A GIS‐based traffic analysis zone design: technique

The main purpose of this paper is to develop an efficient method to design traffic analysis zones (TAZs), which is necessary for implementing a planning process with Geographic Information System (GIS) for Transportation (GIS‐T), using statistical spatial data analyses and GIS technology. The major roles of GIS in this method are: (1) to produce basic spatial units (BSUs) with topological data structure; (2) to integrate various procedures during the TAZ generation including computer program routines; and (3) to visualize the output of each TAZ generation. One of the most significant reasons for obtaining well‐defined TAZs is the fact that they are defined at the outset of transportation demand modeling, used from trip generation to trip assignment, and will ultimately affect transportation policy decisions.

Toward obtaining well‐defined TAZs, this paper concentrates on two important constraints: homogeneity and contiguity. Iterative partitioning technique is adopted to promote the optimum homogeneity of generated TAZs, while a contiguity checking algorithm is developed to ensure contiguous TAZs are generated by the iterative partitioning technique.     

What transportation modeling needs from a GIS: a conceptual framework

Both the geographic information system (GIS) and transportation modeling environments have seen continually developing analytic concepts and techniques. However, these developments have seldom resulted in the integration of GISs and transportation models. This paper explores the potential inherent in merging of these environments through a systematic investigation of the fundamental basis of integration. To do this, the traditional four step transportation modeling process is extended to include input and output steps. We then define functional components for GIS data handling — data management, manipulation, and analysis. The steps of modeling are matched against the list of GIS data handling functions within a matrix‐based framework. GIS functions that enhance a land‐use based urban transportation modeling process are then categorized. Conclusions are drawn and directions for future developments are discussed.     

Integrating GIS concepts into transportation network data structures

Transportation network data structures must be designed to meet the requirements of the analyses being conducted and must be compatible with the selected graphical user interface. Increasing interest in geographic information systems (GIS) and intelligent transportation systems (ITS) have further burdened the network data structure. It is possible to implement object oriented programming (OOP) technology to satisfy these needs, without making the data structure excessively complicated.

This paper shows how a well‐developed network data structure can incorporate major capabilities normally associated with stand‐alone GIS's. The design of a network data structure derives from both theoretical and practical considerations. A design of a network data structure, composed entirely of objects, is presented. Examples of its implementation, limitations, advantages, and possible extensions are drawn from experience with the General Network Editor (GNE).     

Performance measures and data requirements for congestion management systems

Many metropolitan areas have started programs to monitor the performance of their transportation network and to develop systems to measure and manage congestion. This paper presents a review of issues, procedures, and examples of application of geographic information system (GIS) technology to the development of congestion management systems (CMSs). The paper examines transportation network performance measures and discusses the benefit of using travel time as a robust, easy to understand performance measure. The paper addresses data needs and examines the use of global positioning system (GPS) technology for the collection of travel time and speed data. The paper also describes GIS platforms and sample user interfaces to process the data collected in the field, data attribute requirements and database schemas, and examples of application of GIS technology for the production of maps and tabular reports.     

Data display techniques for transportation analysis and planning: an investigation of three computer‐produced graphics

Graphics are a powerful but often costly means of communication. Computer‐drawn graphics offer a new and relatively inexpensive way to assist the communication of complex technical information to both planners and non‐technical people whose full potential is now beginning to be realized. This paper discusses the utility of graphics and introduces three computer‐drawn graphic techniques which may be useful, both for analysis and presentation of results, in the transportation planning process. CENVUE(S) produces a three‐dimensional, perspective‐view map, on which virtually any type of transportation data or performance indicator can be displayed. VAP is designed to display origin‐destination travel patterns in any region. TDN transforms a physical‐distance network into a time‐distance network so that effects of different speeds in the transportation network can be readily seen. The cost‐effectiveness of each technique is briefly discussed and some recommendations for evaluating computer graphics techniques are provided to aid the user in further assessing their utility in the transportation planning process.     

GIS and network models: Issues for three potential applications

Geographic Information Systems (GISs) are now being developed for urban transportation planning and modeling. Supporting other recent work, this paper demonstrates the combination of GIS and network-based, urban transportation planning (UTP) modeling software to create powerful tools for the analysis of policies and plans. Following a literature review and informal survey identifying GIS and UTP modeling software in use at transportation agencies, three applications of GIS for network modeling and relevant issues are discussed: 1) developing or modifying UTP models, 2) incorporating network data into a GIS framework, and 3) creating and using a high-speed interactive system suitable for providing near real-time alternatives and policy analysis. Some specific suggestions are made related to the use of two software products, and extensions to other platforms are noted. Conclusions allude to the potential of such systems while realistically pointing to the present difficulties and magnitude of effort that will be required.     

Intermodal and international freight network modeling

The authors describe the development and application of a single, integrated digital representation of a multimodal and transcontinental freight transportation network. The network was constructed to support the simulation of some five million origin to destination freight shipments reported as part of the 1997 United States Commodity Flow Survey. The paper focuses on the routing of the tens of thousands of intermodal freight movements reported in this survey. Routings involve different combinations of truck, rail and water transportation. Geographic information systems (GIS) technology was invaluable in the cost-effective construction and maintenance of this network and in the subsequent validation of mode sequences and route selections. However, computationally efficient routing of intermodal freight shipments was found to be most efficiently accomplished outside the GIS. Selection of appropriate intermodal routes required procedures for linking freight origins and destinations to the transportation network, procedures for modeling intermodal terminal transfers and inter-carrier interlining practices, and a procedure for generating multimodal impedance functions to reflect the relative costs of alternative, survey reported mode sequences.     

The use of GIS and relational database management systems to improve the scheduling operations of paratransit

The scheduling operations of many paratransit agencies in the United States are undertaken manually. Those customers who are eligible to travel call in their requests the day before the trip is needed. As the trip requests are received, they are entered into a list of unscheduled trips. In order to schedule these trips, the scheduler must first determine the number of drivers and shuttle buses that are available as well as the time of availability of each. The scheduler must then try to match the rides that are in “similar” areas around the “same” time to place together on the driver's schedule. As new trip requests are made, the schedulers must adjust the trips that are already scheduled to try and schedule as many trips as possible in the most efficient way.

By developing a system that would improve the scheduling system operations of, in this case, DART (Delaware Administration for Regional Transit) First State Paratransit, customers can expect to receive better service that will improve their ability to travel throughout the community. Some devices that could also improve the operations of paratransit agencies are described in this paper, such as satellite‐based Global Positioning System (GPS), radio communication systems, mobile computers, radio frequency‐based data communication systems, internet web pages, automated paratransit information systems, and card‐based data storage and transfer media. However, because paratransit systems are difficult to operate cost‐efficiently, the optimum and most cost‐efficient device must be selected. The system chosen for DART First State Paratransit includes the use of a relational database management system (RDMS) and a transportation Geographic Information System (GIS). RDMS keeps track of the database information as well as the scheduled trips and the GIS is ideal for analyzing both geographic and temporal data. This system is shown to be superior to the manual system.     

Development of a transit network from a street map database with spatial analysis and dynamic segmentation

This paper presents an integrated transit-oriented travel demand modeling procedure within the framework of geographic information systems (GIS). Focusing on transit network development, this paper presents both the procedure and algorithm for automatically generating both link and line data for transit demand modeling from the conventional street network data using spatial analysis and dynamic segmentation. For this purpose, transit stop digitizing, topology and route system building, and the conversion of route and stop data into link and line data sets are performed. Using spatial analysis, such as the functionality to search arcs nearest from a given node, the nearest stops are identified along the associated links of the transit line, while the topological relation between links and line data sets can also be computed using dynamic segmentation. The advantage of this approach is that street map databases represented by a centerline can be directly used along with the existing legacy urban transportation planning systems (UTPS) type travel modeling packages and existing GIS without incurring the additional cost of purchasing a full-blown transportation GIS package. A small test network is adopted to demonstrate the process and the results. The authors anticipate that the procedure set forth in this paper will be useful to many cities and regional transit agencies in their transit demand modeling process within the integrated GIS-based computing environment.     

A Multiple Criteria Decision‐Making Approach for Prioritizing Accident Hotspots in the Absence of Crash Data

Abstract

In an efficient transportation system, traffic safety is an important issue and it is influenced by many factors. In a country like Iran, until now safety improvements are mainly concentrated on road engineering activities, without much attention for vehicle technology or driving behaviour. One important aspect of road safety engineering activities is the so‐called treatment of hotspots or dangerous accident locations. Until recently, accident hotspots were identified and remedied by the esxperts’ personal judgements and a handful of statistics without taking into account other important factors such as geometric and traffic conditions of the road network. This paper therefore aims to define and identify the criteria for accident hotspots, then giving a value to each criterion in order to develop a model to prioritize accident hotspots when traffic accident data is not available. To do this, the ‘Delphi’ method has been adopted and a prioritization model is produced by the use of a ‘Multiple Criteria Decision‐Making’ method. The procedure is illustrated on a collection of 20 road sections in Iran. In addition, the model is validated against an existing database of road sections containing safe locations and hotspots. Finally, a sensitivity analysis is carried out on the proposed method.     

Geographic information system design for network equilibrium-based travel demand models

Travel demand analyses are useful for transportation planning and policy development in a study area. However, travel demand modeling faces two obstacles. First, standard practice solves the four travel components (trip generation, trip distribution, modal split and network assignment) in a sequential manner. This can result in inconsistencies and non-convergence. Second, the data required are often complex and difficult to manage. Recent advances in formal methods for network equilibrium-based travel demand modeling and computational platforms for spatial data handling can overcome these obstacles. In this paper we report on the development of a prototype geographic information system (GIS) design to support network equilibrium-based travel demand models. The GIS design has several key features, including: (i) realistic representation of the multimodal transportation network, (ii) increased likelihood of database integrity after updates, (iii) effective user interfaces, and (iv) efficient implementation of network equilibrium solution algorithms.     

Technological innovations in the transport sector: the need for cooperation to meet environmental interests

Environmental problems have become urgent in many countries. A large contribution to the solution of environmental problems is expected from technological change. This raises the issue of how technological change takes place, and more in particular how technological change can be promoted that is beneficial to long term sustainability objectives.

In the paper we discuss this topic in the context of the transport sector. This is relevant because transportation contributes significantly to various types of pollution, existing trends might lead to even more negative impacts and finally there are high expectations about the potential of future technological development to reduce the environmental impact of transportation.

We approach the issue of technological change towards more environmentally sound development from the perspective of technology dynamics and sustainable development. We argue that additional theoretical insights are needed especially when one wants to study technological change in the context of environmental problems. We therefore discuss a strategy of cooperation between government and firms in network. Special attention is paid to the role of the government in networks and the use of a new type of instruments.     

A planning model for multiple‐mode transportation system operations

The problem of generating a set of “good” transportation alternatives during the early and intermediate stages of transportation planning is addressed in this paper. A linear programming model of a multi‐modal transportation system is developed. The model is run interactively to determine optimal operating levels for all modes for various transport policy decisions. The model described is a component of a composite network generation model incorporating dynamic changes. The linear programming component determines optimal operating policies for given points in time. The composite model incorporates these in a dynamic programming framework to determine optimal staged investment policies over several time periods.     

Selatm — a GIS based program for evaluating the safety benefits of local area traffic management schemes

Particular safety problems relate to traffic on local streets. Local Area Traffic Management (LATM) schemes are often implemented with the objective of counteracting these safety problems. One analytical difficulty in appraising the effectiveness of LATM in dealing with safety problems has been the ‘footloose’ nature of accident locations in a local street network. Seldom are there distinct ‘blackspot’ locations. An area‐wide approach is needed and the interaction between the system and arterial road network must be considered. The paper describes the development of a Safety Evaluation Method for Local Area Traffic Management (termed SELATM). It is a GIS‐based program for analysing accident patterns over time and the evaluation of the safety benefits of LATM schemes. The evaluation is perform at different network levels for various accident variables. The thrust of the program involved the integration of network data with data on accidents and the installed devices to generate summary accident statistics for the various network levels allowing for before and after comparison with a control area. This program as developed is applied to a LATM scheme at Enfield, a suburb in metropolitan Adelaide.     

Enhancing stated preference surveys in transportation research: the contribution of geographic information systems

In this paper we argue that visualization, data management and computational capabilities of geographic information systems (GIS) can assist transportation stated preference research in capturing the contextual complexity of many transportation decision environments by providing respondents with maps and other spatial and non-spatial information in graphical form that enhance respondents' understanding of decision scenarios. We explore the multiple inherent contributions of GIS to transportation stated preference data collection and propose a framework for a GIS-based stated preference survey instrument. We also present the design concepts of two survey prototypes and their GIS implementation for a sample travel mode choice problem.     

Identifying the spatial distribution of public transportation trips by node and community characteristics

ABSTRACT

Identifying the spatial distribution of travel activities can help public transportation managers optimize the allocation of resources. In this paper, transit networks are constructed based on traffic flow data rather than network topologies. The PageRank algorithm and community detection method are combined to identify the spatial distribution of public transportation trips. The structural centrality and PageRank values are compared to identify hub stations; the community detection method is applied to reveal the community structures. A case study in Guangzhou, China is presented. It is found that the bus network has a community structure, significant weekday commuting and small-world characteristics. The metro network is tightly connected, highly loaded, and has no obvious community structure. Hub stations show distinct differences in terms of volume and weekend/weekday usage. The results imply that the proposed method can be used to identify the spatial distribution of urban public transportation and provide a new study perspective.     

Route structures in air transportation—the situation in the federal republic of Germany

This paper deals with route structures in air transportation in general and describes the derivation of such structures. Based on an extensive analysis of scheduled air traffic in Germany, an overview of the situation in domestic and international air travel is given. In particular, relationships were found which permit—in connection with a number of influencing factors—to derive from the present situation route structures, which are also valid for a future year.

This approach was used for the assignment of origin‐destination‐passenger flows to air network routes in a forecast of demand and services in commercial air transportation of the Federal Republic of Germany for the year 1995.     

Geographic information systems for transportation in perspective

The late 1980s saw the first widespread use of Geographic Information Systems (GIS) in transportation research and management. Due to the specific requirements of transportation applications and of the rather late adoption of this information technology in transportation, research has been directed toward enhancing existing GIS approaches to enable the full range of capabilities needed in transportation research and management. This paper places the concept of transportation GIS in the broader perspective of research in GIS and Geographic Information Science. The emphasis is placed on the requirements specific of the transportation domain of application of this emerging information technology as well as on core research challenges.     

Constrained H∞ control of urban transportation network

Because transportation systems involve massive complex human activities, there exist substantial unpredictable uncertainties of the traffic demands. This paper aims at presenting an H_∞ control method for transportation network that can enhance the tolerance of the system due to these uncertainties. In particular, the store‐and‐forward approach is applied to model the system into a linear form. Then, a detailed controllability analysis shows that the system is not completely controllable by taking the constraints on the green times into account. This makes difficult to apply directly the H_∞ method. To overcome this difficulty, this paper isolates the fully controllable part of the transportation system, and the problem of disturbance attenuation is then solved by means of a convex optimization with linear matrix inequality. Finally, the simulation of a large‐scale hypothetical network is carried out to illustrate the results. Copyright © 2014 John Wiley & Sons, Ltd.