悬挑式码头施工技术研究

本文主要介绍了某港煤炭码头一期工程sg-04标段码头工程胸墙浇筑的一系列措施,通过胸墙模板、三脚托架的设计、底板的铺设等方面探讨了悬挑1m胸墙的施工工艺。通过实践证明,此工艺对其他施工企业的现场施工具有较强的借鉴意义。     

防波堤胸墙模板设计要点与验算

以温岭中心渔港防波堤工程的胸墙施工为例,介绍了高大型胸墙施工采用的整体式移动钢模板的模板结构设计、移动系统设计及模体的组装与运行,并对模板及钢结构桁架系统进行了设计验算。     

重力式码头现浇胸墙模板设计及质量控制

以广东某电厂新建配套码头的胸墙施工为例,介绍了高大型胸墙的施工工艺,分析了重力式码头胸墙模板的制作安装过程,并验算了模板、钢结构的桁架系统。最后总结出了重力式码头大体积混凝土胸墙施工的质量控制措施。     

波高取值对斜坡堤胸墙结构设计影响的探讨

斜坡堤堤顶设胸墙是常用的防浪结构型式，在已建的工程中胸墙顶高程一般定在不低于设计高水位以上1．0倍设计波高处，而交通部1998年发布的《防波堤设计与施工规范》JTJ298－98对于设计波高值注释的不明确给设计带来一定的困惑，本文通过波浪断面模型试验结果，分析波高取值对胸墙结构设计的影响，并提出有关计算参数的建议。     

悬挑式垂直双鼓护舷胸墙模板工艺

本文通过两个工程实例阐述悬挑式垂直双鼓一板护舷的胸墙模板工艺,解决悬挑式垂直双鼓护舷胸墙模板的施工难点,说明此类胸墙模板的结构体系、模板支拆工艺、成熟的细部构造和施工控制要点,可为类似工程施工提供借鉴经验。     

大型组合钢模板混凝土施工工艺在码头胸墙施工中的设计与应用

胸墙是码头的重要结构,其施工质量是码头使用寿命和外观的重要因素。介绍了胸墙的大型组合钢模板的造型,结构设计、结构验算。对大模板安装、拆除与加固以及混凝土的施工作了详细阐述。最后提出了一些施工时注意的要点与要采取的相关措施。该施工工艺可大大提高施工效率和成品质量。     

关于防波堤施工技术的探讨

本文对一种新型的单桶多仓防波堤结构进行了研究.该新型桶式结构防波堤具有前期准备工作少、耗时少、不需要进行软土清理,对环境和水源的污染破坏程度小、施工成本低、美观性好等优点.该新型桶式结构防波堤在施工中可以把自动化控制技术、气浮负压下沉工艺、无底模板工艺和浮游稳定等技术融合运用,使施工技术更加完善.     

有护面块体掩护的斜坡堤弧形胸墙波压力研究

弧形胸墙可以有效减小斜坡堤越浪、降低胸墙顶高程,因此越来越多地在工程中采用。但在规范中对斜坡式防波堤弧形胸墙波压力计算方法没有明确规定。结合工程实例,将弧形胸墙波压力物理模型实测结果与现行规范直立胸墙波压力计算结果进行对比分析,总结了该工程防波堤弧形胸墙在有掩护条件下所受的波压力情况,供工程设计参考。     

海外深水板桩码头胸墙施工技术

通过对巴基斯坦卡拉奇深水港码头大尺寸胸墙工程特点及施工条件的透彻分析,应用跳跃式挂架反吊系统提供模板支撑平台以及混凝土分层浇筑及质量控制关键技术,解决了底面高程低于潮位的大尺寸胸墙堵漏难、潮位影响大、混凝土干施工作业面形成困难等施工难题,形成一套安全可靠、行之有效的施工工艺。     

大型重力式码头胸墙施工技术分析与施工工艺探讨

胸墙是大型重力式码头结构中非常重要的组成部分,胸墙在码头水工建筑物中起着至关重要的作用,因此,胸墙施工工程的特点、施工技术以及工艺也越来越受人们所关注,所以,文章主要对大型重力式码头胸墙施工技术与施工工艺进行简要论述。     

Errata

正In the paper"Influence of Fouling Assemblage on the Corrosion Behaviour of Mild Steel in the Coastal Waters of The Gulf of Mannar,India"in Vol.12,No.4,Page:509,References were lost,and the two authors’biographies were identical.The correct text is shown below.We apologize to the authors and our readers for any inconvenience caused by the errors.     

Journal of Marine Science and Application 2014 Sum. Contents

正~~     

第34届海洋、离岸及极地工程国际会议(英文)

正St.John's,Newfoundland,Canada,May 31-June 5,2015 OMAE2015 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to: meet and present advances in technology and its scientific support;     

联合作战计划和执行系统

全球指挥控制系统(GCCS)实施当前美国海军网络中心战信息基础设施的联合计划网络。联合作战计划和执行系统(JOPES)支持GCCS实现联合计划。JOPES有两类计划：时间不限的精密预案计划生成作战计划、方案计划或职能计划；时间敏感的危机行动计划生成作战命令或战役方案。前者在和平时期创建的作战计划是后者的计划基础，加速应付危机的能力。     

Eastbound or westbound ?

In terms of equal sailing distances, where is the inflexion when ships depart from ports in the Asian Continent to New York via Suez and/or Panama？
The answer is China South Port Group （Hong Kong, Shenzhen and Guangzhou）.     

Recent progress on wave induced loading measurements in warships

Recent measurements of wave induced hull strain and flexure in RN warships are presented together with the derivation of the current design criteria for extreme hull girder bending loads. The history of the development of the shipboard instrumentation used is given and recent developments to improve the quality and ease of analysis of the data are described. An unexpectedly high transverse asymmetry in the longitudinal strains measured in destroyers is shown to be the result of a combination of vertical and lateral bending in oblique seas. Finally recent theoretical comparisons between the loading of Deep-Vee hulls and conventional UK rounded bilge hulls are presented which demonstrate the higher loading experienced by this type of hull form.     

桥梁防撞设施物理模型试验

物理模型试验是预报防撞设施所受撞击力及优化设计方案的主要方法之一。结合杭州湾大桥柔性防撞设施及东海大桥独立式防撞体设计方案,阐述了船—防撞体撞击试验的基本原理、方法、试验方案及相关试验结果。提出了柔性防撞系统的优化方案。试验结果表明,该方案经济有效,可供预报类似桥梁防撞设施撞击力时参考。     

印尼某电厂码头水工建筑物设计

印尼某电厂项目码头水工建筑物包括码头、防波堤和护岸等主要组成部分。在该项目水工建筑物的设计过程中,综合考虑当地的自然条件、施工能力和材料来源等因素,不断优化结构选型和结构断面。根据不同使用要求,护岸分别采用直立式和斜坡式2种结构型式,推荐的设计方案节省投资、施工方便,可供同类工程设计参考。     

Impact of regulation on the performances of long-distance transport services: A comparison of the different approaches in Sweden and Norway

Despite the many socio-economic similarities between Sweden and Norway, differences in jurisdiction, organisation, cooperation, and financing of long-distance passenger train and coach services have led to the development of four distinctively different ways of serving the markets. This paper describes how the train and coach markets have developed in the two countries, with emphasis on regulatory and industrial structure and a couple of performance variables.Looking at passenger rail, both countries separated infrastructure from operation over a decade ago. However, while Norwegian rail is characterised by an almost monopoly supplier, rail services in Sweden are partly decentralised to the responsibility of county authorities and are widely subjected to competitive tendering. The rest of the network is about to be opened up for on-the-track competition. Swedish Rail (SJ) has spent the last decades consolidating its core business (passenger rail) and sold out its other businesses. In contrast, the Norwegian state rail (NSB) has expanded its business to become a major bus operator and property owner, with extensions also into the Swedish market.The coach industry was more recently deregulated in both countries. The Swedish coach market is dominated by privately owned companies operating services to and from Stockholm. In Norway, state-owned NSB is a major coach operator on medium distance routes, and is also the largest partner of Nor-Way Bussekspress which totally dominates long-distance coach services. Further, the Norwegian coach market is characterised by cross-ownership and cooperation which has enabled an extensive route network which covers most of Norway.We find distinct differences in achievements in the two modes and in the two countries. Swedish rail services have succeeded in winning market shares and in renewing and developing both infrastructure and service levels to a greater extent than the Norwegian model. On the other hand, the Norwegian coach market seems to be more developed and efficient compared to its Swedish counterpart.The paper concludes with a discussion on the possible links between the different approaches and the performance observed, with the aim to stimulate further and more detailed research on some important issues.     

开放式数据挖掘系统模型

目前国内已经出现了少量的数据挖掘相关产品。国内数据挖掘软件无论从数量还是质量上比较，都与国外软件存在着较大的差距。随着数据仓库技术的普及，数据挖掘应用的需求越来越强烈，如何缩短这种差距，研发数据挖掘软件产品成为国内业界的一个重要问题。通过引用目前国际通用数据挖掘标准技术来构建开放式的数据挖掘系统模型，该系统模型从可扩展性、可重用性、易用性等方面得到了加强。