Equity-oriented skip-stopping schedule optimization in an oversaturated urban rail transit network

In this study, we focus on improving system-wide equity performance in an oversaturated urban rail transit network based on multi-commodity flow formulation. From the system perspective, an urban rail transit network is a distributed system, where a set of resources (i.e., train capacity) is shared by a number of users (i.e., passengers), and equitable individuals and groups should receive equal shares of resources. However, when oversaturation occurs in an urban rail transit network during peak hours, passengers waiting at different stations may receive varying shares of train capacity leading to the inequity problem under train all-stopping pattern. Train skip-stopping pattern is an effective operational approach, which holds back some passengers at stations and re-routes their journeys in the time dimension based on the available capacity of each train. In this study, the inequity problem in an oversaturated urban rail transit network is analyzed using a multi-commodity flow modeling framework. In detail, first, discretized states, corresponding to the number of missed trains for passengers, are constructed in a space-time-state three-dimensional network, so that the system-wide equity performance can be viewed as a distribution of all passengers in different states. Different from existing flow-based optimization models, we formulate individual passenger and train stopping pattern as commodity and network structure in the multi-commodity flow-modeling framework, respectively. Then, we aim to find an optimal commodity flow and well-designed network structure through the proposed multi-commodity flow model and simultaneously achieve the equitable distribution of all passengers and the optimal train skip-stopping pattern. To quickly solve the proposed model and find an optimal train skip-stopping pattern with preferable system-wide equity performance, the proposed linear programming model can be effectively decomposed to a least-cost sub-problem with positive arc costs for each individual passenger and a least-cost sub-problem with negative arc costs for each individual train under a Lagrangian relaxation framework. For application and implementation, the proposed train skip-stopping optimization model is applied to a simple case and a real-world case based on Batong Line in the Beijing Subway Network. The simple case demonstrates that our proposed Lagrangian relaxation framework can obtain the approximate optimal solution with a small-gap lower bound and a lot of computing time saved compared with CPLEX solver. The real-world case based on Batong Line in the Beijing Subway Network compares the equity and efficiency indices under the operational approach of train skip-stopping pattern with those under the train all-stopping pattern to state the advantage of the train skip-stopping operational approach.     

Improved customs inspection at a small international airport: Case study: Colombo

The present procedures for processing arriving passengers at the Colombo International Airport cause inordinte waiting times. An alternate plan, which is based on state of the art customs procedures, and which can reduce waiting times significantly while maintaining a high level of enforcement, is proposed. The present and proposed procedures are analyzed and compared with respect to passenger waiting times, using deterministic queueing theory. An optimal inspection rate of passengers by the customs service is proposed taking into account the fraction of inspected passengers, the waiting time of passengers and the cost of customs processing.     

Dispatching control at transfer stations in multi‐hub transit networks

Among dispatching control approaches, the holding option has attracted the most attention in bus control. However, holding a vehicle at a transfer station may exacerbate the delays because more passengers might accumulate at downstream stations and may also affect other connecting routes at other transfer stations. Our problem is to minimize the total costs of dispatching ready vehicles at each transfer station along coordinated routes in a multi‐hub transit network. The total costs include the waiting cost for on‐board passengers, the missed connection costs for late arrival passengers at the subject transfer station and possible transfer costs at downstream transfer stations. We develop a heuristic algorithm to optimize the holding times based on real time information about late vehicles. The results show that ready vehicles should be held longer when the arrival variances of late vehicles are small or when many late connecting passengers are expected.     

Passenger-demands-oriented train scheduling for an urban rail transit network

This paper considers the train scheduling problem for an urban rail transit network. We propose an event-driven model that involves three types of events, i.e., departure events, arrival events, and passenger arrival rates change events. The routing of the arriving passengers at transfer stations is also included in the train scheduling model. Moreover, the passenger transfer behavior (i.e., walking times and transfer times of passengers) is also taken into account in the model formulation. The resulting optimization problem is a real-valued nonlinear nonconvex problem. Nonlinear programming approaches (e.g., sequential quadratic programming) and evolutionary algorithms (e.g., genetic algorithms) can be used to solve this train scheduling problem. The effectiveness of the event-driven model is evaluated through a case study.     

地铁车站票务设备节能优化研究

为解决城市轨道交通车站售票能力冗余导致城市电力资源及地铁公司运营成本闲置的问题,分析普通车站日常客流分布,综合考虑地铁车站售票设备成本和乘客的时间成本因素,建立地铁车站售票设备开启数量优化模型,同时通过排队论和Lingo软件进行计算,获得最优化的地铁车站售票设备开启数量。以郑州地铁农业南路站的日常客流为例,应用地铁车站售票设备开启数量优化模型,计算得到农业南路站售票设备优化方案,通过优化方案进行节能成果分析证明,该方案可有效节约城市电力资源及地铁公司运营成本。     

Passenger arrival and waiting time distributions dependent on train service frequency and station characteristics: A smart card data analysis

Waiting time at public transport stops is perceived by passengers to be more onerous than in-vehicle time, hence it strongly influences the attractiveness and use of public transport. Transport models traditionally assume that average waiting times are half the service headway by assuming random passenger arrivals. However, research agree that two distinct passenger behaviour types exist: one group arrives randomly, whereas another group actively tries to minimise their waiting time by arriving in a timely manner at the scheduled departure time. This study proposes a general framework for estimating passenger waiting times which incorporates the arrival patterns of these two groups explicitly, namely by using a mixture distribution consisting of a uniform and a beta distribution. The framework is empirically validated using a large-scale automatic fare collection system from the Greater Copenhagen Area covering metro, suburban, and regional rail stations thereby giving a range of service headways from 2 to 60 min. It was shown that the proposed mixture distribution is superior to other distributions proposed in the literature. This can improve waiting time estimations in public transport models. The results show that even at 5-min headways 43% of passengers arrive in a timely manner to stations when timetables are available. The results bear important policy implications in terms of providing actual timetables, even at high service frequencies, in order for passengers to be able to minimise their waiting times.     

A multiobjective planning model for intercity train seat allocation

This paper presents a multiobjective planning model for generating optimal train seat allocation plans on an intercity rail line serving passengers with many‐to‐many origin‐destination pairs. Two planning objectives of the model are to maximise the operator's total passenger revenue and to minimise the passenger's total discomfort level. For a given set of travel demand, train capacity, and train stop‐schedules, the model is solved by fuzzy mathematical programming to generate a best‐compromise train seat allocation plan. The plan determines how many reserved and non‐reserved seats are to be allocated at each origin station for all subsequent destination stations on each train run operated within a specified operating period. An empirical study on the to‐be‐built Taiwan's high‐speed rail system is conducted to demonstrate the effectiveness of the model. The model can be used for any setting of travel demand and stop‐schedules with various train seating capacities.     

Train boarding and alighting rates at high passenger loads

Line capacity in metro and high‐frequency suburban railways is as much determined by station stop times as by factors such as line speed or train acceleration. This paper applies the method developed by London Underground to estimate the time that trains spend at stations, as a function of the physical characteristics of the situation (e.g. train door width) and the numbers of passengers involved. Analysis was carried out on a number of alternative designs for refurbishment of South West Trains' Class 455 inner‐suburban rolling stock. Whilst there is indeed an interaction between boarding and alighting passengers, this paper demonstrates that the LUL relationship breaks down at the highest passenger loads. Moreover, results indicate that passenger flow is not equal between different parts of the same group of boarders or alighters.     

Development of efficient stop planning optimization process for high‐speed rail systems

The Taiwan High Speed Rail (THSR) has recently added three additional stations to its original network. Although the three additional stations can improve accessibility to the system, these new stations can present difficulties in the transportation planning process, particularly for planning of train stops. The additional stations may benefit some passengers, but may also lengthen the travel time for the other passengers. Therefore, the main challenge faced by THSR is finding an efficient way to design appropriate stopping patterns. Past studies on stop planning usually adopted meta‐heuristics or decomposition methods to solve this complex problem. Although these solution techniques can improve solution efficiency, none of them can guarantee the optimality of the solution and capture the transfer movement of different stopping patterns. In this research, we proposed an innovative network structure to address complex stop planning problems for high‐speed rail systems. Given its special network structure, two binary integer programming models were developed to simultaneously form and determine the optimal stopping patterns for real‐world THSR stop planning problems. An optimization process was also developed to accurately estimate the station transfer time corresponding to the variation in stopping patterns and passenger flow. Results of the case studies suggest that the proposed binary integer programming models exhibit superior solution quality and efficiency over existing exact optimization models. Consequently, using this stop planning optimization process can help high‐speed rail system planners in designing optimal stopping patterns that correspond to passenger demand. Copyright © 2017 John Wiley & Sons, Ltd.     

An investigation of passenger interchange and train standing time at LRT stations: (i) Alighting,boarding and platform distribution of passengers

The train standing-time at a station is a determinant of the line capacity and the necessary fleet-size. Its determination is usually based on the assumption that boarding and alighting is uniform at all doors of a train. Uniform boarding and alighting is conceivable if passengers distribute themselves uniformly on station platforms while waiting for trains. The validity of the uniformity assumptions is tested using data from two stations (one CBD, one suburban) of the Calgary, Alberta LRT system. It is shown that passenger distribution on the platform, alighting and boarding is not uniform and is closely related to the location of platform access points. Some strategies that will encourage uniformity are discussed. However, procedures that can estimate the standing time for non-uniform boarding and alighting need to be developed.     

Comparing static and dynamic threshold based control strategies

This research extends a static threshold based control strategy used to control headway variation to a dynamic threshold based control strategy. In the static strategy, buses are controlled by setting a threshold value that holds buses at a control point for a certain amount of time before allowing the bus to continue along the route. The threshold remains constant each time the bus stops at the control point. The dynamic strategy involves the same principle of holding buses at a bus stop; however, a different threshold value is chosen each time the bus holds at a control point. The results indicate that in cases where the static threshold is set equal to the scheduled headway, very low headway variation and passenger system times result; however, passengers on board the bus are penalized by extra delay on the bus while waiting at the control point. The dynamic strategy reduces the penalty to passengers delayed on-board the bus at a control point at the expense of a slight increase in overall passenger system time.The results indicate that in most cases, the tradeoff of the slight increase in waiting time for the significant decrease in on-board delay penalty makes the dynamic strategy an acceptable choice.     

A bi-level model for single-line rail timetable design with consideration of demand and capacity

This paper proposes a bi-level model to solve the timetable design problem for an urban rail line. The upper level model aims at determining the headways between trains to minimize total passenger cost, which includes not only the usual perceived travel time cost, but also penalties during travel. With the headways given by the upper level model, passengers’ arrival times at their origin stops are determined by the lower level model, in which the cost-minimizing behavior of each passenger is taken into account. To make the model more realistic, explicit capacity constraints of individual trains are considered. With these constraints, passengers cannot board a full train, but wait in queues for the next coming train. A two-stage genetic algorithm incorporating the method of successive averages is introduced to solve the bi-level model. Two hypothetical examples and a real world case are employed to evaluate the effectiveness of the proposed bi-level model and algorithm. Results show that the bi-level model performs well in reducing total passenger cost, especially in reducing waiting time cost and penalties. And the section loading-rates of trains in the optimized timetable are more balanced than the even-headway timetable. The sensitivity analyses show that passenger’s desired arrival time interval at destination and crowding penalty factor have a high influence on the optimal solution. And with the dispersing of passengers' desired arrival time intervals or the increase of crowding penalty factor, the section loading-rates of trains become more balanced.     

Passengers' perceptions and effects of bus‐holding strategy using automatic vehicle location technology

This study reports bus passengers' behavior and perceptions related to the use of potential features of an automatic vehicle location (AVL) system in bus transit through conducting an attitudinal on‐board survey in Bangkok. A passenger waiting‐time survey conducted as part of this study revealed that passengers perceive waiting‐time at bus stops to be greater than actually experienced. The other aim of this study is to examine the potential benefits of bus‐holding using an AVL technology, in terms of waiting‐time, through minimizing bus bunching under different congestion levels. The results are obtained using PARAMICS, and reveal a significant reduction in average waiting‐time.     

Energy-efficient metro train rescheduling with uncertain time-variant passenger demands: An approximate dynamic programming approach

In a heavily congested metro line, unexpected disturbances often occur to cause the delay of the traveling passengers, infeasibility of the current timetable and reduction of the operational efficiency. Due to the uncertain and dynamic characteristics of passenger demands, the commonly used method to recover from disturbances in practice is to change the timetable and rolling stock manually based on the experiences and professional judgements. In this paper, we develop a stochastic programming model for metro train rescheduling problem in order to jointly reduce the time delay of affected passengers, their total traveling time and operational costs of trains. To capture the complexity of passenger traveling characteristics, the arriving ratio of passengers at each station is modeled as a non-homogeneous poisson distribution, in which the intensity function is treated as time-varying origin-to-destination passenger demand matrices. By considering the number of on-board passengers, the total energy usage is modeled as the difference between the tractive energy consumption and the regenerative energy. Then, we design an approximate dynamic programming based algorithm to solve the proposed model, which can obtain a high-quality solution in a short time. Finally, numerical examples with real-world data sets are implemented to verify the effectiveness and robustness of the proposed approaches.     

A bi‐level programming approach — Optimal transit fare under line capacity constraints

The fare of a transit line is one of the important decision variables for transit network design. It has been advocated as an efficient means of coordinating the transit passenger flows and of alleviating congestion in the transit network. This paper shows how transit fare can be optimized so as to balance the passenger flow on the transit network and to reduce the overload delays of passengers at transit stops. A bi‐level programming method is developed to optimize the transit fare under line capacity constraints. The upper‐level problem seeks to minimize the total network travel time, while the lower‐level problem is a stochastic user equilibrium transit assignment model with line capacity constraints. A heuristic solution algorithm based on sensitivity analysis is proposed. Numerical example is used to illustrate the application of the proposed model and solution algorithm.     

Demand-driven timetable design for metro services

Timetable design is crucial to the metro service reliability. A straightforward and commonly adopted strategy in daily operation is a peak/off-peak-based schedule. However, such a strategy may fail to meet dynamic temporal passenger demand, resulting in long passenger waiting time at platforms and over-crowding in trains. Thanks to the emergence of smart card-based automated fare collection systems, we can now better quantify spatial–temporal demand on a microscopic level. In this paper, we formulate three optimization models to design demand-sensitive timetables by demonstrating train operation using equivalent time (interval). The first model aims at making the timetable more dynamic; the second model is an extension allowing for capacity constraints. The third model aims at designing a capacitated demand-sensitive peak/off-peak timetable. We assessed the performance of these three models and conducted sensitivity analyzes on different parameters on a metro line in Singapore, finding that dynamical timetable built with capacity constraints is most advantageous. Finally, we conclude our study and discuss the implications of the three models: the capacitated model provides a timetable which shows best performance under fixed capacity constraints, while the uncapacitated model may offer optimal temporal train configuration. Although we imposed capacity constraints when designing the optimal peak/off-peak timetable, its performance is not as good as models with dynamical headways. However, it shows advantages such as being easier to operate and more understandable to the passengers.     

Train scheduling for minimizing passenger waiting time with time-dependent demand and skip-stop patterns: Nonlinear integer programming models with linear constraints

This paper focuses on how to minimize the total passenger waiting time at stations by computing and adjusting train timetables for a rail corridor with given time-varying origin-to-destination passenger demand matrices. Given predetermined train skip-stop patterns, a unified quadratic integer programming model with linear constraints is developed to jointly synchronize effective passenger loading time windows and train arrival and departure times at each station. A set of quadratic and quasi-quadratic objective functions are proposed to precisely formulate the total waiting time under both minute-dependent demand and hour-dependent demand volumes from different origin–destination pairs. We construct mathematically rigorous and algorithmically tractable nonlinear mixed integer programming models for both real-time scheduling and medium-term planning applications. The proposed models are implemented using general purpose high-level optimization solvers, and the model effectiveness is further examined through numerical experiments of real-world rail train timetabling test cases.     

Train rescheduling model with train delay and passenger impatience time in urban subway network

This paper considers the train rescheduling problem with train delay in urban subway network. With the objective of minimizing the negative effect of train delay to passengers, which is quantified with a weighted combination of travel time cost and the cost of giving up the planned trips, train rescheduling model is proposed to jointly synchronize both train delay operation constraints and passenger behavior choices. Space–time network is proposed to describe passenger schedule‐based path choices and obtain the shortest travel times. Impatience time is defined to describe the intolerance of passengers to train delay. By comparing the increased travel time due to train delay with the passenger impatience time, a binary variable is defined to represent whether the passenger will give up their planned trips or not. The proposed train rescheduling model is implemented using genetic algorithm, and the model effectiveness is further examined through numerical experiments of real‐world urban subway train timetabling test. Duration effects of the train delay to the optimization results are analyzed. Copyright © 2017 John Wiley & Sons, Ltd.     

Precise estimation of connections of metro passengers from Smart Card data

The aim of this study is to estimate both the physical and schedule-based connections of metro passengers from their entry and exit times at the gates and the stations, a data set available from Smart Card transactions in a majority of train networks. By examining the Smart Card data, we will observe a set of transit behaviors of metro passengers, which is manifested by the time intervals that identifies the boarding, transferring, or alighting train at a station. The authenticity of the time intervals is ensured by separating a set of passengers whose trip has a unique connection that is predominantly better by all respects than any alternative connection. Since the connections of such passengers, known as reference passengers, can be readily determined and hence their gate times and stations can be used to derive reliable time intervals. To detect an unknown path of a passenger, the proposed method checks, for each alternative connection, if it admits a sequence of boarding, middle train(s), and alighting trains, whose time intervals are all consistent with the gate times and stations of the passenger, a necessary condition of a true connection. Tested on weekly 32 million trips, the proposed method detected unique connections satisfying the necessary condition, which are, therefore, most likely true physical and schedule-based connections in 92.6 and 83.4 %, respectively, of the cases.     

An investigation of passenger interchange and train standing time at LRT stations: (ii) Estimation of standing time

The standing-time of trains at urban rail stations is pertinent to determining the line capacity and fleet size. The assumption of uniform boarding and alighting leads to under-estimation of the standing time. It is shown that the train standing-time is related to the fraction of boarders and the maximum demand for boarding and alighting at a door. It is further shown that the probability distribution of passengers at a door depends on the platform entrance locations. A methodology that takes into account the above factors is proposed for estimating the train standing-time.