An environmental assessment of air traffic speed constraints in the departure phase of flight: A case study at Gothenburg Landvetter Airport,Sweden

This paper considers the environmental effects of air traffic management speed constraints during the departure phase of flight. We present a CO₂ versus noise trade-off study that compares aircraft departure procedures subject to speed constraints with a free speed scenario. A departure route at Gothenburg Landvetter Airport in Sweden is used as a case study and the analysis is based on airline flight recorded data extracted from the Airbus A321 aircraft. Results suggest that CO₂ emissions could be reduced by 180 kg per flight if all departure speed constraints were removed at a cost of increased noise exposure below 70 dB(A).     

Does the aviation Emission Trading System influence the financial evaluation of new airplanes? An assessment of present values and purchase options

In this paper we assess the impact of the CO₂ costs for short- and long-haul aircraft based on present values and on purchase options. We evaluate purchase options with a framework developed for real option analysis to estimate the value of flexibility under uncertain kerosene and CO₂ prices. We find an average influence of CO₂ costs on present values of €1.1 million for the short haul plane and €4.1 million for the long-haul plane over the typical lifetime of an airplane. For purchase options, we find a CO₂ influence of €0.43 million for the long-haul plane and a moderate impact for the short-haul plane. The results underline the importance of CO₂ and kerosene costs for long-haul aircraft.     

Capitalization of BRT network expansions effects into prices of non-expansion areas

A before and after hedonic model is used to determine the property value impacts on properties already served by the transit system caused by extensions to Bogotá’s bus rapid transit system. Asking prices of residential properties belonging to an intervention area (N = 1407 before, 1570 after) or a control area (N = 267 before, 732 after) and offered for sale between 2001 and 2006 are used to determine capitalization of the enhanced regional access provided by the extension. Properties offered during the year the extension was inaugurated and in subsequent years have asking prices that are between 13% and 14% higher than prices for properties in the control area, after adjusting for structural, neighborhood and regional accessibility characteristics of each property. Furthermore, the appreciation is similar for properties within 500 m and properties between 500 m and 1 km of the BRT.     

On the electrification of road transportation – A review of the environmental,economic, and social performance of electric two-wheelers

Electrification is widely considered as a viable strategy for reducing the oil dependency and environmental impacts of road transportation. In pursuit of this strategy, most attention has been paid to electric cars. However, substantial, yet untapped, potentials could be realized in urban areas through the large-scale introduction of electric two-wheelers. Here, we review the environmental, economic, and social performance of electric two-wheelers, demonstrating that these are generally more energy efficient and less polluting than conventionally-powered motor vehicles. Electric two-wheelers tend to decrease exposure to pollution as their environmental impacts largely result from vehicle production and electricity generation outside of urban areas. Our analysis suggests that the price of e-bikes has been decreasing at a learning rate of 8%. Despite price differentials of 5000 ± 1800 EUR₂₀₁₂ kW h⁻¹ in Europe, e-bikes are penetrating the market because they appear to offer an apparent additional use value relative to bicycles. Mid-size and large electric two-wheelers do not offer such an additional use value compared to their conventional counterparts and constitute niche products at price differentials of 700 ± 360 EUR₂₀₁₂ kW⁻¹ and 160 ± 90 EUR₂₀₁₂ kW⁻¹, respectively. The large-scale adoption of electric two-wheelers can reduce traffic noise and road congestion but may necessitate adaptations of urban infrastructure and safety regulations. A case-specific assessment as part of an integrated urban mobility planning that accounts, e.g., for the local electricity mix, infrastructure characteristics, and mode-shift behavior, should be conducted before drawing conclusions about the sustainability impacts of electric two-wheelers.     

Using supplemental aircraft noise information to assist airport neighbours understand aircraft noise

This paper deals with the value of supplemental aircraft noise information in the form of combining aircraft movement numbers and noise levels to assist airport neighbours in understanding airport noise. To analyse the socio-spatial interaction of annoyance with, and interference by, aircraft noise, an alternative is recommended, namely the number of noise events above selected noise levels so that laypeople can better understand the extent of noise. The research is based on a questionnaire survey of households affected by aircraft noise around OR Tambo International Airport near Johannesburg. The results indicate that levels of annoyance and disturbance across a number of normal household activities are positively related to the number of noise events recorded, irrespective of noise levels above 60 dB.     

How much noise reduction at airports?

Airport noise nuisance is a negative externality especially when it occurring near urban areas. Like all externalities, noise nuisance may be a reason for government intervention. When intervening, governments should set quantitative policy targets with care. In practice, this issue is generally neglected. This line of research sets the first step towards determining optimal policy targets in the case of noise nuisance near airports, more specifically in the case of Amsterdam Airport. We use hedonic pricing to establish the benefits of noise reduction. Furthermore, we develop a bottom-up cost function to analyze the costs of reducing noise for airlines. We then equate marginal costs and benefits to establish the optimal level of noise reduction, which appears to be 3 dB in the case of Amsterdam Airport. Welfare increasing measures include alternative approach procedures, regional substitution of planes within existing fleets and early depreciation of noisy planes increase welfare. Reducing the number of flights has a negative effect on net welfare.     

Estimation of airport noise impacts on public health. A case study of İzmir Adnan Menderes Airport

The air transport industry is showing rapid growth in line with the call for meeting the requirements of a rising population. Noise mapping is more useful than surveys and measurements to estimate the effects of noise on public health. In this paper, noise levels for the day, evening and night time slices around İzmir Adnan Menderes Airport were calculated by use of the SoundPLAN 7.2 software according to the European Noise Directive, and the “ECAC Doc. 29-Interim” method was applied for the computation of the aircraft noise. Air traffic data of year 2012, technical information about the airport and geographical data including the layers of elevation, residential buildings, auxiliary buildings, hospitals and schools were used as the main inputs for the model developed in the study. The model was found to perform well for the areas closer to the airport. The results of the study suggested that the area at the north side of the airport, where the city center of İzmir is located, is more affected than other areas. The threshold value of 55 dB(A) was found to be exceeded in 0.3% of the land area covered by İzmir City center during the time slice “day”. The results showed that about 2% of the resident population was exposed to noise levels of 55 dB(A) or higher during day-time in İzmir. In addition, it was understood that the number of people who are potentially exposed to high noise levels and threatened by several illness such as hypertension and sleep disturbances is significant in the surrounding area of the airport. It is thought to be important for airport operators to manage the airport capacity based on the flight schedules in order to control the noise exposure level around the airport.     

Valuing time and reliability: assessing the evidence from road pricing demonstrations

This paper compares results from evaluations of two recent road pricing demonstrations in southern California. These projects provide particularly useful opportunities for measuring commuters’ values of time and reliability. Unlike most revealed preference studies of value of time, the choice to pay to use the toll facilities in these demonstrations is relatively independent from other travel choices such as whether to use public transit. Unlike most stated preference studies, the scenarios presented in these surveys are real ones that travelers have faced or know about from media coverage. By combining revealed and stated preference data, some of the studies have obtained enough independent variation in variables to disentangle effects of cost, time, and reliability, while still grounding the results in real behavior. Both sets of studies find that the value of time saved on the morning commute is quite high (between $20 and $40 per hour) when based on revealed behavior, and less than half that amount when based on hypothetical behavior. When satisfactorily identified, reliability is also valued quite highly. There is substantial heterogeneity in these values across the population, but it is difficult to isolate its exact origins.     

Fueling for contingencies: The hidden cost of unpredictability in the air transportation system

The aviation community is increasing its attention on the concept of predictability when conducting aviation service quality assessments. Reduced fuel consumption and the related cost is one of the various benefits that could be achieved through improved flight predictability. A lack of predictability may cause airline dispatchers to load more fuel onto aircraft before they depart; the flights would then in turn consume extra fuel just to carry excess fuel loaded. In this study, we employ a large dataset with flight-level fuel loading and consumption information from a major US airline. With these data, we estimate the relationship between the amount of loaded fuel and flight predictability performance using a statistical model. The impact of loaded fuel is translated into fuel consumption and, ultimately, fuel cost and environmental impact for US domestic operations. We find that a one-minute increase in the standard deviation of airborne time leads to a 0.88 min increase in loaded contingency fuel and 1.66 min in loaded contingency and alternate fuel. If there were no unpredictability in the aviation system, captured in our model by eliminating standard deviation in flight time, the reduction in the loaded fuel would between 6.12 and 11.28 min per flight. Given a range of fuel prices, this ultimately would translate into cost savings for US domestic airlines on the order of $120–$452 million per year.     

Fuel price elasticities for single-unit truck operations in the United States

This paper provides fuel price elasticity estimates for single-unit truck activity, where single-unit trucks are defined as vehicles on a single frame with either (1) at least two axles and six tires; or (2) a gross vehicle weight greater than 10,000 lb. Using data from 1980 to 2012, this paper applies first-difference and error correction models and finds that single-unit truck activity is sensitive to certain macroeconomic and infrastructure factors (gross domestic product, lane miles expansion, and housing construction), but is not sensitive to diesel fuel prices. These results suggest that fuel price elasticities of single unit truck activity are inelastic. These results may be used by policymakers in considering policies that have a direct impact on fuel prices, or policies whose effects may be equivalent to fuel price adjustments.     

Effects of battery chemistry and performance on the life cycle greenhouse gas intensity of electric mobility

Lithium traction batteries are a key enabling technology for plug-in electric vehicles (PEVs). Traction battery manufacture contributes to vehicle production emissions, and battery performance can have significant effects on life cycle greenhouse gas (GHG) emissions for PEVs. To assess emissions from PEVs, a life cycle perspective that accounts for vehicle production and operation is needed. However, the contribution of batteries to life cycle emissions hinge on a number of factors that are largely absent from previous analyses, notably the interaction of battery chemistry alternatives and the number of electric vehicle kilometers of travel (e-VKT) delivered by a battery. We compare life cycle GHG emissions from lithium-based traction batteries for vehicles using a probabilistic approach based on 24 hypothetical vehicles modeled on the current US market. We simulate life-cycle emissions for five commercial lithium chemistries. Examining these chemistries leads to estimates of emissions from battery production of 194–494 kg CO₂ equivalent (CO₂e) per kWh of battery capacity. Combined battery production and fuel cycle emissions intensity for plug-in hybrid electric vehicles is 226–386 g CO₂e/e-VKT, and for all-electric vehicles 148–254 g CO₂e/e-VKT. This compares to emissions for vehicle operation alone of 140–244 g CO₂e/e-VKT for grid-charged electric vehicles. Emissions estimates are highly dependent on the emissions intensity of the operating grid, but other upstream factors including material production emissions, and operating conditions including battery cycle life and climate, also affect life cycle GHG performance. Overall, we find battery production is 5–15% of vehicle operation GHG emissions on an e-VKT basis.     

Idling stop fines for exceeding legal idling times – From the driver’s perspective

In order to reduce CO₂ emissions from motorised transport, the Taiwanese government implemented an idling policy for vehicles in 2012. This paper applies a contingent valuation framework based on stated preference questions to calculate a reasonable fine for idling vehicles based on drivers’ preferences in Taiwan. Drivers were surveyed at urban roadsides to determine the amount of money they would prefer to pay for idling in excess of the 3 min currently allowed by law. The results obtained from our spike model analysis showed that drivers would prefer to pay a fine of 1720 NTD (approximately USD 57).     

Costs and benefits of US aviation noise land-use policies

Aircraft noise affects human health and welfare. One method US airports use to mitigate the impact of noise on nearby residents is through sound insulation and residential land acquisition projects. Costs of residential insulation and acquisition projects are taken from federal grant summaries while the benefits of noise reduction are calculated as the combined willingness-to-pay for abatement and direct and indirect costs of illness from hypertension, myocardial infarction, and stroke. We show that the average cost of sound insulation projects is $15,600 per person affected while that of land acquisition is $48,900 per person affected. We find that for only in 15% of projects do the benefits to residents from willingness-to-pay for reduction and reduced risk of mortality and morbidity exceed the costs of sound insulation for residences exposed to 65 dB Day Night Level (DNL) of noise. Our estimates suggest that noise insulation projects are more cost-effective than fleet wide mandatory aircraft retirement.     

Vehicle attribute trade-offs to meet the 2025 CAFE fuel economy target

The literature analyzes changes in vehicle attributes that can improve fuel economy to meet Corporate Average Fuel Economy (CAFE) standards. However, these analyses exclude either vehicle price, size, acceleration or technology advancement. A more comprehensive examination of the trade-offs among these attributes is needed, this case study focuses on technically feasible modifications to a reference 2012 vehicle to meet the 2025 fuel economy target. Scenarios developed to examine uncertainty in technology advancement indicate that expected technology cost reductions over time will be insufficient to offset the costs of additional fuel efficiency technologies that could be used to meet the 2025 fuel economy target while maintaining other vehicle attributes. The mid-price scenario results show the targeted 66% increase in fuel economy from 2012 to 2025 can be achieved with (i) a 10% ($2070) vehicle price increase (lightweight hybrid electric vehicle), (ii) a 31% (2.9 second) increase in the 0–97 km/h (60 mph) acceleration time (smaller engine), or (iii) a 17% (700 L) decrease in interior volume (smaller body) while maintaining other vehicle attributes. These results are consistent with those obtained using methods that generalize the US light-duty vehicle fleet, but are not a forecast of future vehicle attributes because combinations of less perceptible changes to vehicle price, acceleration and size would also be feasible. This study shows there are numerous ways that 2025 fuel economy targets can be met; therefore, the trade-offs quantified provide important insights on the implications of future CAFE standards.     

The cumulative effect of nuisances from road transportation in residential sectors on the Island of Montreal – Identification of the most exposed groups and areas

Air pollution and road traffic noise are considered to be the two most important nuisances that could negatively affect the quality of life. A prolonged exposure to high concentrations of these pollutants could conduct to various health problems. Studies in environmental equity have often considered these nuisances individually whenever it comes from the same source. The main objective of this paper is to determine if the 15 years of age, those aged 65 and over, visible minorities and low income individuals located in a portion of the Island of Montreal are overrepresented in city blocks characterized by having among the highest levels of transportation-related air pollutants (i.e., ambient concentrations of NO₂ and road traffic noise in decibels (dB(A)). The results show that low-income individuals and, to a lesser extent, visible minorities, are significantly overrepresented in city blocks characterized by the higher levels of NO₂ and road traffic noise in dB(A). Multinomial logistic regression analysis confirms these results, and also shows that young people under 15 years are under-represented in the most polluted areas. However, contrary to the previous bivariate results, people aged 65 and over are negatively and significantly associated with the likelihood of their living in a city block located in an advantaged area after controlling for the independent effects of the other explanatory variables. Moreover, visible minorities are significantly overrepresented in advantaged areas. Considering the observed results, some solutions are identified to reduce road traffic noise and air pollution in the city blocks localized near major traffic arteries.     

Green approaches at sea – The benefits of adjusting speed instead of anchoring

In this paper, the concept ‘green approaches’ already used in aviation is applied to cargo transportation at sea. Instead of anchoring outside a port waiting for berth, ships can adjust their speed to arrive just in time for berthing. With improved incentives for reducing speed and shared information about berthing times, green approaches instead of anchoring can be a way to reduce fuel consumption and emissions without increasing the transit times of goods. The present study estimates the benefits to society as a whole for the EU ports in the Baltic Sea with Automatic Identification System data applying a new method using data collected in real time. Data consists of all anchored ships awaiting berth on 40 different occasions in 2015 and are subsequently extrapolated to a year. Fuel consumption by the individual ships, emissions and values are calculated from the detailed data with established models and estimates of unit values. The potential benefits are estimated at 27 million euros per year in the scenario where the near 15,000 anchorings by ships annually awaiting berth may instead start a green approach 12 h prior to arrival and may reduce speed by 25%, using the middle unit values for fuel and emissions. The methodology used in the paper can be applied to estimate the benefits of green approaches in other areas with anchored vessels.     

Regional climate impact of aerosols emitted by transportation modes and potential effects of policies on demand and emissions

The transportation system is one of the main sectors with significant climate impact. In the U.S. it is the second main emitter of carbon dioxide. Its impact in terms of emission of carbon dioxide is well recognized. But a number of aerosol species have a non-negligible impact. The radiative forcing due to these species needs to be quantified. A radiative transfer code is used. Remote sensing data is retrieved to characterize different regions. The radiative forcing efficiency for black carbon are 396 ± 200 W/m²/AOD for the ground mode and 531 ± 190 W/m²/AOD for the air transportation, under clear sky conditions. The radiative forcing due to contrail is 0.14 ± 0.06 W/m² per percent coverage. Based on the forcing from the different species emitted by each mode of transportation, policies may be envisioned. These policies may affect demand and emissions of different modes of transportation. Demand and fleet models are used to quantify these interdependencies. Depending on the fuel price of each mode, mode shifts and overall demand reduction occur, and more fuel efficient vehicles are introduced in the fleet at a faster rate. With the introduction of more fuel efficient vehicles, the effect of fuel price on demand is attenuated. An increase in fuel price of 50 cents per gallon, scaled based on the radiative forcing of each mode, results in up to 5% reduction in emissions and 6% reduction in radiative forcing. With technologies, significant reduction in climate impact may be achieved.     

Guidance for new policy developments on railway noise and vibration

Noise and vibration are two of the main problems associated with railways in residential areas. To ensure quality of life and well-being of inhabitants living in the vicinity of railway paths, it is important to evaluate, understand, control and regulate railway noise and vibration. Much attention has been focused on the impact of noise from railway traffic but the consideration of railway-induced vibration has often been neglected. This paper aims to provide policy guidance based on results obtained from the analyses of relationships estimated from ordinal logit models between human response, railway noise exposure and railway vibration exposure. This was achieved using data from case studies comprised of face-to-face interviews (N = 931), internal vibration measurements (N = 755), and noise calculations (N = 688) collected within the study “Human Response to Vibration in Residential Environments” by the University of Salford, UK. Firstly, the implications of neglecting vibration in railway noise policies are investigated. The findings suggest that it is important to account for railway induced vibrations in future noise and transport policies, as neglecting vibrations results in an underestimation of people highly annoyed by noise. Secondly, implications of neglecting different types of railway sources are presented. It was found that the impact of noise and vibration form maintenance operations should be better understood and should be taken into account when assessing the environmental impact of railways in residential environments. Finally, factors that were found to influence railway vibration annoyance are presented and expressed as weightings. The data shows that factors specific to a particular residential area should also be taken into account in future vibration policies as the literature shows that attitudinal, socio-demographic and situational factors have a large influence on vibration annoyance responses. This work will be of interest to researchers and environmental health practitioners involved in the assessment of vibration complaints, as well as to policy makers, planners and consultants involved in the design of buildings and railways.