Forecasting automobile petrol demand in Australia: An evaluation of empirical models

Transport fuel consumption and its determinants have received a great deal of attention since the early 1970s. In the literature, different types of modelling methods have been used to estimate petrol demand, each having methodological strengths and weaknesses. This paper is motivated by an ongoing need to review the effectiveness of empirical fuel demand forecasting models, with a focus on theoretical as well as practical considerations in the model-building processes of different model forms. We consider a linear trend model, a quadratic trend model, an exponential trend model, a single exponential smoothing model, Holt’s linear model, Holt–Winters’ model, a partial adjustment model (PAM), and an autoregressive integrated moving average (ARIMA) model. More importantly, the study identifies the difference between forecasts and actual observations of petrol demand in order to identify forecasting accuracy. Given the identified best-forecasting model, Australia’s automobile petrol demand from 2007 through to 2020 is presented under the “business-as-usual” scenario.     

Social distancing in public transport: mobilising new technologies for demand management under the Covid-19 crisis

Dense urban areas are especially hardly hit by the Covid-19 crisis due to the limited availability of public transport, one of the most efficient means of mass mobility. In light of the Covid-19 pandemic, public transport operators are experiencing steep declines in demand and fare revenues due to the perceived risk of infection within vehicles and other facilities. The purpose of this paper is to explore the possibilities of implementing social distancing in public transport in line with epidemiological advice. Social distancing requires effective demand management to keep vehicle occupancy rates under a predefined threshold, both spatially and temporally. We review the literature of five demand management methods enabled by new information and ticketing technologies: (i) inflow control with queueing, (ii) time and space dependent pricing, (iii) capacity reservation with advance booking, (iv) slot auctioning, and (v) tradeable travel permit schemes. Thus the paper collects the relevant literature into a single point of reference, and provides interpretation from the viewpoint of practical applicability during and after the pandemic.

     

The demand for public transport. part II. supply and demand factors of public transport

Abstract

This two‐part article, concerned with the way public transport ridership is affected by the various relevant factors, is based on the Executive Summary of The Demand for Public Transport (Webster and Bly 1980), the report of the TRRL‐sponsored International Collaborative Study on Factors Affecting Public Transport Patronage. Part I of the article, which was concerned with the social and economic conditions in which public transport operates, showed the importance of the background factors such as income, car ownership and land use on public transport usage: it also indicated how the longer‐term impacts of the more direct demand factors (fares, service levels) often show themselves in changes in car ownership levels, activity patterns (i.e. where people live, work, shop, socialize, etc) and land‐use development.

Part II reviews the current state of knowledge on the effects of changes in fare levels and quality of service and of the introduction of various traffic and transport measures (traffic restraint, bus priority, etc): it outlines current methodology on costing public transport services and draws the supply and demand sides together in a consideration of particular strategies which are at the disposal of the operator, the planner and the policy maker.     

Overview of new technology information systems for public transport passengers in French towns

Cost–benefit analysis (CBA) for transport investments is particularly useful for situations where a large number of investments have to be ranked against each other. This study draws on experiences from the development of the Swedish National Transport Investment Plan 2010–21. We study how CBA results were used in the process of shaping the investment plan and what influence they had on investment decisions. In particular, we compare the planners' rankings versus the politicians' rankings. We find that planners' rankings of investments are influenced by benefit–cost ratios (BCRs), in particular for low and moderate BCRs, while the politicians' rankings are not. By interviewing planners about how CBA was used in the process, we clarify what role CBA actually played in the planning process. We find that not only did the CBAs play a role in investment selection, they also forced investment design to be more cost-efficient. Furthermore, we explore planners' implicit valuations, as revealed by their investment selection, finding that freight benefits were implicitly valued higher and traffic safety lower than the officially recommended CBA weights. Finally, we identify the most important areas for improvement of CBA state-of-practice methodology.     

Freight transport demand revisited: A microeconomic view of multimodal, multicharacteristic service uncertainty and the demand for freight transport

This paper provides a unifying framework for micro-based models of freight transport demand. An expected utility of profits model is posed that clarifies the conditions under which a system of equations (continuous) regression model should be used as opposed to the conditions that make a quantal choice model appropriate. The model also indicates the nature of subjective data that is necessary for estimating demand. In general, the conditions that give rise to the appropriate use of a quantal choice model imply that the needed subjective information is completely contained in the subjective probability distributions on the service characteristics; the utility function itself is irrelevant.     

Simulation and analysis of energy demand for passenger automobiles in Australia

The demand for gasoline for auto passenger travel has been identified to be the most crucial aspect of energy policy in Australia. Qualitative as well as quantitative analysis has been presented to explore the energy saving potential of various measures in reducing travel demand and in making travel more energy efficient. A computer simulation model has also been developed to assess future fuel demand for automobiles in Australia in response to a variety of assumptions about social, economic, technological and policy variables. On the basis of the present analysis it is concluded that the passenger travel demand is less likely to be contained but a combination of conservation and efficiency measures can significantly reduce the energy intensity, thereby controlling the gasoline demand in the next 25 years to present consumption levels.     

An assessment of advanced transport telematics evaluation procedures

This paper reviews and critically assesses procedures which have been adopted to evaluate Advanced Transport Telematics (ATT) projects. The importance of such a review at this juncture stems from the changing position of ATT in transport planning. ATT is no longer simply a field for experimentation, where technical feasibility and user acceptance are dominant concerns. Rather it is a potential mainstream contributor to the functioning of road transport systems. For this reason, ATT project appraisal needs to be developed to the same form, level of sophistication and consistency as the appraisal of conventional transport infrastructure investment. Based on the review set out here, we argue that appropriate methods have not yet been established which, in turn, poses a number of challenging questions, since current socio‐economic evaluation procedures are not directly suited to either measuring or evaluating many of the impacts which ATT schemes are implemented to achieve.     

A new approach to evaluating on-road public transport priority projects: balancing the demand for limited road-space

Despite widespread growth in on-road public transport priority schemes, road management authorities have few tools to evaluate the impacts of these schemes on all road users. This paper describes a methodology developed in Melbourne, Australia to assist the road management authority, VicRoads, evaluate trade-offs in the use of its limited road-space for new bus and tram priority projects. The approach employs traffic micro-simulation modelling to assess road-space re-allocation impacts, travel behaviour modelling to assess changes in travel patterns and a social cost benefit framework to evaluate impacts. The evaluation considers a comprehensive range of impacts including the environmental benefits of improved public transport services. Impacts on public transport reliability improvements are also considered. Although improved bus and tram reliability is a major rationale for traffic priority its use in previous evaluations is rare. The paper critiques previous approaches, describes the proposed method and explores some of the results found in its application. A major finding is that despite a more comprehensive approach to measuring the benefits of bus and tram priority, road-space reallocation is difficult to economically justify in road networks where public transport usage is low and car usage high. Strategies involving the balanced deployment of bus and tram priority measures where the allocation of time and space to PT minimises negative traffic impacts is shown to improve the overall management of road-space. A discussion of the approach is also provided including suggestions for further methodology development.

Tree-building with complex cost structures — A new algorithm for incorporation into transport demand models

This paper highlights some of the difficulties involved in the implementation of complex cost structures in the tree-building section of a transport demand model. The conventional tree-building algorithm is briefly described and is seen to be inadequate for the present purpose. A new algorithm is then presented which is able to implement complex cost structures properly. An example is given of the application of this algorithm to the building of tree in a public transport network. The performance of a computer program incorporating the new alrogrithm is evaluated against alternative methods of implementing complex cost structures. Some mention is then made of the vast range of potential uses for the new algorithm in the field of transport modelling and simulation.     

Ex ante assessment of safety issues of new technologies in transport

New technologies in traffic can produce a range of unknown and unplanned deviations which require attention when assessing such technologies for market implementation. Current assessment methods focus on expected and usually desired effects and do not include identification and analyses of all kinds of other effects resulting from processes other than the desired processes. In this paper a method called HAZOP (Hazard and Operability analysis), originally developed for identifying unintended safety problems in chemical processes, is introduced and applied in order to analyse the added value of this method for large scale pilots with intelligent transport systems. The paper discusses the additional potential safety problems which the HAZOP identifies, that should be analysed before implementation of intelligent speed adaptation in daily traffic can be considered.     

Meta-analysis of public transport demand

The present study uses meta-regression in order to explain the wide variation in elasticity estimates obtained in previous demand studies, and provide summaries of several bus demand elasticities.One important finding as to the price elasticity is that the often cited rule of thumb of −0.3 holds good if quality of service represented by vehicle-kilometres is treated as an exogenous variable, but not when it is treated as endogenous.Based on the results it is recommended that demand models should include car ownership, price of petrol, own price, income and some measure of service among the explanatory variables and that the service variable should be treated as endogenous.In previous meta-studies in this field focus has been on own price elasticity only while this study also includes elasticities with respect to, level of service, income, price of petrol and car ownership. The short run for the US are found to be −0.59, 1.05, −0.62, 0.4 and −1.48 respectively.     

Urban public transport in Australia

Urban public transport in Australia has been the responsibility of State governments. The National government has indicated that it wishes to assume some financial responsibilities for capital programmes, but not for funding of operational deficits. This paper is a review of the problems of the urban public transport industry. Economic, social and financial issues are examined in the context of these changing governmental responsibilities.     

An assessment of models to estimate pedestrian demand based on the level of activity

This paper presents the development and assessment of models to estimate pedestrian demand based on the level of pedestrian activity (high and low). As activity varies by the time of the day, temporal variations were evaluated by considering different time periods. Data collected at 128 low and 48 high pedestrian activity signalized intersections (a total of 176 signalized intersections) in the City of Charlotte, North Carolina were used to develop and assess the models using stepwise regression analysis through backward elimination of independent variables (includes demographic, land use, and network characteristics). The use of different buffer widths (proximal area) to extract these characteristics was also evaluated. Results, in general, show that pedestrian demand varied by the level of activity, explanatory variables extracted by buffer width, and time of the day. The estimates from the models could be used in transportation planning (identify required pedestrian facilities, resource allocation), safety, and operational analyses. Copyright © 2010 John Wiley & Sons, Ltd.     

Aggregate expenditure elasticity for transport and communication in Australia

For the purpose of estimating Engel elasticity, one needs to find the best functional form among various alternatives. In this paper, a new function, which is called the double semi-log Engel function turns out to be the best functional form for the transport and communication items in Australia on the basis of the distance function (D²) criterion, and the non-nested hypothesis testing procedure. This function is then used to estimate total expenditure elasticity, and the percentage change in consumer demand due to changes in total expenditure and total expenditure inequalities; using the 1975–76 Household Expenditure Survey data. The results of the analyses demonstrate that transport and communication is a necessary item in Australia on the basis of two criteria, viz., its elasticity is not significantly greater than unity, and the percentage change in demand increases with a decrease of the total expenditure inequality [emphasised by Iyengar (I960)]. Policy implication of the analyses has also been discussed.     

Framework for designing sample travel surveys for transport demand modelling in cities

Transportation - Travel surveys in cities remain the main source of information for obtaining people’s trip characteristics and developing transport models that serve to predict the...     

Coping with uncertainty: an expedition into the field of new transport technology

Many decisions taken by mankind are rational only to a limited extent. This holds for individual travel behaviour, but also for long-range strategic decisions on transport systems or transport technology. In any decision problem, coping with uncertainty is the most critical element. The introduction of new transport technology is surrounded by uncertainty. For example, there is uncertainty about the pace and extent of adoption of new technology and there is uncertainty about the impact of new technology in terms of increased sustainability or increased efficiency. This article maps uncertainty surrounding new transport technology and identifies ways in which to deal with uncertainty in policy making. The findings will be illustrated with electric vehicles, particularly with two specific strategies to deal with uncertainty: interactive technology watching and experimentation in a market niche. The paper concludes with a discussion of success factors that influence the outcomes of such strategies.     

The Gini index of demand imbalances in public transport

Transportation - The paper studies a general bidirectional public transport line along which demand varies by line section. The length of line sections also varies, and therefore their contribution...     

Transfer demand prediction for timed transfer coordination in public transport operational control

Timed transfer coordination in public transit reduces passenger transfer time by providing seamless interconnected transfers. The problem arises when a Receiving Vehicle (RV) arrives to the transfer stop before a Feeding Vehicle (FV) carrying transferring passengers. Timed transfer coordination in operational control dynamically decides whether a RV is held at the transfer stop to allow transfers, or departs as scheduled. While transfer demand is essential for implementing timed transfer coordination, this variable is generally not available in public transit because of the lack of passenger transfer plans. The problem of acquiring this variable in real‐time has also received limited attention in the related literature. This paper proposes a new method to dynamically predict the transfer demand. We anticipate the transferring probability from each individual passenger by examining historical travel itineraries. Three different types of models (simple analytical, statistical, and computation intelligence model) are developed to forecast the number of transferring passengers. Numerical experiments using observed Automatic Vehicle Location and Automatic Fare Collection data from South East Queensland, Australia show the accuracy and applicability of the proposed models in timed transfer coordination. Copyright © 2017 John Wiley & Sons, Ltd.     

Built environment impacts on walking for transport in Brisbane,Australia

This study examines the association between urban form and walking for transport in Brisbane, Australia based on both panel and cross-sectional data. Cross-sectional data are used to determine whether urban form was associated with walking for transport in 2011. Panel data are used to evaluate whether changes in the built environment altered walking behaviour between 2009 and 2011. Results from the cross-sectional data suggest that individuals are significantly more likely to be walkers if they live in an area with a well-connected street network and an accessible train station. The longitudinal analysis confirms these relationships; there also was however, a significant impact of travel attitudes and perceptions on walking behaviour. The findings suggest that the built environment continues to be an important factor to encourage walking; however, interventions are also required to change social norms in order to increase the receptiveness for and participation in walking.