具有化学废热回收功能的船舶推进系统效率分析（英文）

One of the basic ways to reduce polluting emissions of ship power plants is application of innovative devices for on-board energy generation by means of secondary energy resources. The combined gas turbine and diesel engine plant with thermochemical recuperation of the heat of secondary energy resources has been considered. It is suggested to conduct the study with the help of mathematical modeling methods. The model takes into account basic physical correlations, material and thermal balances, phase equilibrium, and heat and mass transfer processes. The paper provides the results of mathematical modeling of the processes in a gas turbine and diesel engine power plant with thermochemical recuperation of the gas turbine exhaust gas heat by converting a hydrocarbon fuel. In such a plant, it is possible to reduce the specific fuel consumption of the diesel engine by 20%. The waste heat potential in a gas turbine can provide efficient hydrocarbon fuel conversion at the ratio of powers of the diesel and gas turbine engines being up to 6. When the diesel engine and gas turbine operate simultaneously with the use of the LNG vapor conversion products, the efficiency coefficient of the plant increases by 4%–5%.     

液化天然气海运船舶能效设计指数研究(英文)

This paper describes the characteristics of liquefied natural gas(LNG) carriers briefly. The LNG carrier includes power plant selection, vapor treatment, liquid cargo tank type, etc. Two parameters—fuel substitution rate and recovery of boil of gas(BOG) volume to energy efficiency design index(EEDI) formula are added, and EEDI formula of LNG carriers is established based on ship EEDI formula. Then, based on steam turbine propulsion device of LNG carriers, mathematical models of LNG carriers' reference line value are established in this paper. By verification, the EEDI formula of LNG carriers described in this paper can provide a reference for LNG carrier EEDI calculation and green shipbuilding.     

Research on Energy Efficiency Design Index for Sea-going LNG Carriers

This paper describes the characteristics of liquefied natural gas （LNG） carriers briefly. The LNG carrier includes power plant selection, vapor treatment, liquid cargo tank type, etc. Two parameters fuel substitution rate and recovery of boil of gas （BOG） volume to energy efficiency design index （EEDI） formula are added, and EEDI formula of LNG carriers is established based on ship EEDI formula. Then, based on steam turbine propulsion device of LNG carriers, mathematical models of LNG carriers＇ reference line value are established in this paper. By verification, the EEDI formula of LNG carriers described in this paper can provide a reference for LNG carrier EEDI calculation and green shipbuilding.     

LNG Bunkering Station Construction in Full Swing

In recent years,Chinese government’s policy support to the LNG-powered ship has been constantly increasing.The"Guidance on speeding up LNG fuel application in the shipping industry"has been issued with an intent to reserve a portion of fund for ship modification from the 1.5 billion Yuan special fund for energy-saving and emission reduction,so that 200m Yuan subsidies could be made available by the means of"award instead of subsidy".Meanwhile,the guidance determines that the highest price of LNG should not exceed 75%of the fuel oil price.     

集装箱船双燃料发动机投资的环境与经济评价（英文）

In this study, environmental and economic examinations of Liquefied Natural Gas(LNG) investments are conducted. A year-long noon report data is received from a container ship and LNG conversion is performed. Savings from both the fuel expenses and the amount of the emissions are calculated and presented. To eliminate the fuel consumption uncertainties in future operation periods of the stated ship, different scenarios that simulate various fuel consumption statuses are created and analyzed withi...     

CCS:Pioneer for LNG Ship Standard

Although China is relatively late in the trial use of LNG ships,she has become the front runner in the promotion of LNG ships.The launch of China’s first LNG/diesel hybrid pilot inland waterway ship in 2010 became the prelude for the application of LNG as bunker fuel for water transportation.At present,with the speeding up of the layout of LNG stations of energy companies,and the increase of the government’s policy support,there is the trend of fast development of"oil converted to     

双螺旋转子波浪能发电装置的仿真与优化（英文）

This paper presents a new type of double-helical rotor wave energy converter(WEC), which consists of two isolated sets of helical rotor structures(inner and outer). This device can generate electricity by using the rising and falling energy of a wave. The rotors are simulated and optimized by Fluent. Each rotor’s blades are simulated and analyzed, which are separately changed in terms of helix angle, shape, and thickness. The simulation result shows that, for both inner and outer helical rotors,...     

船舶SOFC燃料电池与汽轮机联合动力装置能效分析(英文)

Strong restrictions on emissions from marine power plants(particularly SOx,NOx)will probably be adopted in the near future.In this paper,a combined solid oxide fuel cell(SOFC)and steam turbine fuelled by natural gas is proposed as an attractive option to limit the environmental impact of the marine sector.The analyzed variant of the combined cycle includes a SOFC operated with natural gas fuel and a steam turbine with a single-pressure waste heat boiler.The calculations were performed for two types of tubular and planar SOFCs,each with an output power of 18 MW.This paper includes a detailed energy analysis of the combined system.Mass and energy balances are performed not only for the whole plant but also for each component in order to evaluate the thermal efficiency of the combined cycle.In addition,the effects of using natural gas as a fuel on the fuel cell voltage and performance are investigated.It has been found that a high overall efficiency approaching 60%may be achieved with an optimum configuration using the SOFC system.The hybrid system would also reduce emissions,fuel consumption,and improve the total system efficiency.     

Experimental research on spray and combustion characteristics of the third generation conical spray

A new generation conical spray system for conventional diesel engines or premixed combustion diesel engines is introduced. By means of oriented impingement method, flexible spray penetration in design is realized. High-speed photograph was used to investigate the spatial distribution characteristics of the new spray for cases of different impingement angles and needle valve opening pressures. The results show that, by applying spray impingement orientation, fuel jets spread along the cone surface as shape of sectors, so the dispersion of jets is increased obviously. Changing on impingement angle leads to variation of penetration, which is critical in homogeneous mixture preparation. Due to the flexibility of spray penetration in design, the spray impingement on liner is avoided in a great extent. The results also indicate that higher needle valve opening pressure results in longer penetration and larger spray angle after impingement. Combustion characteristics of the impinged conical spray were studied in the 1135 type diesel engine. The new impinged conical spray system work smoothly in full load range with better fuel economy and lower emissions of NOx and soot than the original test engine.     

The use of hydrogen as a fuel for inland waterway units

Escalating apprehension about the harmful effects of widespread use of conventional fossil fuels in the marine field and in internal combustion engines in general, has led to a vast amount of efforts and the directing of large capital investment towards research and development of sustainable alternative energy sources. One of the most promising and abundant of these sources is hydrogen. Firstly, the use of current fossil fuels is. discussed focusing on the emissions and economic sides to emphasize the need for a new, cleaner and renewable fuel with particular reference to hydrogen as a suitable possible alternative. Hydrogen properties, production and storage methods are then reviewed along with its suitability from the economical point of view. Finally, a cost analysis for the use of hydrogen in internal combustion engines is carried out to illustrate the benefits of its use as a replacement for diesel. The outcome of this cost analysis shows that 98% of the capital expenditure is consumed by the equipment, and 68.3% of the total cost of the equipment is spent on the solar photovoltaic cells. The hydrogen plant is classified as a large investment project because of its high initial cost which is about 1 billion US$; but this is justified because hydrogen is produced in a totally green way. When hydrogen is used as a fuel, no harmful emissions are obtained.     

浮式海上风力机运动性能和锚泊系统(英文)

The development of offshore wind farms was originally carried out in shallow water areas with fixed(seabed mounted) structures.However,countries with limited shallow water areas require innovative floating platforms to deploy wind turbines offshore in order to harness wind energy to generate electricity in deep seas.The performances of motion and mooring system dynamics are vital to designing a cost effective and durable floating platform.This paper describes a numerical model to simulate dynamic behavior of a new semi-submersible type floating offshore wind turbine(FOWT) system.The wind turbine was modeled as a wind block with a certain thrust coefficient,and the hydrodynamics and mooring system dynamics of the platform were calculated by SESAM software.The effect of change in environmental conditions on the dynamic response of the system under wave and wind loading was examined.The results indicate that the semi-submersible concept has excellent performance and SESAM could be an effective tool for floating wind turbine design and analysis.     

螺旋桨桨叶宽度的双目视觉测量方法(英文)

Propeller blade width measurement has been extensively studied in the past using direct and indirect methods, and it plays a great role in determining the quality of the finished products. It has surveyed that previous techniques are usually time-consuming and erroneous due to a large number of points to be processed in blade width measurement. This paper proposes a new method of measuring blade width using two images acquired from different viewpoints of the same blade. And a new feature points matching approach for propeller blade image is proposed in stereo vision measurement. Based on these, pixel coordinates of contour points of the blade in two images are extracted and converted to real world coordinates by image algorithm and binocular stereo machine vision theory. Then, from the real world coordinates, the blade width at any position can be determined by simple geometrical method.     

考虑到船舶机动性和会遇情况的一种新的面向船舶领域的船舶碰撞风险参数（英文）

The identification of ship collision risks is an important element in maritime safety and management. The concept of the ship domain has also been studied and developed since it was proposed. Considering the existing trend that the ship domain is increasingly widely used in collision risk-related research, a new domain-oriented collision risk factor, i.e., the current state of domain(CSD), is introduced in this paper, which can effectively reflect the current state and show a certain predictabil...     

基于模糊集合的船舶燃气轮机临界因素的Dematel评估方法（英文）

In power production, gas turbines are commonly used components that generate high amount of energy depending on size and weight. They function as integral parts of helicopters, aircrafts, trains, ships, electrical generators, and tanks. Notably, many researchers are focusing on the design, operation, and maintenance of gas turbines. The focal point of this paper is a DEMATEL approach based on fuzzy sets, with the attempt to use these fuzzy sets explicitly. Using this approach, the cause–effect diagram of gas turbine failures expressed in the literature is generated and aimed to create a perspective for operators. The results of the study show that, "connecting shaft has been broken between turbine and gear box" selected the most important cause factor and"sufficient pressure fuel does not come for fuel pump" is selected the most important effect factor, according to the experts.     

Cold Winter Warmed by New Energy Vessels

Eco-environment protection was given an unprecedented emphasis at the 18th National People's Congress meeting.At the same time,with the continuous increase of fuel price and the introduction of stricter emission control regulations as well as shipping industry's focus on environmental protection,application of new energy on ships has attracted more and more attention.Investment from various parties is increasing,and some scientific research projects and real vessels that are relatively mature have emerged.     

Decarbonization of Ship Operations

<正>The need to reduce the trends associated with climate change imposes measures to reduce the emissions of greenhouse gases to the atmosphere and increase the efficiency of the use of energy. The International Maritime Organization(IMO) has been active since 1997 in promoting the implementation of measures that lead to more efficient ship operation with less fuel consumption and less emissions(Tadros et al., 2023a). The measures include improved ship design and improved operational practi...     

TLP型风力机的空气动力学影响及发电预测(英文)

This research proposes a new offshore wind energy generation system that uses a tension leg platform (TLP) and describes experiments performed on a TLP type wind turbine in both waves and wind. The following conclusions can be made from the results of this research. 1) In the case of coexisting wave-wind fields, the wind effect stabilizes the pitch motion. 2) The wind effect decreases vibration of the mooring lines when waves and wind coexist. In particular, the springing (2nd or 3rd order force) also decreases in this field. 3) It can be estimated that the reduction in the rate of generation of electrical power can be up to about 6% as a result of the heel angle. In addition, the annual amount of electricity generated was estimated along with the utilization factor based on the experimental results.     

A new method of demodulating the digital frequency modulation signals

A new method of estimating the frequency-known signals from the strong background noise was presented first. Then the new method was used in the demodulation of the digital frequency modulation (FSK) signals. The new demodulation method can complete the demodulation of the FSK signals only with the carrier frequency and without any carrier phase information.The simulation results show that the performance of anti-noise of the new method is better than that of the incoherent demodulation method and the fluctuation of the carrier phase has little effect on the new method. So the new demodulation method has a fine prospect in the practical applications.     

由多孔介质注射的微气泡和气层对减小自航驳船模型拖曳力效果的比较研究（英文）

Ship resistance issues are related to fuel economy, speed, and cost efficiency. Air lubrication is a promising technique for lowering hull frictional resistance as it is supposed to modify the energy in the turbulent boundary layer and thereby reduce hull friction. In this paper, the objective is to identify the optimum type of air lubrication using microbubble drag reduction(MBDR)and air layer drag reduction(ALDR) techniques to reduce the resistance of a 56-m Indonesian self-propelled barge(SPB). A model with the following dimensions was constructed: length L = 2000 mm, breadth B = 521.60 mm, and draft T = 52.50 mm.The ship model was towed using standard towing tank experimental parameters. The speed was varied over the Froude number range 0.11–0.31. The air layer flow rate was varied at 80, 85, and 90 standard liters per minute(SLPM) and the microbubble injection coefficient over the range 0.20–0.60. The results show that the ship model using the air layer had the highest drag reduction up to a maximum of 90%. Based on the characteristics of the SPB, which operates at low speed, the optimum air lubrication type to reduce resistance in this instance is ALDR.