Individual and Private Sector Contributes 18.3 Percent of the GDP

China's individual and private economic sector has developed in the tide of reform and opening-up. According to the estimation of the National Bureau of Statistics, in 2000 the individual and private sector created 1,497.5 billion yuan in the GDP, accounting for 18.3 percent of the national total. The sector has developed from a supplement to the national economy at the beginning to a major component of the socialist market economy. The employees of individual and private businesses are "buildings of the cause of     

空泡闭合区压力特性试验研究(英文)

The most complicated component in cavitating flow and pressure distribution is the flow in the cavity closure line. The cavitating flow and pressure distribution provide critical aspects of flow field details in the region. The integral of pressure results of the hydrodynamic forces, indicate domination in the design of a supercavitating vehicle. An experiment was performed in a water tunnel to investigate the pressure characteristics of the cavity closure region. Ventilation methods were employed to generate artificial cavity, and the ventilation rate was adjusted accordingly to obtain the desired cavity length. An array of pressure transducers was laid down the cavity closure line to capture pressure distribution in this region. The experimental results show that there is a pressure peak in the cavity closure region, and the rise rate of pressure in space tends to be higher in the upwind side when the flow is non-axisymmetric. The transient pressure variations during the cavity formation procedure were also present. The method of measurement in this paper can be referenced by engineers. The result helps to study the flow pattern of cavity closure region, and it can also be used to analyze the formation of supercavitating vehicle hydrodynamics.     

Topological analysis of the formation of Jet-Wake flow pattern in centrifugal impeller channel

Topological analyses are carried out for the numerical results of internal flow field in centrifugal impeller. Topological rules of the singular point characteristics of the limiting streamline are derived and used to determine three dimensional separation patterns in centrifugal impeller and to verify the numerical results. The results reveal that the wake is saddle to nodal closed separation and the formation, its onset point and its developing process of Jet-Wake Flow pattern a in centrifugal impeller are presented in this paper.     

3~(rd) International Conference on Renewable Energies Offshore

<正>8-10 October 2018,Lisbon,Portugal Renewable energies offshore are becoming a significant contributor to the total energy produced in some countries and the interest in the subject is increasing.The second edition of this Conference aims to continue to contribute to the exchange of information about the developments and experience obtained in concept development,design and operation of such devices.     

采用局部的微分求积法求解激波管问题

The localized differential quadrature (LDQ) method is a numerical technique with high accuracy for solving most kinds of nonlinear problems in engineering and can overcome the difficulties of other methods (such as difference method) to numerically evaluate the derivatives of the functions.Its high efficiency and accuracy attract many engineers to apply the method to solve most of the numerical problems in engineering.However,difficulties can still be found in some particular problems.In the following study,the LDQ was applied to solve the Sod shock tube problem.This problem is a very particular kind of problem,which challenges many common numerical methods.Three different examples were given for testing the robustness and accuracy of the LDQ.In the first example,in which common initial conditions and solving methods were given,the numerical oscillations could be found dramatically;in the second example,the initial conditions were adjusted appropriately and the numerical oscillations were less dramatic than that in the first example;in the third example,the momentum equation of the Sod shock tube problem was corrected by adding artificial viscosity,causing the numerical oscillations to nearly disappear in the process of calculation.The numerical results presented demonstrate the detailed difficulties encountered in the calculations,which need to be improved in future work.However,in summary,the localized differential quadrature is shown to be a trustworthy method for solving most of the nonlinear problems in engineering.     

2005FIGURES OF WORLD SHIPPING （CHINA）SUMMIT年会人物：MITSUI 0.S.K. LINES,EXCELLENT AND RESILIENT COMPANY

Personal history I began my career with Mitsui O.S.K. Lines （MOL） upon graduation from Kyoto University in 1967. During my 38year career at the company, I have been involved in a broad range of maritime activities, and have witnessed dramatic changes in the industry as it has sought to meet the changing needs of societies and the globalization of economies. Key events in my career include a posting to Mitsui O.S.K. Lines＇ San Francisco Representative Office from 1975 to 1979;becoming a staff officer of the Planning Division in 1987, followed by a promotion to Deputy General Manager of the Division in 1988; appointment as General Manager of Europe and Oceania Division in 1993; being elected to a directorship in 1996; promotion to Managing Director in 1998, Senior Managing Director in 2000, Deputy President in 2003, and finally President in 2004. For me, the shipping industry is both a business and a passion. I am extremely excited about the changes and challenges that lie ahead for the industry as we begin the 21^st Century, and consider myself to be in a most enviable position leading Mitsui O.S.K. Lines, a company at the vanguard of shipping developments, in these exhilarating times.     

A three-dimensional, wave-current coupled, sediment transport model for POM

In the high-energy environment of coastal seas and estuaries,strong sediment resuspension/ deposition events are driven by surface waves,tides,winds and buoyancy driven currents.In recent years,A POM based three-dimensional,wave-current coupled,sediment transport model has been developed by the University of New South Wales.This paper presents several examples of the model applications to study sediment dynamics in the environments where forcings such as waves,tides,and winds are equally important to affect sediment fluxes and distributions.Firstly,the sediment transport model coupled to the Yellow Sea general circulation model and a third generation wave model SWAN was implemented in the Yellow Sea to study the dynamics of the sediment transport and resuspension in the northern Jiangsu shoal-wate(rNJSW).The sediment distributions and fluxes and their inter-annual variability were studied by realistic numerical simulations.The study found that the surface waves played a dominant role over the tides to form the turbidity maxima along the muddy coast of NJSW. Secondly,the sediment transport model was used to explore the effect of suspended sediment-induced stratification in the bottom boundary laye(rBBL).The model uses a re-parameterized bottom drag coefficient Cd that incorporates a linear stability function of flux Richardson number Rf.The study has shown that the sediment induced stratification in the BBL reduces the vertical eddy viscosity and bottom shear stress in comparison with the model prediction in a neutrally stratified BBL.In response to these apparent reductions,the tidal current shear is increased and sediments are abnormally concentrated within a thin wall layer that is overlain by a thicker layer with much smaller concentration.The formation of this fluid-mud layer near the seabed has led to a significant reduction in the total sediment transport.This study contributes to the understanding of formations of tidal flats along the coasts of turbid seas and estuaries.     

热带海洋大气中的3004铝和∝铜的原电池反应(英文)

The galvanic corrosion behaviour of aluminium 3004-∝brass with different area ratios was studied in the tropical marine atmosphere at Tuticorin harbour over a period of 426 days. The area ratios, viz. A Aluminium:A∝ brass, studied were 0.125, 0.25, 0.5, 1, 2, 4 and 8. The galvanic corrosion behaviour of the metals was studied in terms of the relative increase in the corrosion rate of aluminium due to galvanic coupling with ∝ brass, the relative decrease in the corrosion rate of ∝ brass due to galvanic coupling with aluminium, and the susceptibility of aluminium to pitting owing to galvanic coupling with ∝ brass. The galvanic potential and galvanic current of the system were monitored. Pits of different dimensions ranging from mild etchings to perforations were experienced on the borders and the surfaces of the interface of aluminium in contact with ∝ brass. The corrosion products resulting from galvanic corrosion were analysed using XRD and the pitting on aluminium as a result of galvanic corrosion was highlighted in terms of pit depth, size and density of pit, using a high resolution microscope. The most favourable area ratio of aluminium-∝ brass in marine atmosphere in terms of gravimetric corrosion rate is 8:1 and the most unfavourable area ratio of aluminium-∝ brass is 1:4.     

优化船用柴油机的性能以减少氧化硫SO_x排放物的形成（英文）

Optimization procedures are required to minimize the amount of fuel consumption and exhaust emissions from marine engines.This study discusses the procedures to optimize the performance of any marine engine implemented in a 0D/1D numerical model in order to achieve lower values of exhaust emissions. From that point, an extension of previous simulation researches is presented to calculate the amount of SO_x emissions from two marine diesel engines along their load diagrams based on the percentage of sulfur in the marine fuel used. The variations of SO_x emissions are computed in g/k W·h and in parts per million(ppm) as functions of the optimized parameters: brake specific fuel consumption and the amount of air-fuel ratio respectively.Then, a surrogate model-based response surface methodology is used to generate polynomial equations to estimate the amount of SO_x emissions as functions of engine speed and load. These developed non-dimensional equations can be further used directly to assess the value of SO_x emissions for different percentages of sulfur of the selected or similar engines to be used in different marine applications.     

拖曳嵌入式板锚在中国的研究近况(英文)

Experimental and theoretical studies of drag embedment plate anchors recently carried out in Tianjin University are summarized in this research paper, which involve a series of important topics relevant to the study of drag anchors. The techniques for measuring the trajectory and movement direction of drag anchors in soils, the techniques for measuring the moving embedment point and reverse catenary shape of the embedded drag line, the penetration mechanism and kinematic behavior of drag anchors, the ultimate embedment depth of drag anchors, the movement direction of the anchor with an arbitrary fluke section, the reverse catenary properties of the embedded drag line, the interactional properties between drag anchor and installation line, the kinematic model of drag anchors in seabed soils, and the analytical method for predicting the anchor trajectory in soils will all be examined. The present work remarkably reduces the uncertainties in design and analysis of drag embedment plate anchors, and is beneficial to improving the application of this new type of drag anchor in offshore engineering.     

Profile of China Ship Development and Design Center （CSDDC）

China Ship Development and Design Center （CSDDC） is one of the leading institutes engaged in the development and overall design of ships, submersibles and marine structures. With a history of over forty years, CSDDC has made great efforts to import and incorporate international advanced technologies and adapt them to its own actual projects. This enables CSDDC to remain the leading position in ship overall design in China. Over the past forty years, CSDDC has successfully accomplished many national key projects, and made significant contributions to the modernization of China defense and built up a reputation of ＂Cradle of China naval ships＂.     

Calculation of hydrodynamics for semi-submersibles based on NURBS

Accurate hydrodynamic calculations for semi-submersibles are critical to support modern rapid exploration and extraction of ocean resources. In order to speed hydrodynamic calculations, lines modeling structures were separated into structural parts and then fitted to Non-uniform Rational B-spline （NURBS）. In this way, the bow and stern section lines were generated. Modeling of the intersections of the parts was then done with the universal modeling tool MSC.Patran. Mesh was gererated on the model in order to obtain points of intersection on the joints, and then these points were fitted to NURBS. Next, the patch representation method was adopted to generate the meshes of wetted surfaces and interior free surfaces. Velocity potentials on the surfaces were calculated separately, on basis of which the irregular frequency effect was dealt with in the calculation of hydrodynamic coefficients. Finally, the motion response of the semi-submersible was calculated, and in order to improve calculations of vertical motion, a damping term was affixed in the vertical direction. The results show that the above methods can generate fine mesh accurately representing the wetted surface of a semi-submersible and thus improve the accuracy of hydrodynamic calculations.     

The Change of Maritime Industry

The year of 2012 has left people many unpleasant memories,i.e.the news related to the deficit of shipping enterprises lingered in our ears,the shortage of ship orders and bankruptcy of shipping enterprises appeared one after another,and a fierce battle was once again waged among the shipbuilding industries of China,Japan and South Korea in the downturn.In 2012,the legendary year of doomsday,who on earth can survive in the face of hardships? According to a saying,poverty gives rise to the desire for change,and the shipbuilding industry will seek change in the downturn of shipping market.     

Galvanic Interactions of Aluminium 3004 and∝Brass in Tropical M arine Atmosphere

The galvanic corrosion behaviour of alumiuium 3004 - ∝ brass with different area ratios was studied in the tropical marine atmosphere at Tuticorin harbour over a period of 426 days. The area ratios, viz. AAluminiurn：A∝ brass, studied were 0.125, 0.25, 0.5, 1, 2, 4 and 8. The galvanic corrosion behaviour of the metals was studied in terms of the relative increase in the corrosion rate of aluminium due to galvanic coupling with oc brass, the relative decrease in the corrosion rate of ∝ brass due to galvanic coupling with aluminium, and the susceptibility of aluminium to pitting owing to galvanic coupling with ∝ brass. The galvanic potential and galvanic current of the system were monitored. Pits of different dimensions ranging from mild etchings to perforations were experienced on the borders arid the surfaces of the interface of aluminium in contact with ∝ brass. The corrosion products resulting from galvanic corrosion were analysed using XRD and the pitting on aluminium as a result of galvanic corrosion was highlighted in terms of pit depth, size and density of pit, using a high resolution microscope. The most favourable area ratio of aluminium - ∝ brass in marine atmosphere in terms of gravimetric corrosion rate is 8：1 and the most unfavourable area ratio of aluminium - ∝ brass is 1：4.     

基于模拟减少集装箱船待港时间的实用方法(英文)

The main challenge for container ports is the planning required for berthing container ships while docked in port.Growth of containerization is creating problems for ports and container terminals as they reach their capacity limits of various resources which increasingly leads to traffic and port congestion.Good planning and management of container terminal operations reduces waiting time for liner ships.Reducing the waiting time improves the terminal’s productivity and decreases the port difficulties.Two important keys to reducing waiting time with berth allocation are determining suitable access channel depths and increasing the number of berths which in this paper are studied and analyzed as practical solutions.Simulation based analysis is the only way to understand how various resources interact with each other and how they are affected in the berthing time of ships.We used the Enterprise Dynamics software to produce simulation models due to the complexity and nature of the problems.We further present case study for berth allocation simulation of the biggest container terminal in Iran and the optimum access channel depth and the number of berths are obtained from simulation results.The results show a significant reduction in the waiting time for container ships and can be useful for major functions in operations and development of container ship terminals.     

一种改进的海洋平台结构损伤诊断方法研究(英文)

In the exploitation of ocean oil and gas, many offshore structures may be damaged due to the severe environment, so an effective method of diagnosing structural damage is urgently needed to locate the damage and evaluate its severity. Genetic algorithms have become some of the most important global optimization tools and been widely used in many fields in recent years because of their simple operation and strong robustness. Based on the natural frequencies and mode shapes of the structure, the damage diagnosis of a jacket offshore platform is attributed to an optimization problem and studied by using a genetic algorithm. According to the principle that the structural stiffness of a certain direction can be greatly affected only when the brace bar in the corresponding direction is damaged, an improved objective function was proposed in this paper targeting measurement noise and the characteristics of modal identification for offshore platforms. This function can be used as fitness function of a genetic algorithm, and both numerical simulation and physical model test results show that the improved method may locate the structural damage and evaluate the severity of a jacket offshore platform satisfactorily while improving the robustness of evolutionary searching and the reliability of damage diagnosis.     

槽道型高速滑行艇船型的自动生成(英文)

The creation of geometric model of a ship to determine the characteristics of hydrostatic and hydrodynamic, and also for structural design and equipments arrangement are so important in the ship design process. Planning tunnel high speed craft is one of the crafts in which, achievement to their top speed is more important. These crafts with the use of tunnel have the aero-hydrodynamics properties to diminish the resistance, good sea-keeping behavior, reduce slamming and avoid porpoising. Because of the existence of the tunnel, the hull form generation of these crafts is more complex and difficult. In this paper, it has attempted to provide a method based on geometry creation guidelines and with an entry of the least control and hull form adjustment parameters, to generate automatically the hull form of planning tunnel craft. At first, the equations of mathematical model are described and subsequent, three different models generated based on present method are compared and analyzed. Obviously, the generated model has more application in the early stages of design.     

流场中任意厚度阻尼复合圆柱壳的声辐射(英文)

The insertion loss of acoustic radiation of damped cylindrical shell described by 3-D elasticity Navier equations under radial harmonic applied load in fluid is presented. The classical integral transform technique, potential theory and Lamè resolution are used to derive the solutions of Navier equations. The higher precision inversion computation is introduced to solve the linear equations. Comparing with acoustic radiation of one-layer cylindrical shell, the influence of thickness, mass density, dilatational wave loss factor and Young's modulus of damping material and circumferential mode number of the cylindrical shell on the insertion loss is concluded. The theoretical model in the paper can be used to deal with the arbitrary thickness and any frequency of the coated layer in dynamic problem. The conclusions may be of theoretical reference to the application of damping material to noise and vibration control of submarines and underwater pipes.     

Galvanic corrosion behaviour of aluminium 3004 and copper in tropical marine atmosphere

The galvanic corrosion behaviour of aluminium 3004 and copper with different area ratios were studied in the tropical marine atmosphere at Tuticorin harbour over a period of 426 days. The area ratios OfAAI： Acu, studied were l：l, 1：2, l：4, 1：8, 2：1, 4：1 ＆ 8：1. The galvanic corrosion behaviour of metals was studied in terms of relative increase in the corrosion rate of aluminium due to galvanic coupling with copper, relative decrease in the corrosion rate of copper due to galvanic coupling with aluminium, and the susceptibility of aluminium to pitting owing to galvanic coupling with copper, The galvanic potential and galvanic current of the system were monitored. Pits of different dimensions ranging from mild etchings to perforations were experienced on the borders and the surfaces of the interface of aluminium in contact with copper. The weathering parameters and the environmental pollutants which have a major role in influencing the galvanic corrosion of metals were also monitored. The corrosion products resulting from galvanic corrosion were analysed using XRD and the pitting on aluminium resulting from galvanic corrosion has been highlighted in terms of pit depth, size and density of pit, using a high resolution microscope.     

MITSUI 0.S.K. LINES,EXCELLENT AND RESILIENT COMPANY

Personal history I began my career with Mitsui O.S.K. Lines (MOL) upon graduation from Kyoto University in 1967. During my 38-year career at the company, I have been involved in a broadrange of maritime activities, and have witnessed dramaticchanges in the industry as it has sought to meet the changingneeds of societies and the globalization of economies. Keyevents in my career include a posting to Mitsui O.S.K. Lines'San Francisco Representative Office from 1975 to 1979;becoming a staff officer of the Planning Division in 1987,followed by a promotion to Deputy General Manager of theDivision in 1988; appointment as General Manager of Europeand Oceania Division in 1993; being elected to a directorshipin 1996; promotion to Managing Director in 1998, SeniorManaging Director in 2000, Deputy President in 2003, andfinally President in 2004. For me, the shipping industry isboth a business and a passion. I am extremely excited aboutthe changes and challenges that lie ahead for the industry aswe begin the 21st Century, and consider myself to be in amost enviable position leading Mitsui O.S.K. Lines, acompany at the vanguard of shipping developments, in theseexhilarating times.