The effects on birds of human encroachment on the Qinghai–Tibet Plateau

We used alert distance and flight initiation distance to evaluate the effects of the Qinghai–Tibet Railway and Highway on snowfinches’ responses to human encroachment. Road effect was divided into those associated with villages as high disturbance, area between Qinghai–Tibet Railway and Qinghai–Tibet Highway as medium and other areas away from roads as low. The result showed that the alert distance and flight initiation distance of snowfinches decreased significantly with increasing road effects, which indicated the Qinghai–Tibet Railway and Highway significantly affected the bird’s vigilance behavior.     

Avoidance distance from Qinghai–Tibet Highway in sympatric Tibetan antelope and gazelle

We compare the avoidance distances from Qinghai–Tibet Highway between two sympatric ungulate species, Tibetan antelope and Tibetan gazelle, in June and August of 2010 and July and August of 2011. The results show that Tibetan antelope avoid the road significantly more than Tibetan gazelle. At the times of day when traffic volume is high the avoidance distance in both species unexpectedly decreases. This suggests they are relatively undisturbed by the traffic but that they have a diurnal rhythm that involves resting far from the road in night.     

高速公路取弃土场与施工便道生态修复研究

高速公路的取、弃土场及施工便道如不采取有效措施加以修复,极易引起水土流失等生态破坏,文章通过总结实例研究,探讨了高速公路取、弃土场与施工便道将工程措施和植物措施相结合的生态修复技术与施工方案,对高速公路取、弃土场及施工便道的生态修复具有一定的技术指导作用。     

浅析沥青路面性能衰减规律

文章通过对重庆成渝高速公路某段运行后的车流量及路面性能状况进行调查,分析其路面病害状况及产生的原因,研究其路面衰减的规律,并针对各个阶段的路面性能,制定出适宜的养护方案。     

Effects of intersection field of view on emergent collision avoidance performance at unsignalized intersections: analysis based on driving simulator experiments

Proper intersection sight distance can effectively lower the possibility of intersection accidents. American Association of State Highway and Transportation Officials (2011) provide a series of recommended dimensions of intersection sight triangles for uncontrolled and stop/yield‐controlled intersections. However, in reality, although the actual intersection design for unsignalized intersections satisfies the requirements of sight distance and clear sight triangle in American Association of State Highway and Transportation Officials' guideline, there are still a large number of crashes occurring at unsignalized intersections for drivers running stop/yield signs or failing to slow down. This paper presents a driving simulator study on pre‐crash at intersections under three intersection field of view (IFOV) conditions. The aim was to explore whether better IFOVs at unsignalized intersections improve their emergent collision avoidance performance under an assumption of valid intersection sight distance design. The experimental results show drivers' ability to identify potential hazards to be significantly affected by their IFOVs. As drivers' IFOV improved, drivers were more likely to choose braking actions to avoid collisions. Better IFOVs were also associated with significant increases in brake time to intersection and significant reductions in deceleration rate and crash rate, thus leading to a lower risk of traffic crash involvement. The results indicate that providing a better IFOV for drivers at intersections should be encouraged in practical applications in order to improve drivers' crash avoidance capabilities. Copyright © 2016 John Wiley & Sons, Ltd.     

Model for the capacity of the urban signal intersection with work zone

Work zones exist widely on urban arterials in the cities that are undergoing road construction or maintenance. However, the existing studies on arterial work zones are very limited, especially on the work zones at urban intersections, although they have a severe negative impact on the urban traffic system. For the first time, this study focuses on how work zones reduce intersection capacity. A type of widely observed work zone, the straddling work zone that straddles on a road segment and an intersection, is studied. A linear regression model and a multiplicative model suggested by Highway Capacity Manual are proposed respectively to determine the saturation flow rate of the signal intersection with the straddling work zone. The data of 22 straddling work zones are collected and used to evaluate the performances of the proposed models. The results display that the linear regression model outperforms the multiplicative model suggested by Highway Capacity Manual. The study also reveals that reducing approach (or exit) lanes and the mixture of motor vehicles and non‐motor vehicles (and pedestrians) can significantly decrease the capacity of the intersection with straddling work zone. Therefore, in setting a straddling work zone, workers should try to ensure that the intersection approach and exit are unobstructed and set a separation for non‐motors and pedestrians to avoid mixed traffic flow. Copyright © 2016 John Wiley & Sons, Ltd.     

Effect of road width and traffic volume on vehicular interactions in heterogeneous traffic

Highway traffic flow phenomena involve several complex and stochastic variables with high interdependencies. The variations in roadway, traffic and environmental factors influence the traffic flow quality significantly. Capacity analysis of road sections under different traffic and geometric conditions need to quantify the vehicles of widely varying characteristics to a common and universally acceptable unit. Passenger car unit (PCU) is the universally adopted unit of traffic volume, keeping the passenger car as the ‘standard vehicle’ with reference to its static and dynamic characteristics; other vehicles are expressed to its equivalent number in terms of PCUs. The studies carried out in this aspect represent the dynamic nature of impedance caused by a vehicle while moving through a traffic stream. The PCU values recommended by the Highway Capacity Manual are widely applied in many countries; however, their applicability is highly under debate because of the variations in prevailing local traffic conditions. There are several factors that influence the PCU values such as traffic, roadway, vehicle, environmental and control conditions, etc. Apart from vehicular characteristics, the other two major factors that influence the PCU of vehicles are the following: (i) road width and (ii) traffic volume. In this study, estimation of PCU values for the different types of vehicles of a highly heterogeneous traffic on 7.5‐ and 11.0‐m‐wide roads, using micro‐simulation technique, has been dealt with. It has been found that the PCU value of a vehicle type varies significantly with variation in road width and traffic volume. The results of the study indicate that the PCU values are significantly influenced by the said two factors. Copyright © 2012 John Wiley & Sons, Ltd.     

Road Pricing models with maintenance cost

According to the Federal Highway Administration of the United States, maintenance expenditure takes up more than 25% of road revenue disbursement and this percentage has been increasing gradually. The reason for the increment in maintenance cost is that there lacks incentives for road users to take this cost component into their driving behavior. That is, different classes of vehicles should be levied different levels of congestion tax due to the different degrees of damage on the highway if a road pricing policy is implemented. This paper intends to incorporate this concept into road pricing literature by introducing two types of vehicles. After the analysis of the problem, we find that different types of vehicles should be charged different tolls. The toll includes not only the travel delay cost of one's own vehicle and the other types of vehicles, but also the marginal maintenance cost that is dependent on the traffic flow. A set of numerical examples is provided to demonstrate the theoretical analyses. The result shows that both the welfare and cost coverage rate will increase when the road pricing mechanism takes the maintenance cost factor into account.     

汶川地区震后沿线公路泥石流灾害调查研究

本文通过对汶川地震震区周围泥石流的发生频度和强度等情况的调查研究,获得了2010到2019年8月,S303线映秀至卧龙公路、G213线映秀至汶川公路在遭遇暴雨诱发泥石流条件下的灾害损毁的第一手资料,总结了汶川震区因暴雨诱发泥石流灾害对公路造成的损毁原因,并根据具体原因提出了相对应的处治措施及建议。     

A framework for the assessment of collaborative en route resource allocation strategies

Airspace Flow Programs (AFPs) assign ground delays to flights in order to limit flow through capacity constrained airspace regions. AFPs have been successful in controlling traffic with reasonable delays, but a new program called the Combined Trajectory Options Program, or CTOP, is being explored to further accommodate projected increases in traffic demand. In CTOP, centrally managed rerouting and user preference inputs are also incorporated into initial en route resource allocations. We investigate four alternative versions of resource allocation within CTOP in this research, under differing assumptions about the degree of random variability in airline flight assignment costs when measured against a simple model based upon the flight specific, but otherwise fixed, ratio of airborne flight time and ground delay unit cost. Two en route resource allocation schemes are based on ordered assignments that are similar to those used currently, and the other two are system-optimal assignment schemes. One of these system-optimal schemes is based on complete preference information, which is ideal but not realistic, and the other is based on partial information that may be feasible to implement but yields less efficient assignments. The main contribution of this research is a methodological framework to evaluate and compare these alternative en route resource allocation schemes, under varying assumptions about the information traffic managers have been provided about the flight operators’ route preferences. The framework allows us to evaluate these various schemes under differing assumptions about how well the traffic managers’ flight cost model captures flight costs. A numerical example demonstrates that a sequential resource allocation scheme – where flights are assigned resources in the order in which preference information is submitted – can be more efficient than a scheme that offers a cost minimizing allocation based on less complete preference information, and may at the same time be perceived as equitable. We also find that assigning resources in the order flights are scheduled results in less efficient allocations, but more equitable ones.     

公路养护管理发展探讨

公路的养护管理是延长公路使用寿命,保证交通运行顺畅的重要管理手段。本文主要针对当前公路使用过程中出现的主要病害,结合节能环保的时代主题,针对公路的主要病害分析公路养护过程中主要养护技术的开展,以望为提高公路养护管理水平提供一定的参考价值。     

Emissions from auxiliary power units and ground power units during intraday aircraft turnarounds at European airports

It is widely known that emissions from aircraft engines, Auxiliary Power Units (APU) and ground handling equipment contribute to air pollution at airports. During the aircraft turnaround process, the main source of emissions is the APU. The use of the APU can be significantly reduced if the aircraft stand is equipped to supply external electrical power and pre-conditioned air to the cabin. This paper analyses the actual duration of APU and external power usage during intraday aircraft turnarounds at 125 airports during June 2015. The data is derived from flight data recording units of more than 200 short-haul, narrow-body jet aircraft, conducting some 25,195 aircraft turnarounds and thus provides the most detailed assessment of aircraft power usage available. A common practice is for the APU to be running for a short period on arrival at the stand (arrival-cycle) and then again for a short period prior to departure (departure-cycle). It is identified in this study that departure-cycle emissions are three times greater than arrival-cycle emissions. These emissions could be reduced if more accurate forecasts of departure times are available to flight crew. The provision of external ground power is found to reduce emissions by up to 47.6%. However, the study also highlights that when the source of external power is a diesel-fuelled mobile Ground Power Unit (GPU), there is a net doubling in emissions of hydrocarbons. APU usage is also observed to vary with outside air temperature (OAT) leading to possible increases in emissions of up to 6%.     

冷再生技术在公路养护中的应用

2005年国道202线大修改造工程中应用了冷再生技术,取得良好的效果。这一新技术在公路养护、改造工作中充分发挥作用,不仅能节约能源,降低工程造价,提高公路养护质量,而且科学环保。文章介绍了冷再生材料的工程性质和施工控制方法,为类似工程提供参考。     

An application of the directional distance function with the number of accidents as an undesirable output to measure the technical efficiency of state road transport in India

By using the directional distance function (DDF) of data envelopment analysis (DEA), this study measures the technical efficiency of 37 Indian state road transport undertakings (SRTUs) for the year 2012–13. We employ the DDF as a tool for analyzing a joint production function with both desirable and undesirable outputs (i.e., the number of accidents). A comparison between the results with and without accidents shows that several SRTUs have experienced significant changes in their efficiency scores as well as in their rankings after accounting for the undesirable output. This indicates the importance of including the number of accidents – a safety standard – as representative of the undesirable output in computing the efficiency scores of SRTUs. The results of the Tobit model indicate that SRTUs with greater vehicle productivity are more efficient under both conventional DEA and DDF approaches. We also employed zero-truncated negative binomial model to assess the factors influencing the number of road accident experienced by the Indian SRTUs and found that the accident count was significantly influenced by fleet utilization and vehicle productivity.     

Spatial and temporal distribution of expressway and its relationships to land cover and population: A case study of Beijing,China

The interaction between urban transport, land cover change and the distribution of population is a typical manifestation of the urbanization process. As high-grade road, expressway plays a significant role in promoting resource circulation and economic development. Based on the road distribution, land cover and population census data, this study specifically probed the relationship between the expressways and the land cover and population of Beijing. The results show that: (1) as the distance from an expressway increases, the amount of built-up land gradually decreased, and the transfer of land cover near the expressway was more intensive and frequent when compared with that of the whole city; (2) In 2010, a district that was less than 3 km from both sides of the expressway and which occupies one-quarter of the entire city had concentrations of 42% industrial land, 58% of settlement land, and 76% transportation land of the entire city; (3) As for Beijing, the population density was positively correlated to road density, and population density declined with a corresponding increase in buffer distance; (4) The ring area between the Fifth and the Sixth Ring Road featured the greatest density of expressways and the most dramatic changes in both land cover and population. According to our study, there’s a positive interactive feedback relationship between the expressways, land cover and population of Beijing. Also, due to the concentration of population, industry and transport system around the expressways, special attention should be paid to environmental pollution and the inhabitants’ health in this area.     

Preparing highway emissions inventories for urban scale modeling: A case study in Philadelphia

Highway emissions represent a major source of many pollutants. Use of local data to model these emissions can have a large impact on the magnitude and distribution of emissions predicted and can significantly improve the accuracy of local scale air quality modeling assessments. This paper provides a comparison of top–down and bottom–up approaches for developing emission inventories for modeling in one urban area, Philadelphia, in calendar year 1999. A bottom–up approach relies on combining motor vehicle emission factors and vehicle activity data from a travel demand model estimated at the road link level to generate hourly emissions data. This approach can result in better estimates of levels and spatial distribution of on-road motor vehicle emissions than a top–down approach that relies on more aggregated information and default modeling inputs.     

Exploring relationships between driving events identified by in-vehicle data recorders,infrastructure characteristics and road crashes

There is an increasing interest in technology-based solutions that can assist drivers in reducing their risk of involvement in road crashes. Previous studies showed that driving events produced by in-vehicle data recorders (IVDR) are applicable for identification of unsafe driving patterns, while combined examinations of driving events and road infrastructure characteristics are rare. This study explored the relationship between the IVDR-driving events, road characteristics and crashes, to examine a potential of the events for predicting crashes and identification of high-risk locations on the road network. The study database included 3500 segments of the interurban roads in Israel, for which the automatically produced IVDR events were matched with road infrastructure characteristics and crashes. Negative-binomial regression models were adjusted for the relationships between road characteristics and driving events, and subsequently, between events and crashes, given the exposure. Significant impacts were found, yet various event types showed different relations to the infrastructure characteristics and different effects on crashes, on various road types. Better road conditions were associated with a decrease in “braking” events and an increase in the “speed alert” events, where road layout constraints and junction proximity were associated with an opposite effect on events. “Braking” and total events showed better potential for predicting crashes on single-carriageway roads, with a positive link to crashes, where for other road types the “speed alert” events were stronger related to crashes, but with a negative link. The heterogeneity of findings indicates a need in further research of the above relationship, with a particular focus on definitions of driving events produced by the IVDR or other technologies.     

Effects of alternative road pricing systems on network performance

Four road pricing systems, with charges based on cordons crossed, distance travelled, time spent travelling and time spent in congestion, have been tested using the congested assignment network model SATURN and its elastic assignment demand response routine, SATEASY. All tests have been based on a SATURN application of the city of Cambridge, with charges imposed inside an appropriate ring of bypasses. While initial results showed that congestion pricing achieved the greatest increase in average speed in the charged area, later analysis cast doubt on its superiority. Congestion pricing is able to distinguish more effectively the extent to which different types of journey contribute to congestion and achieves given reductions in travel at lower levels of charge. However, it is much less effective in reducing distance travelled and, by encouraging use of minor roads, may achieve far smaller environmental benefits. Time-based pricing performs better than the other systems on most indicators. Generally, the results suggest that when rerouting effects are included in the predictive modelling process the benefits of road pricing may be significantly smaller than previously expected.     

Platooning for sustainable freight transportation: an adoptable practice in the near future?

ABSTRACT

Platooning is an emerging transportation practice that has the potential to solve the problems of the burgeoning transportation industry. A platoon is a group of vehicles, with vehicle to vehicle communication, that travel closely behind one another such that the platoon can accelerate, brake and cruise together. Platoons can improve road safety, be energy efficient and reduce costs. Its complete socio-economic benefits include congestion mitigation, smoother traffic flow, better lane usage and throughput, incentives for green logistics and driver safety. The long-term effect of platooning on road transportation, if extensively deployed, would be better organised traffic flow and efficient tracking of vehicles on the road ushering a multilevel positive impact on the industry. In this study, we attempt to answer the critical question of whether platooning is an adoptable practice in the near future and discuss an agenda to take platooning closer to implementation on the ground by highlighting the opportunities for future research. We also present a conceptual framework to help researchers, academicians, policy makers and practitioners for the adoption of platooning into the transportation industry.     

寒区隧道工程中隔热保温层的作用分析

文章从不同类型冻土的特点出发,结合国道214线鄂拉山公路隧道工程实例,采用理论分析、数值计算等手段对寒区隧道季节冻土、多年冻土和非冻土段隔热保温层的作用进行了分析。