共查询到20条相似文献,搜索用时 187 毫秒
1.
深水工程勘察船是集各类先进勘察和分析设备于一体的综合性集群载体,既是工程勘察作业船,又是一个海上"实验室".不仅要考虑船舶承受的常规载荷,还要为满足勘察作业要求,考虑众多设备的布置和加强以及控制评估船体结构的振动与噪音. 相似文献
2.
《航道工程地质勘察规范》(JTS133—3—2010)是按工程类别对各勘察阶段的勘察工作进行规定的,不利于从宏观上把握工程地质条件,建议按照勘察阶段,分别对各类工程进行规定,并对各勘察阶段勘察报告的主要内容进行规定;规范缺少堤防工程地质勘察的规定,建议增加堤防工程地质勘察的规定,这样有利于统筹考虑勘察方案;规范未将渠化工程中航道工程很好地融入,建议将渠化工程融入进来,形成一个完整的航道工程体系勘察规范,便于使用。 相似文献
3.
港珠澳大桥岛隧工程,勘察过程中建立组织机构使设计与勘察紧密结合,国内设计单位会同国外有经验设计咨询公司对勘察进行管理,确保勘察工作满足设计需求;勘察过程全面执行国际标准,采用具有国际先进水平大型勘察设备(如海上液压升降钻探平台、具有波浪补偿功能的钻探设备及海床式CPTU设备),按国际标准进行勘察作业及试验,尽量减少对原状样的扰动;结合设计所需参数按照国际标准开展有针对性试验,对勘察结果采用三维地质模型进行数据处理;勘察成果优于常规勘察并已在岛隧工程实施中得到检验。总结本次勘察的组织与实施经验,希望为今后国内大型项目的地质勘察提供参考,有助于推动我国精细化地质勘察的推广。 相似文献
4.
港珠澳大桥岛隧工程,勘察过程中建立组织机构使设计与勘察紧密结合,国内设计单位会同国外有经验设计咨询公司对勘察进行管理,确保勘察工作满足设计需求;勘察过程全面执行国际标准,采用具有国际先进水平大型勘察设备(如海上液压升降钻探平台、具有波浪补偿功能的钻探设备及海床式CPTU设备),按国际标准进行勘察作业及试验,尽量减少对原状样的扰动;结合设计所需参数按照国际标准开展有针对性试验,对勘察结果采用三维地质模型进行数据处理;勘察成果优于常规勘察并已在岛隧工程实施中得到检验。总结本次勘察的组织与实施经验,希望为今后国内大型项目的地质勘察提供参考,有助于推动我国精细化地质勘察的推广。 相似文献
5.
6.
7.
8.
9.
10.
11.
12.
计入船体变形激励的大型船舶推进轴系振动性能研究 总被引:1,自引:0,他引:1
大型船舶的船体变形与其推进系统之间的耦合影响成为船舶领域的研究热点,开展船体变形激励下的推进轴系振动性能的研究对保证船舶可靠运行十分必要。文章以船舶轴系动力学方程为研究基础,建立其计入船体变形激励的大型船舶推进轴系的动力学模型并通过解析解与数值解的对比验证了方法的可靠性。依据此模型,以某大型集装箱船舶为研究对象,分别探索了船体变形激励不确定方向下以及变尺寸参数下轴系振动的影响规律,为大型船舶船体变形激励下的轴系振动问题提供了理论基础。 相似文献
13.
探讨了考虑机械噪声和螺旋桨噪声共同作用下物探船水下辐射噪声有效计算方法,采用基于结构有限元-声学边界元的声固耦合模式直接一体化计算水下总辐射噪声级。建立了某物探船整船三维结构有限元模型以及流体声学边界元模型。在船体总振动响应分析基础上,将螺旋桨噪声以点声源的形式与机械振动源同时输入到统一声学环境中求解,对物探船水下辐射噪声进行数值预报,给出了物探船辐射噪声指向特性,并比较了两类噪声源一体化计算方法与直接叠加合成方法在物探船水下辐射噪声计算结果的差异。研究表明,采用机械噪声与螺旋桨噪声直接叠加合成总辐射声级的方法在工程精度上可接受,但一体化计算是更合理的处理方式。 相似文献
14.
自升自航式风车安装船为海洋工程专业特种船舶,在风机运输,安装中有很高的实际利用价值。采用直接计算法,对航行工况下自升自航式风电安装船的总强度进行评估。建立了船体和桩腿的有限元建模,基于三维势流理论对波浪垂直弯矩进行长期预报,得到风车安装船在典型装载工况下的设计波参数,将船舶在设计波中的重力、静水压力、水动压力、惯性力等施加到模型上进行直接强度分析,对航行工况下船体和桩腿的强度进行了校核。本文的计算方法及结果可为自升自航式风车安装船的整体强度评估、船体结构优化提供有效依据,并且对同类工程船的设计开发具有指导意义。 相似文献
15.
分析了我国首艘深水工程勘察船"海洋石油708"的船型特点,对其总体性能进行了研究,解决了该船的耐波性和船舶稳性方面的问题。 相似文献
16.
介绍海港LNG船舶航行实行交通管制的原因,对比分析了LNG船舶与LPG船舶的危险性。结合我国内河液体散货运输船舶航行管理现状,对小型LNG船舶在内河航行的可能风险及应对措施进行探讨,认为采用双壳双底结构的小型LNG船舶在我国内河正常航行是可行的,不需要采取特殊的交通管制措施。 相似文献
17.
考虑到半潜船海上运输超宽悬垂货物过程中可能发生波浪砰击,提出利用波浪势流理论及超宽悬垂货物海运过程中砰击控制条件的数值模拟方法,以半潜式“海上渔场”载运为例,利用OCTOPUS软件建立计算模型,模拟海运过程中不同海况、航行吃水及航速情况下,船舶横摇、纵摇、垂荡、“海上渔场”砰击发生概率及砰击载荷的变化情况,“海上渔场”海运过程砰击数值模拟结果与工程实际数据十分吻合,验证了数值模拟方法的合理、可行。 相似文献
18.
For bulk carriers in hogging, the most critical situation is the alternate hold loading (AHL) condition with odd numbered
holds loaded with high density cargoes and even numbered holds empty. The effect of the local lateral pressure loads should
be considered in the assessment of ultimate hull girder strength in the hogging and AHL conditions. In the present paper the
ultimate strength of a Capesize bulk carrier hull girder under combined global and local loads in the hogging and AHL condition
is extensively and systematically investigated using nonlinear finite element (FE) analysis with ABAQUS software. Since the
bulk carrier used as a reference vessel in this study is an old design we also studied the effect of modified scantlings by
multiplying the plate thickness in the bottom structure by a design modification factor (DMF). In particular, it should be
noted that a DMF of 1.4 gives a design in accordance with the new CSR rules. Based on the results obtained by nonlinear FE
analyses, a practical interaction equation is established between global hogging bending capacity and average external sea
pressure over the bottom. 相似文献
19.
双尾鳍供油船具有一定的优势和典型特点.它的推出很好地把握了市场上对供油船在操纵性上比较重视的特点.主要从总体设计的角度介绍了针对市场需求而开发的3 600 DWT双尾鳍供油船的基本概况、设计特点、主要要素和在型线上的考虑.结合双尾鳍型线特点介绍了本船在快速型、操纵性和燃油经济性上的优势.通过实船试航的测量结果对该船良好的操纵性进行了验证. 相似文献
20.
Forng-Chen Chiu Wen-Chuan Tiao Jenhwa Guo 《Journal of Marine Science and Technology》2009,14(2):228-239
The present study focuses on the nonlinear behavior of pressure on the hull surface of a high-speed vessel in irregular waves,
particularly the pressure responses of alternately wet and dry areas near the waterline and on the bow zone. The vessel has
high deadrise angles that may be subject to slight impact and water pile-up effects. A series of experiments in regular and
irregular head waves were conducted, and the validity of applying Volterra modeling was investigated. In a previous article
using experimental data in regular waves, it was confirmed that the approximate third-order Volterra model adequately simulated
the variation of pressure responses in regular waves of different steepness up to a wave amplitude with a wavelength ratio
of 0.01, even for the highly nonlinear pressures acting on the abovementioned areas of the hull surface. In this article,
further validation for the second part of the study was obtained using experimental data in irregular waves. The frequency
response functions obtained from the previous study’s experimental data in regular waves were applied to the third-order Volterra
model by combining the input of irregular waves to simulate the responses in irregular waves of sea state five. Then, the
spectra and statistics were analyzed. For the motions, accelerations, and pressure responses in irregular waves (as well as
for the simulated time histories) variance spectra and statistics such as cumulative distributions of peak values and probability
density functions were compared with the experimental results. It was confirmed that even for highly nonlinear and non-Gaussian
pressures on the abovementioned areas of the hull surface, the approximate third-order Volterra model simulates the pressure
responses in irregular head waves up to a sea state of five with adequate accuracy on deterministic and statistical bases. 相似文献