Observed and simulated traffic impacts from the 2013 Bay Area Rapid Transit strike

Despite high costs, many cities build public transit to address regional equity, environmental and economic goals. Although public transit accounts for a minority of trips (～5%), the impact is widely felt when service is suspended during a strike through excess road demand and slower journeys. In 2013, Bay Area Rapid Transit (BART) workers participated in two brief strikes, and the resulting traffic conditions illustrate the value of transit to drivers in the San Francisco Bay Area region. This paper tests the impact of rail transit service interruption on freeway traffic conditions using volumes and travel times. During the strike, regional freeway conditions showed negligible change. However, on facilities that parallel BART service, the impacts are as bad as the worst day of a typical week. Conditions on the San Francisco–Oakland Bay Bridge showed significant impacts with travel times and volumes nearly doubling the baseline median values on the worst day.     

GIS-based transit trip allocation methods converting stop-level boarding and alighting trips into TAZ trips

ABSTRACT

This study introduces a framework to improve the utilization of new data sources such as automated vehicle location (AVL) and automated passenger counting (APC) systems in transit ridership forecasting models. The direct application of AVL/APC data to travel forecasting requires an important intermediary step that links stops and activities – boarding and alighting – to the actual locations (at the traffic analysis zone (TAZ) level) that generated/attracted these trips. GIS-based transit trip allocation methods are developed with a focus on considering the case when the access shed spans multiple TAZs. The proposed methods improve practical applicability with easily obtained data. The performance of the proposed allocation methods is further evaluated using transit on-board survey data. The results show that the methods can effectively handle various conditions, particularly for major activity generators. The average errors between observed data and the proposed method are about 8% for alighting trips and 18% for boarding trips.     

Economic and service comparison of conventional bus and automated transit—a case study

Three origin‐destination matrices of inter‐zonal person trips for a section of the Los Angeles metropolitan region are analyzed using principal component analysis. The matrices represent total person trips, journey‐to‐work trips, and shopping trips. This allows for the identification of a number of sub‐regional travel fields or functional regions within the area. The composition of and interrelationships between these fields and the spatial coincidence of fields defined for different travel purposes are compared with existing and proposed public transit facilities.     

A study of traveler behavior under traffic information-provided conditions in the Beijing area

ABSTRACT

The quality of traffic information has become one of the most important factors that can affect the distribution of urban and highway traffic flow by changing the travel route, transportation mode, and travel time of travelers and trips. Past research has revealed traveler behavior when traffic information is provided. This paper summarizes the related study achievements from a survey conducted in the Beijing area with a specially designed questionnaire considering traffic conditions and the provision of traffic information services. With the survey data, a Logit model is estimated, and the results indicate that travel time can be considered the most significant factor that affects highway travel mode choice between private vehicles and public transit, whereas trip purpose is the least significant factor for private vehicle usage for both urban and highway travel.     

Applying a structured simulation-based methodology to assess carpooling time–space potential

Abstract

Increasing urban traffic congestion calls for the study of alternative measures. One such measure is carpooling, a system in which a person shares his private vehicle with one or more people in a commuter trip. In principle, this system could lead to potentially significant reductions in the use of private vehicles; however, in practice it has achieved limited success. In this paper, we apply a simulation-based methodology that uses aggregated data from commuter trips in an urban area to create compatible and feasible random trips. These are then analyzed through a heuristic process recursively to find grouping possibilities, thus producing indicators of carpooling potential such as the percentage of matched trips. Using this methodology, simulations are run for the Lisbon Metropolitan Area (Portugal) and results show that an increase in the number of participants in a carpooling scheme will only increase the probability of matching up to a certain point, and that this probability varies significantly with time–space trip attributes.     

An empirical study of simulation-based dynamic traffic assignment procedures

Abstract

Under Intelligent Transportation Systems (ITS), real-time operations of traffic management measures depend on long-term planning results, such as the origin–destination (OD) trip distribution; however, results from current planning procedures are unable to provide fundamental data for dynamic analysis. In order to capture dynamic traffic characteristics, transportation planning models should play an important role to integrate basic data with real-time traffic management and control. In this paper, a heuristic algorithm is proposed to establish the linkage between daily OD trips and dynamic traffic assignment (DTA) procedures; thus results from transportation planning projects, in terms of daily OD trips, can be extended to estimate time-dependent OD trips. Field data from Taiwan are collected and applied in the calibration and validation processes. Dynamic Network Assignment-Simulation Model for Advanced Road Telematics (DYNASMART-P), a simulation-based DTA model, is applied to generate time-dependent flows. The results from the validation process show high agreement between actual flows from vehicle detectors (VDs) and simulated flows from DYNAMSART-P.     

Passing Bays for Slow Moving Vehicles on Rural Two‐lane Roads

Abstract

Slow‐moving vehicles, including agricultural vehicles, on arterial highways can cause serious delays to other traffic as well as posing an extra safety risk. This paper elaborates on a small‐scale solution for these problems: the passing bay. It investigates the impacts of a passing bay on the total delay for other motorized vehicles, the number of passing manoeuvres and hindered vehicles, and the mean delay per hindered vehicle. The latter is also considered to be an indicator for traffic safety. The calculations are performed for two characteristic trips with a slow‐moving vehicle. The passing bay is an effective solution to reducing delays on arterial highways when two‐way hourly volumes exceed 600–1000 vehicles. The effects depend on the trip length and speed of the slow‐moving vehicle, and on the passing sight distance limitations of the road. A distance of 2–4?km between the passing bays seems an acceptable compromise between the reduction of delay for other motorized vehicles and the extra discomfort and delay for drivers of slow‐moving vehicles. This result also shows that passing bays are not effective in regions where slow‐moving vehicles mainly make trips shorter than this distance.     

Analyzing the impact of a planned transit-oriented development on mode share and traffic conditions

ABSTRACT

Transit-oriented development (TOD) is a popular planning strategy used to maximize accessibility to transit for various trip purposes. The quantitative effects of TOD on travel mode shift and traffic congestion have not been extensively tested in the current literature. This paper utilizes a seemingly unrelated regressions (SUR) mode share model and a mesoscopic dynamic traffic assignment (DTA) model to analyze the impact of a planned TOD in Maryland. The proposed model aims at improving the understanding of the quantitative impacts of such a TOD on mode share and traffic congestion. The main result of the mode share model indicates that the increase in transit ridership for a transit accessible shopping center is not that significant. Local traffic conditions will deteriorate due to a lack of investment in road infrastructure planned for the TOD area. The proposed method could be a valuable tool for other indicative land development or transportation policy analyses.     

Short-term impact analysis of fuel price policy change on travel demand in Malaysian cities

Abstract

Malaysia is one of the few countries in the world that provides a fuel subsidy to consumers. Due to the recent economic crisis, the Malaysian Government decided to revise its fuel subsidization policy from a fixed price subsidy to a floating price subsidy dependent on global oil demand. Recognizing that the change in fuel subsidization policy can have an impact on travel behavior, this article investigates the short-term impact of the policy change on private and public transportation in the Klang Valley region of Malaysia. Spectral analyses are performed to investigate if the policy change has an impact on private vehicle travel demand, measured in terms of road traffic, and short-term travel demand elasticity with respect to fuel price is estimated. To measure the impact on the public transportation system, the demand cross-elasticity values of rail transit and buses are also estimated. It was found that traffic flow reduces with an increase in fuel price, although elasticity and cross-elasticity values obtained are low. The article finds that there is a potential mode shift from private vehicles to rail transit with increasing fuel price. It is demonstrated that reducing fuel price subsidy can be an effective travel demand management strategy to alleviate congestion.     

Analysis of light rail rider travel behavior: Impacts of individual,built environment,and crime characteristics on transit access

This paper analyzes factors that influence the mode choice for trips between home and light rail stations, an often neglected part of a person’s trip making behavior. This is important for transit planning, demand modeling, and transit oriented development. Using transit survey data describing St. Louis MetroLink riders in the United States, this study found that some of the factors associated with increased shares of walking relative to other modes were full-time student status, higher income transit riders, and trips made during the evening. It was also found that crime at stations had an impact. In particular, crime made female transit riders more likely to be picked-up/dropped-off at the station. Females are more likely to be picked-up or dropped-off at night. Bus availability and convenience showed that transit riders that have a direct bus connection to a light rail station were more likely to use the bus. Private vehicle availability was strongly associated with increased probability of drive and park, when connecting to light rail.     

Identifying the spatial distribution of public transportation trips by node and community characteristics

ABSTRACT

Identifying the spatial distribution of travel activities can help public transportation managers optimize the allocation of resources. In this paper, transit networks are constructed based on traffic flow data rather than network topologies. The PageRank algorithm and community detection method are combined to identify the spatial distribution of public transportation trips. The structural centrality and PageRank values are compared to identify hub stations; the community detection method is applied to reveal the community structures. A case study in Guangzhou, China is presented. It is found that the bus network has a community structure, significant weekday commuting and small-world characteristics. The metro network is tightly connected, highly loaded, and has no obvious community structure. Hub stations show distinct differences in terms of volume and weekend/weekday usage. The results imply that the proposed method can be used to identify the spatial distribution of urban public transportation and provide a new study perspective.     

Control Concepts for Facilitating Motorway On-ramp Merging Using Intelligent Vehicles

Abstract

Congestion at motorway junctions is a traffic phenomenon that degrades operation of infrastructure and can lead to breakdown of traffic flow and associated reduction in capacity. Advanced communication technologies open new possibilities to prevent or at least delay this phenomenon, and innovative active traffic management systems have been developed in the recent years for better control of motorway traffic. This paper presents a review of control strategies for facilitating motorway on-ramp merging using intelligent vehicles. First, the concepts of the control algorithms are reviewed chronologically divided into three types of intelligent vehicle: completely automated, equipped with cooperative adaptive cruise control and equipped with on-board display. Then, a common structure is identified, and the algorithms are presented based on their characteristics in order to identify similarities, dissimilarities, trends and possible future research directions. Finally, using a similar approach, a review of the methods used to evaluate these control strategies identifies important aspects that should be considered by further research on this topic.     

Coordinating buses and rapid rail in the San Francisco Bay Area: The case of Bay Area Rapid Transit

This paper examines attempts by planners and policy makers to analyze and bring about the coordination of rail and bus transit in the San Francisco Bay Area. Drawing on studies and plans before and after the creation of the rapid rail system BART (Bay Area Rapid Transit), the author points to technical, analytical and political problems in attempts to link BART and buses. Some options and cautions are presented for planners considering route coordination, feeder buses, transfers and institutional arrangements to manage bus and rail services.     

Microscopic simulation of transit operations: policy studies with the MISTRANSIT application programming interface

Abstract

Microscopic traffic simulators are the most advanced tools for representing the movement of vehicles on a transport network. However, the energy spent in traffic microsimulation has been mainly oriented to cars. Little interest has been devoted to more sophisticated models for simulating transit systems. Commercial software has some options to incorporate the operation of transit vehicles, but they are insufficient to properly consider a real public transport system. This paper develops an Application Programming Interface, called MIcroscopic Simulation of TRANSIT (MISTRANSIT), using the commercial microsimulator PARAllel MICroscopic Simulation. MISTRANSIT makes advances in three ways: public transport vehicles can have new characteristics; passengers are incorporated and traced as individual objects; and specific models represent the interaction between passengers and vehicles at stops. This paper presents the modelling approach as well as various experiments to illustrate the feasibility of MISTRANSIT for studying policy operations of transit systems.     

Arterial traffic signal optimization: A person-based approach

This paper presents a real-time signal control system that optimizes signal settings based on minimization of person delay on arterials. The system’s underlying mixed integer linear program minimizes person delay by explicitly accounting for the passenger occupancy of autos and transit vehicles. This way it can provide signal priority to transit vehicles in an efficient way even when they travel in conflicting directions. Furthermore, it recognizes the importance of schedule adherence for reliable transit operations and accounts for it by assigning an additional weighting factor on transit delays. This introduces another criterion for resolving the issue of assigning priority to conflicting transit routes. At the same time, the system maintains auto vehicle progression by introducing the appropriate delays associated with interruptions of platoons. In addition to the fact that it utilizes readily available technologies to obtain the inputs for the optimization, the system’s feasibility in real-world settings is enhanced by its low computation time. The proposed signal control system is tested on a four-intersection segment of San Pablo Avenue arterial located in Berkeley, California. The findings show the system’s capability to outperform pretimed (i.e., fixed-time) optimal signal settings by reducing total person delay. They have also demonstrated its success in reducing bus person delay by efficiently providing priority to transit vehicles even when they travel in conflicting directions.     

Comfort and Safety as Perceived by Wheelchair-Seated Bus Passengers

Abstract

Wheelchair-seated passengers on European and Swedish urban transit buses can travel rearwards, resting against a bulkhead, without the use of tie-down equipment. However, users sometimes disapprove of being the only passengers who have to travel rearwards, and also unrestrained. In order to investigate comfort and safety as perceived by wheelchair-seated bus passengers riding either forwards or rearwards, an experimental field study was carried out. Participating subjects were 31 wheelchair users and a group of 44 ambulant passengers. Each subject made two consecutive, identical 15-minute trips, randomly beginning either forwards or backwards, and interviews were conducted after each trip. During the trips, three-axis bus motion was recorded. The concept of categorization was used as a theoretical background and basis for discussion of the comfort and safety constructs. The results indicated that while the majority preferred the forward-facing position regarding comfort issues, a minority felt that the level of perceived safety was better. Wheelchair-seated passengers were more positive towards the rearward position than the ambulant group.     

Cooperation in transit delivery in West German metropolitan areas

West Germany is densely populated, averaging 245 inhabitants/km², but varying widely between urban agglomerations and rural areas. Transport volume has increased by 40% since 1970, with virtually all growth due to private automobiles. Since 1981 public transit has been suffering from decreasing demand.A 1964 Expert's Report to the German federal government was the stimulus for initiating an effective funding mechanism for new public transit construction. In 1965 Germany's first federated transit authority was founded for the region of Hamburg.Principal among the goals of any cooperative agreement among transit companies are improvements for the passengers and improvement of revenues for the companies. To attain these ends, two distinct forms of transit aggrements have been developed in Germany: transit cooperative (Verkehrsgemeinschaft) and transit federation (Verkehrsverbund). The former is more suitable for smaller to medium-sized towns, while the latter is more suitable for larger cities. The two types are described in this article.German transit federations during the 1970s succeeded in significantly increasing ridership, while during the 1980s patronage has either remained steady or has declined. Yet transit federations showed much better perfomance than did public transit in general. In terms of costs and revenues, no public transit organization in Germany is able to break even; deficits vary between 42% and 55%. The author concludes, however, that hidden subsidies for automobile traffic are far higher, because of environmental damage and the high social cost of traffic accidents.     

Traffic generated by mixed-use developments—A follow-up 31-region study

This study aims to improve a previously-developed methodology for predicting the traffic impacts of mixed-use developments (MXDs). In 31 diverse metropolitan regions across the United States, we collected consistent regional household travel survey data and computed built environment characteristics—D variables—of MXDs. Multilevel modeling (MLM) was employed to predict the probability of trips captured internally within MXDs, walking on internal trips, and travel mode choice on external trips, by trip purpose. Larger, denser, mixed-use, and more walkable MXDs show a larger share of trips internally, compared with conventional suburban developments. Those MXDs with good access to transit, employment, and destinations also show higher levels of walking, biking, and transit shares on external trips, thus helping to reduce traffic impacts on the external road network. Perhaps the most impressive finding is that well-designed MXDs have walk shares of more than 50 percent on internal trips. A k-fold cross-validation supports the robustness of our analyses.     

Modeling transit vehicle repair duration and active service time

Abstract

The need for dependable and flexible models of transit vehicle maintenance has been well established in the literature as a means for improving daily operations, capital planning and service quality. Stemming from the practical need to predict the duration of maintenance activities and active service time for buses, this paper uses the principles of duration modeling to address two important questions: what is the duration of vehicle maintenance activities and, given that a bus is in active service, how long will it take? We extend previous work by including exogenous factors directly affecting maintenance duration and active service time in fully parametric duration models and examine such activities for the transit system in Athens (Greece). Results indicate that vehicle age, kilometers travelled and repair type are amongst the most important determinants of maintenance duration.