Young drivers and graduated licensing: The Ontario case

Despite improvements in road safety over the past several decades, accident rates remain high for young drivers. One accident countermeasure that is expected to improve the safety record of this group is graduated licensing. The philosophy behind this licensing system is that novice drivers, of whom the majority are young, should be restricted to relatively safe driving environments during the initial learning period. Graduated licensing was implemented in the Province of Ontario, Canada in 1994. The objective of this study is to estimate the potential benefits and costs for young drivers associated with two components of the Ontario graduated licensing package: the late-night driving curfew and the high-speed roadway restrictions. Based on accident and travel data for the year 1988, accident-involvement rates per kilometre driven were calculated for different driver groups for various combinations of time of day and roadway speed limit. These rates were then applied to the expected mobility profiles of young drivers affected by graduated licensing. The results of the study support the late-night curfew and suggest that this component of the licensing package should reduce total accident involvements for the affected group by up to 10 percent and fatal accident involvements by up to 24 percent, while reducing their total driving by only four percent. By contrast, the empirical evidence suggest that the high-speed roadway restrictions are likely to increase accident involvements, and thus it is strongly recommended that this component of Ontario's graduated licensing package be changed.     

Utilizing naturalistic driving data for in-depth analysis of driver lane-keeping behavior in rain: Non-parametric MARS and parametric logistic regression modeling approaches

It is known that adverse weather conditions can affect driver performance due to reduction in visibility and slippery surface conditions. Lane keeping is one of the main factors that might be affected by weather conditions. Most of the previous studies on lane keeping have investigated driver lane-keeping performance from driver inattention perspective. In addition, the majority of previous lane-keeping studies have been conducted in controlled environments such as driving simulators. Therefore, there is a lack of studies that investigate driver lane-keeping ability considering adverse weather conditions in naturalistic settings. In this study, the relationship between weather conditions and driver lane-keeping performance was investigated using the SHRP2 naturalistic driving data for 141 drivers between 19 and 89 years of age. Moreover, a threshold was introduced to differentiate lane keeping and lane changing in naturalistic driving data. Two lane-keeping models were developed using the logistic regression and multivariate adaptive regression splines (MARS) to better understand factors affecting driver lane-keeping ability considering adverse weather conditions. The results revealed that heavy rain can significantly increase the standard deviation of lane position (SDLP), which is a very widely used method for analyzing lane-keeping ability. It was also found that traffic conditions, driver age and experience, and posted speed limits have significant effects on driver lane-keeping ability. An interesting finding of this study is that drivers have a better lane-keeping ability in roadways with higher posted speed limits. The results from this study might provide better insights into understanding the complex effect of adverse weather conditions on driver behavior.     

The “field of safe travel” revisited: interpreting driving behaviour performance through a holistic approach

The present paper proposes a conceptual framework for the driver’s visual–spatial perceptual processes. Based on a theoretical analysis of driving proposed by Gibson and Crooks [(1938). A theoretical field-analysis of automobile-driving. The American Journal of Psychology, 51, 453–471. doi:10.2307/1416145], the developed field of safe travel (FoST) framework suggests that at any moment the driver constructs a “field” by integrating two perceptual entities: (i) the possible available spatial fields for locomotion and (ii) the driver’s mental image of ego-vehicle outer-line and motion dynamics. This framework is used to reinterpret in a unified way a number of disparate research findings reported in the literature concerning specific driving sub-tasks (e.g. lane keeping and car following). It is argued that the FoST framework may be used to predict drivers’ behaviour in various traffic/situation environments based on their prioritisation between the above two perceptual entities. Implications of the proposed framework at a theoretical and practical level, in view of the future of driving with multiple levels of automation, are also discussed.     

Safety in the road environment: a driver behavioural response perspective

The existing literature on road safety suggests that a driver's perception of safety is an important influence on their driving behaviour. A challenging research question is how to measure the perception of safety given the complex interactions among drivers, vehicles and the road setting. In this paper, we investigate a sample of driver evaluations of the perception of safety associated with a set of typical road environments. A roundabout was selected as the context for the empirical study. Data was obtained by a computerised survey using the video-captured road and traffic situations. A controlled experiment elicited driver responses when faced with a mixture of attributes that describe the roundabout environment. An ordered probit model identified the contribution of each attribute to the overall determination of the perception of safety. An indicator of perceived safety was developed for a number of typical road and traffic situations and for different driver segments.     

Formal characterization of an efficient driving evaluation process for companies of the transport sector

Public institutions and private companies all around the world agree that road transport is one of the main sectors responsible for global warming. With this in mind, all of them have designed actions to increase efficiency and reduce fuel consumption and emissions. A favorite for the companies is eco-driving because it can improve the fleet performance without a great investment. However, although these programs have achieved promising results in the majority of the experiences, the figures are not so encouraging in the long term. In many cases this decrease is produced by fuzzy reward programs or the total lack of them. Nevertheless, any coherent reward program, in order to be effective, must be associated with a complete and fair evaluation process which takes into account all the different aspects and complexities related with driving. In this paper, we propose a formal characterization of an efficient driving evaluation process which starts with a review of many different driving recommendation systems. These recommendations are used as seeds to build a set of formal competences that any eco driver must have, as well as the learning outcomes associated with each competence. A set of patterns of driving behaviors are defined, that allow confirming any of the learning outcomes. The definition also comprises a set of Key Performance Indicators (KPIs) for each learning outcome. These KPIs allow measuring the progress associated with each competence. Finally, we also propose some relevant differences that must be taken into account for the goals associated with each KPI, depending on the domain of application: type and road geometry, vehicle type (automatic or manual, passengers, cargo or not, public or private), amount of traffic, weather. Some examples of this driver characterization have been included to demonstrate the process.     

Behavior-based consistency-seeking models as deployment alternatives to dynamic traffic assignment models

This paper proposes a behavior-based consistency-seeking (BBCS) model as an alternative to the dynamic traffic assignment paradigm for the real-time control of traffic systems under information provision. The BBCS framework uses a hybrid probabilistic–possibilistic model to capture the day-to-day evolution and the within-day dynamics of individual driver behavior. It considers heterogeneous driver classes based on the broad behavioral characteristics of drivers elicited from surveys and past studies on driver behavior. Fuzzy logic and if–then rules are used to model the various driver behavior classes. The approach enables the modeling of information characteristics and driver response to be more consistent with the real-world. The day-to-day evolution of driver behavior characteristics is reflected by updating the appropriate model parameters based on the current day’s experience. The within-day behavioral dynamics are reactive and capture drivers’ actions vis-à-vis the ambient driving conditions by updating the weights associated with the relevant if–then rules. The BBCS model is deployed by updating the ambient driver behavior class fractions so as to ensure consistency with the real-time traffic sensor measurements. Simulation experiments are conducted to investigate the real-time applicability of the proposed framework to a real-world network. The results suggest that the approach can reasonably capture the within-day variations in driver behavior model parameters and class fractions in the traffic stream. Also, they indicate that deployment-capable information strategies can be used to influence system performance. From a computational standpoint, the approach is real-time deployable.     

The joint analysis of injury severity of drivers in two-vehicle crashes accommodating seat belt use endogeneity

The current study contributes to the existing injury severity modeling literature by developing a multivariate probit model of injury severity and seat belt use decisions of both drivers involved in two-vehicle crashes. The modeling approach enables the joint modeling of the injury severity of multiple individuals involved in a crash, while also recognizing the endogeneity of seat belt use in predicting injury severity levels as well as accommodating unobserved heterogeneity in the effects of variables. The proposed model is applied to analyze the injury severity of drivers involved in two-vehicle road crashes in Denmark.The empirical analysis provides strong support for the notion that people offset the restraint benefits of seat belt use by driving more aggressively. Also, men and those individuals driving heavy vehicles have a lower injury risk than women and those driving lighter vehicles, respectively. At the same time, men and individuals driving heavy vehicles pose more of a danger to other drivers on the roadway when involved in a crash. Other important determinants of injury severity include speed limit on roadways where crash occurs, the presence (or absence) of center dividers (median barriers), and whether the crash involves a head-on collision. These and other results are discussed, along with implications for countermeasures to reduce injury severities in crashes. The analysis also underscores the importance of considering injury severity at a crash level, while accommodating seat belt endogeneity effects and unobserved heterogeneity effects.     

Assessing the long term benefit of banning the use of hand-held wireless devices while driving

An increasing number of legislative efforts have been undertaken to prohibit the use of hand-held wireless devices while driving. As of July 2012, ten states and the District of Columbia enforce laws banning the use of hand-held cell phones while driving. Thirty-nine states and the District of Columbia have banned text messaging while driving. Recent studies of driver behavior suggest that hand-held wireless device usage negatively impacts driver performance. However few studies at the aggregate level address the plausible link between the use of hand-held wireless devices while driving, increased risk of automobile accidents, and government legislative efforts to reduce such risk. This paper analyzes data at the aggregate level and builds a regression model to estimate the long term accident rate reduction due to a hand-held ban. This model differs from previous studies, which consider short term accident rate reduction, by considering time trends in the accident rate due to the ban. Additionally, counties considered in this analysis are placed into groups based on driver density, defined by the number of licensed drivers per centerline mile of roadway, and a separate analysis is performed within these groups. This approach allows one to better quantify the effect of hand-held bans in counties of different driver densities. Results from this paper suggest that bans on hand-held wireless device use while driving reduce the rate of personal injury accidents in counties with high levels of driver density, but may increase accident rates in counties with low driver density levels. These results can inform transportation policymakers interested in reducing automobile-accident-risk attributable to the use of hand-held wireless devices while driving.     

Driving situations and driver decisions at road traffic signals

Driver performance in responding to the green-amber-red signal change was studied based on a sample of 2316 last crossing and first stopping vehicles collected by unobtrusive observations at 10 junction approaches in Singapore. Two schemes, a speed-distance diagram (S-D) and an acceleration-deceleration (A-D) diagram, were used to demarcate the driving situations; the driver actions, as revealed outcomes of driver decision-making, were mapped onto these diagrams. The speed-distance diagram can give some indication on what a driver would possibly do. The more complicated acceleration-deceleration diagram is useful for diagnosing the appropriateness of the driver actions. An application of the A-D diagram was demonstrated, and several situations prone to red-running were noted.     

Eco-driving key factors that influence fuel consumption in heavy-truck fleets: A Colombian case

This research identifies key variables that influence fuel consumption that might be improved through eco-driving training programs under three circumstances that have been scarcely studied before: (a) heavy- and medium-duty truck fleets, (b) long-distance freight transport, and (c) the Latin American region. Based on statistical analyses that include multivariate regression of operational variables on fuel consumption, the impacts of an eco-driving training campaign were measured by comparing ex ante and ex post data. Operational variables are grouped into driving errors, trip conditions, driver behavior, driver profile, and vehicle attributes.The methodology is applied in a freight fleet with nationwide transport operations located in Colombia, where the steepness of its roads plays an important role in fuel consumption. The fleet, composed of 18 trucks, is equipped with state-of-the-art real-time data logger systems. During four months, 517 trips traveling a total distance of 292,512 km and carrying a total of 10,034 tons were analyzed.The results show a baseline average fuel consumption (FC) of 1.716 liters per ton-100 km. A different logistics performance indicator, which measures FC in liters per ton transported each 100 km, shows an average of 3.115. After the eco-driving campaign, reductions of 6.8% and 5.5% were obtained. Drivers’ experience, driving errors, average speed, and weight-capacity ratio, among others, were found to be highly relevant to FC. In particular, driving errors such as acceleration, braking and speed excesses are the most sensitive to eco-driving training, showing reductions of up to 96% on the average number of events per trip.     

Developing evasive action‐based indicators for identifying pedestrian conflicts in less organized traffic environments

There has been a growing interest in using surrogate safety measures such as traffic conflicts to analyse road safety from a broader perspective than collision data alone. This growing interest has been aided by recent advances in automated video‐based traffic conflict analysis. The automation enables accurate calculation of various conflict indicators such as time‐to‐collision and post‐encroachment time. These indicators rely on road users getting within specific temporal and spatial proximity from each other and therefore assume that proximity is a surrogate for conflict severity. However, this assumption may not be valid in many driving environments where close interactions between road users are common. The objective of this paper is to investigate the applicability of time proximity conflict indicators for evaluating pedestrian safety in less‐organized traffic environments with a high mix of road users. Several alternative behavioural conflict indicators based on detecting pedestrian evasive actions are recommended to better measure traffic conflicts in such traffic environments. These indicators represent variations in the spatio‐temporal gait parameters (step length, step frequency and walk ratio) immediately before the conflict point. A highly congested shared intersection in Shanghai, China, with frequent pedestrian conflicts is used as a case study. Traffic conflicts are analysed with the use of automated video‐based analysis techniques. The results showed that evasive action‐based indicators have higher potential to identify pedestrian conflicts and measure their severity in high mix less organized traffic environments than time proximity measures such as time‐to‐collision and post‐encroachment time. Copyright © 2016 John Wiley & Sons, Ltd.     

Towards an understanding of adaptive cruise control

Adaptive cruise control (ACC) provides assistance to the driver in the task of longitudinal control of their vehicle during motorway driving. The system controls the accelerator, engine powertrain and vehicle brakes to maintain a desired time-gap to the vehicle ahead. This research describes the results of a detailed microscopic simulation investigation into the potential impacts of ACC on motorway driving. In addition to simulation, real vehicle driving profiles, obtained from instrumented vehicle experiments in three European countries, have been used to compare real following behaviour with that of a simulated ACC equipped vehicle. This new approach has shown that following with an ACC system can provide considerable reductions in the variation of acceleration compared to manual driving. This indicates a potential comfort gain for the driver and environmental benefits. A number of critical situations in which ACC does not perform well have also been identified. The research also highlights the limitations of microscopic simulation in modelling the impacts of ACC because of the lack of understanding of the interaction between the driver and the ACC system relative to the traffic conditions.     

Development and testing of a fully Adaptive Cruise Control system

Adaptive Cruise Control systems have been developed and introduced into the consumer market for over a decade. Among these systems, fully-adaptive ones are required to adapt their behaviour not only to traffic conditions but also to drivers’ preferences and attitudes, as well as to the way such preferences change for the same driver in different driving sessions. This would ideally lead towards a system where an on-board electronic control unit can be asked by the driver to calibrate its own parameters while he/she manually drives for a few minutes (learning mode). After calibration, the control unit switches to the running mode where the learned driving style is applied. The learning mode can be activated by any driver of the car, for any driving session and each time he/she wishes to change the current driving behaviour of the cruise control system.The modelling framework which we propose to implement comprises four layers (sampler, profiler, tutor, performer). The sampler is responsible for human likeness and can be calibrated while in learning mode. Then, while in running mode, it works together with the other modelling layers to implement the logic. This paper presents the overall framework, with particular emphasis on the sampler and the profiler that are explained in full mathematical detail. Specification and calibration of the proposed framework are supported by the observed data, collected by means of an instrumented vehicle. The data are also used to assess the proposed framework, confirming human-like and fully-adaptive characteristics.     

A rule-based neural network approach to model driver naturalistic behavior in traffic

This paper proposes a rule-based neural network model to simulate driver behavior in terms of longitudinal and lateral actions in two driving situations, namely car-following situation and safety critical events. A fuzzy rule based neural network is constructed to obtain driver individual driving rules from their vehicle trajectory data. A machine learning method reinforcement learning is used to train the neural network such that the neural network can mimic driving behavior of individual drivers. Vehicle actions by neural network are compared to actions from naturalistic data. Furthermore, this paper applies the proposed method to analyze the heterogeneities of driving behavior from different drivers’ data.Driving data in the two driving situations are extracted from Naturalistic Truck Driving Study and Naturalistic Car Driving Study databases provided by the Virginia Tech Transportation Institute according to pre-defined criteria. Driving actions were recorded in instrumented vehicles that have been equipped with specialized sensing, processing, and recording equipment.     

Weather and road geometry impact on longitudinal driving behavior: Exploratory analysis using an empirically supported acceleration modeling framework

The objective of this paper is to quantify and characterize driver behavior under different roadway geometries and weather conditions. In order to explore how a driver perceives the rapidly changing driving surrounding (i.e. different weather conditions and road geometry configurations) and executes acceleration maneuvers accordingly, this paper extends a Prospect Theory based acceleration modeling framework. A driving simulator is utilized to conduct 76 driving experiments. Foggy weather, icy and wet roadway surfaces, horizontal and vertical curves, and different lane and shoulder widths are simulated while having participants driving behind a yellow cab at speeds/headways of their choice. After studying the driving trends observed in the different driving experiments, the extended Prospect Theory based acceleration model is calibrated using the produced trajectory data. The extended Prospect Theory based model parameters are able to reflect a change in risk-perception and acceleration maneuvering when receiving different parameterized exogenous information. The results indicate that drivers invest more attention and effort to deal with the roadway challenges compared to the effort to deal with the weather conditions. Moreover, the calibrated model is used to simulate a highway segment and observe the produced fundamental diagram. The preliminary results suggest that the model is capable of capturing driver behavior under different roadway and weather conditions leading to changes in capacity and traffic disruptions.     

Personalised feedback and eco-driving: An explorative study

Conventional road transport has negative impact on the environment. Stimulating eco-driving through feedback to the driver about his/her energy conservation performance has the potential to reduce CO₂ emissions and promote fuel cost savings. Not all drivers respond well to the same type of feedback. Research has shown that different drivers are attracted to different types of information and feedback. The goal of this paper is to explore which different driver segments with specific psychographic characteristics can be distinguished, how these characteristics can be used in the development of an ecodriving support system and whether tailoring eco-driving feedback technology to these different driver segments will lead to increased acceptance and thus effectiveness of the eco feedback technology. The driver segments are based on the value orientation theory and learning orientation theory. Different possibilities for feedback were tested in an exploratory study in a driving simulator. An explorative study was selected since the choice of the display (how and when the information is presented) may have a strong impact on the results. This makes testing of the selected driver segments very difficult. The results of the study nevertheless suggest that adapting the display to a driver segment showed an increase in acceptance in certain cases. The results showed small differences for ratings on acceptation, ease of use, favouritism and a lower general rating between matched (e.g., learning display with learning oriented drivers) and mismatched displays (e.g., learning display with performance oriented drivers). Using a display that gives historical feedback and incorporates learning elements suggested a non-verifiable increase in acceptance for learning oriented drivers. However historical feedback and learning elements may be less effective for performance oriented drivers, who may need comparative feedback and game elements to improve energy conserving driving behaviour.     

Variability in urban driving patterns

Although it is known that driving patterns strongly affect the emission of pollutants from vehicles, existing empirical knowledge about driving patterns is limited. The first-step in this project was to find relevant parameters for describing driving patterns. These served as a basis for investigating variations in such patterns. An experimental study was carried out to compare driving patterns between and within different street-types, drivers and traffic conditions. Data were analysed using general factorial analysis of variance. Driving patterns showed very significant differences between street type and driver, and these factors had significant impact on all the parameters employed. The effect of street type was generally higher than the driver effect. Average speed and deceleration levels were lower at peak hours compared to off-peak hours. Men had higher acceleration levels than women generally and specially on one street type. The study showed no major differences in average speed for gender except for one street type where men drove faster than women. The knowledge attained in this study may be a step towards a better knowledge of driving patterns and their variation, and may provide possibilities of changing driving patterns and thus exhaust emissions from vehicles. Knowledge about driving patterns is also an essential part in efforts to improve models to calculate emission from traffic in urban environment.     

Education of truck drivers using the assist driver support system ‐a pilot survey‐

We have developed a driver support system, ASSIST, to decrease automobile driving accidents. Most traffic accidents involve collisions of two objects. A collision occurs when a vehicle's headway is shorter than the stopping distance. Therefore, we plan to warn the driver when the vehicle's headway is shorter than the estimated stopping distance. This driver support system performs exactly that task. Results of experiments verify that this system increases that distance gap by warning the driver to increase the headway.     

Method for investigating intradriver heterogeneity using vehicle trajectory data: A Dynamic Time Warping approach

After first extending Newell’s car-following model to incorporate time-dependent parameters, this paper describes the Dynamic Time Warping (DTW) algorithm and its application for calibrating this microscopic simulation model by synthesizing driver trajectory data. Using the unique capabilities of the DTW algorithm, this paper attempts to examine driver heterogeneity in car-following behavior, as well as the driver’s heterogeneous situation-dependent behavior within a trip, based on the calibrated time-varying response times and critical jam spacing. The standard DTW algorithm is enhanced to address a number of estimation challenges in this specific application, and a numerical experiment is presented with vehicle trajectory data extracted from the Next Generation Simulation (NGSIM) project for demonstration purposes. The DTW algorithm is shown to be a reasonable method for processing large vehicle trajectory datasets, but requires significant data reduction to produce reasonable results when working with high resolution vehicle trajectory data. Additionally, singularities present an interesting match solution set to potentially help identify changing driver behavior; however, they must be avoided to reduce analysis complexity.