Ⅱ型动态扩展裂纹尖端应力场

在利用弹粘塑性力学模型的情况下,对动态扩展裂纹尖端应力场的对数奇异性进行了研究.以Ⅱ型裂纹为例进行了求解计算,详细地分析了粘性系数α、马赫数M2对裂纹尖端的应力场影响.指出了文献[1]中对数奇异性区域存在的问题,解释了文献[1]中过渡区的成因.     

T型接头横向埋藏裂纹扩展特性

基于断裂力学理论和有限元分析,研究T型接头横向埋藏裂纹扩展特性,实现了双向拉伸载荷作用下T型接头横向埋藏裂纹扩展形状变化的数值模拟。结果表明:T型接头横向埋藏裂纹扩展至结构表面时的形状为近圆形,与裂纹埋藏位置和初始形状无关;埋藏于焊趾端部板材中的裂纹扩展快于埋藏于焊缝中的裂纹扩展。     

一种基于累积损伤理论和裂纹尖端弹塑性应力场的裂纹扩展预测方法

文章提出了一种预测疲劳寿命的应力循环叠加和损伤循环叠加的双重叠加方法。该方法依据累积损伤理论,通过分析变幅载荷下裂纹尖端的应力场,采用应力循环叠加的方法反映残余应力的影响;同时利用SWT应力应变和寿命的关系,循环叠加裂尖损伤。该方法能够很好地反映过载时裂纹扩展的迟滞效应,适合变幅载荷下疲劳寿命的评估分析。     

复杂应力场中裂纹疲劳扩展寿命预报

船舶作为一种大型焊接结构,其疲劳热点部位的应力应变场分布很复杂,要预报这些部位的裂纹疲劳扩展寿命,必须解决复杂场中裂纹的应力强度因子计算及其裂纹扩展方向问题.该文对船舶肘板处两种不同原因产生的裂纹的扩展路径、扩展速率进行了研究.裂纹扩展方向用第一主应力准则确定,在裂纹扩展方向上给定不同的裂纹增量,得到不同长度裂纹的复合裂纹等效应力强度因子,并拟合这些计算结果得出船舶肘板的应力强度因子计算式.结合裂纹扩展率单一曲线模型对肘板裂纹扩展寿命进行了预报,预报结果与实验结果符合得较好,说明所采用的方法可行.对建立船舶典型节点的裂纹扩展寿命预报方法有参考价值.     

刚性-压力敏感性材料界面I型准静态扩展裂纹尖端场

为了研究船用工程复合材料的界面裂纹特性,建立了刚性-压力敏感粘弹塑性材料Ⅰ型准静态扩展裂纹的力学模型.在稳态扩展阶段,应力和应变具有相同的奇异量级,即(σ,ε)∝γ<'-1/(n-1)>.引入Airy应力函数,通过渐近分析得出了裂纹尖端应力和应变的分离变量形式的渐近解,并采用打靶法求得了裂纹尖端应力和应变的数值结果.数值计算结果表明,界而裂尖场主要受材料的泊松比和幂硬化指数的控制.通过对裂纹尖端场的渐近分析,从应变角度出发,提出了刚性一压力敏感性材料界面Ⅰ型准静态扩展裂纹的断裂判据.     

Asymptotic field of mode Ⅱ dynamic growing crack in visco-elastic material

A mechanical model of visco-elastic material is established in order to investigate viscous effect in dynamic growing crack-tip field of mode Ⅱ. It is shown that in stable creep growing phase, elastic deformation and viscous deformation are equally dominant in the near-tip field, the stress and strain have the same singularity, namely, (σε) ∝r^-1/(n-1). The asymptotic solutions of separatied variables of stress, stain and displacement in crack-tip field are obtained by asymptotic analysis, and the results of numerical value of stress and strain in crack-tip field are obtained by shooting method. Through numerical calculation, it is shown that the near-tip fields are mainly governed by the creep exponent n and Mach number M. By the asymptotic analysis to the crack-tip field, the fracture criterion of mode Ⅱ dynamic growing crack of visco-elastic materials is put forward from the point of view of strain.     

尖角裂纹周围应力场分析

对于裂纹的分析,不仅要研究裂纹边界的应力状况,而且还要研究离开裂纹边界一定范围内的应力变化情况.针对尖角裂纹,采用弹性断裂理论和复变函数理论建立计算模型.通过保角映射方法建立精确的边界条件,解决了尖角裂纹的边界条件问题.根据所求得的尖角裂纹应力表达式对不同的裂纹张开角对应力分布的影响进行全面的研究.得到了不同张开角的尖角裂纹周围应力分布.并对不同裂纹张开角的应力场进行了比较全面的分析.     

Asymptotic analysis of mode I propagating crack-tip field in a creeping material

Adopting an elastic-viscoplastic, the asymptotic problem of mode I propagating crack-tip field is investigated. Various asymptotic solutions resulting from the analysis of crack growing programs are presented. The analysis results show that the quasistatically growing crack solutions are the special case of the dynamic propagating solutions. Therefore these two asymptotic solutions can be unified.     

Asymptotic analysis of mode Ⅰ propagating crack-tip field in a creeping material

0　INTRODUCTIONWeknowthatthemetalmaterialwillbegincreepwhenthetemperatureishigherthan 30 per centoftheirsmeltingpoint.Foraturbine,adieselengine,anaerospacestructureandothermotivepowermechanisms,thematerialsstillworkwhentheirtemperaturesovershootthecreepthresholdval ue.Thecreepdeformationwilloccuratnormaltem peratureforthepolymerstructures(e.g .plasticspipingelements) .Inthecaseofcreepingthefrac tureofthestructureoccursduetocreepfractureandcreepcrackgrowth.Thereforetheresearchonthecrackgro…     

不同的裂纹尺寸对椭圆形裂纹应力强度因子影响的研究

针对平板椭圆形裂纹,提出了椭圆裂纹求解应力强度因子的解析解法,该方法是建立在弹性断裂理论及复变函数理论基础上的。文中针对椭圆裂纹,在具有不同的外荷载,以及不同的椭圆裂纹形状情况下,对应力强度因子进行较为全面的仿真分析。得到了应力强度因子和椭圆裂纹长短轴及所处位置,以及外荷载之间的关系变化的曲线。利用所建立的计算模型,可以非常迅速地求得不同几何参数情况下椭圆裂纹在复杂应力场中沿裂纹周边不同位置的应力强度因子。并对三种不同椭圆裂纹形状情况下的应力强度因子进行了分析和比较。     

The asymptotic field of a dynamically growing crack in a viscoelastic materia

A mechanical model of a fracturing viscoelastic material was developed to investigate viscous effects in a dynamically growing crack-tip field. It was shown that in the stable creep-growing phase,elastic deformation and viscous deformation are equally dominant in the near-tip field,and stress and strain have the same singularity,namely,(σ,ε ) ∝ r?1 /( n?1) . The asymptotic solution of separating variables of stress,stain and displacement in the crack-tip field was obtained by asymptotic analysis,and the resulting numerical value of stress and strain in the crack-tip field was obtained by the shooting method and the boundary condition of a mode I crack. Through numerical calculation,it was shown that the near-tip fields are mainly governed by the creep exponent n and Mach number M . When n →∞,the asymptotic solution of a viscoelastic material can be degenerated into that of Freund's elastic-ideally plastic material by analyzing basic equations.     

Fatigue crack growth under mixed mode I + III loading

Mixed mode I + III fatigue crack growth is studied numerically and experimentally by using modified CT specimen. Some parameters such as initial angle and initial length of crack, thickness and load ratios can affect the fatigue behaviors. The crack growth path and surface, crack front length, variations of stress intensity factors, twisting of crack surface and fatigue lives were determined by using Franc3d and compared with experimental data. By increasing angle and length of initial crack, mode I effects decrease while mode III effects increase. Mode II of the fracture is almost negligible for the modified CT specimen.     

冲击载荷下含表面裂纹潜艇典型结构的动态断裂研究

文章基于大型通用有限元分析软件ANSYS研究了带有初始表面裂纹的潜艇典型结构在不同下潜深度、不同爆心到船壳距离R和不同作用方位冲击载荷作用下的动态应力强度因子及其最大值与冲击因子的变化规律,然后以921A钢为例对多种工况下结构是否发生失稳断裂作出初步判断。