Intermittent automatic train protection using an infrared system

Automatic train protection (ATP) is a vital part of the signalling system that prevents collisions between trains, especially on densely trafficked lines. Conventionally, ATP uses a transponder to communicate between an onboard train device and a trackside device. In Indonesia, ATP is not yet implemented and all trains are currently operated by drivers. It has now become a necessity to install ATP in Indonesia in order to protect train operations. However, as in many tropical and developing countries there are some environmental problems, especially heavy rain, as well as the theft of trackside equipment that influences performance. Installed trackside devices must therefore meet certain criteria such as low-cost configuration, minimalized devices on the track, ease of maintenance, etc. To address the necessity of ATP and to meet these criteria for trackside devices, we develop ATP using an infrared system. This type of ATP – the intermittent ATP system – consists of onboard devices and infrared sensors as trackside equipment. This approach to ATP offers a cost-effective solution and ensures the safety of train movements.     

An improved car‐following model for railway traffic

In this paper, we propose an improved traffic model for simulating train movement in railway traffic. The proposed model is based on optimal velocity car‐following model. In order to test the proposed model, we use it to simulate the train movement with fixed‐block system. In simulations, we analyze and discuss the space–time diagram of railway traffic flow and the trajectories of train movement. Simulation results demonstrate that the proposed model can be successfully used for simulating the train movement in railway traffic. From the space–time diagram, we find some complex phenomena of train flow, which are observed in real railway traffic, such as train delays. By analyzing the trajectories of train movement, some dynamic characteristics of trains can be reproduced. Copyright © 2011 John Wiley & Sons, Ltd.     

Assessing the usage and level-of-service of pedestrian facilities in train stations: A Swiss case study

A framework for assessing the usage and level-of-service of rail access facilities is presented. It consists of two parts. A dynamic demand estimator allows to obtain time-dependent pedestrian origin–destination demand within walking facilities. Using that demand, a traffic assignment model describes the propagation of pedestrians through the station, providing an estimate of prevalent traffic conditions in terms of flow, walking times, speed and density. The corresponding level-of-service of the facilities can be directly obtained. The framework is discussed at the example of Lausanne railway station. For this train station, a rich set of data sources including travel surveys, pedestrian counts and trajectories has been collected in collaboration with the Swiss Federal Railways. Results show a good performance of the framework. To underline its practical applicability, a six-step planning guideline is presented that can be used to design and optimize rail access facilities for new or existing train stations. In the long term, the framework may also be used for crowd management, involving real-time monitoring and control of pedestrian flows.     

动卧客运与快递货运的高速铁路夜间能力利用模式

目前我国高速铁路的日间行车能力已得到了较为充分的利用,而如何组织好高铁夜间垂直天窗与夜行列车之间的耦合关系、用好高铁夜间能力,是适应多样化市场需求的需要,也是进一步提升高铁经营效益的有效途径。对此,本文提出了动卧列车和货运动车组两种相对可行的高铁夜间运输产品,分别对其产品特征进行了分析,充分考虑高铁夜间天窗制约下两种列车的开行模式,基于市场需求提出了列车开行策略,并在充分对比两种产品的经济效益、客(货)源组织、能力分配等因素的基础上,给出了高铁夜间能力发展建议。     

A practical capacity model of a single track line

The paper presents a model for determining the practical capacity of a single track line, i.e. the maximum number of trains which can be run along it in a time unit under the condition that each train enters its bottleneck segment with a definite delay.

The input data used in the model are: geometrical characteristics of the bottleneck segment of the line under study, the intensity and structure of demand expressed by a number of trains which are run over the line in a given time unit, the scenario of traffic running over the line under study and the operational tactics of individual train categories processing on the bottleneck segment.

(Two tactics can be applied in the train processing on the line under study; first, the trains of individual categories are given different priorities in the processing, and second, all the trains have the same priority).

The output results of the model are average delays of trains of each category occurring within the train processing performed on the bottleneck segment of the line under study in a given time unit.     

Standardization of capacity unit for headway-based rail capacity analysis

Determining the required capacity upgrades to accommodate future demand is a critical process in assisting public and private financing of capacity investments. Conventional railway systems usually operate multiple types of trains on the same track. These different types of trains can exert substantially different capacity impact, and can cause serious operational conflicts. In the past, rail line capacity is commonly defined as the maximum number of trains that can be operated on a section of track within a given time period. However, a specific unit (trains/hr or trains/day) does not reflect the heterogeneity of train types. According to the concept of base train equivalents (BTE) and base train unit (BTU), this study developed headway-based models to determine BTE for transforming different train types into a standard unit (i.e., BTU). An approximate method for lines with three and more types of trains was also proposed to compute BTEs for non-base trains. Results from the case studies demonstrate that this method enables the standardization of rail capacity unit, facilitates assessment of the impact from heterogeneous trains, and allows comparison and evaluation of the capacity measurements from different lines and systems.     

Coordinated cruise control for high-speed train movements based on a multi-agent model

This paper investigates the coordinated cruise control strategy for multiple high-speed trains’ movement. The motion of an ordered set of high-speed trains running on a railway line is modeled by a multi-agent system, in which each train communicates with its neighboring trains to adjust its speed. By using the potential fields and LaSalles invariance principle, we design a new coordinated cruise control strategy for each train based on the neighboring trains’ information, under which each train can track the desired speed, and the headway distances between any two neighboring trains are stabilized in a safety range. Numerical examples are given to illustrate the effectiveness of the proposed methods.     

A new approach for improving the performance of freight train timetabling of a single-track railway system

A new approach for improving the performance of freight train timetabling for single-track railways is proposed. Using the idea of a fixed-block signaling system, we develop a matrix representation to express the occupation of inter- and intra-station tracks by trains illustrating the train blocking time diagram in its entirety. Train departure times, dwell times, and unnecessary stopping are adjusted to reduce average train travel time and single train travel time. Conflicts between successive stations and within stations are identified and solved. A fuzzy logic system is further used to adjust the range of train departure times and checks are made to determine whether dwell times and time intervals can be adjusted for passenger and freight trains at congested stations to minimize train waiting times. By combining manual scheduling expertise with the fuzzy inference method, timetable efficiency is significantly improved and becomes more flexible.     

Train rescheduling model with train delay and passenger impatience time in urban subway network

This paper considers the train rescheduling problem with train delay in urban subway network. With the objective of minimizing the negative effect of train delay to passengers, which is quantified with a weighted combination of travel time cost and the cost of giving up the planned trips, train rescheduling model is proposed to jointly synchronize both train delay operation constraints and passenger behavior choices. Space–time network is proposed to describe passenger schedule‐based path choices and obtain the shortest travel times. Impatience time is defined to describe the intolerance of passengers to train delay. By comparing the increased travel time due to train delay with the passenger impatience time, a binary variable is defined to represent whether the passenger will give up their planned trips or not. The proposed train rescheduling model is implemented using genetic algorithm, and the model effectiveness is further examined through numerical experiments of real‐world urban subway train timetabling test. Duration effects of the train delay to the optimization results are analyzed. Copyright © 2017 John Wiley & Sons, Ltd.     

Train routing and timetabling problem for heterogeneous train traffic with switchable scheduling rules

This paper proposes a mathematical model for the train routing and timetabling problem that allows a train to occasionally switch to the opposite track when it is not occupied, which we define it as switchable scheduling rule. The layouts of stations are taken into account in the proposed mathematical model to avoid head-on and rear-end collisions in stations. In this paper, train timetable could be scheduled by three different scheduling rules, i.e., no switchable scheduling rule (No-SSR) which allows trains switching track neither at stations and segments, incomplete switchable scheduling rule (In-SSR) which allows trains switching track at stations but not at segments, and complete switchable scheduling rule (Co-SSR) which allows trains switching track both at stations and segments. Numerical experiments are carried out on a small-scale railway corridor and a large-scale railway corridor based on Beijing–Shanghai high-speed railway (HSR) corridor respectively. The results of case studies indicate that Co-SSR outperforms the other two scheduling rules. It is also found that the proposed model can improve train operational efficiency.     

Energy-efficient operation of rail vehicles

This paper describes an analytical process that computes the optimal operating successions of a rail vehicle to minimize energy consumption. Rising energy prices and environmental concerns have made energy conservation a high priority for transportation operations. The cost of energy consumption makes up a large portion of the Operation and Maintenance (O&M) costs of transit especially rail transit systems. Energy conservation or reduction in energy cost may be one of the effective ways to reduce transit operating cost, therefore improve the efficiency of transit operations.From a theoretical point of view, the problem of energy efficient train control can be formulated as one of the functions of Optimal Control Theory. However, the classic numerical optimization methods such as discrete method of optimum programming are too slow to be used in an on-board computer even with the much improved computation power, today. The contribution of this particular research is the analytical solution that gives the sequence of optimal controls and equations to find the control change points. As a result, a calculation algorithm and a computer program for energy efficient train control has been developed. This program is also capable of developing energy efficient operating schedules by optimizing distributions of running time for an entire route or any part of rail systems.We see the major application of the proposed algorithms in fully or partially automated Train Control Systems. The modern train control systems, often referred as “positive” train control (PTC), have collected a large amount of information to ensure safety of train operations. The same data can be utilized to compute the optimum controls on-board to minimize energy consumption based on the algorithms proposed in this paper. Most of the input data, such as track plan, track profile, traction and braking characteristics, speed limits and required trip time are located in an on-board database and/or they can be transmitted via radio link to be processed by the proposed algorithm and program.     

Aural comfort prediction method for high-speed trains under complex tunnel environments

Aural comfort is negatively affected during a train’s passage through various tunnel environments. The objective of this study was to propose a prediction model for determining optimal operation parameter combinations to improve train occupants’ aural comfort. High-speed train model tests, combined with a mathematical transfer model, were used to obtain the interior pressure transients under varying speeds, tunnel lengths and seal indexes. Then, a middle ear finite element model was used to simulate the dynamic responses under the pressure transients, and three indicators were employed to assess the severity of aural sensations. Meanwhile, the aural discomfort were classified into four groups according to the duration. Based on the simulation results, the ordinal regression analysis method was used to reveal the effects of the considered factors on aural comfort. The results indicate that aural discomfort sensations begin when a train runs in the middle of a tunnel but are mitigated when it approaches the tunnel exit. Furthermore, aural discomfort is positively correlated with the train speed and the distance from the driver cabin of the head car but negatively correlated with the seal index and tunnel length. As a conclusion, a mathematical prediction model was established that incorporates factors including the train speed, seal index, tunnel length and car position. It can not only forecast aural sensations under certain operation parameters and tunnel environments but also be used for determining the optimal operation parameters to ensure the best aural sensations for high-speed-train occupants.     

Real-time energy consumption minimization in railway networks

A new timetable must be calculated in real-time when train operations are perturbed. Although energy consumption is becoming a central issue both from the environmental and economic perspective, it is usually neglected in the timetable recalculation. In this paper, we formalize the real-time Energy Consumption Minimization Problem (rtECMP). It finds in real-time the driving regime combination for each train that minimizes energy consumption, respecting given routing and precedences between trains. In the possible driving regime combinations, train routes are split in subsections for which one of the regimes resulting from the Pontryagin’s Maximum Principle is to be chosen. We model the trade-off between minimizing energy consumption and total delay by considering as objective function their weighted sum. We propose an algorithm to solve the rtECMP, based on the solution of a mixed-integer linear programming model. We test this algorithm on the Pierrefitte-Gonesse control area, which is a critical area in France with dense mixed traffic. The results show that the problem is tractable and an optimal solution of the model tackled can often be found in real-time for most instances.     

高速列车荷载作用下仰拱对隧道整体动力特性的影响分析

仰拱作为隧道衬砌的重要组成部分,其设置对改善隧道结构受力状况,提高隧道结构的整体稳定性都非常重要。但在列车激振荷载作用下,仰拱在隧道整体结构中所发挥的作用还需要进一步研究。文章通过数值分析方法,从动力学角度对仰拱在高速铁路隧道列车振动响应中的作用和影响进行了探讨;比较了不同仰拱形式下隧道结构各控制点的动力学特性及衬砌和围岩受力特性,可为隧道仰拱设置中综合考虑动静力影响提供参考。     

Ant colony optimization for the real-time train routing selection problem

This paper deals with the real-time problem of scheduling and routing trains in a railway network. In the related literature, this problem is usually solved starting from a subset of routing alternatives and computing the near-optimal solution of the simplified routing problem. We study how to select the best subset of routing alternatives for each train among all possible alternatives. The real-time train routing selection problem is formulated as an integer linear programming formulation and solved via an algorithm inspired by the ant colonies’ behavior. The real-time railway traffic management problem takes as input the best subset of routing alternatives and is solved as a mixed-integer linear program. The proposed methodology is tested on two practical case studies of the French railway infrastructure: the Lille terminal station area and the Rouen line. The computational experiments are based on several practical disturbed scenarios. Our methodology allows the improvement of the state of the art in terms of the minimization of train consecutive delays. The improvement is around 22% for the Rouen instances and around 56% for the Lille instances.     

Online distributed cooperative model predictive control of energy-saving trajectory planning for multiple high-speed train movements

The cooperative energy-efficient trajectory planning for multiple high-speed train movements is considered in this paper. We model all the high-speed trains as the agents that can communicate with others and propose a local trajectory planning control model using the Model Predictive Control (MPC) theory. After that we design an online distributed cooperative optimization algorithm for multiple train trajectories planning, under which each train agent can regulate the trajectory planning procedure to save energy using redundancy trip time through tuning ACO’s heuristic information parameter. Compared to the existing literature, the vital distinctions of our work lies not only on the online cooperative trajectory planning but also on the distributed mechanism for multiple high-speed trains. Experimental studies are given to illustrate the effectiveness of the proposed methods with the practical operational data of Wuhan-Guangzhou High-speed Railway in China.     

Closed form models to assess railroad technology investments

ABSTRACT

Class I railroads in North America collectively invested USUS$11.2 billion to comply with a U.S. federal mandate to deploy positive train control as a form of train protection system. This amount dwarfs the potential savings from accidents the technology could prevent. Therefore, railroads must seek additional benefits. This research contributes simple closed-form models to inform strategies that can leverage the technology deployment by estimating the annual additional net benefits, internal rate of return, and benefit-cost ratio needed for a desired payback period.     

Nonlinear programming methods based on closed-form expressions for optimal train control

This paper proposes a novel approach to solve the complex optimal train control problems that so far cannot be perfectly tackled by the existing methods, including the optimal control of a fleet of interacting trains, and the optimal train control involving scheduling. By dividing the track into subsections with constant speed limit and constant gradient, and assuming the train’s running resistance to be a quadratic function of speed, two different methods are proposed to solve the problems of interest. The first method assumes an operation sequence of maximum traction – speedholding – coasting – maximum braking on each subsection of the track. To maintain the mathematical tractability, the maximum tractive and maximum braking functions are restricted to be decreasing and piecewise-quadratic, based on which the terminal speed, travel distance and energy consumption of each operation can be calculated in a closed-form, given the initial speed and time duration of that operation. With these closed-form expressions, the optimal train control problem is formulated and solved as a nonlinear programming problem. To allow more flexible forms of maximum tractive and maximum braking forces, the second method applies a constant force on each subsection. Performance of these two methods is compared through a case study of the classic single-train control on a single journey. The proposed methods are further utilised to formulate more complex optimal train control problems, including scheduling a subway line while taking train control into account, and simultaneously optimising the control of a leader-follower train pair under fixed- and moving-block signalling systems.     

Commuter rail accessibility and house values: The case of the Montreal South Shore,Canada, 1992–2009

While public transportation (PT) plays a crucial role in the social and environmental dimensions, its impacts on the location rent remain poorly known. However, there is a strong connection between PT infrastructures and real estate markets since the former may generate externalities that can influence sales prices. This paper aims at estimating the actual effect of implementing a commuter train service between a major city (Montreal, Canada) and its southern periphery occurring in 2000–2003. Using a difference-in-differences (DID) estimator in the hedonic price model for single-family house sales between 1992 and 2009, the paper estimates the direct marginal price impact of a new commuter train service following changes in access to stations. Results suggest that the opening of a new commuter train service on the Montreal South Shore generates a location premium for houses located in the stations’ vicinity (as measured through walking distance and car driving time) as opposed to houses that do not experience any improvement in accessibility to the commuter train service, either in space or in time. In addition, the new service raises property tax income for involved municipalities by several million dollars a year through enhanced property values.     

Train design features affecting boarding and alighting of passengers

Accurately predicting train dwell time is critical to running an effective and efficient service. With high‐density passenger services, large numbers of passengers must be able to board and alight the train quickly – and within scheduled dwell times. Using a specially constructed train mock‐up in a pedestrian movement laboratory, the experiments outlined in this paper examine the impact of train carriage design factors such as door width, seat type, platform edge doors and horizontal gap on the time taken by passengers to board and alight. The findings illustrate that the effectiveness of design features depends on whether there are a majority of passengers boarding or alighting. An optimum door width should be between 1.7 and 1.8 m. The use of a central pole and platform edge doors produced no major effects, but a 200 mm horizontal gap could increase the movement of passengers. There is no clear effect of the type of seats and neither the standbacks between 50, 300 and 500 mm. Further research will look for the relationship between the dwell time and the characteristics of passengers such as personal space. Copyright © 2017 John Wiley & Sons, Ltd.