Consistent formulation of network equilibrium with stochastic flows

Traffic flows in real-life transportation systems vary on a daily basis. According to traffic flow theory, such variability should induce a similar variability in travel times, but this “internal consistency” is generally not captured by existing network equilibrium models. We present an internally-consistent network equilibrium approach, which considers two potential sources of flow variability: (i) daily variation in route choice and (ii) daily variation in origin–destination demand. We particularly aspire to a flexible formulation that permits alternative statistical assumptions, which allows the best fit to be made to observed variability data in particular applications. Joint probability distributions of route—and therefore link—flows are derived under several assumptions concerning stochastic driver behavior. A stochastic network equilibrium model with stochastic demands and route choices is formulated as a fixed point problem. We explore limiting cases which allow an equivalent convex optimization problem to be defined, and finally apply this method to a real-life network of Kanazawa City, Japan.     

Evaluating the benefits of a combined route guidance and road pricing system in a traffic network with recurrent congestion

When drivers do not have complete information on road travel time and thus choose their routes in a stochastic manner or based on their previous experience, separate implementations of either route guidance or road pricing cannot drive a stochastic network flow pattern towards a system optimum in a Wardropian sense. It is thus of interest to consider a combined route guidance and road pricing system. A road guidance system could reduce drivers' uncertainty of travel time through provision of traffic information. A driver who is equipped with a guidance system could be assumed to receive complete information, and hence be able to find the minimum travel time routes in a user-optimal manner, while marginal-cost road pricing could drive a user-optimal flow pattern toward a system optimum. Therefore, a joint implementation of route guidance and road pricing in a network with recurrent congestion could drive a stochastic network flow pattern towards a system optimum, and thus achieve a higher reduction in system travel time. In this paper the interaction between route guidance and road pricing is modeled and the potential benefit of their joint implementation is evaluated based on a mixed equilibrium traffic assignment model. The private and system benefits under marginal-cost pricing and varied levels of market penetration of the information systems are investigated with a small and a large example. It is concluded that the two technologies complement each other and that their joint implementation can reduce travel time more efficiently in a network with recurrent congestion.     

Finding time‐robust fuel‐efficient paths for a call‐taxi in a stochastic city road network

Intra‐city commuting is being revolutionized by call‐taxi services in many developing countries such as India. A customer requests a taxi via phone, and it arrives at the right time and at the right location for the pick‐up. This mode of intra‐city travel has become one of the most reliable and convenient modes of transportation for customers traveling for business and non‐business purposes. The increased number of vehicles on city roads and raising fuel costs has prompted a new type of transportation logistics problem of finding a fuel‐efficient and quickest path for a call‐taxi through a city road network, where the travel times are stochastic. The stochastic travel time of the road network is induced by obstacles such as the traffic signals and intersections. The delay and additional fuel consumption at each of these obstacles are calculated that are later imputed to the total travel time and fuel consumption of a path. A Monte‐Carlo simulation‐based approach is proposed to identify unique fuel‐efficient paths between two locations in a city road network where each obstacle has a delay distribution. A multi‐criteria score is then assigned to each unique path based on the probability that the path is fuel efficient, the average travel time of the path and the coefficient of variation of the travel times of the path. Copyright © 2016 John Wiley & Sons, Ltd.     

A model for assessing the effects of dynamic travel time information via variable message signs

In view of the serious traffic congestion during peak hours in most metropolitan areas around the world and recent improvement of information technology, there is a growing aspiration to alleviate road congestion by applications of electronic information and communication technology. Providing drivers with dynamic travel time information such as estimated journey times on major routes should help drivers to select better routes and guide them to utilise existing expressway network. This can be regarded as one possible strategy for effective traffic management. This paper aims to investigate the effects and benefits of providing dynamic travel time information to drivers via variable message signs at the expressway network. In order to assess the effects of the dynamic driver information system with making use of the variable message signs, a time-dependent traffic assignment model is proposed. A numerical example is used to illustrate the effects of the dynamic travel time information via variable message signs. This revised version was published online in June 2006 with corrections to the Cover Date.     

Adaptive traffic signal control with equilibrium constraints under stochastic demand

This study develops a methodology to model transportation network design with signal settings in the presence of demand uncertainty. It is assumed that the total travel demand consists of commuters and infrequent travellers. The commuter travel demand is deterministic, whereas the demand of infrequent travellers is stochastic. Variations in demand contribute to travel time uncertainty and affect commuters’ route choice behaviour. In this paper, we first introduce an equilibrium flow model that takes account of uncertain demand. A two-stage stochastic program is then proposed to formulate the network signal design under demand uncertainty. The optimal control policy derived under the two-stage stochastic program is able to (1) optimize the steady-state network performance in the long run, and (2) respond to short-term demand variations. In the first stage, a base signal control plan with a buffer against variability is introduced to control the equilibrium flow pattern and the resulting steady-state performance. In the second stage, after realizations of the random demand, recourse decisions of adaptive signal settings are determined to address the occasional demand overflows, so as to avoid transient congestion. The overall objective is to minimize the expected total travel time. To solve the two-stage stochastic program, a concept of service reliability associated with the control buffer is introduced. A reliability-based gradient projection algorithm is then developed. Numerical examples are performed to illustrate the properties of the proposed control method as well as its capability of optimizing steady-state performance while adaptively responding to changing traffic flows. Comparison results show that the proposed method exhibits advantages over the traditional mean-value approach in improving network expected total travel times.     

Multi-scenario optimization approach for assessing the impacts of advanced traffic information under realistic stochastic capacity distributions

In this study, to incorporate realistic discrete stochastic capacity distribution over a large number of sampling days or scenarios (say 30–100 days), we propose a multi-scenario based optimization model with different types of traveler knowledge in an advanced traveler information provision environment. The proposed method categorizes commuters into two classes: (1) those with access to perfect traffic information every day, and (2) those with knowledge of the expected traffic conditions (and related reliability measure) across a large number of different sampling days. Using a gap function framework or describing the mixed user equilibrium under different information availability over a long-term steady state, a nonlinear programming model is formulated to describe the route choice behavior of the perfect information (PI) and expected travel time (ETT) user classes under stochastic day-dependent travel time. Driven by a computationally efficient algorithm suitable for large-scale networks, the model was implemented in a standard optimization solver and an open-source simulation package and further applied to medium-scale networks to examine the effectiveness of dynamic traveler information under realistic stochastic capacity conditions.     

A tensor-based Bayesian probabilistic model for citywide personalized travel time estimation

Urban travel time information is of great importance for many levels of traffic management and operation. This paper develops a tensor-based Bayesian probabilistic model for citywide and personalized travel time estimation, using the large-scale and sparse GPS trajectories generated by taxicabs. Combined with the knowledge learned from historical trajectories, travel times of different drivers on all road segments in some time slots are modeled with a 3-order tensor. This tensor-based modeling approach incorporates both the spatial correlation between different road segments and the person-specific variation between different drivers, as well as the coarse-grain temporal correlation between recent and historical traffic conditions and the fine-grain temporal correlation between different time slots. To account for the variability caused by the intrinsic uncertainties in urban road network, each travel time entry in the built tensor is treated as a variable following a log-normal distribution. With the help of the fully Bayesian treatment, the model achieves automatic hyper-parameter tuning and model complexity controlling, and therefore the problem of over-fitting is prevented even when the used data is large-scale and sparse. The proposed model is applied to a real case study on the citywide road network of Beijing, China, using the large-scale and sparse GPS trajectories collected from over 32,670 taxicabs for a period of two months. Empirical results of extensive experiments demonstrate that the proposed model provides an effective and robust approach for urban travel time estimation and outperforms the considered competing methods.     

Intelligent transportation system based dynamic vehicle routing and scheduling with variable travel times

This paper presents a dynamic vehicle routing and scheduling model that incorporates real time information using variable travel times. Dynamic traffic simulation was used to update travel times. The model was applied to a test road network. Results indicated that the total cost decreased by implementing the dynamic vehicle routing and scheduling model with the real time information based on variable travel times compared with that of the forecast model. As well, in many cases total running times of vehicles were also decreased. Therefore, the dynamic vehicle routing and scheduling model will be beneficial for both carriers in reducing total costs and society at large by alleviating traffic congestion.     

Capturing value of reliability through road pricing in congested traffic under uncertainty

Empirical studies showed that travel time reliability, usually measured by travel time variance, is strongly correlated with travel time itself. Travel time is highly volatile when the demand approaches or exceeds the capacity. Travel time variability is associated with the level of congestion, and could represent additional costs for travelers who prefer punctual arrivals. Although many studies propose to use road pricing as a tool to capture the value of travel time (VOT) savings and to induce better road usage patterns, the role of the value of reliability (VOR) in designing road pricing schemes has rarely been studied. By using road pricing as a tool to spread out the peak demand, traffic management agencies could improve the utility of travelers who prefer punctual arrivals under traffic congestion and stochastic network conditions. Therefore, we could capture the value of travel time reliability using road pricing, which is rarely discussed in the literature. To quantify the value of travel time reliability (or reliability improvement), we need to integrate trip scheduling, endogenous traffic congestion, travel time uncertainty, and pricing strategies in one modeling framework. This paper developed such a model to capture the impact of pricing on various costs components that affect travel choices, and the role of travel time reliability in shaping departure patterns, queuing process, and the choice of optimal pricing. The model also shows the benefits of improving travel time reliability in various ways. Findings from this paper could help to expand the scope of road pricing, and to develop more comprehensive travel demand management schemes.     

Welfare effects of road pricing and traffic information under alternative ownership regimes

This paper models strategic interactions between a road supplier, a provider of traffic information, and road users, with stochastic travel times. Using a game-theoretical analysis of suppliers’ pricing strategies, we assess the social welfare effects of traffic information under various ownership regimes. The results show that the distortive welfare effect of monopolistic information pricing appears relatively small. Collusion of the road operator and information provider yields higher social welfare than independent pricing by two firms. The intuition behind this result resembles that behind the welfare effects of double marginalization, but is not exactly the same, as traffic information is not strictly complementary to road use.     

A computational model for the probit‐based dynamic stochastic user optimal traffic assignment problem

This paper focuses on computational model development for the probit‐based dynamic stochastic user optimal (P‐DSUO) traffic assignment problem. We first examine a general fixed‐point formulation for the P‐DSUO traffic assignment problem, and subsequently propose a computational model that can find an approximated solution of the interest problem. The computational model includes four components: a strategy to determine a set of the prevailing routes between each origin–destination pair, a method to estimate the covariance of perceived travel time for any two prevailing routes, a cell transmission model‐based traffic performance model to calculate the actual route travel time used by the probit‐based dynamic stochastic network loading procedure, and an iterative solution algorithm solving the customized fixed‐point model. The Ishikawa algorithm is proposed to solve the computational model. A comparison study is carried out to investigate the efficiency and accuracy of the proposed algorithm with the method of successive averages. Two numerical examples are used to assess the computational model and the algorithm proposed. Results show that Ishikawa algorithm has better accuracy for smaller network despite requiring longer computational time. Nevertheless, it could not converge for larger network. Copyright © 2010 John Wiley & Sons, Ltd.     

Modeling stochastic perception error in the mean-excess traffic equilibrium model

In this paper, we extend the α-reliable mean-excess traffic equilibrium (METE) model of Chen and Zhou (Transportation Research Part B 44(4), 2010, 493-513) by explicitly modeling the stochastic perception errors within the travelers’ route choice decision processes. In the METE model, each traveler not only considers a travel time budget for ensuring on-time arrival at a confidence level α, but also accounts for the impact of encountering worse travel times in the (1 − α) quantile of the distribution tail. Furthermore, due to the imperfect knowledge of the travel time variability particularly in congested networks without advanced traveler information systems, the travelers’ route choice decisions are based on the perceived travel time distribution rather than the actual travel time distribution. In order to compute the perceived mean-excess travel time, an approximation method based on moment analysis is developed. It involves using the conditional moment generation function to derive the perceived link travel time, the Cornish-Fisher Asymptotic Expansion to estimate the perceived travel time budget, and the Acerbi and Tasche Approximation to estimate the perceived mean-excess travel time. The proposed stochastic mean-excess traffic equilibrium (SMETE) model is formulated as a variational inequality (VI) problem, and solved by a route-based solution algorithm with the use of the modified alternating direction method. Numerical examples are also provided to illustrate the application of the proposed SMETE model and solution method.     

A dynamic stochastic assignment model for the analysis of general networks

The paper adopts the framework employed by the existing dynamic assignment models, which analyse specific network forms, and develops a methodology for analysing general networks. Traffic conditions within a link are assumed to be homogeneous, and the time varying O-D travel times and traffic flow patterns are calculated using elementary relationships from traffic flow theory and link volume conservation equations. Each individual is assumed to select a departure time and a route by trading off the travel time and schedule delay associated with each alternative. A route is considered as reasonable if it includes only links which do not take the traveller back to the origin. The set of reasonable routes is not consistant but depends on the time that an individual decides to depart from his origin. Equilibrium distributions are derived from a Markovian model which describes the evolution of travel patterns from day to day. Numerical simulation experiments are conducted to analyse the impact of different work start time flexibilities on the time dependent travel patterns. The similarity between link flows and travel times obtained from static and dynamic stochastic assignment is investigated. It is shown that in congested networks the application of static assignment results in travel times which are lower than the ones predicted by dynamic assignment.     

Sensitivity analysis on stochastic equilibrium transportation networks using genetic algorithm

This study deals with the sensitivity analysis of an equilibrium transportation networks using genetic algorithm approach and uses the bi‐level iterative sensitivity algorithm. Therefore, integrated Genetic Algorithm‐TRANSYT and Path Flow Estimator (GATPFE) is developed for signalized road networks for various level of perceived travel time in order to test the sensitivity of perceived travel time error in an urban stochastic road networks. Level of information provided to drivers correspondingly affects the signal timing parameters and hence the Stochastic User Equilibrium (SUE) link flows. When the information on road system is increased, the road users try to avoid conflicting links. Therefore, the stochastic equilibrium assignment concept tends to be user equilibrium. The GATPFE is used to solve the bi‐level problem, where the Area Traffic Control (ATC) is the upper‐level and the SUE assignment is the lower‐level. The GATPFE is tested for six‐junction network taken from literature. The results show that the integrated GATPFE can be applied to carry out sensitivity analysis at the equilibrium network design problems for various level of information and it simultaneously optimize the signal timings (i.e. network common cycle time, signal stage and offsets between junctions).     

Surrogate‐based optimization of cordon toll levels in congested traffic networks

The benefit, in terms of social surplus, from introducing congestion charging schemes in urban networks is depending on the design of the charging scheme. The literature on optimal design of congestion pricing schemes is to a large extent based on static traffic assignment, which is known for its deficiency in correctly predict travel times in networks with severe congestion. Dynamic traffic assignment can better predict travel times in a road network, but are more computational expensive. Thus, previously developed methods for the static case cannot be applied straightforward. Surrogate‐based optimization is commonly used for optimization problems with expensive‐to‐evaluate objective functions. In this paper, we evaluate the performance of a surrogate‐based optimization method, when the number of pricing schemes, which we can afford to evaluate (because of the computational time), are limited to between 20 and 40. A static traffic assignment model of Stockholm is used for evaluating a large number of different configurations of the surrogate‐based optimization method. Final evaluation is performed with the dynamic traffic assignment tool VisumDUE, coupled with the demand model Regent, for a Stockholm network including 1240 demand zones and 17 000 links. Our results show that the surrogate‐based optimization method can indeed be used for designing a congestion charging scheme, which return a high social surplus. Copyright © 2016 John Wiley & Sons, Ltd.     

First-best marginal cost toll for a traffic network with stochastic demand

First-best marginal cost pricing (MCP) in traffic networks has been extensively studied with the assumption of deterministic travel demand. However, this assumption may not be realistic as a transportation network is exposed to various uncertainties. This paper investigates MCP in a traffic network under stochastic travel demand. Cases of both fixed and elastic demand are considered. In the fixed demand case, travel demand is represented as a random variable, whereas in the elastic demand case, a pre-specified random variable is introduced into the demand function. The paper also considers a set of assumptions of traveler behavior. In the first case, it is assumed that the traveler considers only the mean travel time in the route choice decision (risk-neutral behavior), and in the second, both the mean and the variance of travel time are introduced into the route choice model (risk-averse behavior). A closed-form formulation of the true marginal cost toll for the stochastic network (SN-MCP) is derived from the variational inequality conditions of the system optimum and user equilibrium assignments. The key finding is that the calculation of the SN-MCP model cannot be made by simply substituting related terms in the original MCP model by their expected values. The paper provides a general function of SN-MCP and derives the closed-form SN-MCP formulation for specific cases with lognormal and normal stochastic travel demand. Four numerical examples are explored to compare network performance under the SN-MCP and other toll regimes.     

Modelling rain effects on risk‐taking behaviours of multi‐user classes in road networks with uncertainty

This paper proposes a new travel time reliability‐based traffic assignment model to investigate the rain effects on risk‐taking behaviours of different road users in networks with day‐to‐day demand fluctuations and variations in travel time. A generalized link travel time function is used to capture the rain effects on vehicle travel times and road conditions. This function is further incorporated into daily demand variations to investigate those travel time variations arising from demand uncertainty and rain condition. In view of these rain effects, road users' perception errors on travel times and risk‐taking behaviours on path choices are incorporated in the proposed model with the use of a logit‐based stochastic user equilibrium framework. This new model is formulated as a variational inequality problem in terms of path flows. A numerical example is used to illustrate the application of the proposed model for assessment of the rain effects on road networks with uncertainty.     

Development and evaluation of a hybrid travel time forecasting model

The purpose of this paper is to develop and evaluate a hybrid travel time forecasting model with geographic information systems (GIS) technologies for predicting link travel times in congested road networks. In a separate study by You and Kim (cf. You, J., Kim, T.J., 1999b. In: Proceedings of the Third Bi-Annual Conference of the Eastern Asia Society for Transportation Studies, 14–17 September, Taipei, Taiwan), a non-parametric regression model has been developed as a core forecasting algorithm to reduce computation time and increase forecasting accuracy. Using the core forecasting algorithm, a prototype hybrid forecasting model has been developed and tested by deploying GIS technologies in the following areas: (1) storing, retrieving, and displaying traffic data to assist in the forecasting procedures, (2) building road network data, and (3) integrating historical databases and road network data. This study shows that adopting GIS technologies in link travel time forecasting is efficient for achieving two goals: (1) reducing computational delay and (2) increasing forecasting accuracy.     

Multimodal,multiclass stochastic dynamic traffic assignment for evaluating information provision strategies

A multimodal, multiclass stochastic dynamic traffic assignment model was developed to evaluate pre‐trip and enroute travel information provision strategies. Three different information strategies were examined: user optimum [UO], system optimum [SO] and mixed optimum [MO]. These information provision strategies were analyzed based on the levels of traffic congestion and market penetration rate for the information equipment. Only two modes, bus and car, were used for evaluating and calculating the modal split ratio. Several scenarios were analyzed using day‐to‐day and within day dynamic models. From the results analyzed, it was found that when a traffic manager provides information for drivers using the UO strategy and drivers follow the provided information absolutely, the total travel time may increases over the case with no information. Such worsening occurs when drivers switch their routes and face traffic congestion on the alternative route. This phenomenon is the 'Braess Paradox'.     

Modeling the time to the next primary and secondary incident: A semi-Markov stochastic process approach

Incidents are notorious for their delays to road users. Secondary incidents – i.e., incidents that occur within a certain temporal and spatial distance from the first/primary incident – can further complicate clearance and add to delays. While there are numerous studies on the empirical analysis of incident data, to the best of our knowledge, an analytical model that can be used for primary and secondary incident management planning that explicitly considers both the stochastic as well as the dynamic nature of traffic does not exist. In this paper, we present such a complementary model using a semi-Markov stochastic process approach. The model allows for unprecedented generality in the modeling of stochastics during incidents on freeways. Particularly, we relax the oftentimes restrictive Poisson assumption (in the modeling of vehicle arrivals, vehicle travel times, and incidence occurrence and recovery times) and explicitly model secondary incidents. Numerical case studies are provided to illustrate the proposed model.