共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
文章介绍了车载通讯终端(T-BOX)工作原理和在汽车电子电磁兼容测试时所遇到的RE、BCI和ESD等常见问题;从原理设计、器件选型、PCB布局及结构设计等多方进行了详细的分析,并列出了车载通讯终端EMC的设计规则,确保了产品良好的性能。 相似文献
3.
4.
针对军用车辆研制中的电磁兼容问题,介绍了一种全新的系统电磁兼容设计方法基于顶层的整车电磁兼容精确化协同优化设计方法.该方法有效实现了从军用车辆总体角度进行的全车电磁兼容性设计,并从顶层高度提出全车电磁兼容量化指标要求.该方法不但可以实现全车电磁兼容问题在过程中得到管理和控制,并且可以降低电磁兼容性设计成本,提高设计效率. 相似文献
5.
本文首先详细分析国际和国内汽车领域电磁兼容技术目前发展状况,然后提出一种基于越野车系统开发的电磁兼容技术设计开发过程,最后基于实际工作经验总结出电磁兼容设计要点和相关难题。在实际开发项目中,建立自己的设计流程规范,实现整车通过电磁兼容试验的设计指标。本文主要提供一种基于国际电子计算机电磁兼容数值分析平台,结合当代电磁兼容与电子计算机仿真分析技术开发的汽车领域电磁兼容数值分析与统计的途径,可以有效地实现模拟仿真,根据研究成果归纳出汽车领域电磁兼容电子计算机仿真的核心方法。 相似文献
6.
7.
8.
9.
10.
11.
12.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(4):573-596
An existing driver–vehicle model with neuromuscular dynamics is improved in the areas of cognitive delay, intrinsic muscle dynamics and alpha–gamma co-activation. The model is used to investigate the influence of steering torque feedback and neuromuscular dynamics on the vehicle response to lateral force disturbances. When steering torque feedback is present, it is found that the longitudinal position of the lateral disturbance has a significant influence on whether the driver’s reflex response reinforces or attenuates the effect of the disturbance. The response to angle and torque overlay inputs to the steering system is also investigated. The presence of the steering torque feedback reduced the disturbing effect of torque overlay and angle overlay inputs. Reflex action reduced the disturbing effect of a torque overlay input, but increased the disturbing effect of an angle overlay input. Experiments on a driving simulator showed that measured handwheel angle response to an angle overlay input was consistent with the response predicted by the model with reflex action. However, there was significant intra- and inter-subject variability. The results highlight the significance of a driver’s neuromuscular dynamics in determining the vehicle response to disturbances. 相似文献
13.
预应力曲线箱梁和异形箱梁的研究 总被引:7,自引:0,他引:7
近年来 ,国内外学者对曲线箱梁和异形箱梁的静力分析理论和计算方法作过大量的研究 ,但这些理论和方法在某种程度上都存在着一定的局限性 ,特别是在实际设计工作中 ,运用起来不能得心应手。为此本文在综合前人已取得经验下 ,针对桥梁结构设计中分析曲线箱梁、异形箱梁 ,经常遇到的难题进行了研究 ,建立一个较为完善的理论和方法 ,编制了等参元空间分析程序。在实际工程中进行实桥试验 ,验证了本文理论和方法的正确性。本文的研究工作更准确描述了箱梁的荷载响应 ,为设计人员提供直观的设计依据。对曲线箱梁和异形箱梁受力特性有了更一步的理解 ,并提出了新的见解 相似文献
14.
混凝土的推广使用已有一个世纪,目前在现代工程建设中仍占有重要的地位。而在今天,混凝土的裂缝较为普遍,在桥梁工程中裂缝几乎无所不在,尽管我们在施工中采取各种各样的措施,但收效甚微,裂缝仍然时有出现。该文指出,究其原因,人们对混凝土温度变化所产生的应力注意不够是其中之一,尤其是大体积混凝土。对此,温度应力与温度控制具有重要的意义。 相似文献
15.
J. R. Serrano F. J. Arnau V. Dolz A. Tiseira M. Lejeune N. Auffret 《International Journal of Automotive Technology》2008,9(3):277-288
This article presents a two-stage turbocharged heavy-duty diesel (HDD) engine designed to fulfil the US2007 anti-pollution
directive. This directive imposes very restrictive limits on the NOx and particle emissions of HDD engines. In this work,
the possibility of combining particle traps in the exhaust line to reduce soot emissions with very high EGR rates to reduce
NOx emissions is considered. This new generation engine implements two-stage turbocharging in order to improve the bsfc when
the engine is working on steady conditions as well as to optimize the engine transient response. After carrying out the tests,
the results were analyzed and the engine settings were adjusted to maximise its behaviour and minimise pollutant emissions.
NOx and soot emission peaks were also analyzed at engine transient conditions in order to keep them under certain levels,
and thus maintain the overall pollutant emissions to a level that is as low as possible. In summary, a double-stage turbocharging
configuration can greatly improve engine driveability (between 23% and 36% depending on engine speed), while reducing NOx
emissions during transient evolution without increasing opacity peaks beyond the stated limits. 相似文献
16.
17.
该文从研究超薄磨耗层的级配的选择入手,简单分析了超薄磨耗层的结构特点和强度形成机理,给出了几种国内外常用的超薄磨耗层级配范围,并提出了将SAC-10做为其研究的设计级配。在研究超薄磨耗层沥青混合料配合比设计的基础上,通过对SAC-10沥青混合料的马歇尔试验,确定了该沥青混合料的矿料级配和最佳沥青含量。最后采用车辙试验、浸水马歇尔和冻融劈裂试验及小梁弯曲试验等一系列试验,检测超薄磨耗层沥青混合料的各项路用性能,为在实际工程中的应用提供理论依据。 相似文献
18.
19.
公路工程监理人员市场供需模型研究 总被引:2,自引:0,他引:2
提出了建立监理人员需求和供给模型的方法,推导了计算公式。根据公路建设发展的历史数据,对历年公路建设监理人员需求和供给进行了计算和比较。 相似文献
20.
本文提出一种有效路形测量的新方法,研究轮胎的位移包容性。提出以轮胎包容参数为变量把真实路面功率谱变换为有效路面功率谱的新方法。该研究是道路激励模拟的基础研究。 相似文献