Distributed surveillance on freeways emphasizing incident detection and verification

Efficient freeway management requires continuous decision-making based on conditions on the network and an understanding of the impacts of the decisions made. These conditions are usually measured with fixed-point surveillance systems, most of which are deployed in such a manner as to require communication links that are always connected and are polled at regular intervals. All of the sensor data are typically sent to a Traffic Management Center (TMC) for assessment, yet most of the time no action is taken in response to the data, leading to unnecessarily high communication costs.To reduce communication costs without a significant loss in the quality of information received at the TMC this paper lays the foundation for an event driven communication system by examining the sequence of events at the detector stations in the context of incident detection. Where, following the broadest convention on freeways, an incident is any non-recurring event that causes a temporary bottleneck and restricts flow. Although the focus is incident detection, the proposed communication system could easily support many other applications that use aggregate data, e.g., measuring average annual daily travel (AADT). The methodology is generalizable to most common freeway geometries and care is taken in the paper to specifically address the situation where an incident interacts with a recurring bottleneck.To address the normally high communications costs, a portion of the decision-making process is transferred from the TMC to the field controllers, which would make the initial evaluation of conditions and only send data that might elicit a control response or benefit comparative decisions between detector stations. In other words, rather than relying on the conventional, centrally polled communication system, these events could be used to initiate communication from the field when the potential value outweighs the cost per communication. The process could also lead to better data handling for decision-making or archiving in a conventional, polled communication system as well. We develop the methodology by deconstructing several incidents on a freeway and identify the observable events at a pair of detector stations that may be upstream, downstream or straddle the incident. This analytical process could be repeated for any other condition of interest.     

Model uncertainty and the management of a system of infrastructure facilities

The network-level infrastructure management problem involves selecting and scheduling maintenance, repair, and rehabilitation (MR&R) activities on networks of infrastructure facilities so as to maintain the level of service provided by the network in a cost-effective manner. This problem is frequently formulated as a Markov decision problem (MDP) solved via linear programming (LP). The conditions of facilities are represented by elements of discrete condition rating sets, and transition probabilities are employed to describe deterioration processes. Epistemic and parametric uncertainties not considered within the standard MDP/LP framework are associated with the transition probabilities used in infrastructure management optimization routines. This paper contrasts the expected costs incurred when model uncertainty is ignored with those incurred when this uncertainty is explicitly considered using robust optimization. A case study involving a network-level pavement management MDP/LP problem demonstrates how explicitly considering uncertainty may limit worst-case MR&R expenditures. The methods and results can also be used to identify the costs of uncertainty in transition probability matrices used in infrastructure management systems.     

An activity-episode generation model that captures interactions between household heads: development and empirical analysis

In this paper, we develop an approach for modeling the daily number of non-work, out-of-home activity episodes for household heads that incorporates in its framework both interactions between such members and activity setting (i.e. independent and joint activities). Trivariate ordered probit models are estimated for the heads of three household types – couple, non-worker; couple, one-worker; and couple, two-worker households – using data from a trip diary survey that was conducted in the Greater Toronto Area (GTA) during 1987. Significant interactions between household heads are found. Moreover, the nature of these interactions is shown to vary by household type implying that decision-making structures and, more generally, household dynamics also vary by household type. In terms of predictive ability, the models incorporating interactions are found to predict more accurately than models excluding interactions. The empirical findings emphasize the importance of incorporating interactions between household members in activity-based forecasting models.     

An integrated framework to jointly model decisions of activity time allocation and work-related travel

Five activity-travel choice dimensions, including three activity time allocation decisions and two work-related travel choices, are jointly modeled using the structural equation model in order to accommodate the complex interactions among them. Via a two-step estimation approach, the behavioral pattern underlying activity-travel decisions is explicitly revealed. For example, it demonstrates the priority with respect to subsistence activity, maintenance activity, and recreation activity due to a limited time budget; and bus commuting behavior positively influences the time allocated to the maintenance activity. In addition, two attitudinal factors are constructed and confirmed to have important effects on the five behavioral dimensions, which contribute to reveal the decision-making process from the perspective of psychology. This comprehensive framework is expected to provide important implications for mobility management and urban planning.     

Risk-based maintenance and rehabilitation decisions for transportation infrastructure networks

A method for determining optimal risk-based maintenance and rehabilitation (M&R) policies for transportation infrastructure is presented. The proposed policies guarantee a certain performance level across the network under a predefined level of risk. The long-term model is formulated in the Markov Decision Process framework with risk-averse actions and transitional probabilities describing the uncertainty in the deterioration process. The well known Conditional Value at Risk (CVaR) is used as the measure of risk. The steady-state risk-averse M&R policies are modeled assuming no budget restriction. To address the short-term resource allocation problem, two linear programming models are presented to generate network-level polices with different objectives. While the proposed methodology is general and can be used with any performance indicator, pavement roughness is used for numerical studies and an analytical expression for computing CVaR is derived.     

Joint inventory-location problem under the risk of probabilistic facility disruptions

This paper studies a reliable joint inventory-location problem that optimizes facility locations, customer allocations, and inventory management decisions when facilities are subject to disruption risks (e.g., due to natural or man-made hazards). When a facility fails, its customers may be reassigned to other operational facilities in order to avoid the high penalty costs associated with losing service. We propose an integer programming model that minimizes the sum of facility construction costs, expected inventory holding costs and expected customer costs under normal and failure scenarios. We develop a Lagrangian relaxation solution framework for this problem, including a polynomial-time exact algorithm for the relaxed nonlinear subproblems. Numerical experiment results show that this proposed model is capable of providing a near-optimum solution within a short computation time. Managerial insights on the optimal facility deployment, inventory control strategies, and the corresponding cost constitutions are drawn.     

Modeling household activity–travel interactions as parallel constrained choices

The daily activity-travel patterns of individuals often include interactions with other household members, which we observe in the form of joint activity participation and shared rides. Explicit representation of joint activity patterns is a widespread deficiency in extant travel forecasting models and remains a relatively under-developed area of travel behavior research. In this paper, we identify several spatially defined tour patterns found in weekday household survey data that describe this form of interpersonal decision-making. Using pairs of household decision makers as our subjects, we develop a structural discrete choice model that predicts the separate, parallel choices of full-day tour patterns by both persons, subject to the higher level constraint imposed by their joint selection of one of several spatial interaction patterns, one of which may be no interaction. We apply this model to the household survey data, drawing inferences from the household and person attributes that prove to be significant predictors of pattern choices, such as commitment to work schedules, auto availability, commuting distance and the presence of children in the household. Parameterization of an importance function in the models shows that in making joint activity-travel decisions significantly greater emphasis is placed on the individual utilities of workers relative to non-workers and on the utilities of women in households with very young children. The model and methods are prototypes for tour-based travel forecasting systems that seek to represent the complex interaction between household members in an integrated model structure.     

Ensemble based traffic light control for city zones using a reduced number of sensors

Rapid advances in computing, sensing and telecommunication technology offer unprecedented opportunities for artificial intelligence concepts to expand their applications in the field of traffic management and control. Our methodology gravitates around a powerful decision-making method: ensemble-based systems. This technique is used to accurately classify the near future traffic conditions and to make efficient decisions for adapting the traffic lights sequences within an urban area to optimize the traffic flows. The proposed approach requires only measurements provided by traffic sensors located along the principal roads entering the zone. This reduced number of sensors are considered to be enough relevant for classifying the near future state of the traffic and moreover, their measurements can be validated through analytical/hardware redundancy. Our methodology is meant to be implemented within the framework of a wireless sensor and actuator network and is confirmed by computer simulation, including normal or abnormal traffic conditions, for the central part of the city of Timisoara-Romania.     

Modal split and urban public transport management in an Eastern European country

When public transport is the main means of travel in urban areas, management and planning are easy and the main objective can be to minimise costs for the demand available, i.e. maximise profit. However when public transport faces competition from other modes of transport, and activities can be undertaken in a variety of locations, then the management and planning of public transport services is considerably more difficult.This paper examines a methodology for representing consumer behaviour when faced with alternative travel decisions, in order to identify the demand for public transport and to help operators adjust services and prices to maximise demand, when considering people's disposable income, the alternative modes and activity locations available. From this it is possible to devise criteria for maximising consumer surplus in a city, taking into account social benefits.     

A methodology to control urban traffic noise under the constraint of environmental capacity: A case study of a double-decision optimization model

This paper presents a novel methodology to control urban traffic noise under the constraint of environmental capacity. Considering the upper limits of noise control zones as the major bottleneck to control the maximum traffic flow is a new idea. The urban road network traffic is the mutual or joint behavior of public self-selection and management decisions, so is a typical double decision optimization problem.The proposed methodology incorporates theoretically model specifications. Traffic noise calculation model and traffic assignment model for O–D matrix are integrated based on bi-level programming method which follows an iterated process to obtain the optimal solution. The upper level resolves the question of how to sustain the maximum traffic flow with noise capacity threshold in a feasible road network. The user equilibrium method is adopted in the lower layer to resolve the O–D traffic assignment.The methodology has been applied to study area of QingDao, China. In this illustrative case, the noise pollution level values of optimal solution could satisfy the urban environmental noise capacity constraints. Moreover, the optimal solution was intelligently adjusted rather than simply reducing the value below a certain threshold. The results indicate that the proposed methodology is feasible and effective, and it can provide a reference for a sustainable development and noise control management of the urban traffic.     

Jointly optimizing cost, service, and environmental performance in demand-responsive transit scheduling

In certain fleet systems, the environmental impacts of operation are, to some extent, a controllable function of vehicle routing and scheduling decisions. However, little prior work has considered environmental impacts in fleet vehicle routing and scheduling optimization, in particular, where the impacts were assessed systematically utilizing life-cycle impact assessment methodologies such as those described by the Society of Environmental Chemistry and Toxicology. Here a methodology is presented for the joint optimization of cost, service, and life-cycle environmental consequences in vehicle routing and scheduling, which we develop for a demand-responsive (paratransit or dial-a-ride) transit system. We demonstrate through simulation that, as a result of our methodology, it is possible to reduce environmental impacts substantially, while increasing operating costs and service delays only slightly.     

Transportation of dangerous goods by road: the Brazilian case for selection of carriers based on a risk management methodology

Abstract

This article applies a methodology for selecting carriers for the transportation of dangerous goods by road, with a special focus on risk management aspects. The methodology makes use of Stated Preference techniques and verifies the most critical risk-related variables influencing decision-making from the shippers' point of view. It embraces the planning and execution stages, an evaluation of the contracted company and a feedback process. The methodology was effectively applied to the case of liquid fuel shippers in the Brazilian middle-west region where it proved possible to identify which dangerous goods road transport company to contract in accordance with the risk management factors selected by the decision makers.     

The price of uncertainty in pavement infrastructure management planning: An integer programming approach

Currently there is a true dichotomy in the pavement maintenance and rehabilitation (M&R) literature. On the one hand, there are integer programming-based models that assume that parameters are deterministically known. On the other extreme, there are stochastic models, with the most popular class being based on the theory of Markov decision processes that are able to account for various sources of uncertainties observed in the real-world. In this paper, we present an integer programming-based alternative to account for these uncertainties. A critical feature of the proposed models is that they provide – a priori – probabilistic guarantees that the prescribed M&R decisions would result in pavement condition scores that are above their critical service levels, using minimal assumptions regarding the sources of uncertainty. By construction of the models, we can easily determine the additional budget requirements when additional sources of uncertainty are considered, starting from a fully deterministic model. We have coined this additional budget requirement the price of uncertainty to distinguish from previous related work where additional budget requirements were studied due to parameter uncertainties in stochastic models. A numerical case study presents valuable insights into the price of uncertainty and shows that it can be large.     

Towards improved port capacity investment decisions under uncertainty: a real options approach

ABSTRACT

Port activity plays an important role in facilitating international trade. Sufficient capacity is indispensable for a port to attract flows to a region and retain them. The capacity decision is the result of a trade-off between investment and waiting costs. Traditional methods to value expansion projects do not deal adequately with managerial flexibility in the face of uncertainty from different sources in the complex port environment. In this paper, real options (RO) models are identified as an alternative method to making project valuations and investment decisions, as they attribute the correct value to managerial flexibility under uncertainty. In order to be able to build and use such RO models for port capacity investment decisions, the sources and implications of uncertainty in the port and the different RO model specifications need to be understood. To this end, both the literature about uncertainty in the port context and the literature about real options models are reviewed in order to provide researchers who want to build their own decision-making models, with the necessary knowledge of both fields. The review makes clear that the complex interactions in and competition between the logistics chains and their actors coming together in ports have significant impacts on port capacity. Uncertainty is also caused by uncertain international trade flows and changes in legislation following new technologies and environmental impacts. An analysis of the components of some general RO models shows how the options of flexible output, investment size and timing are valued by RO models in a setting with demand uncertainty. Moreover, the review presents researchers with insights in how to deal with cooperative and competitive interactions in the chain, time to build, cyclical markets and legislation changes. It also shows how to value the expansion and the phased investment options. The new insights resulting from this review are subsequently combined in a framework that serves as a guideline to build RO models for port capacity investments. Finally, an exemplifying application of the framework is used to build an actual port capacity investment decision model.     

Airport management: a strategic approach

In this paper a Dynamic Balanced Scorecard (DBSC) is used for the main purpose of indicating strategy implementation avenues to managers so as to equip them with more efficient decision-making tools. To that end, Fuzzy Multicriteria Decision-Making methodology is used as a source of technical support in formulating a cause and effect system and fuzzy strategic indicators. This methodological instrument brings a strategic vision to performance analysis and is designed to furnish a tool for evaluating the impacts of management action on the BSC fuzzy indicators. The proposed analytical methodology is applied to Brazil’s seven main international airports.     

Fleeing from Hurricane Irma: Empirical Analysis of Evacuation Behavior Using Discrete Choice Theory

This paper analyzes the observed decision-making behavior of a sample of individuals impacted by Hurricane Irma in 2017 (n = 645) by applying advanced methods based in discrete choice theory. Our first contribution is identifying population segments with distinct behavior by constructing a latent class choice model for the choice whether to evacuate or not. We find two latent segments distinguished by demographics and risk perception that tend to be either evacuation-keen or evacuation-reluctant and respond differently to mandatory evacuation orders.Evacuees subsequently face a multi-dimensional choice composed of concurrent decisions of their departure day, departure time of day, destination, shelter type, transportation mode, and route. While these concurrent decisions are often analyzed in isolation, our second contribution is the development of a portfolio choice model (PCM), which captures decision-dimensional dependency (if present) without requiring choices to be correlated or sequential. A PCM reframes the choice set as a bundle of concurrent decision dimensions, allowing for flexible and simple parameter estimation. Estimated models reveal subtle yet intuitive relations, creating new policy implications based on dimensional variables, secondary interactions, demographics, and risk-perception variables. For example, we find joint preferences for early-nighttime evacuations (i.e., evacuations more than three days before landfall and between 6:00 pm and 5:59 am) and early-highway evacuations (i.e., evacuations more than three days before landfall and on a route composed of at least 50% highways). These results indicate that transportation agencies should have the capabilities and resources to manage significant nighttime traffic along highways well before hurricane landfall.     

A standalone-cost costing methodology for a multiservice transit firm

Every multiservice transit firm faces the problem of determining the share of the firm's costs to be borne by each service. A standalone-cost costing methodology for determining such cost shares is proposed. This costing methodology may also be used to investigate the cost efficiency or inefficiency of a multiservice transit firm. The applicability of the methodology is demonstrated in applying it to a multiservice public transit firm, the Tidewater Transportation District Commission, by estimating standalone costs using a statistical cost function for the organization. In addition to multiservice transit firms, the methodology may also be applied to any type of multiservice transportation firm.     

Why do you care what other people think? A qualitative investigation of social influence and telecommuting

The effect of social interactions on decision-making is a topic of current interest in the travel behavior literature. These interactions have been investigated primarily from an intra-household perspective, but increasingly too in other types of social settings. In the case of interactions within a workplace, it has been suggested that the decision to telecommute may have some important social components. Previous research has concentrated on social isolation, and the effect on job satisfaction of qualitatively different (i.e., telecommunications-mediated) relationships with managers and colleagues. A topic that remains unexplored is the way social norms, in effect the influence of other people’s behavior, may influence the decision to adopt telecommuting. In this paper we set to investigate, within a qualitative framework, the role of social contact in the process of acquiring information on, and making decisions about, telecommuting. The results indicate that social contact does play a subtle but non-trivial role in the adoption and continuation process, and offer some insights about the importance of the social dimension, institutional set-up, and how they interact to influence the decision to telecommute.