PIC-MF-based Iterative Receiver for Multiuser Space Frequency Block Coding Systems

A novel low-complexity iterative receiver for multiuser space frequency block coding (SFBC) system was proposed in this paper. Unlike the conventional linear minimum mean square error (MMSE) detector, which requires matrix inversion at each iteration, the soft-in soft-out (SISO) detector is simply a parallel interference cancellation (PIC)-matched filter (MF) operation. The probability density function (PDF) of PIC-MF detector output is approximated as Gaussian, whose variance is calculated with a priori information fed back from the channel decoder. With this approximation, the log likelihood ratios (LLRs) of transmitted bits are under-estimated. Then the LLRs are multiplied by a constant factor to achieve a performance gain. The constant factor is optimized according to extrinsic information transfer (EXIT) chart of the SISO detector. Simulation results show that the proposed iterative receiver can significantly improve the system performance and converge to the matched filter bound (MFB) with low computational complexity at high signal-to-noise ratios (SNRs).     

A Novel Iterative Receiver Based on Extrinsic Information Update for MIMO Systems

A novel iterative receiver for multiple input multiple output (MIMO) systems was introduced. Its basis concept is that the reliability of extrinsic information will be strengthened with continuous iterations. Extrinsic information of present iteration is added with prior information of last iteration to obtain performance gain. The simulation results show that the improved iterative receiver can approach the 5th iteration performance of conventional soft interference cancellation (SIC)-minimum mean square error (MMSE) iterative receiver after the 2nd iteration with less computational complexity. Compared with conventional iterative receiver, the improved iterative receiver has 1dB performance gain at bit error rate (BER) of 10~ -5 , with four transmit antennas and four receive antennas system.     

Lattice reduction aided MMSE Tomlinson-Harashima precoding based on VBLAST algorithm for MIMO systems

A lattice reduction aided （LRA） minimum mean square error （MMSE） Tomlinson-Harashima precoding （THP） was proposed based on vertical Bell Labs layered space time （VBLAST） algorithm for multiple input multiple output （MIMO） systems. The extended channel was used to provide optimal tradeoff between residual interference and noise amplification. The processing based on lattice reduction method helps achieve maximal diversity order. The VBLAST algorithm was applied to get the optimal processing ordering for successive interference cancellation （SIC） at transmitter. Simulation results show that the proposed algorithm outperforms conventional THP and the LRA zero-forcing （ZF） THP with full diversity order.     

Closed Loop Space-Time Block Coding for Wireless Downlink Transmission

In order to improve the poor performance of Space-Time Block Coding (STBC) in a downlink correlated fading environment, a closed loop scheme is proposed. With the known channel fading statistics fed from the receiver, eigenbeamforming is utilized to improve the performance of STBC at the transmitter. The new system achieves the array and diversity gain simultaneously. Because reduced dimension processing is adopted, the proposed system has a relative simple structure compared with the traditional beamforming system. The validity of the scheme is verified in several situations by simulation experiments.     

MODELING OF NONLINEAR SYSTEMS BY MULTIPLE LINEARIZED MODELS

ＩｎｔｒｏｄｕｃｔｉｏｎＡｌｍｏｓｔｅｖｅｒｙｌｉｎｅａｒｏｆｎｏｎｌｉｅａｒｃｏｎｔｒｏｌｓｔｒａｔｅｇｙｃｅｎｔｅｒｓａｒｏｕｎｄａｐｒｏｃｅｓｓｍｏｄｅｌ,ｗｉｔｈｒｅａｌｌｉｆｅｐｒｏｃｅｓｓｅｓｂｅｉｎｇｕｓｕａｌｌｙｎｏｎｌｉｎｅａｒ．Ｔｈｅａｃｃｕｒａｃｙｏｆｔｈｅｍｏｄｅｌｃｏｕｌｄｄｉｒｅｃｔｌｙｉｎｆｌｕｅｎｃｅｔｈｅｐｅｒｆｏｒ－ｍａｎｃｅｏｆｔｈｅｆｉｎａｌｃｏｎｔｒｏｌｌｅｒ．Ｌｉｎｅａｒｍｏｄｅｌｓａｌ－ｗａｙｓｌｅａｄｔｏａｒｅｌａｔｉｖｅｓｉｍｐｌｉｃｉｔｙｉｎｔ…     

Simple closed-loop method to compensate interference asymmetry in time-division duplex MIMO-OFDM systems

In wireless communications systems with time-division duplex (TDD) deployment, channel reciprocity and symmetric interference between transmitter and receiver sides are two widely-adopted assumptions for the design of optimal adaptation transmission mode. However, in practice, there is an undesirable but non-negligible effect, namely the asymmetric interference, that makes the assumptions no longer valid. In this paper, a simple closed-loop feedback method of compensating interference asymmetry in TDD multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) system is proposed. The system makes the estimated interference at transmit-side be able to track the instantaneous receive-side interference dynamically. The proposed method maintains constant frame error rate (FER) by adopting adaptive modulation coding (AMC) and power loading. The final simulations have verified the effectiveness of the new method.     

天线分集的MIMO系统的容量分析

结合空间分集和极化分集，对MIMO—OFDM系统中的容量进行研究。在IEEE 802．16d室内多径环境下，对使用2根发射天线和2根接收天线的MIMO—OFDM系统进行了深入研究。在发射端和接收端，空间分集和极化分集技术同时应用在MIMO—OFDM系统中。为了比较，对仅使用空间分集的通信系统容量也进行了讨论。     

BLIND DIFFERENTIAL ADAPTIVE MULTIUSER DETECTION

IntroductionThe problem of combating multi- access interfer-ence ( MAI) in CDMA systems has receivedgreat attention recently[1～ 3] . In Ref. [4 ] ,M.Honig employed a blind adaptive multiuser de-tector based on the minimization of mean- out-put- energy( MOE) to overcome MAI,and itre-quired no more knowledge than did the conven-tional single- user receiver.Surplus energy wasemployed to suppress the effects of multi- accessinterference and thus provided an optimal detec-tion solution. The…     

Improved Space-Time Selective Interference Cancellation Scheme for CDMA Systems

IntroductionAdaptiveantennaarrayscanreduceco channelinterference (CCI)fromotherusersaswellasmitigatetheeffectofmultipathfadinginwirelessenvironments .SinceCDMAsystemsareinterferencelimitedinnature ,smartantennahasbeenregardedasoneofthecoresystemcomponents…     

平飞模式双站SAR运动补偿研究

机载双站SAR收、发分置,收、发平台产生的运动误差是独立的,增加了双站SAR运动补偿技术的复杂性.文中建立了平飞模式的双站SAR运动误差模型,在双站模型等效到单站的基础上,对双站SAR运动补偿方法进行了研究,基于模型等效的思路提出了基于回波数据运动补偿的方案.并讨论了PGA自聚焦算法的可行性,给出了相应的计算机仿真.     

ANALYSIS OF A CUMULANT-BASED 2D-RAKE RECEIVER FOR CDMA SYSTEM OVER FREQUENCY-SELECTIVE FADING CHANNELS

Code divisionmultipleaccess (CDMA )isaspread spectrummultipleaccessschemethatisex pectedtogainasignificantshareofthecellularmar ket.CDMAhasseveralattractivepropertiesforper sonalcommunications.Andifallmobileradiosig nalsarrivingatthebasestationaresynchronizedtowithinafraction ,thesynchronousCDMA (S CD MA)systemscanenhancethebandwidthefficiencytoa greaterdegreebyemployingorthogonalcodewords.However,S CDMAsystemshavefunda mentaldifficultieswhenutilizedinafrequency se lectivefadingenviron…     

Complexity Iterative Receiver for Turbo-BLAST over Frequency Selective Fading Channels

The computationally efficient iterative receiver is investigated for Turbo-BLAST ( Bell Labs layered space time) system over frequency selective fading channels. Compared with the conventional receiver based on soft interference cancellation ( SIC), an iterative detection scheme based on bit-level cancellation is presented to reduce the complexity of the receiver by decomposing of an M-QAM constellation into a linear combination of binary constellations. Simulation results demonstrate that compared with the conventional SIC scheme, the proposed scheme based on bit-level cancellation performs almost as well as the SIC scheme after several iterations while proving a lot of saving in computational complexity.     

Impact of channel estimation error on channel capacity of multiple input multiple output system

In order to investigate the impact of channel estimation error on channel capacity of multiple input multiple output （MIMO） system, a novel method is proposed to explore the channel capacity in correlated Rayleigh fading environment. A system model is constructed based on the channel estimation error at receiver side. Using the properties of Wishart distribution, the lower bound of the channel capacity is derived when the MIMO channel is of full rank. Then a method is proposed to select the optimum set of transmit antennas based on the lower bound of the mean channel capacity. The novel method can be easily implemented with low computational complexity. The simulation results show that the channel capacity of MIMO system is sensitive to channel estimation error, and is maximized when the signal-to- noise ratio increases to a certain point. Proper selection of transmit antennas can increase the channel capacity of MIMO system by about 1 bit/s in a flat fading environment with deficient rank of channel matrix.     

Focusing azimuth-invariant bistatic synthetic aperture radar data based on a polynomial model

In this paper, a focusing approach is presented to widen the use of efficient monostatic imaging algorithms for azimuth-invariant bistatic synthetic aperture radar (SAR) data. The bistatic range history is modeled by a polynomial of azimuth time. Using this model, an analytic form of the signal spectrum in the 2D frequency domain is derived, and a simple single-valued relation between the transmitter and receive ranges is established. In this way, a lot of monostatic image formation algorithms can be extended for the bistatic SAR data, and a bistatic chirp scaling algorithm is developed as an application of the new approach. This algorithm can be used to process the azimuth-invariant bistatic configuration where the transmitter and receiver platforms are moving on parallel tracks with the same velocity. In addition, some simulation results are given to demonstrate the validity of the proposed approach.     

The Modified Multiple Model Switching Tuning Control Application in AVC

In the complex mechanical vibration environment, the dominant frequency of the system varies remarkably and swiftly under various running conditions, which also characterizes uncertainty and time-variation. It is very impending and important to suppress or isolate the detrimental vibrations related to the above memtoned system with active vibration control (AVC) technology. This paper presented the improved linear quadratic gaussian (LQG) control scheme with a specified filter to realize broadband disturbance/noise attenuation and assure intensive suppression of vibration at the key vibration frequency, then applies and modifies the multiple model switching tuning (MMST) control method by disturbance observation to track the variation of dominant vibration component timely. The effectiveness and superiority of the presented control method were demonstrated by numerical simulation and AVC experiment on a flexible cantilever beam under sweeping excitation.     

Switching between antenna subset selection and quasi-orthogonal space-time block code in presence of correlation

We address the problem of adaptive modulation and coding scheme (AMCS) for a multi-input multioutput (MIMO) system in presence of time-varying transmitting correlation. Antenna subset selection and quasiorthogonal space-time block code (QOSTBC) have different error performances with different signal-to-noise ratios (SNRs) and in different spatial correlation scenarios. The error performance can be improved by selecting an appropriate transmission scheme to adapt to various channel conditions. The maximum distance criterion is the simplest and very effective algorithm for the antenna subset selection without needs of complex calculation and channel state information at transmitter (CSIT). The minimum error performance criteria and the simplified linear decision strategy are developed for constant transmission rate traffic to select the optimal transmission scheme. It can dramatically decrease algorithm complexity for obtaining error probability according to the known quantities comparing with using instant CSIT. Simulation results show that, remarkable performances including low SNR and weak spatial correlation at the expense of simple calculation and almost no bandwidth loss by adopting AMCS can be achieved. The proposed AMCS improves robustness of slowly varying spatial correlated channels.     

基于简化WITI指标的机场延误预测方法

为实现在战略或预战术阶段对恶劣天气条件下的机场延误进行有效预测,本文引入简化的天气影响交通指标(WITI),采用灰色关联分析的方法,验证该指标与机场延误之间的关联性,再分别以WITI指标和传统指标构建多元线性回归模型和BP神经网络预测模型,对广州白云国际机场(ZGGG)和深圳宝安国际机场(ZGSZ)的离场延误进行预测.结果显示,WITI指标与机场离场延误之间的关联度明显高于传统指标,基于WITI指标比基于传统指标构建的多元线性回归模型,在预测准确度上高出14.09%(ZGGG)和9.79%(ZGSZ),同样在BP神经网络模型中则高出8.00%(ZGGG)和6.41%(ZGSZ),由此认为WITI指标在机场延误预测中具有更好的应用效果.     

基于改进射线跟踪法的隧道环境无线信道仿真

隧道环境与陆地上移动通信有显著不同,需要对其无线信道特性进行研究.本文提出了一种改进的射线跟踪法,能够对隧道环境无线信道特性高效地仿真,降低了射线跟踪的计算复杂度,同时采用一种新的坐标系描述弯道的几何形状,便于对弯道部分进行射线跟踪.本文将路径损耗的仿真结果与北京地铁14号线的实测结果进行对比,对比表明：改进的射线跟踪法能够有效地预测路径损耗;直道中K因子在-8~25 d B范围内变化,且随着距离增大有减小的趋势.     

New applications of EXIT chart for iterative decoding systems

Applications on iterative control and multiple input multiple output （MIMO） system were developed. Two new charts derived from extrinsic information transfer （EXIT） chart were employed as the designing tools, which are called as output mutual information chart with defined iterative degree （DID） chart and near optimum output mutual information （NOMI） chart respectively. Different from the EXIT chart, they can show the iterative performance on the whole signal-to-noise ratio range with one single curve, whereas computation complexity is greatly reduced compared with conventional bit error ratio （BER） performance curve. The iterative control was implemented according to a near-optimum iterative degree vector determined by NOMI chart, the reasonability of uncertain parameters was analyzed in one MIMO system. The concepts were illustrated based on bit-interleaved coded modulation with iterative decoding （BICM-ID）.     

Solving resource-constrained multiple project scheduling problem using timed colored Petri nets

To solve the resource-constrained multiple project scheduling problem (RCMPSP) more effectively, a method based on timed colored Petri net (TCPN) was proposed. In this methodology, firstly a novel mapping mechanism between traditional network diagram such as CPM (critical path method)/PERT (program evaluation and review technique) and TCPN was presented. Then a primary TCPN (PTCPN) for solving RCMPSP was modeled based on the proposed mapping mechanism. Meanwhile, the object PTCPN was used to simulate the multiple projects scheduling and to find the approximately optimal value of RCMPSP. Finally, the performance of the proposed approach for solving RCMPSP was validated by executing a mould manufacturing example.