Optimal design and benefits of a short turning strategy for a bus corridor

We develop a short turning model using demand information from station to station within a single bus line-single period setting, aimed at increasing the service frequency on the more loaded sections to deal with spatial concentration of demand considering both operators’ and users’ costs. We find analytical expressions for optimal values of the design variables, namely frequencies (inside and outside the short cycle), capacity of vehicles and the position of the short turn limit stations. These expressions are used to analyze the influence of different parameters in the final solution. The design variables and the corresponding cost components for operators and users (waiting and in-vehicle times) are compared against an optimized normal operation scheme (single frequency). Applications on actual transit corridors exhibiting different demand profiles are conducted, calculating the optimal values for the design variables and the resulting benefits for each case. Results show the typical demand configurations that are better served using a short turn strategy.     

Real-time partway deadheading strategy based on transit service reliability assessment

This paper presents a partway deadheading strategy for transit operations to improve transit service of the peak directions of transit routes. This strategy consists of two phases: reliability assessment of further transit service and optimization of partway deadheading operation. The reliability assessment of further transit service, which is based on the current and recent service reliability, is used to justify whether or not to implement a partway deadheading operation. The objective of the second phase is to determine the beginning stop for a new service for the deadheaded vehicle by maximizing the benefit of transit system. A heuristic algorithm is also defined and implemented to estimate reliability of further transit service and to optimize partway deadheading operation. Then, the partway deadheading strategy proposed in this paper is tested with the data from a transit route in Dalian city of China. The results show the partway deadheading strategy with the reasonable parameters can improve transit service.     

A slack arrival strategy to promote flex-route transit services

Flex-route transit, which combines the advantages of fixed-route transit and demand-responsive transit, is one of the most promising options in low-demand areas. This paper proposes a slack arrival strategy to reduce the number of rejected passengers and idle time at checkpoints resulting from uncertain travel demand. This strategy relaxes the departure time constraints of the checkpoints that do not function as transfer stations. A system cost function that includes the vehicle operation cost and customer cost is defined to measure system performance. Theoretical and simulation models are constructed to test the benefits of implementing the slack arrival strategy in flex-route transit under expected and unexpected demand levels. Experiments over a real-life flex-route transit service show that the proposed slack arrival strategy could improve the system performance by up to 40% with no additional operating cost. The results demonstrate that the proposed strategy can help transit operators provide more cost-efficient flex-route transit services in suburban and rural areas.     

Integrated transit services for minimum cost operation considering heterogeneous demand

Abstract

In large metropolitan areas, public transit is a major mode choice of commuters for their daily travel, which has an important role in relieving congestion on transportation corridors. The purpose of this study is to develop a model which optimizes service patterns (SPs) and frequencies that yield minimum cost transit operation. Considering a general transit route with given stops and origin-destination demand, the proposed model consists of an objective total cost function and a set of constraints to ensure frequency conservation and sufficient capacity subject to operable fleet size. A numerical example is provided to demonstrate the effectiveness of the developed model, in which the demand and facility data of a rail transit route were given. Results show that the proposed model can be applied to optimize integrated SPs and headways that significantly reduce the total cost, while the resulting performance indicators are generated.     

A dynamic station strategy to improve the performance of flex-route transit services

As an innovative combination of conventional fixed-route transit and demand responsive service, flex-route transit is currently the most popular type of flexible transit services. This paper proposes a dynamic station strategy to improve the performance of flex-route transit in operating environments with uncertain travel demand. In this strategy, accepted curb-to-curb stops are labeled as temporary stations, which can be utilized by rejected requests for their pick-up and drop-off. The user cost function is defined as the performance measure of transit systems. Analytical models and simulations are constructed to test the feasibility of implementing the dynamic station strategy in flex-route transit services. The study over a real-life flex-route service indicates that the proposed dynamic station strategy could reduce the user cost by up to 30% without any additional operating cost, when an unexpectedly high travel demand surpasses the designed service capacity of deviation services.     

Optimization of headways with stop‐skipping control: a case study of bus rapid transit system

Bus rapid transit system is designed to provide high‐quality and cost‐efficient passenger transportation services. In order to achieve this design objective, effective scheduling strategies are required. This research aims at improving the operation efficiency and service quality of a BRT system through integrated optimization of its service headways and stop‐skipping strategy. Based on cost analysis for both passengers and operation agencies, an optimization model is established. A genetic algorithms based algorithm and an application‐oriented solution method are developed. Beijing BRT Line 2 has been chosen as a case study, and the effectiveness of the optimal headways with stop‐skipping services under different demand levels has been analyzed. The results has shown that, at a certain demand level, the proposed operating strategy can be most advantageous for passengers with an accepted increase of operating costs, under which the optimum headway is between 3.5 and 5.5 min for stop‐skipping services during the morning peak hour depending on the demand with the provision of stop‐skipping services. The effectiveness of the optimal headways with stop‐skipping services is compared with those of existing headways and optimal headways without stop‐skipping services. The results show that operating strategies under the optimal headways with stop‐skipping services outperforms the other two operating strategies with respect to total costs and in‐vehicle time for passengers. Copyright © 2014 John Wiley & Sons, Ltd.     

Numerical analysis of electric bus fast charging strategies for demand charge reduction

Electric transit buses have been recognized as an important alternative to diesel buses with many environmental benefits. Electric buses employing lithium titanate batteries can provide uninterrupted transit service thanks to their ability of fast charging. However, fast charging may result in high demand charges which will increase the fuel costs thereby limiting the electric bus market penetration. In this paper, we simulated daily charging patterns and demand charges of a fleet of electric buses in Tallahassee, Florida and identified an optimal charging strategy to minimize demand charges. It was found that by using a charging threshold of 60–64%, a $160,848 total saving in electricity cost can be achieved for a five electric bus fleet, comparing to a charging threshold of 0–28%. In addition, the impact of fleet sizes on the fuel cost was investigated. Fleets of 4 and 12 buses will achieve the lowest cost per mile driven when one fast charger is installed.     

Development of a transit network from a street map database with spatial analysis and dynamic segmentation

This paper presents an integrated transit-oriented travel demand modeling procedure within the framework of geographic information systems (GIS). Focusing on transit network development, this paper presents both the procedure and algorithm for automatically generating both link and line data for transit demand modeling from the conventional street network data using spatial analysis and dynamic segmentation. For this purpose, transit stop digitizing, topology and route system building, and the conversion of route and stop data into link and line data sets are performed. Using spatial analysis, such as the functionality to search arcs nearest from a given node, the nearest stops are identified along the associated links of the transit line, while the topological relation between links and line data sets can also be computed using dynamic segmentation. The advantage of this approach is that street map databases represented by a centerline can be directly used along with the existing legacy urban transportation planning systems (UTPS) type travel modeling packages and existing GIS without incurring the additional cost of purchasing a full-blown transportation GIS package. A small test network is adopted to demonstrate the process and the results. The authors anticipate that the procedure set forth in this paper will be useful to many cities and regional transit agencies in their transit demand modeling process within the integrated GIS-based computing environment.     

Planning hierarchical urban transit systems for reductions in greenhouse gas emissions

Public transit systems with high occupancy can reduce greenhouse gas (GHG) emissions relative to low-occupancy transportation modes, but current transit systems have not been designed to reduce environmental impacts. This motivates the study of the benefits of design and operational approaches for reducing the environmental impacts of transit systems. For example, transit agencies may replace level-of-service (LOS) by vehicle miles traveled (VMT) as a criterion in evaluating design and operational changes. In previous work, we explored the unintended consequences of lowering transit LOS on emissions in a single-technology transit system. Herein, we extend the analysis to account for a more realistic case: a transit system with a hierarchical structure (trunk and feeder lines) providing service to a city where demand is elastic. By considering the interactions between the trunk and the feeder systems, we provide a quantitative basis for designing and operating integrated urban transit systems that can reduce GHG emissions and societal costs. We find that highly elastic transit demand may cancel emission reduction potentials resulting from lowering LOS, due to demand shifts to lower occupancy vehicles. However, for mass transit modes, these potentials are still significant. Transit networks with buses, bus rapid transit or light rail as trunk modes should be designed and operated near the cost-optimal point when the demand is highly elastic, while this is not required for metro. We find that the potential for unintended consequences increases with the size of the city. Our results are robust to uncertainties in the costs and emissions parameters.     

Two-phase stochastic program for transit network design under demand uncertainty

This paper develops a reliability-based formulation for rapid transit network design under demand uncertainty. We use the notion of service reliability to confine the stochastic demand into a bounded uncertainty set that the rapid transit network is designed to cover. To evaluate the outcome of the service reliability chosen, flexible services are introduced to carry the demand overflow that exceeds the capacity of the rapid transit network such designed. A two-phase stochastic program is formulated, in which the transit line alignments and frequencies are determined in phase 1 for a specified level of service reliability; whereas in phase 2, flexible services are determined depending on the demand realization to capture the cost of demand overflow. Then the service reliability is optimized to minimize the combined rapid transit network cost obtained in phase 1, and the flexible services cost and passenger cost obtained in phase 2. The transit line alignments and passenger flows are studied under the principles of system optimal (SO) and user equilibrium (UE). We then develop a two-phase solution algorithm that combines the gradient method and neighborhood search and apply it to a series of networks. The results demonstrate the advantages of utilizing the two-phase formulation to determine the service reliability as compared with the traditional robust formulation that pre-specifies a robustness level.     

Location of bus garages

The location of bus garages is a complex issue that has received recent attention in the literature. Given a bus system, the number of bus garages and their locations depend on garage cost, deadheading cost and environmental impacts. An approximate analytical model is used to determine the number of bus garages that minimizes the above costs. The concept of a slowly varying density of bus-route origins (hence deadheads) per unit area is used to model deadheading costs. The increased deadheading caused by breakdowns and accidents is also considered. The garage cost is modeled as a function of the number of buses stored. A closed-form solution is obtained for the optimal density of garages, when the garage cost function is linear. The actual locations of garages and the allocations of buses to the garages are found using a discrete space location-allocation model formulated so as to consider the environmental impact associated with buses deadheading through populated neighborhoods.     

Joint optimization of a rail transit line and its feeder bus system

A model is developed for jointly optimizing the characteristics of a rail transit route and its associated feeder bus routes in an urban corridor. The corridor demand characteristics are specified with irregular discrete distributions which can realistically represent geographic variations. The total cost (supplier plus user cost) of the integrated bus and rail network is minimized with an efficient iterative method that successively substitutes variable values obtained through classical analytic optimization. The optimized variables include rail line length, rail station spacings, bus headways, bus stop spacings, and bus route spacing. Computer programs are designed for optimization and sensitivity analysis. The sensitivity of the transit service characteristics to various travel time and cost parameters is discussed. Numerical examples are presented for integrated transit systems in which the rail and bus schedules may be coordinated.     

An integrated measure of accessibility and reliability of mass transit systems

The growth of a city or a metropolis requires well-functioning transit systems to accommodate the ensuing increase in travel demand. As a result, mass transit networks have to develop and expand from simple to complex topological systems over time to meet this demand. Such an evolution in the networks’ structure entails not only a change in network accessibility, but also a change in the level of network reliability on the part of stations and the entire system as well. Network accessibility and reliability are popular measures that have been widely applied to evaluate the resilience and vulnerability of a spatially networked system. However, the use of a single measure, either accessibility or reliability, provides different results, which demand an integrated measure to evaluate the network’s performance comprehensively. In this paper, we propose a set of integrated measures, named ACCREL (Integrated Accessibility and Reliability indicators) that considers both metrics in combination to evaluate a network’s performance and vulnerability. We apply the new measures for hypothetical mass transit system topologies, and a case study of the metro transit system in Seoul follows, highlighting the dynamics of network performance with four evolutionary stages. The main contribution of this study lies in the results from the experiments, which can be used to inform how transport network planning can be prepared to enhance the network functionality, thereby achieving a well-balanced, accessible, and reliable system. Insights on network vulnerability are also drawn for public transportation planners and spatial decision makers.     

Policy analysis of third party electronic coupons for public transit fares

Mobile technologies are generating new business models for urban transport systems, as is evident from recent startups cropping up from the private sector. Public transport systems can make more use of mobile technologies than just for measuring system performance, improving boarding times, or for analyzing travel patterns. A new transaction model is proposed for public transport systems where travelers are allowed to pre-book their fares and trade that demand information to private firms. In this public-private partnership model, fare revenue management is outsourced to third party private firms such as big box retail or large planned events (such as sports stadiums and theme parks), who can issue electronic coupons to travelers to subsidize their fares. This e-coupon pricing model is analyzed using marginal cost theory for the transit service and shown to be quite effective for monopolistic coupon rights, particularly for demand responsive transit systems that feature high cost fares, non-commute travel purposes, and a closed access system with existing pre-booking requirements. However, oligopolistic scenarios analyzed using game theory and network economics suggest that public transport agencies need to take extreme care in planning and implementing such a policy. Otherwise, they risk pushing an equivalent tax on private firms or disrupting the urban economy and real estate values while increasing ridership.     

Optimal design of a short‐turning strategy considering seat availability

We develop a methodology to optimize the schedule coordination of a full‐stop service pattern and a short‐turning service pattern on a bus route. To capture the influence of bus crowding and seat availability on passengers' riding experience, we develop a Markov model to describe the seat‐searching process of a passenger and an approach to estimate the transition probabilities of the Markov model. An optimization model that incorporates the Markov model is proposed to design the short‐turning strategy. The proposed model minimizes the total cost, which includes operational cost, passengers' waiting time cost and passengers' in‐vehicle travel time cost. Algorithm is developed to produce optimal values of the decision variables. The proposed methodology is evaluated in a case study. Compared with methodologies that ignore the effect of bus crowding, the proposed methodology could better balance bus load along the route and between two service patterns, provide passengers with better riding experience and reduce the total cost. In addition, it is shown that the optimal design of the short‐turning strategy is sensitive to seat capacity. Copyright © 2016 John Wiley & Sons, Ltd.     

Demand responsive transit systems with time-dependent demand: User equilibrium,system optimum,and management strategy

The operating cost of a demand responsive transit (DRT) system strictly depends on the quality of service that it offers to its users. An operating agency seeks to minimize operating costs while maintaining the quality of service while users experience costs associated with scheduling, waiting, and traveling within the system. In this paper, an analytical model is employed to approximate the agency's operating cost for running a DRT system with dynamic demand and the total generalized cost that users experience as a result of the operating decisions. The approach makes use of Vickrey's (1969) congestion theory to model the dynamics of the DRT system in the equilibrium condition and approximate the generalized cost for users when the operating capacity is inadequate to serve the time-dependent demand over the peak period without excess delay. The efficiency of the DRT system can be improved by optimizing one of three parameters that define the agency's operating decision: (1) the operating capacity of the system, (2) the number of passengers that have requested a pick-up and are awaiting service, and (3) the distribution of requested times for service from the DRT system. A schedule management strategy and dynamic pricing strategies are presented that can be implemented to manage demand and reduce the total cost of the DRT system by keeping the number of waiting requests optimized over the peak period. In the end, proposed optimization strategies are compared using a numerical example.     

Reducing the cost of peak hour transit service through contracting out service

Transit service contracting has responded to fiscal and financial woes of public transit agencies as the most uniquely attractive cost‐saving strategy at present. Most transit service contracting, however, has been in the traditional provision of entire fixed route bus service or commuter express bus service, and exclusive demand responsive service for the general public or for special disadvantaged population groups such as the elderly and/or the handicapped. This paper presents a new module in transit service contracting whereby the public and private operators jointly provide the peak service on the same route and at the same time. While the public agency provides the base demand of the service, the private provider provides the excess demand, both following the same schedules and similar service arrangements. In this paper, proposed service arrangements, costing and contracting procedures are discussed. It is also reported that substantial cost savings ranging from 32 to 57% with an average savings of 48% can be achieved if the excess peak hour bus transit service on highly peaked routes in public transit agencies is contracted to competing private operator(s).     

Intermodal Transit System Coordination

In urban areas where transit demand is widely spread, passengers may be served by an intermodal transit system, consisting of a rail transit line (or a bus rapid transit route) and a number of feeder routes connecting at different transfer stations. In such a system, passengers may need one or more transfers to complete their journey. Therefore, scheduling vehicles operating in the system with special attention to reduce transfer time can contribute significantly to service quality improvements. Schedule synchronization may significantly reduce transfer delays at transfer stations where various routes interconnect. Since vehicle arrivals are stochastic, slack time allowances in vehicle schedules may be desirable to reduce the probability of missed connections. An objective total cost function, including supplier and user costs, is formulated for optimizing the coordination of a general intermodal transit network. A four-stage procedure is developed for determining the optimal coordination status among routes at every transfer station. Considering stochastic feeder vehicle arrivals at transfer stations, the slack times of coordinated routes are optimized, by balancing the savings from transfer delays and additional cost from slack delays and operating costs. The model thus developed is used to optimize the coordination of an intermodal transit network, while the impact of a range of factors on coordination (e.g., demand, standard deviation of vehicle arrival times, etc) is examined.     

Continuous approximation for skip-stop operation in rail transit

Operating speed of a transit corridor is a key characteristic and has many consequences on its performance. It is generally accepted that an increased operating speed for a given fleet leads to reduced operating costs (per kilometer), travel and waiting times (three changes that can be computed precisely), an improved comfort and level of service, which can attract new passengers who are diverted from automobile (items harder to estimate precisely). That is why several operation schemes which aim to increase the operating speed are studied in the literature, such as deadheading, express services, and stop skipping.A novel category of solutions to this problem for one-way single-track rail transit is to perform accelerated transit operations with fixed stopping schedules. The concept is quite simple: as the time required for stopping at each station is an important part of travel time, reducing it would be a great achievement. Particular operations that take advantage of this idea already exist. This paper focuses on one of them: the skip-stop operation for rail transit lines using a single one-way track. It consists in defining three types of stations: AB stations where all the trains stop, and A and B stations where only half of the trains stop (stations type A and B are allocated interchangeably). This mode of operation is already described in the literature (Vuchic, 1973, Vuchic, 1976, Vuchic, 2005) and has been successfully implemented in the Metro system of Santiago, Chile.This work tackles the problem with a continuous approximation approach. The problem is described with a set of geographically dependent continuous parameters like the density of stations for a given line. Cost functions are built for a traditional (all-stop) operation and for skip-stop operation as described above. A simple example is presented to support this discussion. Finally, a discussion about the type of scenarios in which skip-stop operations are more beneficial is presented.     

On incentives and optimal effort to improve bus transit performance

ABSTRACT

This paper studies incentive-based subsidy to transit systems to improve performance. It derives a formula for optimal effort that equalizes marginal cost and marginal benefit and derives some principles from it among which is that the larger the value of a transit system’s performance criterion the larger the effort it will exert to improve it. Next, using a constrained cost minimization approach it derives a nonlinear cost function that includes optimal effort and estimates it using an unbalanced panel data of single mode U.S. bus transit systems. The results show that optimal effort is the equivalent of seven full-time employees (15,243 labor hours) per year and in real terms it results in 0.6% cost saving (US$198,331) and US$836,796 in incentive subsidy per observation. The implications of these findings are examined.