Alternatives in assigning short‐term counts to seasonal adjustment factor groupings

The precise estimation of the annual average daily traffic (AADT) is a task of significant interest for many transportation authorities and Departments of Transportation. In this study, three methods are developed to improve the assignment of short‐term counts to seasonal adjustment factor (SAF) groupings: the traditional functional classification, a discriminant analysis (DA), and a new statistical approach based on a weighted coefficient of variation (WCV). The data analyzed within this study are generated from all available continuous counters within the State of Ohio between 2002 and 2006. The analysis is conducted using SAFs that are separately calculated for the total volume and the directional specific volumes of a site. The results show that the directionally based assignment errors are statistically lower at a 95% confidence interval when compared with those generated by the total volume analysis. It is also found that the hourly time‐of‐day factors are more important in the assignment process than the average daily traffic. The directionally based WCV produces a decline in the average mean absolute percentage error (MAPE) over the roadway functional classification by 58% and in the standard deviation of the absolute error (SDAE) by 70%. On the contrary, the directionally based DA lowers the MAPE and the SDAE by 35% and 60%, respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

Estimation of AADT from short period counts in hong kong — A comparison between neural network method and regression analysis

The average annual daily traffic (AADT) volumes can be estimated by using a short period count of less than twenty‐four hour duration. In this paper, the neural network method is adopted for the estimation of AADT from short period counts and for the determination of the most appropriate length of counts. A case study is carried out by analysing data at thirteen locations on trunk roads and primary roads in urban area of Hong Kong. The estimation accuracy is also compared with the one obtained by regression analysis approach. The results show that the neural network approach consistently performed better than the regression analysis approach.     

Empirical analysis of short period traffic counts and their efficiency: the case of Indian traffic

Short period traffic counts (SPTCs) are conducted routinely to estimate the annual average daily traffic (AADT) at a particular site. This paper uses Indian traffic volume data to methodically and extensively study the effect of four aspects related to the design of SPTCs. These four aspects are: (i) for how long, (ii) on which days should SPTCs be carried out, (iii) how many times, and (iv) on which months should SPTCs be carried out? The analyses indicate that the best durations for conducting SPTCs are 3 days (starting with a Thursday) and 7 days, for total traffic and truck traffic, respectively. Further, these counts should be repeated twice a year keeping a separation of two months between the counts to obtain good estimates of AADT at minimal cost. An additional outcome of this study has been the determination of seasonal factor values for roads in developing economies, like India.     

Effects of different factors on drivers’ guidance compliance behaviors under road condition information shown on VMS

It is generally accepted that compliance behavior is affected by many factors. The purpose of this study is to investigate the effects of diverse factors on drivers’ guidance compliance behaviors under road condition information shown on graphic variable message sign (VMS), and based on this to find out a better information release mode. The involved data were obtained from questionnaire survey, and ordinal regression was used to analyze the casual relation between guidance compliance behavior and its influencing factors. Based on an overall analysis of conditions in driver’s route choice, an accurate method was proposed to calculate the compliance rate. The model testing information indicated that ordinal regression model with complementary log–log being the link function was appropriate to quantify the relation between the compliance rate and the factors. The estimation results showed that age, driving years, average annual mileage, monthly income, driving style, occupation, the degree of trust in VMS, the familiarity with road network and the route choice style were significant determinants of guidance compliance behavior. This paper also compared two different guidance modes which were ordinary guidance mode (M1) and predicted guidance mode (M2) through simulation. The average speed fluctuations and average travel time supported that M2 had better effect in improving traffic flow and balancing traffic load and resource. Some detailed suggestions of releasing guidance information were proposed with the explanation by flow-density curve and variation of traffic flows. These findings are the foundation to design and improve guidance systems by assessing guidance effect and modifying guidance algorithm.     

Estimating vehicle miles traveled combined with ITS data

‘Vehicle miles traveled’ (VMT) is an important performance measure for highway systems. Currently, VMT [or ‘annual average daily traffic’ (AADT)] is estimated from a combination of permanent counting stations and short-term counts done at specified locations as part of the Highway Performance Monitoring System (HPMS) mandated by the US Federal Highway Administration. However, on some roadway sections, Intelligent Transportation Systems (ITS) such as detectors and cameras also produce traffic data. The question addressed in this paper is whether and under what conditions ITS systems data could be used instead of HPMS short-term counts (called ‘coverage counts’)? This paper develops a methodology for determining a threshold number of missing daily traffic counts, or alternatively, the number of valid ITS data observations needed, in order to confidently replace the HPMS coverage counts with ITS data.

Because ITS counts, coverage counts, and actual ground counts (e.g. continuous counts) cannot be found coexisting on a roadway section, it is hard to compare them directly. In this paper, the Monte Carlo simulation method is employed to generate synthetic ITS counts and coverage counts from a set of relatively complete traffic counts collected at a continuous count station. Comparisons are made between simulated ITS counts, coverage counts, and actual ground counts. The simulation results indicate that when there are<330 daily traffic counts missing in a set of ITS counts in a year, that is, when there are at least 35 days of valid data, ITS counts can be used to derive a better AADT than using coverage counts. This result is applied to calculate the VMT for the Hampton Roads region in Virginia. The comparison between the VMTs derived with using and not using the threshold number indicates that these two VMTs are significantly different.     

Determining the optimal number of seasonal adjustment factor groupings when estimating annual average daily traffic and investigating their characteristics

Although cluster analysis is recommended by the US Traffic Monitoring Guide (TMG) to supplement the development of seasonal adjustment factor groupings (SAFGs), the relationships among SAFGs' characteristics remain undiscovered, while the determination of the optimal number of clusters is an ambiguous task exposed to great subjectivity. Statistical indicators provide a mathematical solution by removing engineering judgment without taking into consideration any guidelines or other criteria, necessary for transportation planners to generate ‘practical and sensible’ groupings. The method examined in this study aims to overcome the above weaknesses incorporating into the methodology a series of statistics, recommendations, and previous research findings. The investigation of the relationships among (1) the within-group variation, (2) the total number of sites, (3) the minimum number of stations within a cluster, (4) the optimal number of clusters, and (5) the geographical size of the groups constitutes the main objectives of this research. According to the results, the cluster variability declines as the available number of stations increases. When the minimum number of stations within a cluster increases, the weighted coefficient of variation inflates as well, with the rate of increase depending on sample size. The average number of automatic traffic recorders per cluster is analogous to the sample size, while the optimal number of clusters varies conversely with the minimum number of stations within a cluster. The application developed for the conduct of the analysis minimizes the computational time needed, while it can be easily implemented by engineers to automate the process recommended by the TMG, enhancing the current state of practice.     

Transport Demand Management in Turkey: A Genetic Algorithm Approach

Abstract

This article proposes new models for estimating transport demand using a genetic algorithm (GA) approach. Based on population, gross national product and number of vehicles, four forms of the genetic algorithm transport planning (GATP) model are developed – one exponential and the others taking quadratic forms – and applied to Turkey. The best fit models in terms of minimum total average relative errors in the test period are selected for future estimation. Demand management strategies are proposed based on three scenarios: restricting private car use, restricting truck use and the simultaneous management of private car use and goods movement. Results show that the GATP model may be used to estimate transport demand in terms of passenger-kilometers traveled (pass-km), vehicle-kilometers traveled (veh-km) and ton-kilometers completed (ton-km). Results also show that the third scenario – simultaneous restrictions on private car use and goods movement – could reduce total veh-km by about 35% by 2025 in this study of Turkish rural roads.     

Modification of the Highway Capacity Manual two‐lane highway analysis procedure for Spanish conditions

The US Highway Capacity Manual (HCM) methodology is used in Spain to evaluate traffic operation and quality of service. The effect of passing manoeuvre on two‐lane highway operational performance is considered through adjustment factors to average travel speeds and percent time spent following. The procedure is largely based on simulations in TWOPAS and passing behaviours observed during US calibrations in the 1970s. It is not clear whether US driving behaviour and vehicles' performance are comparable with Spanish conditions. The objective of this research is to adapt the HCM 2010 methodology to Spanish driver behaviour, for base conditions (i.e. no passing restrictions). To do so, TWOPAS was calibrated and validated based on current Spanish passing field data. The calibration used a genetic algorithm. The case study included an ideal two‐lane highway with varying directional traffic flow rate, directional split and percentage of trucks. The updated methodology for base conditions is simpler than the current HCM 2010 and does not rely on interpolation from tables. Copyright © 2016 John Wiley & Sons, Ltd.     

GIS-based transit trip allocation methods converting stop-level boarding and alighting trips into TAZ trips

ABSTRACT

This study introduces a framework to improve the utilization of new data sources such as automated vehicle location (AVL) and automated passenger counting (APC) systems in transit ridership forecasting models. The direct application of AVL/APC data to travel forecasting requires an important intermediary step that links stops and activities – boarding and alighting – to the actual locations (at the traffic analysis zone (TAZ) level) that generated/attracted these trips. GIS-based transit trip allocation methods are developed with a focus on considering the case when the access shed spans multiple TAZs. The proposed methods improve practical applicability with easily obtained data. The performance of the proposed allocation methods is further evaluated using transit on-board survey data. The results show that the methods can effectively handle various conditions, particularly for major activity generators. The average errors between observed data and the proposed method are about 8% for alighting trips and 18% for boarding trips.     

Modeling probability distribution of delay at signalized intersections

Accurate estimation of vehicle delay is difficult because of the randomness of traffic flow and large number of factors affecting intersection capacity. Existing delay models simplify the real traffic conditions and provide only approximate point estimates of average delay, whereas its variability should also be of interest. A stochastic model was used to study the changing probability distribution of delay. The model is based on sequential calculation of queue length probabilities with any type of arrival process. Delay probability distribution was investigated for different degrees of saturation, arrival types and control conditions. The variance of delay increases rapidly with degree of saturation and is inversely proportional to the approach capacity. Other parameters such as cycle time and saturation flow do not have a significant effect on delay distribution. Both the mean and variance of delay are sensitive to arrival process characteristics and increase with the variance of arrivals.     

Practical approach for travel time estimation from point traffic detector data

Accurate estimation of travel time is critical to the success of advanced traffic management systems and advanced traveler information systems. Travel time estimation also provides basic data support for travel time reliability research, which is being recognized as an important performance measure of the transportation system. This paper investigates a number of methods to address the three major issues associated with travel time estimation from point traffic detector data: data filling for missing or error data, speed transformation from time‐mean speed to space‐mean speed, and travel time estimation that converts the speeds recorded at detector locations to travel time along the highway segment. The case study results show that the spatial and temporal interpolation of missing data and the transformation to space‐mean speed improve the accuracy of the estimates of travel time. The results also indicate that the piecewise constant‐acceleration‐based method developed in this study and the average speed method produce better results than the other three methods proposed in previous studies. Copyright © 2011 John Wiley & Sons, Ltd.     

Safety modeling for two‐way left‐turn lanes and a procedure to identify two‐way left‐turn lane segments with safety concerns

In the past, two‐way left‐turn lane (TWLTL) median treatments have been frequently used in Florida to inexpensively improve traffic and safety performances. In order to identify factors that may have significant impacts on safety operations in TWLTL sections and to identify TWLTL locations that present existing and future safety concerns, a research project was carried out and results are summarized in the paper. In the research, a three‐year crash history database with crashes and section characteristics from a total of 1688 TWLTL sections all over Florida was developed and used. A negative binomial regression model was developed to determine the statistical relationship between the number of crashes per mile per year and several variables such as traffic volume, access density, posted speed, and number of lanes. In regard to the methodology, in order to identify locations with safety concerns, several steps are needed: development of real crash data distribution, determination of statistical distribution models that better represent the actual crash data, determination of percentile values for the average number of crashes, estimation of crash rates for sections with the same characteristics, estimation of critical values for the variables corresponding to the percentile values for average number of crashes, calculation of tables of critical average annual daily traffic values, and generation of a list of TWLTL locations with critical safety concerns. Results presented in the paper have been used in real applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Modelling and simulation of transportation system effectiveness to reduce traffic congestion: a system dynamics framework

ABSTRACT

This paper is designed to evaluate and improve the effectiveness of transportation systems and reduce traffic congestion through the use of simulation models and scenario development. A system dynamics framework is used to test and evaluate the alternatives of future strategies for the city of Surabaya, Indonesia. Some factors affecting the effectiveness of transport systems include operational effectiveness and service effectiveness, as well as uncertainty. To improve the effectiveness of transportation systems, several strategies can be implemented, such as subsidizing public transportation, increasing the cost of private vehicle parking fees, raising taxes on private vehicles, and reducing delays in public transportation through scenario development. Scenario results show that, by pursuing these strategies, effectiveness could be improved by 80% as the impact of the increase in operational and service effectiveness, helping to mitigate traffic congestion. Congestion could be reduced to 70% (on average) due to the decrease in daily traffic.     

Short/medium-term prediction for the aviation emissions in the en route airspace considering the fluctuation in air traffic demand

This paper proposes a novel short/medium-term prediction method for aviation emissions distribution in en route airspace. An en route traffic demand model characterizing both the dynamics and the fluctuation of the actual traffic demand is developed, based on which the variation and the uncertainty of the short/medium-term traffic growth are predicted. Building on the demand forecast the Boeing Fuel Flow Method 2 is applied to estimate the fuel consumption and the resulting aviation emissions in the en route airspace. Based on the traffic demand prediction and the en route emissions estimation, an aviation emissions prediction model is built, which can be used to forecast the generation of en route emissions with uncertainty limits. The developed method is applied to a real data set from Hefei Area Control Center for the en route emission prediction in the next 5 years, with time granularities of both months and years. To validate the uncertainty limits associated with the emission prediction, this paper also presents the prediction results based on future traffic demand derived from the regression model widely adopted by FAA and Eurocontrol. The analysis of the case study shows that the proposed method can characterize well the dynamics and the fluctuation of the en route emissions, thereby providing satisfactory prediction results with appropriate uncertainty limits. The prediction results show a gradual growth at an average annual rate of 7.74%, and the monthly prediction results reveal distinct fluctuation patterns in the growth.     

Traffic state estimation through compressed sensing and Markov random field

This study focuses on information recovery from noisy traffic data and traffic state estimation. The main contributions of this paper are: i) a novel algorithm based on the compressed sensing theory is developed to recover traffic data with Gaussian measurement noise, partial data missing, and corrupted noise; ii) the accuracy of traffic state estimation (TSE) is improved by using Markov random field and total variation (TV) regularization, with introduction of smoothness prior; and iii) a recent TSE method is extended to handle traffic state variables with high dimension. Numerical experiments and field data are used to test performances of these proposed methods; consistent and satisfactory results are obtained.     

Nature and/or nurture? Analyzing the determinants of transit ridership across US urbanized areas

Public subsidy of transit services has increased dramatically in recent years, with little effect on overall ridership. Quite obviously, a clear understanding of the factors influencing transit ridership is central to decisions on investments in and the pricing and deployment of transit services. Yet the literature about the causes of transit use is quite spotty; most previous aggregate analyses of transit ridership have examined just one or a few systems, have not included many of the external, control variables thought to influence transit use, and have not addressed the simultaneous relationship between transit service supply and consumption. This study addresses each of these shortcomings by (1) conducting a cross-sectional analysis of transit use in 265 US urbanized areas, (2) testing dozens of variables measuring regional geography, metropolitan economy, population characteristics, auto/highway system characteristics, and transit system characteristics, and (3) constructing two-stage simultaneous equation regression models to account for simultaneity between transit service supply and consumption. We find that most of the variation in transit ridership among urbanized areas – in both absolute and relative terms – can be explained by factors outside of the control of public transit systems: (1) regional geography (specifically, area of urbanization, population, population density, and regional location in the US), (2) metropolitan economy (specifically, personal/household income), (3) population characteristics (specifically, the percent college students, recent immigrants, and Democratic voters in the population), and (4) auto/highway system characteristics (specifically, the percent carless households and non-transit/non-SOV trips, including commuting via carpools, walking, biking, etc.). While these external factors clearly go a long way toward determining the overall level of transit use in an urbanized area, we find that transit policies do make a significant difference. The observed range in both fares and service frequency in our sample could account for at least a doubling (or halving) of transit use in a given urbanized area. Controlling for the fact that public transit use is strongly correlated with urbanized area size, about 26% of the observed variance in per capita transit patronage across US urbanized areas is explained in the models presented here by service frequency and fare levels. The observed influence of these two factors is consistent with both the literature and intuition: frequent service draws passengers, and high fares drive them away.     

Towards a generic benchmarking platform for origin–destination flows estimation/updating algorithms: Design,demonstration and validation

Estimation/updating of Origin–Destination (OD) flows and other traffic state parameters is a classical, widely adopted procedure in transport engineering, both in off-line and in on-line contexts. Notwithstanding numerous approaches proposed in the literature, there is still room for considerable improvements, also leveraging the unprecedented opportunity offered by information and communication technologies and big data. A key issue relates to the unobservability of OD flows in real networks – except from closed highway systems – thus leading to inherent difficulties in measuring performance of OD flows estimation/updating methods and algorithms. Starting from these premises, the paper proposes a common evaluation and benchmarking framework, providing a synthetic test bed, which enables implementation and comparison of OD estimation/updating algorithms and methodologies under “standardized” conditions. The framework, implemented in a platform available to interested parties upon request, has been flexibly designed and allows comparing a variety of approaches under various settings and conditions. Specifically, the structure and the key features of the framework are presented, along with a detailed experimental design for the application of different dynamic OD flow estimation algorithms. By way of example, applications to both off-line/planning and on-line algorithms are presented, together with a demonstration of the extensibility of the presented framework to accommodate additional data sources.     

An empirical analysis of freight transport traffic modes in Brazil, 1996–2012

This paper analyses the performance of freight transportation modes in Brazil – namely air, water, rail and road – from February 1996 to August 2012 by investigating their long memory properties using fractional integration and autoregressive models on monthly tonnage data. Two important features are analysed: the degree of dependence of transportation traffic across time and its seasonal structure over the period. Furthermore, the stability of parameters across the sample period is investigated, incorporating potential structural breaks in the data, which describe discontinuity in freight transportation traffic. Some policy implications are derived.     

Women,travel and the idea of 'sustainable transport'

Women form an increasingly large proportion of both the populations of the US and of European countries. This, together with the changing role of women in modern society, has important potential implications for transport policy. Looked at from the micro level, women have different travel patterns from men, reflecting factors such as lower labour force participation, lower income levels, their traditional role in the family, the decision-making structure within households, the current age distribution and physical vulnerability. The situation is changing and this will have implications on transport demands. The female population is also, on average, getting older. Traditional travel modelling spends much time on modal attributes, such as speed and cost, but for many women this may not be the central issue. Security is often important. Standard traffic models only implicitly allow for gender (e.g. travel time is valued different from work and non-work trips). With the increased complexity of life styles and the growth in multi-purpose trips by women, the conventional approach to travel time valuation may need to be rethought. This paper looks at some of the emerging issues regarding women and travel and puts them in the context of the emerging ideas concerning sustainable transport.     

A web-based support system for estimating and visualizing the emissions of diesel transit buses

Diesel transit buses are heavy-duty vehicles that are major sources of greenhouse gases and toxic pollutants. Although various models have been used to estimate their emissions, it has been difficult to effectively apply these estimation models due to the need for user-friendly interfaces, the large amounts of underlying data, and the potential data inaccuracy. In this paper, we present a web-based support system developed for transit operators who need to estimate and visualize the emissions of diesel transit buses where a micro-scale Vehicle Specific Power approach is used to estimate emissions based on global positioning system data. Case studies show that the web-based support system provides a user-friendly environment that makes it easier to apply emission estimation methodologies and visualize emissions.