Interactive image-based information visualization for aircraft trajectory analysis

Objectives: The objective of the presented work is to present novel methods for big data exploration in the Air Traffic Control (ATC) domain. Data is formed by sets of airplane trajectories, or trails, which in turn records the positions of an aircraft in a given airspace at several time instants, and additional information such as flight height, speed, fuel consumption, and metadata (e.g. flight ID). Analyzing and understanding this time-dependent data poses several non-trivial challenges to information visualization.Materials and methods: To address this Big Data challenge, we present a set of novel methods to analyze aircraft trajectories with interactive image-based information visualization techniques.As a result, we address the scalability challenges in terms of data manipulation and open questions by presenting a set of related visual analysis methods that focus on decision-support in the ATC domain. All methods use image-based techniques, in order to outline the advantages of such techniques in our application context, and illustrated by means of use-cases from the ATC domain.Results: For each considered use-case, we outline the type of questions posed by domain experts, data involved in addressing these questions, and describe the specific image-based techniques we used to address these questions. Further, for each of the proposed techniques, we describe the visual representation and interaction mechanisms that have been used to address the above-mentioned goals. We illustrate these use-cases with real-life datasets from the ATC domain, and show how our techniques can help end-users in the ATC domain discover new insights, and solve problems, involving the presented datasets.     

A traffic assignment model for a ridesharing transportation market

A nascent ridesharing industry is being enabled by new communication technologies and motivated by the many possible benefits, such as reduction in travel cost, pollution, and congestion. Understanding the complex relations between ridesharing and traffic congestion is a critical step in the evaluation of a ridesharing enterprise or of the convenience of regulatory policies or incentives to promote ridesharing. In this work, we propose a new traffic assignment model that explicitly represents ridesharing as a mode of transportation. The objective is to analyze how ridesharing impacts traffic congestion, how people can be motivated to participate in ridesharing, and, conversely, how congestion influences ridesharing, including ridesharing prices and the number of drivers and passengers. This model is built by combining a ridesharing market model with a classic elastic demand Wardrop traffic equilibrium model. Our computational results show that (i) the ridesharing base price influences the congestion level, (ii) within a certain price range, an increase in price may reduce the traffic congestion, and (iii) the utilization of ridesharing increases as the congestion increases. Copyright © 2014 John Wiley & Sons, Ltd.     

Empirical analysis of short period traffic counts and their efficiency: the case of Indian traffic

Short period traffic counts (SPTCs) are conducted routinely to estimate the annual average daily traffic (AADT) at a particular site. This paper uses Indian traffic volume data to methodically and extensively study the effect of four aspects related to the design of SPTCs. These four aspects are: (i) for how long, (ii) on which days should SPTCs be carried out, (iii) how many times, and (iv) on which months should SPTCs be carried out? The analyses indicate that the best durations for conducting SPTCs are 3 days (starting with a Thursday) and 7 days, for total traffic and truck traffic, respectively. Further, these counts should be repeated twice a year keeping a separation of two months between the counts to obtain good estimates of AADT at minimal cost. An additional outcome of this study has been the determination of seasonal factor values for roads in developing economies, like India.     

Integration of signal timing estimation model and dynamic traffic assignment in feedback loops: system design and case study

This paper presents an integrated framework for effective coupling of a signal timing estimation model and dynamic traffic assignment (DTA) in feedback loops. There are many challenges in effectively integrating signal timing tools with DTA software systems, such as data availability, exchange format, and system coupling. In this research, a tight coupling between a DTA model with various queue‐based simulation models and a quick estimation method Excel‐based signal control tool is achieved and tested. The presented framework design offers an automated solution for providing realistic signal timing parameters and intersection movement capacity allocation, especially for future year scenarios. The framework was used to design an open‐source data hub for multi‐resolution modeling in analysis, modeling and simulation applications, in which a typical regional planning model can be quickly converted to microscopic traffic simulation and signal optimization models. The coupling design and feedback loops are first demonstrated on a simple network, and we examine the theoretically important questions on the number of iterations required for reaching stable solutions in feedback loops. As shown in our experiment, the current coupled application becomes stable after about 30 iterations, when the capacity and signal timing parameters can quickly converge, while DTA's route switching model predominately determines and typically requires more iterations to reach a stable condition. A real‐world work zone case study illustrates how this application can be used to assess impacts of road construction or traffic incident events that disrupt normal traffic operations and cause route switching on multiple analysis levels. Copyright © 2014 John Wiley & Sons, Ltd.     

A dual control approach for repeated anticipatory traffic control with estimation of network flow sensitivity

This paper investigates a strategic signal control, which anticipates travelers' route choice response and determines signal timings to optimize network‐wide objectives. In general traffic assignment models are used for anticipating this route choice response. However, model‐reality mismatch usually brings suboptimal solutions to the real system. A repeated anticipatory control resolves the suboptimality and addresses the modeling error by learning from information on model bias. This paper extends the repeated control approach and focuses on the estimation of flow sensitivity as well as its influence on control, which is a crucial issue in implementation of model bias correction. The main objective of this paper is first to analyze the estimation error in the real flow derivative that is estimated from noisy measurements. A dual control method is then presented, improving both optimization objective function and derivative estimation during the control process. The proposed dual algorithm is tested on a simple network as well as on a midsize network. Numerical examples confirm the reliable performance of the new reality‐tracking control strategy and its ability to identify (local) optimal solutions on real traffic networks. Copyright © 2016 John Wiley & Sons, Ltd.     

Personalized real-time traffic information provision: Agent-based optimization model and solution framework

The advancement of information and communication technology allows the use of more sophisticated information provision strategies for real-time congested traffic management in a congested network. This paper proposes an agent-based optimization modeling framework to provide personalized traffic information for heterogeneous travelers. Based on a space–time network, a time-dependent link flow based integer programming model is first formulated to optimize various information strategies, including elements of where and when to provide the information, to whom the information is given, and what alternative route information should be suggested. The analytical model can be solved efficiently using off-the-shelf commercial solvers for small-scale network. A Lagrangian Relaxation-based heuristic solution approach is developed for medium to large networks via the use of a mesoscopic dynamic traffic simulator.     

Induced road traffic in Spanish regions: A dynamic panel data model

Distinguishing between traffic generated exclusively from the expansion of the road network (induced demand) and that resulting from other demand factors is of crucial importance to properly designed transport policies. This paper analyzes and quantifies the induced demand for road transport for Spain’s main regions from 1998 to 2006, years that saw mobility in Spain attain its highest growth rate. The lack of research in this area involving Spain and the key role played by the sector, given its high level of energy consumption and the negative externalities associated with it (accidents, noise, traffic congestion, emissions, etc.), endow greater relevance to this type of research. Based on a Dynamic Panel Data (DPD) reduced-form model, we apply alternative approaches (fixed and random effects and GMM-based methods) for measuring the induced demand. The results obtained provide evidence for the existence of an induced demand for transport in Spain, though said results vary depending on the estimating method employed.     

Evaluation of a model predictive control framework for motorway traffic involving conventional and automated vehicles

A Model Predictive Control (MPC) strategy for motorway traffic management, which takes into account both conventional control measures and control actions executed by vehicles equipped with Vehicle Automation and Communication Systems (VACS), is presented and evaluated using microscopic traffic simulation. A stretch of the motorway A20, which connects Rotterdam to Gouda in the Netherlands, is taken as a realistic test bed. In order to ensure the reliability of the application results, extensive speed and flow measurements, collected from the field, are used to calibrate the site’s microscopic traffic simulation model. The efficiency of the MPC framework, applied to this real sizable and complex network under realistic traffic conditions, is examined for different traffic conditions and different penetration rates of equipped vehicles. The adequacy of the control application when only VACS equipped vehicles are used as actuators, is also considered, and the related findings underline the significance of conventional control measures during a transition period or in case of increased future demand.     

A traffic noise model for road intersections in the city of Cartagena de Indias,Colombia

Road traffic noise models are fundamental tools for designing and implementing appropriate prevention plans to minimize and control noise levels in urban areas. The objective of this study is to develop a traffic noise model to simulate the average equivalent sound pressure level at road intersections based on traffic flow and site characteristics, in the city of Cartagena de Indias (Cartagena), Colombia. Motorcycles are included as an additional vehicle category since they represent more than 30% of the total traffic flow and a distinctive source of noise that needs to be characterized. Noise measurements are collected using a sound level meter Type II. The data analysis leads to the development of noise maps and a general mathematical model for the city of Cartagena, Colombia, which correlates the sound levels as a function of vehicle flow within road intersections. The highest noise levels were 79.7 dB(A) for the road intersection María Auxiliadora during the week (business days) and 77.7 dB(A) for the road intersection India Catalina during weekends (non-business days). Although traffic and noise are naturally related, the intersections with higher vehicle flow did not have the highest noise levels. The roadway noise for these intersections in the city of Cartagena exceeds current limit standards. The roadway noise model is able to satisfactorily predict noise emissions for road intersections in the city of Cartagena, Colombia.     

Stochastic cell transmission model (SCTM): A stochastic dynamic traffic model for traffic state surveillance and assignment

The paper proposes a first-order macroscopic stochastic dynamic traffic model, namely the stochastic cell transmission model (SCTM), to model traffic flow density on freeway segments with stochastic demand and supply. The SCTM consists of five operational modes corresponding to different congestion levels of the freeway segment. Each mode is formulated as a discrete time bilinear stochastic system. A set of probabilistic conditions is proposed to characterize the probability of occurrence of each mode. The overall effect of the five modes is estimated by the joint traffic density which is derived from the theory of finite mixture distribution. The SCTM captures not only the mean and standard deviation (SD) of density of the traffic flow, but also the propagation of SD over time and space. The SCTM is tested with a hypothetical freeway corridor simulation and an empirical study. The simulation results are compared against the means and SDs of traffic densities obtained from the Monte Carlo Simulation (MCS) of the modified cell transmission model (MCTM). An approximately two-miles freeway segment of Interstate 210 West (I-210W) in Los Ageles, Southern California, is chosen for the empirical study. Traffic data is obtained from the Performance Measurement System (PeMS). The stochastic parameters of the SCTM are calibrated against the flow-density empirical data of I-210W. Both the SCTM and the MCS of the MCTM are tested. A discussion of the computational efficiency and the accuracy issues of the two methods is provided based on the empirical results. Both the numerical simulation results and the empirical results confirm that the SCTM is capable of accurately estimating the means and SDs of the freeway densities as compared to the MCS.     

Traffic noise and traffic light control

An optimal control problem of traffic light duration is considered. The traffic noise level is introduced as a state variable in a dynamical optimization problem. A closed loop control system is designed which influences the green duration of the lights according to the equivalent noise level. Real time considerations lead to sub-optimal control implementation. This control policy decreases the noise levels at intensive traffic intersections. The traffic lights adapt their duration according to the noise pollution. Simulation and experimental results are discussed.     

A methodology for identifying similar days in air traffic flow management initiative planning

This article describes a methodology for selecting days that are comparable in terms of the conditions faced during air traffic flow management initiative planning. This methodology includes the use of specific data sources, specific features of calendar days defined using these data sources, and the application of a specific form of classification and then cluster analysis. The application of this methodology will produce results that enable historical analysis of the use of initiatives and evaluation of the relative success of different courses of action. Several challenges are overcome here including the need to identify the appropriate machine learning algorithms to apply, to quantify the differences between calendar days, to select features describing days, to obtain appropriate raw data, and to evaluate results in a meaningful way. These challenges are overcome via a review of relevant literature, the identification and trial of several useful models and data sets, and careful application of methods. For example, the cluster analysis that ultimately selects sets of similar days uses a distance metric based on variable importance measures from a separate classification model of observed initiatives. The methodology defined here is applied to the New York area, although it could be applied by other researchers to other areas.     

A study of the influence of severe environmental conditions on common traffic congestion features

On the basis of real traffic and environmental data measured on German freeways, we studied common features of traffic congestion under the influence of severe weather conditions. We have found that traffic features [J] and [S] defining traffic phases “wide moving jam” (J) and “synchronized flow” (S) in Kerner's three‐phase theory are indeed common spatiotemporal traffic features. The quantitative parameters for both traffic phases [S] and [J] were investigated in a comparison of “ideal” weather conditions (good visibility and no precipitation) and severe weather situations (icy road, wind, precipitation, etc.). We showed spatiotemporal congested patterns in several space–time diagrams based on the Automatic Tracking of Moving Jams/Forecasting of Traffic Objects (ASDA/FOTO) model reconstruction for roadside detectors. A statistical study of traffic phase [J] parameters was presented, showing the average values and standard deviation of the quantities. Similarities and differences were analyzed, and some consequences for vehicular applications were discussed to cope with severe weather conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Integrating a traffic router and microsimulator into a land use and travel demand model

Abstract

This paper describes one of the first known attempts at integrating a dynamic and disaggregated land-use model with a traffic microsimulator and compares its predictions of land use to those from an integration of the same land-use model with a more traditional four-step travel demand model. For our study area of Chittenden County, Vermont, we used a 40-year simulation beginning in 1990. Predicted differences in residential units between models for 2030 broken down by town correlated significantly with predicted differences in accessibility. The two towns with the greatest predicted differences in land use and accessibility are also the towns that currently have the most severe traffic bottlenecks and poorest route redundancy. Our results suggest that this particular integration of a microsimulator with a disaggregated land-use model is technically feasible, but that in the context of an isolated, small metropolitan area, the differences in predicted land use are small.     

道路交通事故分析及预防对策

道路交通事故的预防是一个系统工程,通过对全国和新疆道路交通安全现状与道路交通事故原因的对比分析,分别从影响道路交通安全的人、车、路及环境四个方面提出了降低和预防道路交通事故的发生,确保行车安全的相应措施和建议。     

Integrated model for traffic flow forecasting under rainy conditions

Inclement weather, such as heavy rain, significantly affects road traffic flow operation, which may cause severe congestion in road networks in cities. This study investigates the effect of inclement weather, such as rain events, on traffic flow and proposes an integrated model for traffic flow parameter forecasting during such events. First, an analysis of historical observation data indicates that the forecasting error of traffic flow volume has a significant linear correlation with mean precipitation, and thus, forecasting accuracy can be considerably improved by applying this linear correlation to correct forecasting values. An integrated online precipitation‐correction model was proposed for traffic flow volume forecasting based on these findings. We preprocessed precipitation data transformation and used outlier detection techniques to improve the efficiency of the model. Finally, an integrated forecasting model was designed through data fusion methods based on the four basic forecasting models and the proposed online precipitation‐correction model. Results of the model validation with the field data set show that the designed model is better than the other models in terms of overall accuracy throughout the day and under precipitation. However, the designed model is not always ideal under heavy rain conditions. Copyright © 2016 John Wiley & Sons, Ltd.     

Stability analysis of the classical car-following model

This paper investigates the stability of the classical car-following model (for example, Chandler et al., Operations Research, 6, 165–184, 1958; Herman et al., Operations Research, 7, 86–106, 1959; Wilhelm and Schmidt, Transportation Engineering Journal (ASCE) 99, 923–933, 1973). Conditions for local and asymptotic stability as defined in the references cited are established for the linear model. These differ from those in the literature in two ways. First, it will be shown that, in the autonomous model when the product of the coefficient of proportionality α and the reaction time τ is less than or equal to 1/e, there exist oscillatory solutions with higher frequencies than 2π, although there are none with lower frequencies. Secondly, asymptotic stability is considered along with local stability. The derived condition for asymptotic stability is both necessary and sufficient. In addition, the condition depends on the frequency of the forcing term, with the sufficient condition for the asymptotic stability found in the literature being included as a special case. The nonlinear model is considered by linearization and numerical integrations. Some practical values of parameters are tested for the stability of the model. The analyses in this paper are extended to consider different values of α and τ for different drivers in the line.     

A sensitivity-based approach for adaptive decomposition of anticipatory network traffic control

Anticipatory optimal network control is defined as the problem of determining the set of control actions that minimizes a network-wide objective function. This not only takes into account local consequences on the propagation of flows, but also the global network-wide routing behavior of the users. Such an objective function is, in general, defined in a centralized setting, as knowledge regarding the whole network is needed to correctly compute it. Reaching a level of centralization sufficient to attain network-wide control objectives is however rarely realistic in practice. Multiple authorities are influencing different portions the network, separated either hierarchically or geographically. The distributed nature of networks and traffic directly influences the complexity of the anticipatory control problem.This is our motivation for this work, in which we introduce a decomposition mechanism for the global anticipatory network traffic control problem, based on dynamic clustering of traffic controllers. Rather than solving the full centralized problem, or blindly performing a full controller-wise decomposition, this technique allows recognizing when and which controllers should be grouped in clusters, and when, instead, these can be optimized separately.The practical relevance with respect to our motivation is that our approach allows identification of those network traffic conditions in which multiple actors need to actively coordinate their actions, or when unilateral action suffices for still approximating global optimality.This clustering procedure is based on well-known algebraic and statistical tools that exploit the network’s sensitivity to control and its structure to deduce coupling behavior. We devise several case studies in order to assess our newly introduced procedure’s performances, in comparison with fully decomposed and fully centralized anticipatory optimal network control, and show that our approach is able to outperform both centralized and decomposed procedures.     

Using high-resolution event-based data for traffic modeling and control: An overview

Research on using high-resolution event-based data for traffic modeling and control is still at early stage. In this paper, we provide a comprehensive overview on what has been achieved and also think ahead on what can be achieved in the future. It is our opinion that using high-resolution event data, instead of conventional aggregate data, could bring significant improvements to current research and practices in traffic engineering. Event data records the times when a vehicle arrives at and departs from a vehicle detector. From that, individual vehicle’s on-detector-time and time gap between two consecutive vehicles can be derived. Such detailed information is of great importance for traffic modeling and control. As reviewed in this paper, current research has demonstrated that event data are extremely helpful in the fields of detector error diagnosis, vehicle classification, freeway travel time estimation, arterial performance measure, signal control optimization, traffic safety, traffic flow theory, and environmental studies. In addition, the cost of event data collection is low compared to other data collection techniques since event data can be directly collected from existing controller cabinet without any changes on the infrastructure, and can be continuously collected in 24/7 mode. This brings many research opportunities as suggested in the paper.     

A cell-based Merchant-Nemhauser model for the system optimum dynamic traffic assignment problem

A cell-based variant of the Merchant-Nemhauser (M-N) model is proposed for the system optimum (SO) dynamic traffic assignment (DTA) problem. Once linearized and augmented with additional constraints to capture cross-cell interactions, the model becomes a linear program that embeds a relaxed cell transmission model (CTM) to propagate traffic. As a result, we show that CTM-type traffic dynamics can be derived from the original M-N model, when the exit-flow function is properly selected and discretized. The proposed cell-based M-N model has a simple constraint structure and cell network representation because all intersections and cells are treated uniformly. Path marginal costs are defined using a recursive formula that involves a subset of multipliers from the linear program. This definition is then employed to interpret the necessary condition, which is a dynamic extension of the Wardrop’s second principle. An algorithm is presented to solve the flow holding back problem that is known to exist in many discrete SO-DTA models. A numerical experiment is conducted to verify the proposed model and algorithm.