Route structures in air transportation—the situation in the federal republic of Germany

This paper deals with route structures in air transportation in general and describes the derivation of such structures. Based on an extensive analysis of scheduled air traffic in Germany, an overview of the situation in domestic and international air travel is given. In particular, relationships were found which permit—in connection with a number of influencing factors—to derive from the present situation route structures, which are also valid for a future year.

This approach was used for the assignment of origin‐destination‐passenger flows to air network routes in a forecast of demand and services in commercial air transportation of the Federal Republic of Germany for the year 1995.     

A State-of-the-Art Review of Car-Following Models with Particular Considerations of Heavy Vehicles

Abstract

Car-following (CF) models are fundamental in the replication of traffic flow and thus they have received considerable attention. This attention needs to be reflected upon at particular points in time. CF models are in a continuous state of improvement due to their significant role in traffic micro-simulations, intelligent transportation systems and safety engineering models. This paper presents a review of existing CF models. It classifies them into classic and artificial intelligence models. It discusses the capability of the models and potential limitations that need to be considered in their improvement. This paper also reviews the studies investigating the impacts of heavy vehicles in traffic stream and on CF behaviour. The findings of the study provide promising directions for future research and suggest revisiting the existing models to accommodate different behaviours of drivers in heterogeneous traffic, in particular, heavy vehicles in traffic.     

Some features of non-linear travel time models for dynamic traffic assignment

Abstract

This paper investigates some features of non-linear travel time models for dynamic traffic assignment (DTA) that adopt traffic on the link as the sole determinant for the calculation of travel time and have explicit relationships between travel time and traffic on the link. Analytical proofs and numerical examples are provided to show first-in-first-out (FIFO) violation and the behaviour of decreasing outflow with increasing traffic in non-linear travel time models. It is analytically shown that any non-linear travel time model could violate FIFO in some circumstances, especially when inflow drops sharply, and some convex non-linear travel time models could show behaviour with outflow decreasing as traffic increases. It is also shown that the linear travel time model does not show these behaviours. A non-linear travel time model in general form was used for analytical proofs and several existing non-linear travel time models were adopted for numerical examples. Considering the features addressed in this study, non-linear travel time models seem to have limitations for use in DTA in practical terms and care should be taken when they are used for modelling time-varying transportation networks.     

Visco‐elastic traffic flow model

To increase our understanding of the operations of traffic system, a visco‐elastic traffic model was proposed in analogy of non‐Newtonian fluid mechanics. The traffic model is based on mass and momentum conservations, and includes a constitutive relation similar to that of linear visco‐elastic fluids. The further inclusion of the elastic effect allows us to describe a high‐order traffic model more comprehensively because the use of relaxation time indicates that vehicle drivers adjust their time headway in a reasonable and safe range. The self‐organizing behaviour is described by introducing the effects of pressure and visco‐elasticity from the point of view in fluid mechanics. Both the viscosity and elasticity can be determined by using the relaxation time and the traffic sound speed. The sound speed can be approximately represented by the road operational parameters including the free‐flow speed, the jam density, and the density of saturation if the jam pressure in traffic flows is identical to the total pressure at the flow saturation point. A linear stability analysis showed that the traffic flow should be absolutely unstable for disturbances with short spatial wavelengths. There are two critical points of regime transition in traffic flows. The first point happens at the density of saturation, and the second point occurs at a density relating on the sound speed and the fundamental diagram of traffic flows. By using a triangular form flow–density relation, a numerical test based on the new model is carried out for congested traffic flows on a loop road without ramp effect. The numerical results are discussed and compared with the result of theoretical analysis and observation data of traffic flows. Copyright © 2011 John Wiley & Sons, Ltd.     

Combining driver response with cyclical queue optimisation over selected corridors

A case study located in Auckland, New Zealand, was used to quantify the magnitude of savings that may result if the SCATS adaptive traffic control system contains an explicitly combined queue estimation and offset adjustment on a cycle‐by‐cycle basis. A validated SATURN traffic model was used to evaluate five scenarios that represent the short‐run and long‐run efficiency gains resulting from progressive signal adaption with an objective of queue minimisation on the main corridors. Optimisation was applied both area‐wide, and on selected arterial corridors, using a combined split/offset optimisation routine with responsive driver behaviour to achieve a network‐wide and corridor‐specific efficiency gain. The modelling heuristic evaluates the efficiency of both the Equisat and P₀ optimisation policies that would mimic a more progressive adaption of signals under SCATS. Results for the long‐run area‐wide optimisation can produce network‐wide travel‐time savings in the order of 20% and a reduction in transient queues of 28% if only selected corridors are optimised, with a 5% reduction in journey time over an average 8‐min journey. Copyright © 2016 John Wiley & Sons, Ltd.     

Evaluation of the Transferability of Incident Detection Algorithms Developed for Singapore Expressways

ABSTRACT

Two new detection algorithms, single-station DV (dual-variable) and dual-station CODE (COmbined Detector Evaluation) were developed earlier using 160 incidents collected along Singapore's Central Expressway (CTE). The transferability of these CTE-developed algorithms is assessed, as a case study, using 100 incidents collected from the Tullamarine Freeway and South Eastern Freeway in Melbourne, Australia. The investigation covers the differences in traffic detector systems (loop detectors versus video-based), road geometry and behaviour between drivers in Singapore and Australia. The re-calibrated application of these algorithms to freeways in Melbourne yielded a reasonably good detection performance as well as satisfying the average expected performances of seven traffic management centres surveyed in the USA. The results suggested that the detection logic of the algorithms developed for CTE possessed reasonably good transferability and are also suitable for receiving traffic inputs from video-based detectors as well as from loop detectors.     

Using social theory and GIS to create a safer road environment: a new attitude

Abstract

This paper presents the hypothesis that in order to create a safer road environment, there needs to be a change in the approach used by police services. A shift in methodology is required that moves away from punishment, such as issuing traffic tickets, and its attendant measures of success, total number of tickets issued or total amount of fines, to a safety-based methodology with its main emphasis on reducing collisions and their severity. This requires understanding the social context of driving and how dangerous driving is defined. This paper moves from these topics to describing deterrence theory which is the common philosophy underlying the criminal justice system today, including how the police handle traffic violations. A different approach is then presented which draws from these methods but changes the focus of police resource deployment.     

Computing 4D near-optimal trajectories for dynamic air traffic flow management with column generation and branch-and-price

Abstract

The current air traffic system faces recurrent saturation problems. Numerous studies are dedicated to this issue, including the present research on a new dynamic regulation filter holding frequent trajectory optimisations in a real-time sliding horizon loop process. We consider a trajectory optimisation problem arising in this context, where a feasible four-dimensional (4D) trajectory is to be built and assigned to each regulated flight to suppress sector overloads while minimising the cost of the chosen policy. We model this problem with a mixed integer linear programme and solve it with a branch-and-price approach. The pricing sub-problem looks for feasible trajectories in a dynamic three-dimensional (3D) network and is solved with a specific algorithm based on shortest path labelling algorithms and on dynamic programming. Each algorithm is tested on real-world data corresponding to a complete traffic day in the European air traffic system; experimental results, including computing times measurement, validate the solution process.     

Feedback control strategy of a new car-following model based on reducing traffic accident rates

ABSTRACT

To reduce the traffic accident death rate effectively and alleviate the traffic congestion phenomenon, this study proposes a new type of car-following model under the influence of drivers’ time-varying delay response time. Based on Lyapunov function theory, this paper reduces the traffic accident rate problem to the stability issues of the new model. By constructing suitable Lyapunov functions and using the linear matrix inequality method, the stability problem of the new car-following model is studied. The model, under the action of the controller, can effectively restrain traffic congestion. Using the traffic accident rate model proposed by Solomon, compared with the car-following model without the controller, the model under the controller shows a stronger convergence. This also means that the traffic congestion phenomenon has been effectively suppressed while greatly reducing the mortality rate of traffic accidents.     

ATCEM: a synthetic model for evaluating air traffic complexity

Air traffic complexity, which measures the disorder of air traffic distribution, has become the critical indicator to reflect air traffic controller workload in air traffic management (ATM) system. However, it is hard to assess the system accurately because there are too many correlated factors, which make the air traffic complexity nonlinear. This paper presents an air traffic complexity evaluation model with integrated classification using computational intelligence (ATCEM). To avoid redundant factors, critical factors contributing to complexity are analyzed and selected from numerous factors in the ATCEM. Subsequently, to construct the mapping relationship between selected factors and air traffic complexity, an integrated classifier is built in ATCEM. With efficient training and learning based on aviation domain knowledge, the integrated classifier can effectively and stably reflect the mapping relationship between selected factors and the category of air traffic complexity to ensure the precision of the evaluation. Empirical studies using real data of the southwest airspace of China show that the ATCEM outperforms a number of state‐of‐the‐art models. Moreover, using the critical complexity factors selected in ATCEM, the air traffic complexity could be effectively estimated. Copyright © 2015 John Wiley & Sons, Ltd.     

Rapid transit system simulation with interactive graphics display

A mathematical model of a rapid transit system has been developed. The model employs computer techniques to simulate the physical system. To further enhance the results and gain management confidence in the reliability and validity of the design of the model, a TV‐like display of the computer results enables the viewer to “see” the performance of the model as it happens. The results displayed thus include: The track layout, time (simulation), train position on the track, and the number of passengers riding on each train and waiting at each platform or station. The computer printout of results is limited to summary type data, relying on the display for detailed evaluation and analysis.     

A model for the visualization and analysis of elevator traffic

ABSTRACT

Analysis of elevator traffic in high rise buildings is critical to the performance evaluation of elevator group control systems (EGCS). Elevator dispatching methods or parking algorithms in an EGCS can be designed or modified according to analyses of traffic flow. However, interpretation of traffic flow based solely on numerical data may not be explicit and transparent for EGCS experts as well as for other non-expert building administration. In this study, we present a model for visualization and analysis of elevator traffic. First, we present an alternative approach for traffic analysis which we call route visualization. In the proposed approach, we initially decompose elevator traffic into its component parts and investigate each component independently. Then, using superposition of components we obtain a reconstructed model of overall traffic. This modeling approach provides component-based traffic analysis and representation of routes with intensities through data visualization. In the second part we introduce a multi-dimensional analysis of time parameters in ECGS. This approach provides a comparative analysis of several control algorithms such as dispatch or park algorithms for different combinations of traffic components.     

Including heavy vehicles in a car‐following model: modelling,calibrating and validating

Heavy vehicles influence general traffic in many different ways compared with passenger vehicles, and this may result in different levels of traffic instability. Increases in the number and proportion of heavy vehicles in the traffic stream will therefore result in different traffic flow conditions. This research initially outlines the different car‐following behaviour of drivers in congested heterogeneous traffic conditions indicating the necessity for developing a car‐following model, which includes these differences. A psychophysical car‐following model, similar in form to Weideman's car‐following model, was developed. Due to the complexity of the developed model, the calibration of the model was undertaken using a particle swarm optimisation algorithm with the data recorded under congested traffic conditions. This was then incorporated into a traffic microsimulation model. The results showed that the car‐following perceptual thresholds and thus action points of drivers differ based on their vehicle and the lead vehicle types. The inclusion of the heavy vehicles in the model showed significant impacts on the traffic dynamic and interactions amongst different vehicles. Copyright © 2016 John Wiley & Sons, Ltd.     

Traffic accident risk perception among drivers: a latent variable approach

ABSTRACT

Governments require decision tools to deal with road traffic accidents, a pandemic resulting in millions of deaths around the world. Evidence shows that human factors are one of the major causes of road accidents, and there is much interest in identifying variables that may have an impact on drivers’ perception of risk. To this aim, we design a stated choice experiment with eight hypothetical driving scenarios considering attributes that have been strongly associated with increased accident risks: (i) driving speed, (ii) driving the wrong way in a one-way street, (iii) overtaking on a bend, and (iv) driving under the influence of alcohol or drugs. Data from a sample of survey respondents are used to estimate a hybrid discrete choice model incorporating two latent variables, Driver Concentration and Safe Driving. Our results may contribute to the design of public policies geared to prevent accidents by encouraging safer driving behaviour.     

A computationally efficient two-stage method for short-term traffic prediction on urban roads

Abstract

Short-term traffic prediction plays an important role in intelligent transport systems. This paper presents a novel two-stage prediction structure using the technique of Singular Spectrum Analysis (SSA) as a data smoothing stage to improve the prediction accuracy. Moreover, a novel prediction method named Grey System Model (GM) is introduced to reduce the dependency on method training and parameter optimisation. To demonstrate the effects of these improvements, this paper compares the prediction accuracies of SSA and non-SSA model structures using both a GM and a more conventional Seasonal Auto-Regressive Integrated Moving Average (SARIMA) prediction model. These methods were calibrated and evaluated using traffic flow data from a corridor in Central London under both normal and incident traffic conditions. The prediction accuracy comparisons show that the SSA method as a data smoothing step before the application of machine learning or statistical prediction methods can improve the final traffic prediction accuracy. In addition, the results indicate that the relatively novel GM method outperforms SARIMA under both normal and incident traffic conditions on urban roads.     

Modelling heavy vehicle car‐following behaviour in congested traffic conditions

This study develops a car‐following model in which heavy vehicle behaviour is predicted separately from passenger car. Heavy vehicles have different characteristics and manoeuvrability compared with passenger cars. These differences could create problems in freeway operations and safety under congested traffic conditions (level of service E and F) particularly when there is high proportion of heavy vehicles. With increasing numbers of heavy vehicles in the traffic stream, model estimates of the traffic flow could be degrades because existing car‐following models do not differentiate between these vehicles and passenger cars. This study highlighted some of the differences in car‐following behaviour of heavy vehicle and passenger drivers and developed a model considering heavy vehicles. In this model, the local linear model tree approach was used to incorporate human perceptual imperfections into a car‐following model. Three different real world data sets from a stretch of freeway in USA were used in this study. Two of them were used for the training and testing of the model, and one of them was used for evaluation purpose. The performance of the model was compared with a number of existing car‐following models. The results showed that the model, which considers the heavy vehicle type, could predict car‐following behaviour of drivers better than the existing models. Copyright © 2013 John Wiley & Sons, Ltd.     

Evacuation Modelling in the United States: Does the Demand Model Choice Matter?

Abstract

This paper reviews the literature on the evacuation demand problem, with an emphasis on the impact of various modelling approaches on network‐wide evacuation performance measures. First, a number of important factors that affect evacuee behaviour are summarized. Evacuation software packages and tools are also investigated in terms of the demand generation model they use. The most widely used models are then selected for performing sensitivity analysis. Next, a cell‐transmission‐based system optimal dynamic traffic assignment (SO‐DTA) model is employed to assess the effects of the demand model choice on the clearance time and average travel time. It is concluded that evacuation demand models should be selected with care, and policy makers should make sure the selected demand curve can replicate real‐life conditions with relatively high fidelity for the study region to be able to develop reliable and realistic evacuation plans.     

A systematic review of route optimisation and pre-emption methods for emergency vehicles

ABSTRACT

Reducing the travel time of emergency vehicles (EVs) is an effective way to improve critical services such as ambulance, fire, and police. Route optimisation and pre-emption are powerful techniques used to reduce EV travel time. This paper presents a systematic literature review of optimisation and pre-emption techniques for routing EVs. A detailed classification of existing techniques is presented along with critical analysis and discussion. The study observes the limitations of existing routing systems and lack of real-world applications of the proposed pre-emption systems, leading to several interesting and important knowledge and implementation gaps that require further investigation. These gaps include optimisations using real-time dynamic traffic data, considering time to travel as a critical parameter within dynamic route planning algorithms, considering advanced algorithms, assessing and minimising the effects of EV routing on other traffic, and addressing safety concerns in traffic networks containing multiple EVs at the same time.     

The use of demand correlation in the modeling of air carrier departure delays as first‐order autoregressive random processes

A method for modeling air carrier departure delays at commercial‐service airports as autoregressive random processes is presented. This method employs the correlation of a priori demand data to significantly reduce prediction error in the optimal least‐squares estimator for additive white noise. The reduction factor of the prediction error is demonstrated to be on the order of 10² over that of the unbiased estimator. Copyright © 2011 John Wiley & Sons, Ltd.