first-stage timetabling model performs an iterative adjustment of all departure and arrival times to generate an optimal timetable with balanced efficiency and recovery-to-optimality robustness. The second-stage dispatching model evaluates the recovery-to-optimality robustness by simulating how each timetable generated from the first-stage could recover under a set of restricted scenarios of disturbances using the proposed dispatching algorithm. The concept of recovery-to-optimality is examined carefully for each timetable by selecting a set of optimally refined dispatching schedules with minimum recovery cost under each scenario of disturbance. The robustness evaluation process enables an updating of the timetable by using the generated dispatching schedules. Case studies were conducted in a railway corridor as a special case of a simple railway network to verify the effectiveness of the proposed approach. The results show that the proposed approach can effectively attain a good trade-off between the timetable efficiency and obtainable robustness for practical applications.     

An integrated micro–macro approach to robust railway timetabling

With the increasing demand for railway transportation infrastructure managers need improved automatic timetabling tools that provide feasible timetables with enhanced performance in short computation times. This paper proposes a hierarchical framework for timetable design which combines a microscopic and a macroscopic model of the network. The framework performs an iterative adjustment of train running and minimum headway times until a feasible and stable timetable has been generated at the microscopic level. The macroscopic model optimizes a trade-off between minimal travel times and maximal robustness using an Integer Linear Programming formulation which includes a measure for delay recovery computed by an integrated delay propagation model in a Monte Carlo setting. The application to an area of the Dutch railway network shows the ability of the approach to automatically compute a feasible, stable and robust timetable. Practitioners can use this approach both for effective timetabling and post-evaluation of existing timetables.     

Robust models for transportation service network design

In this paper robust models are presented for the transportation service network design problem, using the ferry service network design problem as an example application. The base assumption is that only the mean and an upper bound on the passenger demand are known. In one robust model, this information is supplemented by a lower bound on the demand, whereas in a second robust model, the assumption is made that the variance of the demand is known, in addition to the mean and upper bound. The relationship between the two models is investigated and characterized analytically. A case study using the ferry service in Hong Kong is provided to illustrate the models.     

Multi-scale robustness model for highway networks under flood events

Transportation system infrastructure often experiences severe flood-related disruptions such as overtopping, erosion, and scour. The ensuing damages can result in enormous direct and indirect economic losses to the traffic network and consequently the individuals through conditions like inaccessibility to commuters and reduction in traffic safety. Many studies have claimed that a robust transportation system could significantly prevent such consequences from natural hazards such as floods, highlighting the importance of robustness measures that could be used by decision-makers to properly manage flooded transportation system. Most available measures related to network robustness assessment are qualitative, and while some recent studies have focused on such evaluation using quantitative assessment approaches related to environmental or social-economic operations, they lack the holistic view towards robustness under flood events. This study develops a composite multi-scale transportation-system robustness model considering flood hazards by synthesizing geographical damage recognition, topological functionality analysis, network operation evaluation, and traffic-user loss estimation. This integrated model has been applied in a real-world highway network, mainly revealing that a given intensive flood occurrence at different locations may result in a variety of after-flood disruptions in the transportation network. To assist the asset owners with developing more reasonable prevention and recovery plans, the developed multi-scale robustness index presents both visible multi-denominational flood consequences and an overall post-event transportation-system robustness indicator.     

Two-phase stochastic program for transit network design under demand uncertainty

This paper develops a reliability-based formulation for rapid transit network design under demand uncertainty. We use the notion of service reliability to confine the stochastic demand into a bounded uncertainty set that the rapid transit network is designed to cover. To evaluate the outcome of the service reliability chosen, flexible services are introduced to carry the demand overflow that exceeds the capacity of the rapid transit network such designed. A two-phase stochastic program is formulated, in which the transit line alignments and frequencies are determined in phase 1 for a specified level of service reliability; whereas in phase 2, flexible services are determined depending on the demand realization to capture the cost of demand overflow. Then the service reliability is optimized to minimize the combined rapid transit network cost obtained in phase 1, and the flexible services cost and passenger cost obtained in phase 2. The transit line alignments and passenger flows are studied under the principles of system optimal (SO) and user equilibrium (UE). We then develop a two-phase solution algorithm that combines the gradient method and neighborhood search and apply it to a series of networks. The results demonstrate the advantages of utilizing the two-phase formulation to determine the service reliability as compared with the traditional robust formulation that pre-specifies a robustness level.     

A hybrid optimization-simulation approach for robust weekly aircraft routing and retiming

We address the robust weekly aircraft routing and retiming problem, which requires determining weekly schedules for a heterogeneous fleet that maximizes the aircraft on-time performance, minimizes the total delay, and minimizes the number of delayed passengers. The fleet is required to serve a set of flights having known departure time windows while satisfying maintenance constraints. All flights are subject to random delays that may propagate through the network. We propose to solve this problem using a hybrid optimization-simulation approach based on a novel mixed-integer nonlinear programming model for the robust weekly aircraft maintenance routing problem. For this model, we provide an equivalent mixed-integer linear programming formulation that can be solved using a commercial solver. Furthermore, we describe a Monte-Carlo-based procedure for sequentially adjusting the flight departure times. We perform an extensive computational study using instances obtained from a major international airline, having up to 3387 flights and 164 aircraft, which demonstrates the efficacy of the proposed approach. Using the simulation software SimAir to assess the robustness of the solutions produced by our approach in comparison with that for the original solutions implemented by the airline, we found that on-time performance was improved by 9.8–16.0%, cumulative delay was reduced by 25.4–33.1%, and the number of delayed passengers was reduced by 8.2–51.6%.     

Robust constrained control of uncertain macroscopic fundamental diagram networks

This paper considers modeling and control of uncertain Macroscopic Fundamental Diagram (MFD) systems for multiple-region networks. First, the nonlinear vehicle conservation equations based on MFD dynamics, presented in earlier publications, are transformed to linear equations with parameter uncertainties. The parameter uncertainties include the destination decomposition fractions, that are difficult to estimate in reality. Then, the uncertain linear model is utilized to design a robust feedback controller by an interpolation-based approach. This approach (i) guarantees robustness against all parameter uncertainties, (ii) handle control and state constraints, and (iii) present a computationally cheap solution. The main idea is to interpolate between (i) a stabilizing outer controller that respects the control and state constraints and (ii) an inner robustly stable controller designed by any method. The robust control is further challenged to deal with different relative locations of reference accumulation points on the MFD diagrams. Numerical results for a two-region system show that the uncertain linear model can replace the nonlinear model for modeling and control. Moreover, the robust control law is presented as implicit and explicit solutions, where in the implicit case one linear programming (LP) problem is solved at each time instant, while in the explicit case, the control law is shown as a piecewise affine function of state. Finally, a comparison between the interpolating controller and other controllers in the literature is carried out. The results demonstrate the performance advantages from applying the robust interpolating controller.     

Planning for the unexpected: The value of reserve capacity for public transport network robustness

Public transport networks (PTN) are subject to recurring service disruptions. Most studies of the robustness of PTN have focused on network topology and considered vulnerability in terms of connectivity reliability. While these studies provide insights on general design principles, there is lack of knowledge concerning the effectiveness of different strategies to reduce the impacts of disruptions. This paper proposes and demonstrates a methodology for evaluating the effectiveness of a strategic increase in capacity on alternative PTN links to mitigate the impact of unexpected network disruptions. The evaluation approach consists of two stages: identifying a set of important links and then for each identified important link, a set of capacity enhancement schemes is evaluated. The proposed method integrates stochastic supply and demand models, dynamic route choice and limited operational capacity. This dynamic agent-based modelling of network performance enables to capture cascading network effects as well as the adaptive redistribution of passenger flows. An application for the rapid PTN of Stockholm, Sweden, demonstrates how the proposed method could be applied to sequentially designed scenarios based on their performance indicators. The method presented in this paper could support policy makers and operators in prioritizing measures to increase network robustness by improving system capacity to absorb unexpected disruptions.     

Robust Wardrop’s user equilibrium assignment under stochastic demand and supply: Expected residual minimization approach

Various models of traffic assignment under stochastic environment have been proposed recently, mainly by assuming different travelers’ behavior against uncertainties. This paper focuses on the expected residual minimization (ERM) model to provide a robust traffic assignment with an emphasis on the planner’s perspective. The model is further extended to obtain a stochastic prediction of the traffic volumes by the technique of path choice approach. We show theoretically the existence and the robustness of the ERM solution. In addition, we employ an improved solution algorithm for solving the ERM model. Numerical experiments are carried out to illustrate the characteristics of the proposed model, by comparing with other existing models.     

Robust optimization of distance-based tolls in a network considering stochastic day to day dynamics

This paper investigates the nonlinear distance-based congestion pricing in a network considering stochastic day-to-day dynamics. After an implementation/adjustment of a congestion pricing scheme, the network flows in a certain period of days are not on an equilibrium state, thus it is problematic to take the equilibrium-based indexes as the pricing objective. Therefore, the concept of robust optimization is taken for the congestion toll determination problem, which takes into account the network performance of each day. First, a minimax model which minimizes the maximum regret on each day is proposed. Taking as a constraint of the minimax model, a path-based day to day dynamics model under stochastic user equilibrium (SUE) constraints is discussed in this paper. It is difficult to solve this minimax model by exact algorithms because of the implicity of the flow map function. Hence, a two-phase artificial bee colony algorithm is developed to solve the proposed minimax regret model, of which the first phase solves the minimal expected total travel cost for each day and the second phase handles the minimax robust optimization problem. Finally, a numerical example is conducted to validate the proposed models and methods.     

Transit network design based on travel time reliability

This paper presents a transit network optimization method, in which travel time reliability on road is considered. A robust optimization model, taking into account the stochastic travel time, is formulated to satisfy the demand of passengers and provide reliable transit service. The optimization model aims to maximize the efficiency of passenger trips in the optimized transit network. Tabu search algorithm is defined and implemented to solve the problem. Then, transit network optimization method proposed in this paper is tested with two numerical examples: a simple route and a medium-size network. The results show the proposed method can effectively improve the reliability of a transit network and reduce the travel time of passengers in general.     

Application of multiple criteria decision making for network improvement

In this paper we propose application of multiple criteria decision making to problems of a metropolitan network improvement plan. Initially, a bilevel multiple objective network design model is considered in two objectives which are minimal government budget and minimal total travel time of road users. We seek feasible improvement alternatives among those bottleneck links in an existing road network structure and travel demand. We present an effective heuristic algorithm to obtain noninferior solutions; then ELECTRE III multiple criteria decision making and group decision making are used to evaluate and to select a compromise solution among those noninferior solutions. From the design phase in multiple criteria decision making, multiple objective mathematical programming is used to formulate a continuous network design model. However, from the phase of evaluation, multiple criteria decision making to solve the discrete network design problem. The network of metropolitan Taipei is taken as an example to illustrate the operation of this model.     

Integrating robust timetabling in line plan optimization for railway systems

We propose a heuristic algorithm to build a railway line plan from scratch that minimizes passenger travel time and operator cost and for which a feasible and robust timetable exists. A line planning module and a timetabling module work iteratively and interactively. The line planning module creates an initial line plan. The timetabling module evaluates the line plan and identifies a critical line based on minimum buffer times between train pairs. The line planning module proposes a new line plan in which the time length of the critical line is modified in order to provide more flexibility in the schedule. This flexibility is used during timetabling to improve the robustness of the railway system. The algorithm is validated on the DSB S-tog network of Copenhagen, which is a high frequency railway system, where overtakings are not allowed. This network has a rather simple structure, but is constrained by limited shunt capacity. While the operator and passenger cost remain close to those of the initially and (for these costs) optimally built line plan, the timetable corresponding to the finally developed robust line plan significantly improves the minimum buffer time, and thus the robustness, in eight out of ten studied cases.     

Multi-scale perimeter control approach in a connected-vehicle environment

This paper proposes a novel approach to integrate optimal control of perimeter intersections (i.e. to minimize local delay) into the perimeter control scheme (i.e. to optimize traffic performance at the network level). This is a complex control problem rarely explored in the literature. In particular, modeling the interaction between the network level control and the local level control has not been fully considered. Utilizing the Macroscopic Fundamental Diagram (MFD) as the traffic performance indicator, we formulate a dynamic system model, and design a Model Predictive Control (MPC) based controller coupling two competing control objectives and optimizing the performance at the local and the network level as a whole. To solve this highly non-linear optimization problem, we employ an approximation framework, enabling the optimal solution of this large-scale problem to be feasible and efficient. Numerical analysis shows that by applying the proposed controller, the protected network can operate around the desired state as expressed by the MFD, while the total delay at the perimeter is minimized as well. Moreover, the paper sheds light on the robustness of the proposed controller. This multi-scale hybrid controller is further extended to a stochastic MPC scheme, where connected vehicles (CV) serve as the only data source. Hence, low penetration rates of CVs lead to strong noises in the controller. This is a first attempt to develop a network-level traffic control methodology by using the emerging CV technology. We consider the stochasticity in traffic state estimation and the shape of the MFD. Simulation analysis demonstrates the robustness of the proposed stochastic controller, showing that efficient controllers can indeed be designed with this newly-spread vehicle technology even in the absence of other data collection schemes (e.g. loop detectors).     

Pick‐up locations and bus allocation for transit‐based evacuation planning with demand uncertainty

This paper develops a decision‐support model for transit‐based evacuation planning under demand uncertainty. Demand uncertainty refers to the uncertainty associated with the number of transit‐dependent evacuees. A robust optimization model is proposed to determine the optimal pick‐up points for evacuees to assemble, and allocate available buses to transport the assembled evacuees between the pick‐up locations and different public shelters. The model is formulated as a mixed‐integer linear program and is solved via a cutting plane scheme. The numerical example based on the Sioux Falls network demonstrates that the robust plan yields lower total evacuation time and is reliable in serving the realized evacuee demand. Copyright © 2012 John Wiley & Sons, Ltd.     

Strategic assessment of capacity consumption in railway networks: Framework and model

In this paper, we develop a new framework for strategic planning purposes to calculate railway infrastructure occupation and capacity consumption in networks, independent of a timetable. Furthermore, a model implementing the framework is presented. In this model different train sequences are generated and assessed to obtain timetable independence. A stochastic simulation of delays is used to obtain the capacity consumption. The model is tested on a case network where four different infrastructure scenarios are considered. Both infrastructure occupation and capacity consumption results are obtained efficiently with little input. The case illustrates the model’s ability to quantify the capacity gain from infrastructure scenario to infrastructure scenario which can be used to increase the number of trains or improve the robustness of the system.     

Roadway determinants of bicyclist exposure to volatile organic compounds and carbon monoxide

Few studies have quantified relationships between bicyclist exposure to air pollution and roadway and traffic variables. As a result, transportation professionals are unable to easily estimate exposure differences among bicycle routes for network planning, design, and analysis. This paper estimates the effects of roadway and travel characteristics on bicyclist exposure concentrations, controlling for meteorology and background conditions. Concentrations of volatile organic compounds (VOC) and carbon monoxide (CO) are modeled using high-resolution data collected on-road. Results indicate that average daily traffic (ADT) provides a parsimonious way to characterize the impact of roadway characteristics on bicyclists’ exposure. VOC and CO exposure increase by approximately 2% per 1000 ADT, robust to different regression model specifications. Exposure on off-street facilities is higher than at a park, but lower than on-street riding – with the exception of a path through an industrial corridor with significantly higher exposure. VOC exposure is 20% higher near intersections. Traffic, roadway, and travel variables have more explanatory power in the VOC models than the CO model. The quantifications in this paper enable calculation of expected exposure differences among travel paths for planning and routing applications. The findings also have policy and design implications to reduce bicyclists’ exposure. Separation between bicyclists and motor vehicle traffic is a necessary but not sufficient condition to reduce exposure concentrations; off-street paths are not always low-exposure facilities.     

Modeling and solving discrete network design problem with stochastic user equilibrium

In this paper, we address the discrete network design problem, which determines the addition of new roads to existing transportation network to optimize the transportation system performance. Road users are assumed to follow the traffic assignment principle of stochastic user equilibrium. A mixed‐integer nonlinear nonconvex problem is developed to model this discrete network design problem with stochastic user equilibrium. The original problem is relaxed into a convex mixed‐integer nonlinear program, whose solution provides a lower bound of the original problem. The relaxed problem is then embedded into two proposed global optimization solution algorithms to obtain the global optimal solution of the problem. Copyright © 2016 John Wiley & Sons, Ltd.