共查询到17条相似文献,搜索用时 218 毫秒
1.
2.
3.
4.
5.
6.
文档管理和知识管理有着紧密的联系,企业文档的管理过程中需要对知识进行获取,然后对企业知识进行应用、共享与创新。本文针对的知识管理系统和企业实际业务联系紧密的问题,根据企业的实际文档需求,提出了一个基于知识管理的企业文档管理模型,实现了对知识进行获取和利用的功能,最后构建了一个基于知识管理的企业文档管理的框架结构。 相似文献
7.
基于VB. NET的CATIA三维参数化船舶设备库的开发 总被引:1,自引:0,他引:1
为提高设计建模效率,以CATIA系统中知识工程模块为支持平台,给出三维参数化驱动的船载设备模型库构建方案,并使用VB.NET在CATIA上开发建立三维参数化设备库原型系统。该系统采用通用的关系型数据库存储和管理设备模型信息,提高了模型数据编辑修改和更新的方便性,降低了模型数据的冗余度,并可通过网络数据库使设备模型库得到共享,从而显著提高了三维船舶总布置设计建模的效率。 相似文献
8.
基于OWL的制造工艺知识本体模型 总被引:2,自引:0,他引:2
讨论了制造工艺知识重用方面存在的问题,阐述了本体建模方法在促进知识共享方面的优势,并以铸造工艺为实例,结合W 3C组织推荐的本体语言OWL(Web Ontology Language)本体建模语言建立了铸造工艺本体信息模型。由于OWL具有丰富的语义表达能力,因此基于此方法建立的本体信息模型在知识表达上比以往所建的模型更清晰、完整,也有利于制造工艺知识的共享和重用。 相似文献
9.
针对传统的Tribon系统局部构件内建样式少、交互式重复操作造成的效率低,提出了基于知识工程的船舶局部构件智能化设计方法.该方法通过知识工程技术,结合Tribon系统内置TIL、Macro、Vitesse二次开发工具,获取船舶局部构件设计知识并应用于用局部构件新型样式设计,更新局部构件知识库和实现局部构件的智能化设计建模,辅助设计人员快速完成设计.肘板的设计样例表明:将知识工程应用局部构件的二次开发,大大缩短了设计时间,提高了设计的质量和效率,可减少设计人员对设计规范、经验的依赖. 相似文献
10.
11.
12.
13.
14.
15.
16.
Glenn D. Aguilar Hiroyuki Yamamoto Takeo Koyama 《Journal of Marine Science and Technology》1996,1(3):138-148
The development of a parametric hull form design system utilizing combined knowledge-based and objectoriented methodologies,
approaches, and techniques is the major purpose of this research. One objective was the development of a powerful, intuitive,
and parameter-based hull definition system with a related hull definition advisory system that would provide useful and necessary
advice to the user. Object and knowledge modeling activities were conducted during the analysis and design stage to facilitate
the implementation of a hull design program and advisory system. The hull design system includes the generation of a geometric
model from a process of aggregating simple user-selected shapes representing different boundaries. Design involves the capability
to vary simple parameters such as entrance angles, length-breadth ratios, and radii to define local and general surface geometries.
Hydrostatic calculations are included for analysis; results are referred to an advisory system for evaluation and the determination
of the acceptability of parameters and analysis results. The advisory system includes a knowledge bases consisting of hull
form databases, results of the statistical analysis of data, design parameter constraints, and expert knowledge acquired from
designers, reference materials, and technical reports. Use of the design tool with the advisory system results in the rapid
generation of hull forms and associated design evaluations. Flexibility in decision making results from the separation of
the design system from the advisory system. The independence of the two systems allows for a wide range of user experience
with experts using the design tool with minimal reference to the advisory system. On the other hand, the expertise and knowledge
stored in the advisory system is fully available to inexperienced designers and users. 相似文献
17.
Shoji Takechi Kazuhiro Aoyama Toshiharu Nomoto 《Journal of Marine Science and Technology》2002,6(3):158-167
In ship hull production, the accuracy of management activities is extremely important. The block positioning operation in
the erection stage is a key process in such management. The quality of the block positioning determines not only the accuracy
of the final hull, but also the productivity and cost at the erection stage. We have previously proposed the basic concepts
of computer-aided accuracy management. Accuracy management activities consist of "accuracy planning activities" and "accuracy
measurement activities." Accuracy measurement activities involve checking and coping with inaccuracy. We have also proposed
a system of accuracy measurement metrics: one is accuracy for completion (e.g., straightness, flatness), and the other is
accuracy for construction (e.g., the relative joint shapes of each part). This paper explains the detailed accuracy metrics
for a block positioning operation in the erection stage. The quality of the block positioning operation is estimated by this
system: the accuracy of the completed hull can be evaluated by the concept of tolerance, and the accuracy of the construction
process can be evaluated by the concept of labor costs. The prototype of this accuracy metrics system is then implemented.
This metrics system is combined with the optimization software program iSIGHT to decide the best block positioning process.
Then some examples of the block position optimizing process are shown.
Received: November 2, 2001 / Accepted: December 6, 2001 相似文献