共查询到20条相似文献,搜索用时 62 毫秒
1.
<正>中国消费者希望有更多的技术创新,对于高端产品的需求正快速增长。在车载人机界面领域,中国市场的新技术发展以及接受速度都非常之快。汽车技术正日趋智能化和集成化,尤其是随着消费电子在汽车上应用的增多,对车载人机界面的设计提出了更高要求。大陆集团仪表与人机界面业务单元希望通过一系列技术创新,满足消费者信息娱乐、安全便捷等方面的要求。这些创新产品也正逐渐引入中 相似文献
2.
从车载导航地图的存储介质、服务载体和服务内容等多方面探讨了车载导航地图服务的发展.物理存储技术的进步促进了导航地图数据存储的发展,为导航地图服务打下基础,手持导航设备及消费电子的出现极大扩展了车用导航电子地图的应用范围,实时动态数据的丰富提升了导航地图服务质量. 相似文献
3.
Local dimming(局部调光)是一种低成本提升车载显示器对比度和清晰度的技术。在目前OLED技术尚无法突破严苛的汽车环境要求的状况下,局部调光是一种首选的成本和性能兼顾的技术。在满足汽车环境要求的同时,大幅提升了显示器的清晰度,提高了显示内容的辨识度,同时成本的上升也在合理范围内。它能给客户带来更好的体验,使驾驶更为安全。本文对它的工作原理以及如何应用进行了阐述,给读者提供了一种思路和方法来提升车载显示器的对比度。 相似文献
4.
5.
正五、电气系统和电子系统这款奥迪A8(车型4N)展示了豪华车型在未来所要采用的车载电气系统和电子系统。车载电气系统的特点有:矩阵式LED大灯,采用了奥迪激光技术车尾LED灯带,尾灯采用OLED技术矩阵式LED阅读灯带有OLED显示屏的后座遥控系统48V主车载供电网,带有轻度混合动力技术所用动力装置都使用皮带-启动机-发电机(RSG)车门上的扶手是可加热式的,前、后中间扶手是可加热式的,方向盘是可加热式的 相似文献
6.
7.
8.
随着中国汽车工业、telematics服务、消费电子及成熟通讯技术的发展,中国telematics(车载无线通讯技术)市场已经获得了一个稳健发展的契机。 相似文献
9.
10.
11.
12.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(4):573-596
An existing driver–vehicle model with neuromuscular dynamics is improved in the areas of cognitive delay, intrinsic muscle dynamics and alpha–gamma co-activation. The model is used to investigate the influence of steering torque feedback and neuromuscular dynamics on the vehicle response to lateral force disturbances. When steering torque feedback is present, it is found that the longitudinal position of the lateral disturbance has a significant influence on whether the driver’s reflex response reinforces or attenuates the effect of the disturbance. The response to angle and torque overlay inputs to the steering system is also investigated. The presence of the steering torque feedback reduced the disturbing effect of torque overlay and angle overlay inputs. Reflex action reduced the disturbing effect of a torque overlay input, but increased the disturbing effect of an angle overlay input. Experiments on a driving simulator showed that measured handwheel angle response to an angle overlay input was consistent with the response predicted by the model with reflex action. However, there was significant intra- and inter-subject variability. The results highlight the significance of a driver’s neuromuscular dynamics in determining the vehicle response to disturbances. 相似文献
13.
预应力曲线箱梁和异形箱梁的研究 总被引:7,自引:0,他引:7
近年来 ,国内外学者对曲线箱梁和异形箱梁的静力分析理论和计算方法作过大量的研究 ,但这些理论和方法在某种程度上都存在着一定的局限性 ,特别是在实际设计工作中 ,运用起来不能得心应手。为此本文在综合前人已取得经验下 ,针对桥梁结构设计中分析曲线箱梁、异形箱梁 ,经常遇到的难题进行了研究 ,建立一个较为完善的理论和方法 ,编制了等参元空间分析程序。在实际工程中进行实桥试验 ,验证了本文理论和方法的正确性。本文的研究工作更准确描述了箱梁的荷载响应 ,为设计人员提供直观的设计依据。对曲线箱梁和异形箱梁受力特性有了更一步的理解 ,并提出了新的见解 相似文献
14.
混凝土的推广使用已有一个世纪,目前在现代工程建设中仍占有重要的地位。而在今天,混凝土的裂缝较为普遍,在桥梁工程中裂缝几乎无所不在,尽管我们在施工中采取各种各样的措施,但收效甚微,裂缝仍然时有出现。该文指出,究其原因,人们对混凝土温度变化所产生的应力注意不够是其中之一,尤其是大体积混凝土。对此,温度应力与温度控制具有重要的意义。 相似文献
15.
J. R. Serrano F. J. Arnau V. Dolz A. Tiseira M. Lejeune N. Auffret 《International Journal of Automotive Technology》2008,9(3):277-288
This article presents a two-stage turbocharged heavy-duty diesel (HDD) engine designed to fulfil the US2007 anti-pollution
directive. This directive imposes very restrictive limits on the NOx and particle emissions of HDD engines. In this work,
the possibility of combining particle traps in the exhaust line to reduce soot emissions with very high EGR rates to reduce
NOx emissions is considered. This new generation engine implements two-stage turbocharging in order to improve the bsfc when
the engine is working on steady conditions as well as to optimize the engine transient response. After carrying out the tests,
the results were analyzed and the engine settings were adjusted to maximise its behaviour and minimise pollutant emissions.
NOx and soot emission peaks were also analyzed at engine transient conditions in order to keep them under certain levels,
and thus maintain the overall pollutant emissions to a level that is as low as possible. In summary, a double-stage turbocharging
configuration can greatly improve engine driveability (between 23% and 36% depending on engine speed), while reducing NOx
emissions during transient evolution without increasing opacity peaks beyond the stated limits. 相似文献
16.
17.
该文从研究超薄磨耗层的级配的选择入手,简单分析了超薄磨耗层的结构特点和强度形成机理,给出了几种国内外常用的超薄磨耗层级配范围,并提出了将SAC-10做为其研究的设计级配。在研究超薄磨耗层沥青混合料配合比设计的基础上,通过对SAC-10沥青混合料的马歇尔试验,确定了该沥青混合料的矿料级配和最佳沥青含量。最后采用车辙试验、浸水马歇尔和冻融劈裂试验及小梁弯曲试验等一系列试验,检测超薄磨耗层沥青混合料的各项路用性能,为在实际工程中的应用提供理论依据。 相似文献
18.
19.
公路工程监理人员市场供需模型研究 总被引:2,自引:0,他引:2
提出了建立监理人员需求和供给模型的方法,推导了计算公式。根据公路建设发展的历史数据,对历年公路建设监理人员需求和供给进行了计算和比较。 相似文献
20.
本文提出一种有效路形测量的新方法,研究轮胎的位移包容性。提出以轮胎包容参数为变量把真实路面功率谱变换为有效路面功率谱的新方法。该研究是道路激励模拟的基础研究。 相似文献