Are we ready to embrace connected and self-driving vehicles? A case study of Texans

While connected, highly automated, and autonomous vehicles (CAVs) will eventually hit the roads, their success and market penetration rates depend largely on public opinions regarding benefits, concerns, and adoption of these technologies. Additionally, the introduction of these technologies is accompanied by uncertainties in their effects on the carsharing market and land use patterns, and raises the need for tolling policies to appease the travel demand induced due to the increased convenience. To these ends, this study surveyed 1088 respondents across Texas to understand their opinions about smart vehicle technologies and related decisions. The key summary statistics indicate that Texans are willing to pay (WTP) $2910, $4607, $7589, and $127 for Level 2, Level 3, and Level 4 automation and connectivity, respectively, on average. Moreover, affordability and equipment failure are Texans’ top two concerns regarding AVs. This study also estimates interval regression and ordered probit models to understand the multivariate correlation between explanatory variables, such as demographics, built-environment attributes, travel patterns, and crash histories, and response variables, including willingness to pay for CAV technologies, adoption rates of shared AVs at different pricing points, home location shift decisions, adoption timing of automation technologies, and opinions about various tolling policies. The practically significant relationships indicate that more experienced licensed drivers and older people associate lower WTP values with all new vehicle technologies. Such parameter estimates help not only in forecasting long-term adoption of CAV technologies, but also help transportation planners in understanding the characteristics of regions with high or low future-year CAV adoption levels, and subsequently, develop smart strategies in respective regions.     

Selatm — a GIS based program for evaluating the safety benefits of local area traffic management schemes

Particular safety problems relate to traffic on local streets. Local Area Traffic Management (LATM) schemes are often implemented with the objective of counteracting these safety problems. One analytical difficulty in appraising the effectiveness of LATM in dealing with safety problems has been the ‘footloose’ nature of accident locations in a local street network. Seldom are there distinct ‘blackspot’ locations. An area‐wide approach is needed and the interaction between the system and arterial road network must be considered. The paper describes the development of a Safety Evaluation Method for Local Area Traffic Management (termed SELATM). It is a GIS‐based program for analysing accident patterns over time and the evaluation of the safety benefits of LATM schemes. The evaluation is perform at different network levels for various accident variables. The thrust of the program involved the integration of network data with data on accidents and the installed devices to generate summary accident statistics for the various network levels allowing for before and after comparison with a control area. This program as developed is applied to a LATM scheme at Enfield, a suburb in metropolitan Adelaide.     

Do new sources of traffic data make the application of Chaos Theory to traffic management a realistic possibility?

Current signal systems for managing road traffic in many urban areas around the world lack a coordinated approach to detecting the spatial and temporal evolution of congestion across control regions within city networks. This severely inhibits these systems’ ability to detect reliably, on a strategic level, the onset of congestion and implement effective preventative action. As traffic is a time-dependent and non-linear system, Chaos Theory is a prime candidate for application to Urban Traffic Control (UTC) to improve congestion and pollution management. Previous applications have been restricted to relatively uncomplicated motorway and inter-urban networks, arguably where the associated problems of congestion and vehicle emissions are less severe, due to a general unavailability of high-resolution temporal and spatial data that preserve the variability in short-term traffic patterns required for Chaos Theory to work to its full potential. This paper argues that this restriction can now be overcome due to the emergence of new sources of high-resolution data and large data storage capabilities. Consequently, this opens up the real possibility for a new generation of UTC systems that are better able to detect the dynamic states of traffic and therefore more effectively prevent the onset of traffic congestion in urban areas worldwide.     

Environmental traffic management — The end of the road?

This paper questions some aspects of the technical soundness and public acceptability of environmental traffic management scheme of the kind advocated in the Buchanan report, Traffic in Towns. Practical studies have shown that in inner city areas in particular, and perhaps older built-up areas in general, the concept cannot be adequately defended against a wealth of variety of criticism from those whom it most directly affects, i.e. the public. Participation exercises have revealed public fears that the road closures associated with schemes will ruin the viability of local shops, worsen the environmental conditions along local roads chosen as distributors, cause even greater congestion on the main road network due to displaced traffic, and impede the accessibility of local people to their homes. In the light of these, it is suggested a flexible policy be adopted incorporating changes to the forms of vehicles and the manner in which they are used as well as changes to the physical form of the road network.The opinions expressed in this paper do not necessarily reflect those of the organisations to which the authors are attached.     

How to assess sustainability of suppliers in volume discount context? A new data envelopment analysis approach

In this paper, we reformulate conventional data envelopment analysis (DEA) models and propose a novel method for evaluating sustainability of suppliers in the presence of interval volume discount offers, fuzzy data, and ordinal data. To this end, we convert all data into interval data. To convert fuzzy data into interval data, we use nearest weighted interval approximation by applying weighting function and we convert each ordinal data into interval one. Then, using enhanced Russell model, interval efficiencies are obtained. After that, using preference degree approach, we rank suppliers. Finally, a case study is presented to illustrate our proposed approach.     

How will we fund our roads? A case of decreasing revenue from electric vehicles

Annual expenditures for transportation infrastructure have recently surpassed the funding available through tax and fee collection. One large source of revenue generation for transportation infrastructure is use fees that are charged through taxes on gasoline both on a federal and state level. A massive adoption of electric vehicles (EVs) in the United States would result in significantly lower gasoline consumption and thus reduce the revenue collected to maintain the U.S. transportation infrastructure. We investigate how different vehicles will change the annual fee collected on a marginal basis. In addition, we assess the effects of adoption of alternative vehicles on revenues using several projections of alternative vehicles adoption, both on a state-by-state basis and at the national level. We find that baseline midsize and compact vehicles such as the Toyota Camry and Honda Civic generate approximately $2500–$4000 in tax revenue over their lifetime. Under the current funding structure, battery-electric vehicles (BEVs) such as the Nissan Leaf generate substantially less at $400–$1300, while plug-in hybrid electric vehicles (PHEVs) such as the Chevrolet Volt generate $1500–$2700. Even in states with high lifetime fees due to fuel taxes, such as California, revenue generation can be upwards of 50% lower than in states with high registration fees such as Colorado. Total annual revenue generation decreases by about $200 million by 2025 as a result of EV adoption in our base case, but in projections with larger adoption of alternative vehicles could lead to revenue generation reductions as large as $900 million by 2025. Potential schemes that charge user fees on alternative fuel vehicles to overcome the decrease in revenue include a flat annual registration fee at 0.6% of the vehicle’s manufacturer suggested retail price (MSRP) or 2

per mile fee.     

Longer and heavier vehicles in Belgium: A threat for the intermodal sector?

To achieve transport cost reductions and to reduce the environmental impact of road transport, different European countries are allowing or testing longer and heavier vehicles on their road network. In Belgium, the Flanders region started a trial in 2015 allowing a limited number of longer and heavier vehicles on a selection of approved routes. A concern among intermodal operators is however that an allowance of longer and heavier vehicles could trigger a reverse modal shift away from rail and inland waterways container transport. Starting from experiences in other European countries, this paper discusses the potential spatial impact of allowing longer and heavier vehicles on the market areas of intermodal transhipment terminals using a geographic information systems-based location analysis model. In a second step, external transport costs are incorporated in this model, to quantify the spatially diversified societal costs of a potential reverse modal shift.     

Service design for public transportation to address the issue of females’ fear of crime

Transportation - In conjunction with their gender, how does the current design of public transport services affect female passengers’ feelings of safety and fear when using the service? This...     

How wide should be the adjacent area to an urban motorway to prevent potential health impacts from traffic emissions?

In recent years, several studies show that people who live, work or attend school near the main roadways have an increased incidence and severity of health problems that may be related with traffic emissions of air pollutants. The concentrations of near-road atmospheric pollutants vary depending on traffic patterns, environmental conditions, topography and the presence of roadside structures. In this study, the vertical and horizontal variation of nitrogen dioxide (NO₂) and benzene (C₆H₆) concentration along a major city ring motorway were analysed. The main goal of this study is to try to establish a distance from this urban motorway considered “safe” concerning the air pollutants human heath limit values and to study the influence of the different forcing factors of the near road air pollutants transport and dispersion. Statistic significant differences (p = 0.001, Kruskal–Wallis test) were observed between sub-domains for NO₂ representing different conditions of traffic emission and pollutants dispersion, but not for C₆H₆ (p = 0.335). Results also suggest significant lower concentrations recorded at 100 m away from roadway than at the roadside for all campaigns (p < 0.016 (NO₂) and p < 0.036 (C₆H₆), Mann–Whitney test). In order to have a “safe” life in homes located near motorways, the outdoor concentrations of NO₂ must not exceed 44–60.0 μg m⁻³ and C₆H₆ must not exceed 1.4–3.3 μg m⁻³. However, at 100 m away from roadway, 81.8% of NO₂ receptors exceed the annual limit value of human health protection (40 μg m⁻³) and at the roadside this value goes up to 95.5%. These findings suggest that the safe distance to an urban motorway roadside should be more at least 100 m. This distance should be further studied before being used as a reference to develop articulated urban mobility and planning policies.     

A model for evaluating the environmental and functional benefits of “innovative” roundabouts

This study looks at the singling out of a multi-parameter criterion for choosing conventional or innovative roundabout layouts, by taking functional, environmental and economic aspects into consideration. The performances of three conventional roundabouts (with different lane number at entries and through the ring), turbo-roundabouts and roundabouts with right-turn bypass lane on all the arms (flower roundabouts) have been compared in terms of vehicle delays and pollutant (carbon dioxide, nitrogen oxides, particle pollution (PM₁₀ and PM_2.5)) emissions. By means of closed-form capacity models and with the help of COPERT IV^© software, several traffic simulations have been carried out, referred to yearly peak flow values Q_max and ranging between 1300 and 3300 veh/h, starting from a typical annual traffic demand curve in urban areas. The estimation of cumulative vehicle delays and annual pollutant emissions, together with construction and maintenance costs has allowed working out overall costs for each roundabout under consideration, depending on the traffic demand. Thus, the proposed model allows finding the most cost-effective geometric solution as to overall costs for a comprehensive case record of traffic values.     

The ‘Four Dimensions of Behaviour’ framework: a tool for characterising behaviours to help design better interventions

This paper sets out the rationale and structure of a tool for assisting policy-makers and practitioners to understand behavioural challenges and open up thinking on the design of effective ‘behaviour change’ interventions. The ‘Four Dimensions of Behaviour’ (4DB) framework is based on the theoretical and empirical research in a range of policy domains including transport and pro-environmental behaviour more generally. The 4DB framework characterises multifaceted behaviours along dimensions of actor, domain, durability and scope. Its application in workshop or structured settings opens up diverse and non-exclusive discussion on designing interventions to match salient behavioural characteristics. The use of the 4DB framework in the transport domain is demonstrated for travel behaviours of interest to policy-makers using examples of buying plug-in vehicles (PiVs), commuting by bicycle, eco-driving and making business trips by train.     

Evaluating the effects of bus design on passenger flow: Is agent-based simulation a feasible approach?

In this paper, we propose an agent-based simulation approach that is capable of simulating the flow of passengers on board buses and at bus stops. The intention is that it will be applied during vehicle development to analyze how vehicle design affects passenger flow, and thus also how it affects system performance such as dwell time. In turn, this could aid the developers in making design decisions early in the development process. Besides introducing the simulation tool itself, the paper explores the realism of the data generated by the tool. A number of passenger flow experiments featuring a full-scale bus mockup and 50 participants were carried out. The setup of these experiments mirrored a number of ‘bus journeys’ (regarding vehicle design, number of passengers boarding/alighting at each stop and so on) that had previously been simulated using the simulation tool. When the data from the simulations were compared with the data from the passenger flow experiments, it could be concluded that the tool is indeed able to generate realistic passenger flows, although with some errors when a large number of passengers board/alight. The simulated dwell times were rationally affected by the tested bus layout aspects. It was concluded that the tool makes it possible to evaluate how variations in bus layouts affect passenger flow, providing data of sufficiently high quality to be useful in early phases of vehicle design.     

Consumers’ willingness to pay for alternative fuel vehicles: A comparative discrete choice analysis between the US and Japan

This paper conducts a comparative discrete choice analysis to estimate consumers’ willingness to pay (WTP) for electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs) on the basis of the same stated preference survey carried out in the US and Japan in 2012. We also carry out a comparative analysis across four US states. We find that on average US consumers are more sensitive to fuel cost reductions and alternative fuel station availability than are Japanese consumers. With regard to the comparative analysis across the four US states, consumers’ WTP for a fuel cost reduction in California is considerably greater than in the other three states. We use the estimates obtained in the discrete choice analysis to examine the EV/PHEV market shares under several scenarios. In a base case scenario with relatively realistic attribute levels, conventional gasoline vehicles still dominate both in the US and Japan. However, in an innovation scenario with a significant purchase price reduction, we observe a high penetration of alternative fuel vehicles both in the US and Japan. We illustrate the potential use of a discrete choice analysis for forward-looking policy analysis, with the future opportunity to compare its predictions against actual revealed choices. In this case, increased purchase price subsidies are likely to have a significant impact on the market shares of alternative fuel vehicles.     

How do people respond to congestion mitigation policies? A multivariate probit model of the individual consideration of three travel-related strategy bundles

This study explores the relationships between adoption and consideration of three travel-related strategy bundles (travel maintaining/increasing, travel reducing, and major location/lifestyle change), linking them to a variety of explanatory variables. The data for this study are the responses to a fourteen-page survey returned by nearly 1,300 commuting workers living in three distinct San Francisco Bay area neighborhoods in May 1998. We first identified patterns of adoption and consideration among the bundles, using pairwise correlation tests. The test results indicate that those who have adopted coping strategies continue to seek for improvements across the spectrum of generalized cost, but perhaps most often repeating the consideration of a previously-adopted bundle. Furthermore, we developed a multivariate probit model for individuals’ simultaneous consideration of the three bundles. It is found that in addition to the previous adoption of the bundles, qualitative and quantitative Mobility-related variables, Travel Attitudes, Personality, Lifestyle, Travel Liking, and Sociodemographics significantly affect individual consideration of the strategy bundles. Overall, the results of this study give policy makers and planners insight into understanding the dynamic nature of individuals’ responses to travel-related strategies, as well as differences between the responses to congestion that are assumed by policy makers and those that are actually adopted by individuals.

How do local actions affect VMT? A critical review of the empirical evidence

In this paper, we present a discussion of the challenges for research on the topic of vehicle miles traveled. We then summarize and critique evidence from the US on the association between 14 distinct factors and vehicle miles traveled. Our results quantify how much vehicle miles traveled can be expected to change in response to changes in policy or land use factors, including residential density and land use mix, as well as specific transport policies and programs such as transit improvements, road pricing, and programs aimed at changing people’s travel choices. Overall, though individual studies differ as to exact effect sizes, it is clear that local-level policymakers can take actions that are likely to affect vehicle miles traveled. However, we highlight gaps in the knowledge base at a time when decision makers at the local level are being increasingly called upon to take action to reduce vehicle miles traveled. Variation in effect size based on local context or interaction with related policies and programs has been left largely unexplored. In addition, experimental research designs that can identify causal direction are rare, and appropriate data that quantifies vehicle miles traveled are often lacking.     

How flexible is flexible? Accounting for the effect of rescheduling possibilities in choice of departure time for work trips

In departure time studies it is crucial to ascertain whether or not individuals are flexible in their choices. Previous studies have found that individuals with flexible work times have a lower value of time for late arrivals. Flexibility is usually measured in terms of flexible work start time or in terms of constraints in arrival time at work. Although used for the same purpose, these two questions can convey different types of information. Moreover, constraints in departure time are often related not only to the main work activity, but to all daily activities. The objective of this paper is to investigate the effect of constraints in work and in other daily trips/activities on the willingness to shift departure time and the willingness to pay for reducing travel time and travel delay. We set up a survey to collect detailed data on the full 24-hour out-of-home activities and on the constraints for each of these activities. We then built a stated preference experiment to infer preferences on departure time choice, and estimated a mixed logit model, based on the scheduling model, to account for the effects of daily activity schedules and their constraints. Our results show that measuring flexibility in terms of work start time or constraints at work does not provide exactly the same information. Since one-third of the workers with flexible working hours in the survey indicated that they have restrictions on late work-arrival times, their willingness to pay will be overestimated (almost doubled) if flexibility information is asked only in terms of fixed/flexible working hours. This clearly leads to different conclusion in terms of demand sensitivity to reschedule to a later departure time. We also found that having other activities and constraints during the day increases the individuals’ willingness to pay to avoid being late at work, where the presence of constraints on daily activities other than work is particularly relevant for individuals with no constraints at work. The important impact of these findings is that if we neglect the presence of constraints, as is common practise in transport models, it will generally lead to biased value-of-time estimates. Results clearly show that the shift in the departure time, especially towards a late departure time, is strongly overestimated (the predicted shift is more than double) when the effect of non-work activities and their constraints is not accounted for.     

Would being driven by others affect the value of travel time? Ridehailing as an analogy for automated vehicles

Transportation - It is widely believed that vehicle automation will change how travelers perceive the value of travel time (VoTT), but the magnitude of this effect is still unknown. This study...     

What is the market potential of plug-in electric vehicles as commercial passenger cars? A case study from Germany

Commercial passenger cars are a possible early market segment for plug-in electric vehicles (PEVs). Compared to privately owned vehicles, the commercial vehicle segment is characterized by higher mileage and a higher share of vehicle sales in Germany. To this point, there are only few studies which analyze the commercial passenger car sector and arrive at contradictory results due to insufficient driving profile data with an observation period of only one day. Here, we calculate the market potential of PEVs for the German commercial passenger car sector by determining the technical and economical potential for PEVs in 2020 from multi-day driving profiles. We find that commercial vehicles are better suited for PEVs than private ones since they show higher average annual mileage and drive more regularly. About 87% of the analyzed three-week vehicle profiles can technically be fulfilled by battery electric vehicles (BEVs) with an electric driving range of about 110 km while plug-in hybrid electric vehicles (PHEVs) with an electric range of 40 km could obtain an electric driving share of 60% on average. In moderate energy price scenarios, PEVs can reach a market share of 2–4% in the German commercial passenger car sales by 2020 and especially the large commercial branches (Trade, Manufacturing, Administrative services and Other services) are important. However, our analysis shows a high sensitivity of results to energy and battery prices as well as electric consumptions.