The potential mitigation of CO2 emissions via modal substitution of high-speed rail for short-haul air travel from a life cycle perspective – An Australian case study

The objective of this study is to provide a strategic evaluation of the mitigation of CO₂ emissions via modal substitution of high-speed rail for short-haul air travel on the Sydney–Melbourne, Australia city-pair from a life cycle perspective. It has been demonstrated that when considering CO₂ emissions from vehicle operations, the modal shift from air to high-speed rail on this city-pair has the potential to provide a means of CO₂ mitigation. However, uncertainty exists with regard to the level of mitigation potential when considering the whole-of-life performance of the systems. Given the significant difference in the infrastructure requirements between the air mode and the high-speed rail mode, this study quantifies the life cycle CO₂ load attributable to each system and examines the effect on CO₂ mitigation potential. The study concluded that while the inclusion of the linehaul infrastructure did increase the CO₂ load associated with high-speed rail mode, it did not equate to or exceed the CO₂ load per trip as experienced by the air mode. The avoided annual life cycle CO₂ emission in the target year 2056 was 0.37 Mt representing an 18% reduction when compared to the air mode only on the city pair. In fact, the scenario comparison indicated that the substitution of high-speed rail for short-haul air travel on the city pair resulted in CO₂ emissions avoidance throughout the longitudinal period.     

An optimization model of energy and transportation systems: Assessing the high-speed rail impacts in the United States

This paper presents a long-term investment planning model that co-optimizes infrastructure investments and operations across transportation and electric infrastructure systems for meeting the energy and transportation needs in the United States. The developed passenger transportation model is integrated within the modeling framework of a National Long-term Energy and Transportation Planning (NETPLAN) software, and the model is applied to investigate the impact of high-speed rail (HSR) investments on interstate passenger transportation portfolio, fuel and electricity consumption, and 40-year cost and carbon dioxide (CO₂) emissions. The results show that there are feasible scenarios under which significant HSR penetration can be achieved, leading to reasonable decrease in national long-term CO₂ emissions and costs. At higher HSR penetration of approximately 30% relative to no HSR in the portfolio promises a 40-year cost savings of up to $0.63 T, gasoline and jet fuel consumption reduction of up to 34% for interstate passenger trips, CO₂ emissions reduction by about 0.8 billion short tons, and increased resilience against petroleum price shocks. Additionally, sensitivity studies with respect to light-duty vehicle mode share reveal that in order to realize such long-term cost and emission benefits, a change in the passenger mode choice is essential to ensure higher ridership for HSR.     

Economic valuation of Well-To-Wheel CO2 emissions from freight transport along the main transalpine corridors

CO₂ emissions are one of the main externalities related to freight transport. Their evaluation is extremely difficult, due to the presence of several scientific and economic uncertainties. This paper discusses the approaches currently adopted by literature to deal with CO₂, proposing a methodology based on a Well-To-Wheel quantification and an economic valuation deriving from a meta-regression. A freight transport analysis is then provided for one of the most critical areas of Europe, the Alps. Here, the different approaches adopted by the single nations determine divergent results in terms of modal shift towards rail and, consequently, CO₂ emissions. An integrated and transnational strategy could lead to better results, avoiding detoured traffic and increasing the share of railway traffic. To this aim, the carbon impacts of three specific alpine-wide measures are evaluated: namely, Alpine Crossing Exchange, Emissions Trading and Differentiated Toll System. In comparison with business-as-usual scenario, the case study reveals a potential CO₂ saving up to more than 600,000 tons and 38 M€ for the year 2030, thus providing policy makers with an integrative transnational tool able to evaluate the long-term carbon impact of their transport decisions.     

Exploring transport carbon futures using population microsimulation and travel diaries: Beijing to 2030

Evaluating transport policy for cities in developing countries is often constrained by data availability that limits the use of conventional appraisal models. Here, we present a new ‘bottom-up’ methodology to estimate transport CO₂ emission from daily urban passenger travel for Beijing, a megacity with relatively sparse data on travel behaviour. A spatial microsimulation, based on an activity diary survey and two sample population censuses, is used to simulate, for Beijing’s urban districts, a realistic synthetic population, and their daily travel and CO₂ emission over 2000–2010. This approach provides greater insight into the spatial variability of transport CO₂ emission than has previously been possible for Beijing, and further, enables an examination of the role of socio-demographics, urban form and transport developments in contributing to emissions over the modelled period.Using the 2000–2010 CO₂ emission estimates as a baseline, CO₂ emissions from passenger travel are then modelled to 2030 under scenarios exploring politically plausible strategies on transport (public transport infrastructure investment, and vehicle constraint), urban development (compaction) and vehicle technology (faster adoption of clean vehicle technology). The results showed that, compared to the trend scenario, employing both transport and urban development policies could reduce total passenger CO₂ emission to 2030 by 24%, and by 43% if all strategies were applied together. The study reveals the potential of microsimulation in emission estimation for large cities in developing countries where data availability may constrain more traditional approaches.     

Policy packages for modal shift and CO2 reduction in Lille,France

This paper proposes different policy scenarios to cut CO₂ emissions caused by the urban mobility of passengers. More precisely, we compare the effects of the ‘direct tool’ of carbon tax, to a combination of ‘indirect tools’ – not originally aimed at reducing CO₂ (i.e. congestion charging, parking charges and a reduction in public transport travel time) in terms of CO₂ impacts through a change in the modal split. In our model, modal choices depend on individual characteristics, trip features (including the effects of policy tools), and land use at origin and destination zones. Personal “CO₂ emissions budgets” resulting from the trips observed in the metropolitan area of Lille (France) in 2006 are calculated and compared to the situation related to the different policy scenarios. We find that an increase of 50% in parking charges combined with a cordon toll of €1.20 and a 10% travel time decrease in public transport services (made after recycling toll-revenues) is the winning scenario. The combined effects of all the policy scenarios are superior to their separate effects.     

Carbon,water, land and material footprints of China’s high-speed railway construction

The rapid development of China’s high-speed rail (HSR) has caused great concern worldwide, and its various environmental impacts is also a main topic. As such, a comprehensive assessment of these environmental impacts is significant for future HSR construction. In this study, a hybrid input-output life cycle method is applied to evaluate multi-footprints of Beijing-Tianjin intercity HSR, namely, carbon, water, land, and material footprints. Results show that the total carbon, water, land, and material footprints of the entire Beijing-Tianjin HSR construction are 3669.0 kt CO₂, 54954.7 kt fresh water, 45830.6 ha land, and 8474.2 kt original materials. In the construction stage, bridge and rail systems have the largest environmental impacts, totally contributing above 74% of the four footprints. The indirect footprints from upstream material production have the dominant effects, accounting over 89% in the four footprints. Metal smelting and rolling, transportation equipment manufacturing, and non-metallic mineral products are high-water-consuming and high-emission sectors in raw material production. Improving industrial production efficiency, optimizing line layout, optimizing production distribution and construction process management are key mitigation ways for multi-footprints.     

Estimating transboundary economic damages from climate change and air pollution for subnational incentives for green on-road freight

Subnational incentives to adopt zero emission vehicles (ZEVs) are critical for reducing the external economic damages posed by transportation to air quality and the climate. Few studies estimate these damages for on-road freight, especially at scales relevant for subnational policies requiring cross-border cooperation. Here, we assess the damages to US receptors from emissions of air pollutants (PM_2.5, NO_x, SO₂, NH₃), and greenhouse gases (CO₂, CH₄, N₂O) from medium and heavy duty freight trucking, and the benefits of ZEV adoption by census division in the Province of Ontario. We develop an integrated modelling framework connecting a travel demand model, a mobile emissions simulator, and a regression based marginal damages model of air pollutants and climate change. We estimate $1.9 billion (2010 USD) in annual cross-border damages, or $0.16/VKT, resulting from scaled up atmospheric emissions from a ‘typical day’ of medium and heavy duty truck traffic volume for Ontario in 2012. This implies approximately $8000 per truck per year in damages, which could inform an economic incentive for emission reduction. The provincial goal of 5% ZEV adoption would reduce GHG emissions in 2012 by 800 ktCO₂e, yielding $89 Million (2010 USD) in cross-border benefits annually, with air quality co-benefits of $83/tCO₂e. This result varies between −19% and 22% based on sensitivity analysis for travel and emissions models, though economic damages are likely the largest uncertainty source. Such advances in subnational scale integrated modeling of the environmental impacts of freight can offer insights into the sustainable design of clean freight policy and programs.     

Low-carbon futures for Shenzhen’s urban passenger transport: A human-based approach

Shenzhen, one of China’s leading cities, has the potential to be a model for achieving China’s ambitious CO₂ emission reduction targets. Using data from a travel diary survey in Shenzhen in 2014, we develop a human-based agent model to conduct a scenario study of future urban passenger transport energy consumption and CO₂ emissions from 2014 to 2050. Responses to different policy interventions at the individual level are taken into account. We find that with current policies, the carbon emissions of the urban passenger transport sector in Shenzhen will continuously increase without a peak before 2050. Strengthening 21 transport policies will help Shenzhen to peak the carbon emissions by 2030 for passenger transport. Among these policies, the car quota policy and the fuel economy standard are essential for achieving a carbon peak by 2030. In addition, a package of seven policies, including fewer car quotas, a stricter fuel economy standard, raising parking fees, limiting parking supply, increasing EV charging facilities and subway lines, and improving public transport services, is sufficient to peak carbon emissions by 2030, although at an emissions level higher than for the 21 policies.     

The impact of coordinated policies on air pollution emissions from road transportation in China

Improving air quality across mainland China is an urgent policy challenge. While much of the problem is linked to China’s broader reliance on coal and other fossil fuels across the energy system, road transportation is an important and growing source of air pollution. Here we use an energy-economic model, embedded in a Regional Emissions Air Quality Climate and Health (REACH) integrated assessment framework, to analyze the impacts of implementing vehicle emissions standards (ES) together with a broader economy-wide climate policy on total air pollution in five species and 30 Chinese provinces. We find that full and immediate implementation of existing vehicle ES at China 3/III level or tighter will significantly reduce the contribution of transportation to degraded air quality by 2030. We further show that road transport ES function as an important complement to an economy-wide price on CO₂, which delivers significant co-benefits for air pollution reduction that are concentrated primarily in non-transportation sectors. Going forward, vehicle emissions standards and an economy-wide carbon price form a highly effective coordinated policy package that supports China’s air quality and climate change mitigation goals.     

A system dynamics model of CO2 mitigation in China’s inter-city passenger transport

Mitigation of greenhouse gas emissions from transportation has become increasingly important and challenging especially for developing countries. This paper takes the inter-city passenger transport in China as a case, and develops a system dynamics model for policy assessment and CO₂ mitigation potential analysis. It is found that the future demand for China’s inter-city passenger transport is expected to be large, with the turnover volume growing at a rate of 9% per annum and amounting to 6600 billion p-km in 2020. Major emissions reduction potential exists in inter-city passenger transport. In 2020, comparing to the case without any specific policies stressing mitigation, the reduction of CO₂ emissions ranges from 26% to 32% under those scenarios with policy controls. Sensitivity analysis reveals that the CO₂ mitigation will be best achieved by accelerating the development of railway network, together with slowing down the extension of highway network and imposing fuel taxes.     

Impacts of an emission based private car taxation policy - First year ex-post analysis

This paper assesses the impacts of a targeted policy designed to influence car purchasing trends towards lower CO₂ emitting vehicles. Vehicle registration tax and annual motor tax rates in Ireland changed in July 2008 from being based on engine size to emissions performance of cars. This paper provides a one year ex-post analysis of the first year of the tax change, tracking the change in purchasing trends arising from the measure related to specific CO₂ emissions, engine size and fuel, and the implications for car prices, CO₂ emissions abatement, and revenue gathered. While engine efficiency improvements had been offset by purchasing trends towards larger and generally less efficient cars in the past, with the average MJ/km remaining constant from 2000 to 2007, this analysis shows that in the first year of the new taxation system the average specific emissions of new cars fell by 13% to 145 g/km. This was brought about, not by a reduction in engine size, but rather through a significant shift to diesel cars. Despite an unexpected reduction in car sales due to a recession in 2008, the policy measure has had a larger than anticipated impact on CO₂ emissions, calculated to be 5.9 ktCO₂ in the first year of the measure. The strong price signal did however result in a 33% reduction in tax revenue from VRT, in financial terms amounting to a drop of €166 million compared to a baseline situation.     

A point card system for public transport utilization in Korea

This study analyzes consumer preferences for a new incentive program based on a point card to promote green consumption; the study also examines the program’s impact on bus utilization in South Korea. An ex-ante analysis was conducted to examine how consumer behavior can be modified based on varying incentive levels of the point card system. In addition, the effect of the system on consumers’ public transport utilization and resulting CO₂ emissions reductions are analyzed. The adoption probability of the point card is forecast at about 93%, and annual CO₂ emissions are forecast to decrease by 610 kt CO₂.     

Will technological progress be sufficient to stabilize CO2 emissions from air transport in the mid-term?

This article investigates whether anticipated technological progress can be expected to offset the CO₂ emissions resulting from rapid air traffic growth. Global aviation CO₂ emissions projections are examined for eight geographical zones until 2025. Air traffic flows are forecast using a dynamic panel-data econometric model, and then converted into corresponding quantities of air traffic CO₂ emissions using specific hypotheses and energy factors. None of our nine scenarios appears compatible with the objective of 450 ppm CO₂-eq. recommended by the Intergovernmental Panel on Climate Change. Nor is any compatible with the Panel’s aim of limiting global warming to 3.2 °C.     

Impact of public transport and non-motorized transport infrastructure on travel mode shares,energy, emissions and safety: Case of Indian cities

Current modal share in Indian cities is in favor of non-motorized transport (NMT) and public transport (PT), however historical trends shows decline in its use. Existing NMT and PT infrastructure in Indian cities is of poor quality resulting in increasing risk from road traffic crashes to these users. It is therefore likely that the current NMT and PT users will shift to personal motorized vehicles (PMV) as and when they can afford it. Share of NMT and PT users can be retained and possibly increased if safe and convenient facilities for them are created. This shall also have impact on reducing environment impacts of transport system.We have studied travel behavior of three medium size cities – Udaipur, Rajkot and Vishakhapatnam. Later the impact of improving built environment and infrastructure on travel mode shares, fuel consumption, emission levels and traffic safety in Rajkot and Vishakhapatnam are analyzed. For the purpose three scenarios are developed – improving only NMT infrastructure, improving only bus infrastructure and improving both NMT and bus infrastructure.The study shows the strong role of NMT infrastructure in both cities despite geographical dissimilarities. The scenario analysis shows maximum reduction in CO₂ emissions is achieved when both PT and NMT infrastructure are improved. Improvement in safety indicator is highest in this scenario. Improving only PT infrastructure may have marginal effect on overall reduction of CO₂ emissions and adverse effects on traffic safety. NMT infrastructure is crucial for maintaining the travel mode shares in favor of PT and NMT in future.     

Co-benefits of low carbon passenger transport actions in Indian cities: Case study of Ahmedabad

Rising population, income and urbanization are increasing urban passenger transport demand in India. Energy and emissions intensities associated with conventional transport are no longer sustainable vis-a-vis energy security, air quality and climate change. Cities are seeking transport roadmaps that jointly mitigate these risks. Roadmaps vary across cities, but approach to delineate actions is common: (i) ‘representative vision’ that articulates long-term goals, (ii) methods for comparative scenarios assessment, and (iii) quantification of co-benefits to prioritize actions. This paper illustrates application of quantitative modeling to assess development and environmental co-benefits for Ahmedabad city. The paper constructs two transport scenarios spanning till 2035. The bifurcating themes are: (i) Business-as-Usual (BAU) and Low Carbon Scenario (LCS). The quantitative assessment using Extended Snapshot (ExSS) Model shows that transport activity shall result in four-fold increase in energy demand under BAU from 2010 to 2035. Three key contributors to CO₂ mitigation under LCS in merit order are: (i) fuel switch, including decarbonized electricity, (ii) modal shift, and (iii) substitution of travel demand. Scenarios analysis shows that LCS improves energy security by reducing oil demand and also delivers air quality co-benefits – reducing 74% NOx and 83% PM_2.5 from the passenger transport sector compared to BAU in 2035. Finally, the paper argues that cities in developing countries can leverage carbon finance to develop sustainable and low carbon mobility plans that prevent adverse infrastructure and behavioral lock-ins and prompt low carbon development.     

Factors affecting public transportation,car, and motorcycle usage

This study established a hypothesis model based on the seemingly unrelated regression equations (SURE) model to investigate the relationship between public transportation, car, and motorcycle use in various townships in Taiwan and to analyse important factors that affect the usage of these modes. The SURE model was adopted because of the lack of a significant correlation between the dependent variables. The pairwise covariance analysis for any two of the three transportation modes revealed that the transportation modes could substitute for one another. Factors related to modal and demographic characteristics had different impacts on the usage of the three modes. The calculation of elasticity using different population densities and public transportation usage showed that when the ‘number of city bus routes’ was increased by 50% in areas with high population density and high public transportation usage, car usage decreased by 1.4%, which corresponds to 300,000 vehicles, and total CO₂ emissions reduced by 0.0204%. When the ‘total length of city bus routes’ was increased by 50%, the number of motorcycles used decreased by 83 million, and total CO₂ emissions reduced by 1.119%, which corresponds to 1.4 million tonnes of CO₂ emission. These findings suggest that these different factors had varying impacts on car and motorcycle usage in different areas. We therefore recommended that future transportation policies consider the varying transportation usage trends in different areas.     

Assessing CO2 emissions of electric vehicles in Germany in 2030

Electric vehicles are often said to reduce carbon dioxide (CO₂) emissions. However, the results of current comparisons with conventional vehicles are not always in favor of electric vehicles. We outline that this is not only due to the different assumptions in the time of charging and the country-specific electricity generation mix, but also due to the applied assessment method. We, therefore, discuss four assessment methods (average annual electricity mix, average time-dependent electricity mix, marginal electricity mix, and balancing zero emissions) and analyze the corresponding CO₂ emissions for Germany in 2030 using an optimizing energy system model (PERSEUS-NET-TS). Furthermore, we distinguish between an uncontrolled (i.e. direct) charging and an optimized controlled charging strategy. For Germany, the different assessment methods lead to substantial discrepancies in CO₂ emissions for 2030 ranging from no emissions to about 0.55 kg/kWh_el (110 g/km). These emissions partly exceed the emissions from internal combustion engine vehicles. Furthermore, depending on the underlying power plant portfolio and the controlling objective, controlled charging might help to reduce CO₂ emissions and relieve the electricity grid. We therefore recommend to support controlled charging, to develop consistent methodologies to address key factors affecting CO₂ emissions by electric vehicles, and to implement efficient policy instruments which guarantee emission free mobility with electric vehicles agreed upon by researchers and policy makers.     

Comparing the impact of future airline network change on emissions in India and the United States

In this paper we use simulation to analyze how flight routing network structure may change in different world regions, and how this might impact future traffic growth and emissions. We compare models of the domestic Indian and US air transportation systems, representing developing and mature air transportation systems respectively. We explicitly model passenger and airline decision-making, capturing passenger demand effects and airline operational responses, including airline network change. The models are applied to simulate air transportation system growth for networks of 49 airports in each country from 2005 to 2050. In India, the percentage of connecting passengers simulated decreases significantly (from over 40% in 2005 to under 10% in 2050), indicating that a shift in network structure towards increased point-to-point routing can be expected. In contrast, very little network change is simulated for the US airport set modeled. The simulated impact of network change on system CO₂ emissions is very small, although in the case of India it could enable a large increase in demand, and therefore a significant reduction in emissions per passenger (by nearly 25%). NO_x emissions at major hub airports are also estimated, and could initially reduce relative to a case in which network change is not simulated (by nearly 25% in the case of Mumbai in 2025). This effect, however, is significantly reduced by 2050 because of frequency competition effects. We conclude that network effects are important when estimating CO₂ emissions per passenger and local air quality effects at hub airports in developing air transportation systems.     

A study of feasibility and potential benefits of organised car sharing in Ireland

In this study, the market potential of car sharing has been evaluated using multiple alternative scenarios which examine the geographic, financial and environmental factors influencing car sharing adoption. The scenarios are applied to the available and collected travel information of the Irish population to estimate the potential impact of introducing car sharing in Ireland. The analysis identified that car owners who travel predominantly on alternative modes, could make significant cost and CO₂ savings through car sharing. A reduction of yearly CO₂ emissions of 86 kt is readily achievable through car sharing, with reductions up to 895 kt possible with appropriate policy and financial support. These figures are comparable to other measures proposed under the Irish National Climate Change Strategy.     

Well-to-wheel analysis for electric, diesel and hydrogen traction for railways

This paper derives the energy efficiencies and CO₂ emissions for electric, diesel and hydrogen traction for railway vehicles on a well-to-wheel basis, using the low heating value and high heating value of the enthalpy of oxidation of the fuel. The tank-to-wheel and well-to-tank efficiency are determined. Gaseous hydrogen has a WTW efficiency of 25% low heating value, if produced from methane and used in a fuel cell. This efficiency is similar to diesel and electric traction in the UK, US, and California. A reduction of about 19% in CO₂ is achieved when hydrogen gas is used in a fuel cell compared to diesel traction, and a 3% reduction compared to US electricity.