Uncertainty analysis of propulsion shafting vibration北大核心CSCD

［Objective］In view of the insufficient safety and reliability of the traditional deterministic vibration analysis of ship propulsion shafting system, the vibration response analysis of the shafting system under uncertain excitation conditions is carried out. ［Methods］Using non-random vibration analysis based on non-probabilistic convex model process, the uncertain excitation and vibration response are described in the form of the upper and lower bounds of the interval to reduce dependence on a large amount of excitation sample data. Compared with the calculation results in the relevant literature, the validity of the program for solving the response bound of the two-degrees-of-freedom (2-DOFs) system is verified, and the uncertain vibration problem of the shafting system is then explored on this basis. ［Results］The results show that when the shafting system is excited by [−30 N, 30 N] propeller laterally, a displacement response of the magnitude of about 10−6 m is generated at the bearing. It is also indicate that the shafting system is excited in a certain interval, so a certain interval response must be produced. ［Conclusions］Applying the non-probabilistic convex model process and non-random vibration analysis to the field of the uncertain vibration analysis of ship propulsion shafting system, the vibration displacement response bound of the shafting under uncertain excitation conditions can be obtained with fewer excitation samples, thereby providing useful references for improving the robustness of the dynamic response prediction of ship propulsion shafting systems. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Parameter optimization and parametric deviation influence for shock resistance of double-stage vibration isolation system with limiters北大核心CSCD

［Objectives］For marine nuclear power plants, the relative displacement of the pump supported by a vibration isolation system should be strictly restricted. In order to improve the shock resistance of a vibration isolation system with displacement limiters, the parameter optimization and parametric deviation influence are studied. ［Methods］The theoretical model of a double-stage vibration isolation system with typical limiter parameters is established, the analysis of the shock response characteristics of the system is carried out using the direct integration method, the optimal limiter parameters are obtained using a genetic algorithm, and the influence of parameter deviation on the shock resistance of the system is studied. ［Results］Limiter parameters significantly affect the shock response characteristics of the vibration isolation system. The optimal limiter parameters improve the shock resistance of the system, but parameter deviation has a great influence on shock resistance. Based on the influence of parameter deviation, a deviation control strategy is proposed in which the elastic parameter should have a positive deviation and the gap parameter a negative deviation. The simulation results show that the proposed strategy can effectively alleviate the shock resistance degradation caused by deviation.［Conclusions］The results of this study can be used to guide the design, manufacturing and variation control of limiters for vibration isolation systems. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Numerical evaluation method of lightning rod protection probability北大核心CSCD

［Objectives］Aiming at the current situation in which it is difficult to efficiently evaluate protection probability through traditional lightning rod evaluation methods, an efficient numerical evaluation algorithm is developed on the basis of an electrogeometric model (EGM) and attractive volume to realize the efficient calculation of lightning protection probability at any point in space.［Methods］This method first determines the attractive volume boundary of the lightning rod and protection object according to the interception process of the upward and downward leaders. The collection surface and exposure arc of the lightning stroke distance are then calculated, enabling the attractive risk and interception effect of the lightning rod to be quantified. Finally, the attraction and interception characteristics of the lightning rod are integrated to establish a numerical evaluation model of protection probability. To verify the accuracy of this method, the general rule of lightning rod protection probability is analyzed and the results compared with the existing analysis method.［Result］The evaluation results of this method show good agreement with those of classical leader progression model (LPM) theory.［Conclusions］ The method proposed herein has a high degree of quantification and can realize the efficient calculation of lightning protection probability at any point in space, which can provide useful references for lightning protection design work. © 2023 Authors. All rights reserved.     

Experimental research on dynamic responses characteristics and influence laws of gear transmission-propulsion system under gear excitation北大核心CSCD

［Objective］In order to study the dynamic response characteristics and influence laws of a marine gear transmission-propulsion system, a series of bench tests is carried out.［Methods］First, a biaxial gear transmission-propulsion system test bench including a cross connection gear is built. Experiments to test the acceleration response of the gearbox body and propulsion shaft system are then carried out, and the influence of speed, driving mode, axial static thrust, axial dynamic excitation force from the propeller and other factors on the dynamic response characteristics of the system are compared and analyzed. ［Results］The experimental results show that the transmission law of the vibration acceleration response of the gear transmission-propulsion system is mainly at the meshing frequency and its multipliers, as well as peaks in the low frequency band of 30–80 Hz under certain working conditions. ［Conclusion］This study can provide technical support for the vibration and noise reduction design of gear transmission-propulsion systems. © 2022 Journal of Clinical Hepatology. All rights reserved.     

带吊舱水下机器人运动建模与仿真(英文)

To provide a simulation system platform for designing and debugging a small autonomous underwater vehicle’s (AUV) motion controller, a six-degree of freedom (6-DOF) dynamic model for AUV controlled by thruster and fins with appendages is examined. Based on the dynamic model, a simulation system for the AUV’s motion is established. The different kinds of typical motions are simulated to analyze the motion performance and the maneuverability of the AUV. In order to evaluate the influences of appendages on the motion performance of the AUV, simulations of the AUV with and without appendages are performed and compared. The results demonstrate the AUV has good maneuverability with and without appendages.     

Safety assessment for a side-by-side offloading mooring system

In order to improve the safety properties of an offloading system with side-by-side (SBS) mooring in which the FPSO is moored by a yoke system in the field of BZ25-1, it is necessary to analyze those properties. According to the experience of similar projects, tow strategies of different offloading arrangements were discussed by using the 3-D radiation/diffraction theory and quasi-static time domain method to assess their respective safety properties. Through the safety assessment analysis of different arrangement comparisons, various ways to improve the safety properties of offloading systems with side-by-side mooring were verified by analyzing the tension in the mooring lines and the fender deflection. Through comparison it can be concluded that by enlarging the key factors properly, including the size of the fenders and the hawsers as well as the number of hawsers, a better safety performance can be achieved.     

船舶进水应急风险评估DCEFM模型（英文）

This paper proposes a risk assessment model considering danger zone, capsizing time, and evaluation time factors(DCEFM)to quantify the emergency risk of ship inflow and calculate the degree of different factors to the emergency risk of water inflow. The DCEFM model divides the water inflow risk factors into danger zone, capsizing time, and evacuation time factors. The danger zone, capsizing time, and evacuation factors are calculated on the basis of damage stability probability,the numerical sim...     

Asymmetric regular sampling SPWM method based on tangent-secant midpoint approximation applied to intermediate frequency inverter power supply北大核心CSCD

［Objective］In order to reduce the switching frequency of an intermediate frequency inverter power supply, ensure the quality of the output waveform and realize digitalization easily, a SPWM sampling method based on a tangent-secant midpoint approximation is proposed. ［Methods］It is proven by deduction that the quantitative relationship of the natural sampling method can be approximated, and a Matlab/Simulink simulation model is built. The algorithm is designed and applied to an intermediate frequency inverter device, and the correctness of the proposed method is verified in the two aspects of simulation and experiment. ［Results］The simulation results show that the total harmonic distortion (THD) of the output waveform based on the tangent-secant midpoint approximation method is 2.64%, lower than the 3.99% of the symmetrical regular sampling method. The waveform quality of the tangent-secant midpoint approximation method is obviously better than that of the symmetrical regular sampling method, as it not only reduces the switching frequency but also takes into account the requirements of THD. ［Conclusions］SPWM sampling based on tangent-secant midpoint approximation is applied to the intermediate frequency power supply and is able to effectively overcome the shortcomings of the low-quality output waveform and high switching frequency of the symmetrical regular sampling method. Both theoretical analysis and engineering practice verify the rationality and correctness of the proposed method, and it can be widely extended to the field of intermediate frequency power supply installation. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Applying a semantic information Petri Net modeling method to AUV systems design

This paper informally introduces colored object-oriented Petri Nets(COOPN) with the application of the AUV system.According to the characteristic of the AUV system's running environment,the object-oriented method is used in this paper not only to dispart system modules but also construct the refined running model of AUV system,then the colored Petri Net method is used to establish hierarchically detailed model in order to get the performance analyzing information of the system.After analyzing the model implementation,the errors of architecture designing and function realization can be found.If the errors can be modified on time,the experiment time in the pool can be reduced and the cost can be saved.     

Experimental research on dynamic vibration absorber with negative stiffness for longitudinal vibration control of propulsion shafting system北大核心CSCD

［Objectives］In order to control the first longitudinal vibration mode of propulsion shafting systems, a dynamic vibration absorber with disc spring negative stiffness is proposed and its experimental verification carried out. ［Methods］A test bench is established for the propulsion shafting system containing a dynamic vibration absorber with negative stiffness. According to the first longitudinal vibration mode of the shafting, a dynamic vibration absorber with negative stiffness integrated into the thrust bearing is developed. Vibration transmission tests under different rotational speeds, static thrusts and negative stiffness are then carried out, and acceleration response data on the thrust bearing foundation and shafting is obtained. ［Results ］ The results show that the developed dynamic vibration absorber with negative stiffness can achieve vibration suppression of 7.8 dB for the thrust bearing foundation in the first longitudinal mode of the propulsion shafting with a mass ratio of 1.6%, and the vibration control effect of the negative stiffness dynamic vibration absorber is maintained at 3.3 dB when the natural frequency changes by 5% and the thrust changes by 40%. The vibration response on the thrust bearing foundation and shafting do not deteriorate even at non-optimal negative stiffness. ［Conclusions］This study shows that a dynamic vibration absorber with negative stiffness can effectively suppress vibration transmission at the first longitudinal mode of a shafting under different rotational speeds. © 2023 Authors. All rights reserved.     

Bandgap optimization for chiral acoustic metamaterials based on material selection method北大核心CSCD

［Objectives］This study seeks to expand the bandgap frequency band, reduce the bandgap starting frequency and analyze and optimize the bandgap parameters of acoustic metamaterials. ［Methods］The influence of geometrical and material parameters on the bandgap properties of acoustic metamaterials is analyzed, and a method for maximizing the bandgap width is proposed. The multi-objective optimization problem is converted into a single objective optimization problem by normalizing the bandgap frequency coefficients. Structural material conversion is achieved via the material selection optimization method, and the optimization equations of bandgap parameters are established on the basis of weight-lightening. For chiral acoustic metamaterials, the material properties (density and wave velocity) and geometric parameters (scatterer diameter, ligament thickness and coating thickness) are defined as design variables, and the comprehensive optimization of structural parameters and material selection of acoustic metamaterials based on weight-lightening are implemented. ［Results］The optimization results show that the bandgap width increases by 27.7% and the lower bound frequency decreases by 1048 Hz, thereby achieving the goal of expanding the bandgap width based on lightweight acoustic metamaterials. The acoustic transmission analysis of the finite chiral acoustic metamaterial structure is then carried out to verify the effectiveness of the proposed method. ［Conclusions］The results show that the goal of lightweight acoustic metamaterials can be effectively achieved by integrating the comprehensive optimization of structural parameters and materials. As such, this study provides references for the design of new-type acoustic metamaterials. © 2023 Authors. All rights reserved.     

Influence of external restraint distribution on welding buckling of thin plate butt joint北大核心CSCD

［Objectives］It is easy to produce buckling distortion when welding thin plate butt joints, which affects the construction period, cost and performance, but this can be controlled by applying external restraints. ［Methods ］ First, a butt welding test of a thin plate under external restraints is carried out, and the out-of-plane deformation is measured by the optical surface scanning method. At the same time, finite element (FE) models in a free state and external restraint state are established, and the thermal mechanical phenomena of the two models are subjected to thermal-elastic-plastic FE analysis (TEP FE). The influence of different external restraint distributions on the welding buckling distortion of the joints is then studied, and reasons for controlling welding buckling distortion are analyzed from the perspective of longitudinal plastic strain and longitudinal contraction force.［Results ］ The out-of-plane deformation of the corresponding model is in good agreement with the measured results, and milder than the out-of-plane deformation of the model in a free state. When external restraints are applied, the longitudinal plastic strain of the weld and its adjacent metal decreases, and the longitudinal contraction force of the thin plate also decreases.［Conclusions ］ The results verify that external restraints can effectively control welding buckling distortion, and the control effects are different depending on the external restraint distribution. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Numerical analysis of transient fluid-structure interaction of warship impact damage caused by underwater explosion using the FSLAB北大核心CSCD

［Objectives］This paper aims to address the numerical simulation problems of the dynamic response of ships subject to near-, medium- and far-field underwater explosions by establishing several numerical methods and calculation models. ［Methods］First, load and fluid-structure interaction models are established on the basis of the Eulerian finite element method and acoustic finite element method using the field-split technique, and FSLAB fluid-structure interaction software is developed. Next, near-, medium- and far-field underwater explosions are numerically simulated respectively. The shock wave propagation law, bubble shape and load evolution characteristics of near free-surface and near-wall underwater explosions are obtained, and the shock response characteristics of a spherical shell and ship subject to far-field underwater explosions are analyzed. Finally, the FSLAB software results are compared with the analytical solutions, reference solutions and experimental data. ［Results］The results show that the FSLAB fluid-structure interaction software developed in this paper is effective and accurate in simulating the impact damage of underwater explosions on warships. ［Conclusion］This study can provide a basis and support for the power assessment of underwater anti-explosion and shock design of warships. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Multi-objective optimization study on dimensions of medium-sized cruise ship in concept phase北大核心CSCD

［Objective］Aiming at the problem of too many influencing factors and too little reference data for determining the dimensions of medium-sized cruise ships in the concept phase, a simplified multi-objective optimization method based on the fitting of dimensions and performance is proposed. ［Method］First, the dimension relations of medium-sized cruise ships are analyzed and the influence of the latest SOLAS requirements used to determine the optimization range. Second, the influence of cruise ship dimensions on space, resistance, stability and seakeeping are analyzed. Next, based on the principles of genetic algorithms, a multiobjective optimization algorithm with high robustness and high engineering adaptability is determined to establish a multi-objective optimization model for the concept design of medium-sized cruise ships. Finally, the Pareto solution obtained by multi-objective optimization is analyzed to provide initial references for determining the dimensions of the target cruise ship. ［Results］Implemented via a genetic algorithm, the optimization program proposed herein is applied in the concept design of a medium-sized cruise ship in order to optimize the initial dimensions, thereby achieving the expected outcome of providing reasonable initial dimensions for cruise ship design. ［Conclusion ］ The proposed simplified multi-objective optimization model can provide feasible initial dimensions for medium-sized cruise ships in the concept phase. As the Pareto solution obtained by multi-objective optimization has different focuses such as resistance and stability, the most suitable solution needs to be selected according to the design object. © 2023 Chinese Journal of Ship Research. All rights reserved.     

基于三维波浪水池方法的浮体气隙估计方法研究（英文）

Computations for air gap response of a semisubmersible platform based on a 3D numerical wave tank approach are presented.The developed method is in time domain and can consider nonlinearities associated with incident wave and hydrostatic forces exactly in determining the body response, but the interaction hydrodynamics of radiation and diffraction are based on simplified linearization assumptions. The incident wave can be defined by any suitable wave theory and here defined by a fully nonlinear numerical wave model. After verifying the present computations results in its degenerated linearized version against the usual linear 3D Green function–based frequency-domain results for air gap predictions, systematic comparative studies are undertaken between linear and the approximate nonlinear solutions. It is found that nonlinear computations can yield considerably conservative predictions as compared to fully linear calculations, amounting to a difference of up to 30%–40% in the minimum air gap in steep ambient incident waves at high and moderate frequencies.     

Constructal design of tree-shaped microchannel disc heat sink with wavy walls北大核心CSCD

［Objective］To meet the efficient thermal management needs of electronic devices such as ships and underwater vehicles, this study focuses on the constructal design of a tree-shaped microchannel disc heat sink with wavy walls. ［Method］A design prototype of the heat sink with wavy walls is first proposed. Based on constructal theory, the amplitude and wavelength of the wavy walls are designed under the constraints of fixed heat sink volume and fixed microchannel volume by maximizing the comprehensive performance evaluation criteria (PEC) while considering both heat transfer and flow pressure drop. ［Results］The results show that the wavy walls increase the heat transfer surface areas and generate vortices in their cavities, effectively reducing the maximum temperature. When the inlet Reynolds number is fixed at 700, 900 or 1100 respectively, the maximum temperature is reduced by 13.5 K by increasing the amplitude of the wavy walls, while the pressure drop increases significantly; and the maximum temperature is reduced by 4.7 K by reducing the wavelength of the wavy walls, while the pressure drop increases slightly. There are optimal amplitudes that raise the comprehensive performance evaluation criteria to extreme values for given larger wavelengths, while the comprehensive performance evaluation criteria increase monotonously as the amplitude increases for given smaller wavelengths. ［Conclusion］Wavy walls can significantly improve the thermal performance of tree-shaped microchannel disc heat sinks, and the use of constructal design can realize optimal geometric constructs with optimal comprehensive performance evaluation criteria. © 2023 Authors. All rights reserved.     

考虑到船舶机动性和会遇情况的一种新的面向船舶领域的船舶碰撞风险参数（英文）

The identification of ship collision risks is an important element in maritime safety and management. The concept of the ship domain has also been studied and developed since it was proposed. Considering the existing trend that the ship domain is increasingly widely used in collision risk-related research, a new domain-oriented collision risk factor, i.e., the current state of domain(CSD), is introduced in this paper, which can effectively reflect the current state and show a certain predictabil...     

Mathematical modelling of response amplitude operator for roll motion of a floating body: Analysis in frequency domain with numerical validation

This paper investigates mathematical modelling of response amplitude operator （RAO） or transfer function using the frequency-based analysis for uncoupled roll motion of a floating body under the influence of small amplitude regular waves. The hydrodynamic coefficients are computed using strip theory formulation by integrating over the length of the floating body. Considering sinusoidal wave with frequency （ω ） varying between 0.3 rad/s and 1.2 rad/s acts on beam to the floating body for zero forward speed, analytical expressions of RAO in frequency domain is obtained. Using the normalization procedure and frequency based analysis, group based classifications are obtained and accordingly governing equations are formulated for each case. After applying the fourth order Runge-Kutta method numerical solutions are obtained and relative importance of the hydrodynamic coefficients is analyzed. To illustrate the roll amplitude effects numerical experiments have been carried out for a Panamax container ship under the action of sinusoidal wave with a fixed wave height. The effect of viscous damping on RAO is evaluated and the model is validated using convergence, consistency and stability analysis. This modelling approach could be useful to model floating body dynamics for higher degrees of freedom and to validate the result.     

考虑内流和海床作用的柔性立管和钢悬链线立管非线性分析(英文)

Flexible risers and steel catenary risers often provide unique riser solutions for today’s deepwater field development. Accurate analysis of these slender structures, in which there are high-speed HP/HT internal flows, is critical to ensure personnel and asset safety. In this study, a special global coordinate-based FEM rod model was adopted to identify and quantify the effects of internal flow and hydrostatic pressure on both flexible and deepwater steel catenary risers, with emphasis on the latter. By incorporating internal flow induced forces into the model, it was found that the internal flow contributes a new term to the effective tension expression. For flexible risers in shallow water, internal flow and hydrostatic pressure made virtually no change to effective tension by merely altering the riser wall tension. In deep water the internal pressure wielded a dominant role in governing the riser effective tension and furthering the static configuration, while the effect of inflow velocity was negligible. With respect to the riser seabed interaction, both the seabed support and friction effect were considered, with the former modeled by a nonlinear quadratic spring, allowing for a consistent derivation of the tangent stiffness matrix. The presented application examples show that the nonlinear quadratic spring is, when using the catenary solution as an initial static profile, an efficient way to model the quasi-Winkler-type elastic seabed foundation in this finite element scheme.