共查询到20条相似文献,搜索用时 687 毫秒
1.
2.
3.
4.
5.
汽车内饰情感设计系统研究 总被引:1,自引:1,他引:0
以用户需求为中心的情感化设计是当今产品设计的主流发展趋势.通过研究情感设计理论与方法,构建出一套基于情感设计的汽车内饰开发系统.该系统作为一种全面的设计辅助,可以帮助设计团队开发符合目标消费者情感需求的汽车内饰产品,从而帮助提升整车企业的设计水平与核心竞争力. 相似文献
6.
《汽车工艺与材料》2011,(11):29-29
穆格公司(纽交所代码:MOG.A和MOG.B)下属的穆格工业集团携旗下最新的产品和系统参展了9月14日至9月16日在上海举行的2011中国汽车测试展。"中国汽车市场正越来越具挑战,用户的需求也更趋多元化。基于穆格的技术平台,用户可以选择符合他们测试需求的解决方案。"穆格亚太区测试与仿真业务总监Tom Pierce表示,"我们一直坚持技术创新,不断提升系统性能,帮助客户实现更为灵活的测试解决方案。"穆格中国团队在展会上展示了如何用最简便的方式应对各种测试挑战。从软件到硬件,从小应用到大平台,穆格灵活的汽车测试解决方案能满足用户各种特定需求。 相似文献
7.
汽车功能复杂度的提升对人机交互系统提出了更多的需求,汽车新增的功能大多也需要通过人机交互系统与用户交互。本文介绍多模态交互在汽车的应用及汽车人机交互系统总体开发流程和具体开发方式,同时展望汽车人机交互的发展趋势。 相似文献
8.
基于文本挖掘的用户需求分析能够从大量的在线用户评论中挖掘出用户的显性需求和潜在需求。在用户需求挖掘理论研究的基础上,对某汽车用户在线评论数据进行采集、预处理、词云图可视化分析以及关键词共现分析。结果表明:该款汽车在空间、动力、内饰、外观方面具有优势,在胎噪、油耗、车机方面有待优化。 相似文献
9.
10.
本文对基于CAN总线的载货汽车状态追踪系统进行了研究,通过对CAN总线原理的分析,以及利用现代电子、计算机、传感测控等方面的技术,研究并提出了基于CAN总线的载货汽车状态追踪系统。该系统由于采用了CAN总线,用户可以根据不同汽车的具体情况动态地增删节点,而无需对硬件作任何的变动,从而提高了系统的兼容性与可靠性,实现了载货汽车运行状态的智能化追踪,给载货车辆维护提供了具有价值的参考信息。 相似文献
11.
12.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(4):573-596
An existing driver–vehicle model with neuromuscular dynamics is improved in the areas of cognitive delay, intrinsic muscle dynamics and alpha–gamma co-activation. The model is used to investigate the influence of steering torque feedback and neuromuscular dynamics on the vehicle response to lateral force disturbances. When steering torque feedback is present, it is found that the longitudinal position of the lateral disturbance has a significant influence on whether the driver’s reflex response reinforces or attenuates the effect of the disturbance. The response to angle and torque overlay inputs to the steering system is also investigated. The presence of the steering torque feedback reduced the disturbing effect of torque overlay and angle overlay inputs. Reflex action reduced the disturbing effect of a torque overlay input, but increased the disturbing effect of an angle overlay input. Experiments on a driving simulator showed that measured handwheel angle response to an angle overlay input was consistent with the response predicted by the model with reflex action. However, there was significant intra- and inter-subject variability. The results highlight the significance of a driver’s neuromuscular dynamics in determining the vehicle response to disturbances. 相似文献
13.
预应力曲线箱梁和异形箱梁的研究 总被引:7,自引:0,他引:7
近年来 ,国内外学者对曲线箱梁和异形箱梁的静力分析理论和计算方法作过大量的研究 ,但这些理论和方法在某种程度上都存在着一定的局限性 ,特别是在实际设计工作中 ,运用起来不能得心应手。为此本文在综合前人已取得经验下 ,针对桥梁结构设计中分析曲线箱梁、异形箱梁 ,经常遇到的难题进行了研究 ,建立一个较为完善的理论和方法 ,编制了等参元空间分析程序。在实际工程中进行实桥试验 ,验证了本文理论和方法的正确性。本文的研究工作更准确描述了箱梁的荷载响应 ,为设计人员提供直观的设计依据。对曲线箱梁和异形箱梁受力特性有了更一步的理解 ,并提出了新的见解 相似文献
14.
SMA是沥青码蹄脂碎石(Stone Matrix Asphal)的缩写,是一种以沥青结合料与少量的纤维稳定剂、细集料,以及较多的填料(矿粉)组成的沥青玛蹄脂,填充于间断级配粗集料骨架间隙中组成一体所形成的沥青混合料,简称SMA。该文介绍了SMA在上海的应用及其施工技术。 相似文献
15.
混凝土的推广使用已有一个世纪,目前在现代工程建设中仍占有重要的地位。而在今天,混凝土的裂缝较为普遍,在桥梁工程中裂缝几乎无所不在,尽管我们在施工中采取各种各样的措施,但收效甚微,裂缝仍然时有出现。该文指出,究其原因,人们对混凝土温度变化所产生的应力注意不够是其中之一,尤其是大体积混凝土。对此,温度应力与温度控制具有重要的意义。 相似文献
16.
利用AVL公司开发的BOOST软件可宏观地描述发动机的热力学过程且优化发动机的性能,而AVL的CRUISE软件可调用BOOST建立的发动机模型.在进行道路循环工况的仿真时,须对发动机全部工况点进行准确的标定.文中采用BOOST开发了发动机的仿真模型.通过调整节气门开度和燃烧模型参数,标定了发动机在多个转速和负荷点的转矩、功率和油耗,较好地模拟了发动机的动力性和经济性.最后基于ECE循环工况,将此模型与CRUISE进行联合仿真,分析了发动机瞬态工况的动力性、油耗和NO_x排放等参数. 相似文献
17.
J. R. Serrano F. J. Arnau V. Dolz A. Tiseira M. Lejeune N. Auffret 《International Journal of Automotive Technology》2008,9(3):277-288
This article presents a two-stage turbocharged heavy-duty diesel (HDD) engine designed to fulfil the US2007 anti-pollution
directive. This directive imposes very restrictive limits on the NOx and particle emissions of HDD engines. In this work,
the possibility of combining particle traps in the exhaust line to reduce soot emissions with very high EGR rates to reduce
NOx emissions is considered. This new generation engine implements two-stage turbocharging in order to improve the bsfc when
the engine is working on steady conditions as well as to optimize the engine transient response. After carrying out the tests,
the results were analyzed and the engine settings were adjusted to maximise its behaviour and minimise pollutant emissions.
NOx and soot emission peaks were also analyzed at engine transient conditions in order to keep them under certain levels,
and thus maintain the overall pollutant emissions to a level that is as low as possible. In summary, a double-stage turbocharging
configuration can greatly improve engine driveability (between 23% and 36% depending on engine speed), while reducing NOx
emissions during transient evolution without increasing opacity peaks beyond the stated limits. 相似文献
18.
19.
该文从研究超薄磨耗层的级配的选择入手,简单分析了超薄磨耗层的结构特点和强度形成机理,给出了几种国内外常用的超薄磨耗层级配范围,并提出了将SAC-10做为其研究的设计级配。在研究超薄磨耗层沥青混合料配合比设计的基础上,通过对SAC-10沥青混合料的马歇尔试验,确定了该沥青混合料的矿料级配和最佳沥青含量。最后采用车辙试验、浸水马歇尔和冻融劈裂试验及小梁弯曲试验等一系列试验,检测超薄磨耗层沥青混合料的各项路用性能,为在实际工程中的应用提供理论依据。 相似文献