Gantry crane operations to transfer containers between trains: A simulation study of a Spanish terminal

Freight transfer operations are critical in combined transport networks. In this paper a simulation model and modelling approach to the transfer of cargo between trains at rail terminals is presented. The model is used to study the Port-Bou terminal, the main intermodal terminal at the Spanish-French frontier. Four different gantry crane operation modes to interchange containers between trains are evaluated. These operation rules are tested in several scenarios to examine the critical factors of the system and the best operation rule for each situation. Latest generation software is used to develop the model that incorporates modular programming and enhanced graphic systems for output representation. It allows a dynamic display of the simulated system and, likewise, the possibility of developing modules that can be reused in other studies. The research shows how simulation can be a useful planning tool in the rail transportation context.     

Cluster analysis of the competitiveness of container ports in Brazil

The container cargo proportion of total maritime transport increased from 3% in 1980 to 16% in 2011. The largest Brazilian port, the port of Santos, is the 42nd largest container port in the world. However, Santos’ performance indicators are much lower than those of the world’s largest ports, so comparisons with them are difficult. This article focuses on the Brazilian container terminals that handled containers in 2009 and compares port competitiveness. This study classified seventeen Brazilian container terminals into three distinct groups based on the following competitiveness criteria: number of containers handled, berth length, number of berths, terminal tariffs (in US$), berth depth, rate of medium consignment (in containers/ship), medium board (containers/hour), average waiting time for mooring (in hours/ship), and average waiting time for load or unload cargo (in hours/ship). This classification used a hierarchical cluster analysis. The classification shows that the terminal of Tecon in the port of Santos has the best performance of all, while small terminals (<150,000 container units) are the worst performing terminals in Brazil.     

Comparing carbon dioxide emissions of trucking and intermodal container transport in Taiwan

This paper examines carbon dioxide emissions of truck-only transportation using activity-based emission modelling and compares those with intermodal coastal shipping and truck movements. The results reveal that replacing long-haul truck transport with the intermodal can significantly reduce carbon dioxide emission significantly because of the efficiency of maritime fuel.     

An analysis of rail freight operational efficiency and mode share in the British port-hinterland container market

The growth in container shipping poses considerable challenges to efforts to reduce the negative externalities associated with freight transport. There are particular concerns about the impacts of the associated port-hinterland freight flows. Through empirical research, this paper examines trends in the operational efficiency of the British port-hinterland container rail freight market and to assess the impacts of any changes on the overall sustainability of this market. Original survey work conducted in 2007 and 2015 has allowed longitudinal and cross-sectional analysis of the characteristics of this market.The survey findings reveal that rail’s mode share of port container throughput (in TEU) has increased from 14.7% in 2007 to 16.6% in 2015 and it is likely that its share of the associated hinterland activity has also risen. Rail was carrying 25% more TEU by 2015 without an increase in train service provision. Increases in mean train capacity and mean load factor were observed, leading to growth in the mean train load from 44 TEU in 2007 to 55 TEU in 2015. This considerable improvement in operational efficiency is expected to have reduced the negative externalities per unit of transport activity associated with the rail-borne hinterland container flows, though scope is identified for further improvements in sustainability.     

A review and analysis of the investment in,and cost structure of,intermodal rail terminals

The results presented in this article identify the role of costs in the scientific and grey freight terminal handling literature and analyses the handling costs of different terminal sizes. The literature review shows that handling costs only play a marginal role in the scientific research in intermodal rail freight terminals (IRT). This is remarkable given the large role costs occupy in decision-making in freight transport. Furthermore, the used cost levels show a wide range of proposed amounts and terminal sizes or handling technologies are seldom addressed. Finally, many of the scientific papers do not make it clear whether the average transhipment cost or market price is referred to. Next, the analysis of the investment in, and cost structure of, IRTs shows that IRT investments are very capital-intensive leading to relatively high average costs per handling. However, given the cost characteristics of IRTs, the average cost per handling represents the underlying cost structure and are – in this sense – representative. The cost analysis demonstrates that extra-large IRTs actually have the lowest average handling costs, followed by small IRTs.     

Mapping and evaluating the complexity of information flows in freight transport chains

ABSTRACT

The role of information in the efficient management of freight transport systems is well acknowledged. Administrative functions, such as negotiation or payments, involve intensive communication, while the production of the transport service relies heavily on the sharing of information (e.g. track and trace). Yet, specific literature on information flows is relatively scarce. This paper sets out to contribute to filling in this gap. Firstly, it elaborates a set of maps of the information flows for four conceptualisations – direct link, corridor, hub and spoke, and connected hubs – of maritime freight transport, initially proposed by Woxenius (2007, “Generic Framework for Transport Network Designs: Applications and Treatment in Intermodal Freight Transport Literature.” Transport Reviews 27 (6): 733–749. doi:10.1080/01441640701358796). The results reveal a high degree of similarity between import and export services. Secondly, it assesses the complexity of each conceptualisation’s flow network using the concept of entropy. Flows are characterised along four variables: involved agents, timing, and contents and message type. Additionally, a new taxonomy is proposed to categorise the messages. The results evidence the heterogeneous contributions of each category to the complexity of the flows. Finally, the results also reveal that the information flows for the tasks in the pre-transport stage are not specific to the conceptualisation in question and are of comparable complexity to the flows occurring during the transport stage.     

Comparative evaluation of resource cycle strategies on operating and environmental impact in container terminals

This paper examines the use of single and dual cycle operations for three types of resources, namely, quay cranes, vehicles, and yard cranes to improve the operating efficiency and reduce the energy consumption in a container terminal. Various cycle strategies are proposed and their corresponding estimation models, describing the stowage distributions of outbound and inbound containers on a ship and the storage sharing level of blocks in the yard, are formulated to estimate the total number of cycles for the resources. Statistical analyses are conducted to evaluate and compare the effect of different cycle strategies on the cycle reductions. From the experiment results, it was found that collaboration between resources with the single cycle operation always outperforms that under the dual cycle operation without collaboration.     

An analysis of institutional pressures,green supply chain management,and green performance in the container shipping context

This paper presents a study which utilized a conceptual framework with institutional theory as its base to empirically evaluate the impact of institutional pressures, internal green practices, and external green collaborations on green performance. Factor analysis was employed to identify the key institutional pressures (i.e. coercive, normative and mimetic pressures), internal green practices (i.e. green shipping practices and green operations), external green collaborations (i.e. green collaboration with supplier, green collaboration with partner, and green collaboration with customer), and green performance (i.e. reduction of pollutants, and perceived green brand) dimensions. We collected data from surveyees employed by 129 container shipping companies and agencies in Taiwan, and applied a structural equation model (SEM) to test the research hypotheses. The findings revealed that institutional pressures have positive effects on internal green practices; internal green practices positively influence external green collaborations; internal green practices and external green collaborations positively influence green performance but institutional pressure is not positively associated with external green collaborations. Theoretical contributions and managerial implications are presented to help container shipping operators improve green performance.     

Energy savings in light rail through the optimization of heating and ventilation

This paper discusses the potential for energy savings in heating and ventilation of light rail vehicles. We present the results of a detailed monitoring campaign on one articulated tram in Ghent, Belgium. The results give insight in the energy use for heating and ventilation in light rail as a function of ambient weather conditions. After several months of monitoring, changes in the HV strategy were implemented and the monitoring was continued. Based on this monitoring data, an energy-use model was constructed for HV both before and after the heating and ventilation strategy changes. These models then served as input for a Monte Carlo simulation, providing average energy savings over 1 year as a result of the optimized heating and ventilation strategy.     

Flexibility in planning and development of a container terminal: an application of an American-style call option

The prosperity and social progress of developed and developing economies is highly dependent on the existence of efficient transport infrastructure. Nevertheless, current budgetary constraints are jeopardizing the necessary investments in new or existing infrastructure. New models for planning and managing infrastructure are now necessary to overcome the lack of public economic resources available. Port infrastructure is no exception and, due to the vast number of uncertainties involving these projects, it is relevant to maximize the capture of the latent value of flexible options. Incorporating flexibility in these projects, prior to the implementation phase, can be a solution that allows port managers to address future uncertainties and mitigate risk exposure. This paper analyzes the incorporation of flexibility in port planning through the use of an American call option to the physical capacity expansion problem. The rationale is to implement a flexible expansion plan, through options that can be exercised at any given time, that are able to deal with uncertainty in demand. The paper uses a case study – Terminal Container of Ferrol, in Spain – and the results support the hypothesis that imbedded flexibility will robustly increase the net present value of the project.     

Emission rates of intermodal rail/road and road-only transportation in Europe: A comprehensive simulation study

Intermodal rail/road transportation combines advantages of both modes of transport and is often seen as an effective approach for reducing the environmental impact of freight transportation. This is because it is often expected that rail transportation emits less greenhouse gases than road transportation. However, the actual emissions of both modes of transport depend on various factors like vehicle type, traction type, fuel emission factors, payload utilization, slope profile or traffic conditions. Still, comprehensive experimental results for estimating emission rates from heavy and voluminous goods in large-scale transportation systems are hardly available so far. This study describes an intermodal rail/road network model that covers the majority of European countries. Using this network model, we estimate emission rates with a mesoscopic model within and between the considered countries by conducting a large-scale simulation of road-only transports and intermodal transports. We show that there are high variations of emission rates for both road-only transportation and intermodal rail/road transportation over the different transport relations in Europe. We found that intermodal routing is more eco-friendly than road-only routing for more than 90% of the simulated shipments. Again, this value varies strongly among country pairs.     

Exploring the issue of integrating logistics and traffic control in urban areas

This paper proposes an optimization framework for urban transportation networks’ (re-)design which explicitly takes into account the specific decision-making processes of ordinary users and logistic operators. Ordinary users are typically commuters whose travels consist of well-defined pairs of origin and destination points, while logistic operators make deliveries at multiple locations. Obviously, these two user classes have different objectives and scopes of action. These differences are seldom considered in traffic research since most models aggregate the flow demand in OD matrices and use assignment models to predict the response of all users as if the dynamics of their optimization processes were of the same nature. This work demonstrates that better results can be achieved if the particular features of each user class are included in the models. It potentially improves the estimation of the responses and allows managers to shape their control measures to address specific user needs.