Observability in traffic networks. Plate scanning added by counting information

The paper deals with the observability problem in traffic networks, including route, origin?Cdestination and link flows, based on number plate scanning and link flow observations. A revision of the main observability concepts and methods is done using a small network. Starting with the full observability of the network based only on number plate scanning on some links, the number of scanned links is reduced and replaced by counted link flows, but keeping the full observability of all flows in the network. In this way, the cost can be substantially reduced. To this end, several methods are given and discussed, and two small and one real case of networks are used to illustrate the proposed methodologies. Finally, some conclusions and final recommendations are included.     

A graphical approach to identify sensor locations for link flow inference

Information of link flows in a traffic network becomes increasingly critical in contemporary transportation practice and researches. The network sensor installation is carried out to supply such information. In this paper, we present a graphical approach to determine the smallest subset of links in a traffic network for counting sensor installation, so as to infer the flows on all remaining links. The elegant assumption-free character of the problem introduced by Hu, Peeta and Chu is still kept in this approach. This study points out the topological tree feature of solutions that makes it possible for traffic management agencies to easily and flexibly select links for sensor installation in practice. Addressing from the same graphical perspective, we provide solutions to four other important problems about sensor locations. The preceding two problems are, in traffic networks that already have sensors installed on some links, to identify the subset of links on which link flows can be inferred from sensor measurements and to determine the smallest subset of links on which counting sensors also need to be installed so as to infer link flows on all remaining non-equipped links. The third is to identify the optimal locations for a given number of sensors so as to infer flows on as many links as possible by gradually enlarging the number of links included in circuits. The last one is to determine the smallest subset of links on which to install sensors, in such a way that it becomes possible at the same time to satisfy prior requirements and infer the flows on all remaining links, through building a minimum spanning tree. These methods can be applied to all kinds of long-term planning and link-based applications in traffic networks.     

Bayesian inference for day-to-day dynamic traffic models

There is significant current interest in the development of models to describe the day-to-day evolution of traffic flows over a network. We consider the problem of statistical inference for such models based on daily observations of traffic counts on a subset of network links. Like other inference problems for network-based models, the critical difficulty lies in the underdetermined nature of the linear system of equations that relates link flows to the latent path flows. In particular, Bayesian inference implemented using Markov chain Monte Carlo methods requires that we sample from the set of route flows consistent with the observed link flows, but enumeration of this set is usually computationally infeasible.We show how two existing conditional route flow samplers can be adapted and extended for use with day-to-day dynamic traffic. The first sampler employs an iterative route-by-route acceptance–rejection algorithm for path flows, while the second employs a simple Markov model for traveller behaviour to generate candidate entire route flow patterns when the network has a tree structure. We illustrate the application of these methods for estimation of parameters that describe traveller behaviour based on daily link count data alone.     

Designing heterogeneous sensor networks for estimating and predicting path travel time dynamics: An information-theoretic modeling approach

With a particular emphasis on the end-to-end travel time prediction problem, this paper proposes an information-theoretic sensor location model that aims to minimize total travel time uncertainties from a set of point, point-to-point and probe sensors in a traffic network. Based on a Kalman filtering structure, the proposed measurement and uncertainty quantification models explicitly take into account several important sources of errors in the travel time estimation/prediction process, such as the uncertainty associated with prior travel time estimates, measurement errors and sampling errors. By considering only critical paths and limited time intervals, this paper selects a path travel time uncertainty criterion to construct a joint sensor location and travel time estimation/prediction framework with a unified modeling of both recurring and non-recurring traffic conditions. An analytical determinant maximization model and heuristic beam-search algorithm are used to find an effective lower bound and solve the combinatorial sensor selection problem. A number of illustrative examples and one case study are used to demonstrate the effectiveness of the proposed methodology.     

A dynamic linear model for the estimation of time‐varying origin–destination matrices from link counts

We propose a dynamic linear model (DLM) for the estimation of day‐to‐day time‐varying origin–destination (OD) matrices from link counts. Mean OD flows are assumed to vary over time as a locally constant model. We take into account variability in OD flows, route flows, and link volumes. Given a time series of observed link volumes, sequential Bayesian inference is applied in order to estimate mean OD flows. The conditions under which mean OD flows may be estimated are established, and computational studies on two benchmark transportation networks from the literature are carried out. In both cases, the DLM converged to the unobserved mean OD flows when given sufficient observations of traffic link volumes despite assuming uninformative prior OD matrices. We discuss limitations and extensions of the proposed DLM. Copyright © 2017 John Wiley & Sons, Ltd.     

Identification of vehicle sensor locations for link-based network traffic applications

Information on link flows in a vehicular traffic network is critical for developing long-term planning and/or short-term operational management strategies. In the literature, most studies to develop such strategies typically assume the availability of measured link traffic information on all network links, either through manual survey or advanced traffic sensor technologies. In practical applications, the assumption of installed sensors on all links is generally unrealistic due to budgetary constraints. It motivates the need to estimate flows on all links of a traffic network based on the measurement of link flows on a subset of links with suitably equipped sensors. This study, addressed from a budgetary planning perspective, seeks to identify the smallest subset of links in a network on which to locate sensors that enables the accurate estimation of traffic flows on all links of the network under steady-state conditions. Here, steady-state implies that the path flows are static. A “basis link” method is proposed to determine the locations of vehicle sensors, by using the link-path incidence matrix to express the network structure and then identifying its “basis” in a matrix algebra context. The theoretical background and mathematical properties of the proposed method are elaborated. The approach is useful for deploying long-term planning and link-based applications in traffic networks.     

Network sensor health problem

Many existing studies on the sensor health problem determine an individual sensor’s health status based on the statistical characteristics of collected data by the sensor. In this research, we study the sensor health problem at the network level, which is referred to as the network sensor health problem. First, based on the conservation principle of daily flows in a network, we separate all links into base links and non-base links, such that the flows on the latter can be calculated from those on the former. In reality, the network flow conservation principle can be violated due to the existence of unhealthy sensors. Then we define the least inconsistent base set of links as those that minimize the sum of squares of the differences between observed and calculated flows on non-base links. But such least inconsistent base sets may not be unique in a general road network. Finally we define the health index of an individual sensor as the frequency that it appears in all of the least inconsistent base sets. Intuitively, a lower health index suggests that the corresponding sensor is more likely to be unhealthy. We present the brute force method to find all least inconsistent base sets and calculate the health indices. We also propose a greedy search algorithm to calculate the approximate health indices more efficiently. We solve the network sensor health problem for a real-world example with 16 nodes and 30 links, among which 18 links are monitored with loop detectors. Using daily traffic count data from the Caltrans Performance Measurement System (PeMS) database, we use both the brute-force and greedy search methods to calculate the health indices for all the sensors. We find that all the four sensors flagged as unhealthy (high value) by PeMS have the lowest health indices. This confirms that a sensor with a lower health index is more likely to be unhealthy. Therefore, we can use such health indices to determine the relative reliability of different sensors’ data and prioritize the maintenance of sensors.     

Link travel time inference using entry/exit information of trips on a network

This paper studies link travel time estimation using entry/exit time stamps of trips on a steady-state transportation network. We propose two inference methods based on the likelihood principle, assuming each link associates with a random travel time. The first method considers independent and Gaussian distributed link travel times, using the additive property that trip time has a closed-form distribution as the summation of link travel times. We particularly analyze the mean estimates when the variances of trip time estimates are known with a high degree of precision and examine the uniqueness of solutions. Two cases are discussed in detail: one with known paths of all trips and the other with unknown paths of some trips. We apply the Gaussian mixture model and the Expectation–Maximization (EM) algorithm to deal with the latter. The second method splits trip time proportionally among links traversed to deal with more general link travel time distributions such as log-normal. This approach builds upon an expected log-likelihood function which naturally leads to an iterative procedure analogous to the EM algorithm for solutions. Simulation tests on a simple nine-link network and on the Sioux Falls network respectively indicate that the two methods both perform well. The second method (i.e., trip splitting approximation) generally runs faster but with larger errors of estimated standard deviations of link travel times.     

Global convergence of the trial-and-error method for the traffic-restraint congestion-pricing scheme with day-to-day flow dynamics

The traffic-restraint congestion-pricing scheme (TRCPS) aims to maintain traffic flow within a desirable threshold for some target links by levying the appropriate link tolls. In this study, we propose a trial-and-error method using observed link flows to implement the TRCPS with the day-to-day flow dynamics. Without resorting to the origin–destination (O–D) demand functions, link travel time functions and value of time (VOT), the proposed trial-and-error method works as follows: tolls for the traffic-restraint links are first implemented each time (trial) and they are subsequently updated using observed link flows in a disequilibrium state at any arbitrary time interval. The trial-and-error method has the practical significance because it is necessary only to observe traffic flows on those tolled links and it does not require to wait for the network flow pattern achieving the user equilibrium (UE) state. The global convergence of the trial-and-error method is rigorously demonstrated under mild conditions. We theoretically show the viability of the proposed trial-and-error method, and numerical experiments are conducted to evaluate its performance. The result of this study, without doubt, enhances the confidence of practitioners to adopt this method.     

Eco-system optimal time-dependent flow assignment in a congested network

This research addresses the eco-system optimal dynamic traffic assignment (ESODTA) problem which aims to find system optimal eco-routing or green routing flows that minimize total vehicular emission in a congested network. We propose a generic agent-based ESODTA model and a simplified queueing model (SQM) that is able to clearly distinguish vehicles’ speed in free-flow and congested conditions for multi-scale emission analysis, and facilitates analyzing the relationship between link emission and delay. Based on the SQM, an expanded space-time network is constructed to formulate the ESODTA with constant bottleneck discharge capacities. The resulting integer linear model of the ESODTA is solved by a Lagrangian relaxation-based algorithm. For the simulation-based ESODTA, we present the column-generation-based heuristic, which requires link and path marginal emissions in the embedded time-dependent least-cost path algorithm and the gradient-projection-based descent direction method. We derive a formula of marginal emission which encompasses the marginal travel time as a special case, and develop an algorithm for evaluating path marginal emissions in a congested network. Numerical experiments are conducted to demonstrate that the proposed algorithm is able to effectively obtain coordinated route flows that minimize the system-wide vehicular emission for large-scale networks.     

Hub location with flow economies of scale

A characteristic feature of hub and spoke networks is the bundling of flows on the interhub links. This agglomeration of flows leads to reduced travel costs across the interhub links. Current models of hub location do not adequately model the scale economies of flow that accrue due to the agglomeration of flows. This paper shows that current hub location models, by assuming flow-independent costs, not only miscalculate total network cost, but may also erroneously select optimal hub locations and allocations. The model presented in this paper more explicitly models the scale economies that are generated on the interhub links and in doing so provides a more reliable model representation of the reality of hub and spoke networks.     

Norm approximation method for handling traffic count inconsistencies in path flow estimator

Path flow estimator (PFE) is a one-stage network observer proposed to estimate path flows and hence origin–destination (O–D) flows from traffic counts in a transportation network. Although PFE does not require traffic counts to be collected on all network links when inferring unmeasured traffic conditions, it does require all available counts to be reasonably consistent. This requirement is difficult to fulfill in practice due to errors inherited in data collection and processing. The original PFE model handles this issue by relaxing the requirement of perfect replication of traffic counts through the specification of error bounds. This method enhances the flexibility of PFE by allowing the incorporation of local knowledge, regarding the traffic conditions and the nature of traffic data, into the estimation process. However, specifying appropriate error bounds for all observed links in real networks turns out to be a difficult and time-consuming task. In addition, improper specification of the error bounds could lead to a biased estimation of total travel demand in the network. This paper therefore proposes the norm approximation method capable of internally handling inconsistent traffic counts in PFE. Specifically, three norm approximation criteria are adopted to formulate three L_p-PFE models for estimating consistent path flows and O–D flows that simultaneously minimize the deviation between the estimated and observed link volumes. A partial linearization algorithm embedded with an iterative balancing scheme and a column generation procedure is developed to solve the three L_p-PFE models. In addition, the proposed L_p-PFE models are illustrated with numerical examples and the characteristics of solutions obtained by these models are discussed.     

The European freight railway system as a hub-and-spoke network

This paper addresses a hub-and-spoke network problem for railroad freight, where a central planner is to find transport routes, frequency of service, length of trains to be used, and transportation volume. Hub-and-spoke networks, often found in air freight, have not been favoured by railways in the past. Such a structure could be profitable, however, if there exist concentrated freight flows on some service links. We formulate a linear integer programming model whose objective function includes not only the typical operational cost, but also cost due to the transit time spent by freight in the network. We then develop heuristic algorithms to solve large scale instances occurring in rail freight systems in France plus Italy; Germany; and a 10-country European network. By assuming that every node is equipped with consolidation capability, we let the final solution naturally reveal potential hub locations, the impact of several of which is studied by sensitivity analysis.     

Vehicle identification sensor models for origin–destination estimation

The traditional approach to origin–destination (OD) estimation based on data surveys is highly expensive. Therefore, researchers have attempted to develop reasonable low-cost approaches to estimating the OD vector, such as OD estimation based on traffic sensor data. In this estimation approach, the location problem for the sensors is critical. One type of sensor that can be used for this purpose, on which this paper focuses, is vehicle identification sensors. The information collected by these sensors that can be employed for OD estimation is discussed in this paper. We use data gathered by vehicle identification sensors that include an ID for each vehicle and the time at which the sensor detected it. Based on these data, the subset of sensors that detected a given vehicle and the order in which they detected it are available. In this paper, four location models are proposed, all of which consider the order of the sensors. The first model always yields the minimum number of sensors to ensure the uniqueness of path flows. The second model yields the maximum number of uniquely observed paths given a budget constraint on the sensors. The third model always yields the minimum number of sensors to ensure the uniqueness of OD flows. Finally, the fourth model yields the maximum number of uniquely observed OD flows given a budget constraint on the sensors. For several numerical examples, these four models were solved using the GAMS software. These numerical examples include several medium-sized examples, including an example of a real-world large-scale transportation network in Mashhad.     

Inferences on trip matrices from observations on link volumes: A Bayesian statistical approach

Previous methods for estimating a trip matrix from traffic volume counts have used the principles of maximum entropy and minimum information. These techniques implicitly give as little weight to prior information on the trip matrix as possible. The new method proposed here is based on Bayesian statistical inference and has several advantages over these earlier approaches. It allows complete flexibility in the degree of belief placed on the prior estimate of the trip matrix and also allows for different degrees of belief in diffeent parts of the prior estimate. Furthermore under certain assumptions the method reduces to a simple updating scheme in which observations on the link flows successively modify the trip matrix. At the end of the scheme confidence intervals are available for the estimates of the trip matrix elements.     

Estimation of origin-destination matrices from link traffic counts on congested networks

Conventional methods for estimating origin-destination (O-D) trip matrices from link traffic counts assume that route choice proportions are given constants. In a network with realistic congestion levels, this assumption does not hold. This paper shows how existing methods such as the generalized least squares technique can be integrated with an equilibrium traffic assignment in the form of a convex bilevel optimization problem. The presence of measurement errors and time variations in the observed link flows are explicitly considered. The feasibility of the model is always guaranteed without a requirement for estimating consistent link flows from counts. A solution algorithm is provided and numerical simulation experiments are implemented in investigating the model's properties. Some related problems concerning O-D matrix estimation are also discussed.     

A cell transmission model for dynamic lane reversal with autonomous vehicles

Autonomous vehicles admit consideration of novel traffic behaviors such as reservation-based intersection controls and dynamic lane reversal. We present a cell transmission model formulation for dynamic lane reversal. For deterministic demand, we formulate the dynamic lane reversal control problem for a single link as an integer program and derive theoretical results. In reality, demand is not known perfectly at arbitrary times in the future. To address stochastic demand, we present a Markov decision process formulation. Due to the large state size, the Markov decision process is intractable. However, based on theoretical results from the integer program, we derive an effective heuristic. We demonstrate significant improvements over a fixed lane configuration both on a single bottleneck link with varying demands, and on the downtown Austin network.     

Decomposing travel times measured by probe-based traffic monitoring systems to individual road segments

In probe-based traffic monitoring systems, traffic conditions can be inferred based on the position data of a set of periodically polled probe vehicles. In such systems, the two consecutive polled positions do not necessarily correspond to the end points of individual links. Obtaining estimates of travel time at the individual link level requires the total traversal time (which is equal to the polling interval duration) be decomposed. This paper presents an algorithm for solving the problem of decomposing the traversal time to times taken to traverse individual road segments on the route. The proposed algorithm assumes minimal information about the network, namely network topography (i.e. links and nodes) and the free flow speed of each link. Unlike existing deterministic methods, the proposed solution algorithm defines a likelihood function that is maximized to solve for the most likely travel time for each road segment on the traversed route. The proposed scheme is evaluated using simulated data and compared to a benchmark deterministic method. The evaluation results suggest that the proposed method outperforms the bench mark method and on average improves the accuracy of the estimated link travel times by up to 90%.     

Guaranteed prediction and estimation of the state of a road network

The paper presents an algorithm for the prediction and estimation of the state of a road network comprising freeways and arterials, described by a Cell Transmission Model (CTM). CTM divides the network into a collection of links. Each link is characterized by its fundamental diagram, which relates link speed to link density. The state of the network is the vector of link densities. The state is observed through measurements of speed and flow on some links. Demand is specified by the volume of vehicles entering the network at some links, and by split ratios according to which vehicles are routed through the network. There is model uncertainty: the parameters of the fundamental diagram are uncertain. There is uncertainty in the demand around the nominal forecast. Lastly, the measurements are uncertain. The uncertainty in each model parameter, demand, and measurement is specified by an interval. Given measurements over a time interval [0, t] and a horizon τ ? 0, the algorithm computes a set of states with the guarantee that the actual state at time (t + τ) will lie in this set, consistent with the given measurements. In standard terminology the algorithm is a state prediction or an estimate accordingly as τ > 0 or =0. The flow exiting a link may be controlled by an open- or closed-loop controller such as a signal or ramp meter. An open-loop controller does not change the algorithm, indeed it may make the system more predictable by tightening density bounds downstream of the controller. In the feedback case, the value of the control depends on the estimated state bounds, and the algorithm is extended to compute the range of possible closed-loop control values. The algorithm is used in a proposed design of a decision support system for the I-80 integrated corridor.