Using non-real-time Automatic Vehicle Location data to improve bus services

Although real-time Automatic Vehicle Location (AVL) data is being utilised successfully in the UK, little notice has been given to the benefits of historical (non-real-time) AVL data. This paper illustrates how historical AVL data can be used to identify segments of a bus route which would benefit most from bus priority measures and to improve scheduling by highlighting locations at which the greatest deviation from schedule occurs. A new methodology which uses historical AVL data and on-bus passenger counts to calculate the passenger arrival rate at stops along a bus route has been used to estimate annual patronage and the speed of buses as they move between stops. Estimating the patronage at stops using AVL data is more cost-effective than conventional methods (such as surveys at stops which require much more manpower) but retains the benefits of accuracy and stop-specific estimates of annual patronage. The passenger arrival rate can then be used to calculate how long buses spend at stops. If the time buses spend at stops is removed from the total time it takes the bus to traverse a link, the remaining amount of time can be assumed to be the time the bus spends moving and hence the moving speed of the bus can be obtained. It was found that estimation of patronage and the speed of buses as they move between stops using AVL data produced results which were comparable with those obtained by other methods. However the main point to note is that this new method of estimating patronage has the potential to provide a larger and superior data set than is otherwise available, at very low cost.     

Passenger waiting time and information acquisition using automatic vehicle location for verification

Bus riders utilize a variety of information media to learn how to travel to their destinations and to learn when they should arrive at bus stops. As part of the OCTA (Orange County Transit Authority) Transit Probe evaluation, 1199 passengers were surveyed to measure relationships between information acquisition and waiting time. A unique aspect of the survey was that some of the data could be correlated with automatic‐vehicle‐location (AVL) measurements of bus lateness at stops. Insights are provided as to the types of information riders acquire based on the nature of the trip and demographic characteristics. Insights are also provided as to factors affecting perceived waiting time. We found age group, whether a person needs to arrive at a destination by a specific time, primary language, and whether the person is a first‐time user of the bus line to be significant causal factors.     

Passengers' perceptions and effects of bus‐holding strategy using automatic vehicle location technology

This study reports bus passengers' behavior and perceptions related to the use of potential features of an automatic vehicle location (AVL) system in bus transit through conducting an attitudinal on‐board survey in Bangkok. A passenger waiting‐time survey conducted as part of this study revealed that passengers perceive waiting‐time at bus stops to be greater than actually experienced. The other aim of this study is to examine the potential benefits of bus‐holding using an AVL technology, in terms of waiting‐time, through minimizing bus bunching under different congestion levels. The results are obtained using PARAMICS, and reveal a significant reduction in average waiting‐time.     

Estimation of bus dwell time using univariate time series models

A significant proportion of bus travel time is contributed by dwell time for passenger boarding and alighting. More accurate estimation of bus dwell time (BDT) can enhance efficiency and reliability of public transportation system. Regression and probabilistic models are commonly used in literatures where a set of independent variables are used to define the statistical relationship between BDT and its contributing factors. However, due to technical and monetary constraints, it is not always feasible to collect all the data required for the models to work. More importantly, the contributing factors may vary from one bus route to another. Time series based methods can be of great interest as they require only historical time series data, which can be collected using a facility known as automatic vehicle location (AVL) system. This paper assesses four different time series based methods namely random walk, exponential smoothing, moving average (MA), and autoregressive integrated moving average to model and estimate BDT based on AVL data collected from Auckland. The performances of the proposed methods are ranked based on three important factors namely prediction accuracy, simplicity, and robustness. The models showed promising results and performed differently for central business district (CBD) and non‐CBD bus stops. For CBD bus stops, MA model performed the best, whereas for non‐CBD bus stops, ARIMA model performed the best compared with other time series based models. Copyright © 2014 John Wiley & Sons, Ltd.     

Time of day intervals partition for bus schedule using GPS data

Time of day partition of bus operating hours is a prerequisite of bus schedule design. Reasonable partition plan is essential to improve the punctuality and level of service. In most mega cities, bus vehicles have been equipped with global positioning system (GPS) devices, which is convenient for transit agency to monitor bus operations. In this paper, a new algorithm is developed based on GPS data to partition bus operating hours into time of day intervals. Firstly, the impacts of passenger demand and network traffic state on bus operational performance are analyzed. Then bus dwell time at stops and inter-stop travel time, which can be attained based on GPS data, are selected as partition indexes. For buses clustered in the same time-of-day interval, threshold values of differences in dwell time at stops and inter-stop travel time are determined. The buses in the same time-of-day interval should have adjacent dispatching numbers, which is set as a constraint. Consequently, a partition algorithm with three steps is developed. Finally, a bus route in Suzhou China is taken as an example to validate the algorithm. Three partition schemes are given by setting different threshold values for the two partition indexes. The present scheme in practice is compared with the three proposed schemes. To balance the number of ToD intervals and partition precision, a Benefit Evaluation Index is proposed, for a better time-of-day interval plan.     

Route choice stickiness of public transport passengers: Measuring habitual bus ridership behaviour using smart card data

This paper explores how we can use smart card data for bus passengers to reveal individual and aggregate travel behaviour. More specifically, we measure the extent to which both individual and bus routes exhibit habitual behaviour. To achieve this, we introduce a metric called Stickiness Index to quantify the range of preferences of users that always select to travel on the same route (high stickiness) to those with a more varied patterns of route selection (low stickiness). Adopting a visual analytic and modelling approach using a suite of regression models we find evidence to suggest that stickiness varies across the metropolitan area and over a 24-h period wherein higher stickiness is associated with high frequency users where there is substantial variability of route travel times across all alternatives. We argue that our findings are important in their capacity to contribute to a new evidence base with the potential to inform the (re)-design and scheduling of a public transit systems through unveiling the complexities of transit behaviour.     

Evaluating the effects of bus design on passenger flow: Is agent-based simulation a feasible approach?

In this paper, we propose an agent-based simulation approach that is capable of simulating the flow of passengers on board buses and at bus stops. The intention is that it will be applied during vehicle development to analyze how vehicle design affects passenger flow, and thus also how it affects system performance such as dwell time. In turn, this could aid the developers in making design decisions early in the development process. Besides introducing the simulation tool itself, the paper explores the realism of the data generated by the tool. A number of passenger flow experiments featuring a full-scale bus mockup and 50 participants were carried out. The setup of these experiments mirrored a number of ‘bus journeys’ (regarding vehicle design, number of passengers boarding/alighting at each stop and so on) that had previously been simulated using the simulation tool. When the data from the simulations were compared with the data from the passenger flow experiments, it could be concluded that the tool is indeed able to generate realistic passenger flows, although with some errors when a large number of passengers board/alight. The simulated dwell times were rationally affected by the tested bus layout aspects. It was concluded that the tool makes it possible to evaluate how variations in bus layouts affect passenger flow, providing data of sufficiently high quality to be useful in early phases of vehicle design.     

Performance assessment of bus transport reform in Seoul

Seoul city authority implemented an innovative bus transport reform (BTR) in July 2004. This paper evaluates the performance of that reform. To this end, the paper includes a discussion of the features of the reform, an explanation of the fields and the contents of the reform, and an assessment of the performance of the reform formulated by comparing pertinent circumstances in place before and after its inception. The performance of eight fields: bus routes, bus fares, bus management, bus operation, a new smart card, a median bus lane system, vehicles and stops, and the promotion of the BTR, are measured, as are the performances of four groups influenced by the BTR. Those groups are bus passengers, bus operators, transport regulators, and members of the wider civil community. The results indicate a readily apparent decrease in traffic density in Seoul after the introduction of the reform, and it would appear that the increase in the number of public transport users bears an inverse relationship with the decrease in the transport share of private cars.     

Analyzing urban bus service reliability at the stop, route, and network levels

Improving the reliability of bus service has the potential to increase the attractiveness of public transit to current and prospective riders. An understanding of service reliability is necessary to develop strategies that help transit agencies provide better services. However, few studies have been conducted analyzing bus reliability in the metropolis of China. This paper presents an in-depth analysis of service reliability based on bus operational characteristics in Beijing. Three performance parameters, punctuality index based on routes (PIR), deviation index based on stops (DIS), and evenness index based on stops (EIS), are proposed for the evaluation of bus service reliability. Reliability involves routes, stops, punctuality, deviation, and evenness. The relationship among the three parameters is discussed using a numerical example. Subsequently, through a sampling survey of bus lines in Beijing, service reliability at the stop, route, and network levels are estimated. The effects of route length, headway, the distance from the stop to the origin terminal, and the use of exclusive bus lanes are also analyzed. The results indicate low service reliability for buses in Beijing and a high correlation between service reliability and route length, headway, distance from the stop to the origin terminal, and the provision of exclusive bus lanes.     

Estimation of population origin–interchange–destination flows on multimodal transit networks

Previous research has combined automated fare-collection (AFC) and automated vehicle-location (AVL) data to infer the times and locations of passenger origins, interchanges (transfers), and destinations on multimodal transit networks. The resultant origin–interchange–destination flows (and the origin–destination (OD) matrices that comprise those flows), however, represent only a sample of total ridership, as they contain only those journeys made using the AFC payment method that have been successfully recorded or inferred. This paper presents a method for scaling passenger-journey flows (i.e., linked-trip flows) using additional information from passenger counts at each station gate and bus farebox, thereby estimating the flows of non-AFC passengers and of AFC passengers whose journeys were not successfully inferred.The proposed method is applied to a hypothetical test network and to AFC and AVL data from London’s multimodal public transit network. Because London requires AFC transactions upon both entry and exit for rail trips, a rail-only OD matrix is extracted from the estimated multimodal linked-trip flows, and is compared to a rail OD matrix generated using the iterative proportional fitting method.     

A model of bus bunching under reliability-based passenger arrival patterns

If bus service departure times are not completely unknown to the passengers, non-uniform passenger arrival patterns can be expected. We propose that passengers decide their arrival time at stops based on a continuous logit model that considers the risk of missing services. Expected passenger waiting times are derived in a bus system that allows also for overtaking between bus services. We then propose an algorithm to derive the dwell time of subsequent buses serving a stop in order to illustrate when bus bunching might occur. We show that non-uniform arrival patterns can significantly influence the bus bunching process. With case studies we find that, even without exogenous delay, bunching can arise when the boarding rate is insufficient given the level of overall demand. Further, in case of exogenous delay, non-uniform arrivals can either worsen or improve the bunching conditions, depending on the level of delay. We conclude that therefore such effects should be considered when service control measures are discussed.     

Estimating bus run times for new limited-stop service using archived AVL and APC data

In recent years, several transit agencies have been trying to be more competitive with the automobile to attract choice riders. Transit agencies can only be competitive if they can provide services that are reliable, have a short access and egress time, and have run times that are comparable to automobiles. Several transit agencies try to be competitive through offering faster service, such as limited-stop (express) bus service. This study uses AVL and APC data, in addition to a disaggregate data obtained from a travel behavior survey, to select stops and estimate run times for a new limited-stop service that will run parallel to a heavily used bus route (67 Saint-Michel) in Montréal, Canada. Three different scenarios are developed based on theory and practice to select stops to be incorporated in the new limited service. The time savings for each scenario are then evaluated as a range and a fourth scenario is developed. A limited-stop service is recommended based on selecting stops serving both directions of the route, major activity points and stop spacing. This study shows that implementing a limited-stop service would yield substantial time savings for both, the new limited service and the existing regular service running in parallel.     

Modeling and optimizing urban bus transit considering headway variation for cost and service reliability analysis

Due to the stochastic nature of traffic conditions and demand fluctuations, it is a challenging task for operators to maintain reliable services, and passengers often suffer from longer travel times. A failure to consider this issue while planning bus services may lead to undesirable results, such as higher costs and a deterioration in level of service. Considering headway variation at route stops, this paper develops a mathematical model to optimize bus stops and dispatching headways that minimize total cost, consisting of both user and operator costs. A Genetic Algorithm is applied to search for a cost-effective solution in a real-world case study of a bus transit system, which improves service reliability in terms of a reduced coefficient of variation of headway.     

The potential for real-time passenger information as part of an integrated bus-control/information system

This paper is concerned with the effect of linking innovative bus-control systems with real-time passenger information, with the overall aim of improving conditions for bus operation and passengers in central urban corridors. The first section presents a concise review of bus passenger information systems (particularly their application at bus stops). Then the concept of real-time passenger information is explored. The case for and against real-time information is argued and two British case-studies follow. In the second section it is argued that the provision of real-time information, as part of an integrated bus-control/information system, offers new possibilities for meeting the identified needs of public transport users. Finally, in the third section, some comments are made on the evaluation of different combinations of bus-control and passenger information tested using a simulation method and a series of subjective response surveys. General relationships governing the degree of bus-control required and the extent of information needed are of special interest.     

Analysis of real-time control strategies in a corridor with multiple bus services

Control strategies have been widely used in the literature to counteract the effects of bus bunching in passenger‘s waiting times and its variability. These strategies have only been studied for the case of a single bus line in a corridor. However, in many real cases this assumption does not hold. Indeed, there are many transit corridors with multiple bus lines interacting, and this interaction affects the efficiency of the implemented control mechanism.This work develops an optimization model capable of executing a control scheme based on holding strategy for a corridor with multiple bus lines.We analyzed the benefits in the level of service of the public transport system when considering a central operator who wants to maximize the level of service for users of all the bus lines, versus scenarios where each bus line operates independently. A simulation was carried out considering two medium frequency bus lines that serve a set of stops and where these two bus lines coexist in a given subset of stops. In the simulation we compared the existence of a central operator, using the optimization model we developed, against the independent operation of each line.In the simulations the central operator showed a greater reduction in the overall waiting time of the passengers of 55% compared to a no control scenario. It also provided a balanced load of the buses along the corridor, and a lower variability of the bus headways in the subset of stops where the lines coexist, thus obtaining better reliability for all types of passengers present in the public transport system.     

Promoting bike-and-ride: The Dutch experience

The number of policy initiatives to promote the use of bike-and-ride, or the combined use of bicycle and public transport for one trip, has grown considerably over the past decade as part of the search for more sustainable transport solutions. This paper discusses the experiences with, and impacts of, such initiatives in the Netherlands. The Dutch measures to promote bicycle use in access trips have been generally successful. A country-wide program to upgrade regular and secure bicycle parking at train stations has led to an increase in user satisfaction and a growth in bicycles parked at stations. Smaller programs to stimulate the combined use of bike-and-bus have resulted in an increase in bicycle use, bus use, and share of infrequent bus passengers. Bicycle lockers at bus stops are hardly used by bus passengers, due in part to the dominance of students among bus users as well as the relatively high price of lockers in comparison to the value of bicycles used for access trips. Measures to promote the use of the bicycle in egress trips have met with more varying results. Projects to introduce leasing bicycles for egress trips have failed to attract passengers, for both train and bus services. In contrast, the introduction of flexible rental bicycles at train stations has resulted in a small reduction in car use, growth in train trips, and growth in bicycle use for non-recurrent trips. The Dutch experiences suggest some lessons for promoting bike-and-ride in countries and cities with a less well-developed bicycle infrastructure.     

Representing stochastic transit dwell times in traffic signal optimization

It has been demonstrated that while the TRANSYT traffic model simulates transit vehicles in mixed traffic operation, it does not adequately consider the effects of bus or streetcar stops on the travelled roadway near signalized intersections. Its assumption that the transit vehicles do not hold up other vehicles while they are loading and unloading passengers is also invalid when midblock stops occur in the travelled lanes. To account for the effects of transit stops, an alternative type of network formulation which uses dummy nodes and dummy links with appropriate link costs is proposed for modelling the effects of transit stops. It approximates transit stop dwells by discrete distributions, requiring 1 dummy node and 4 dummy links for each nonzero value used in the approximating distribution. Realism for such operation can be improved significantly, usually with the use of only 1 or 2 dummy nodes per transit stop. Parameters for the dummy links have been tested over a wide range, and a set of operational values is recommended. Flow profiles illustrating the need for and the effects of the recommended formulation are presented in the paper.     

What is behind fare evasion in urban bus systems? An econometric approach

Fare evasion is a problem in many public transport systems around the world and policies to reduce it are generally aimed at improving control and increasing fines. We use an econometric approach to attempt explaining the high levels of evasion in Santiago, Chile, and guide public policy formulation to reduce this problem. In particular, a negative binomial count regression model allowed us to find that fare evasion rates on buses increase as: (i) more people board (or alight) at a given bus door, (ii) more passengers board by a rear door, (iii) buses have higher occupancy levels (and more doors) and (iv) passengers experience longer headways. By controlling these variables (ceteris paribus), results indicate that evasion is greater during the afternoon and evening, but it is not clear that it is higher during peak hours. Regarding socioeconomic variables, we found that fare evasion at bus stops located in higher income areas (municipalities) is significantly lower than in more deprived areas. Finally, based on our results we identified five main methods to address evasion as alternatives to more dedicated fine enforcement or increased inspection; (i) increasing the bus fleet, (ii) improving the bus headway regularity, (iii) implementing off-board payment stations, (iv) changing the payment system on board and (v) changing the bus design (number of doors or capacity). Our model provides a powerful tool to predict the reduction of fare evasion due to the implementation of some of these five operational strategies, and can be applied to other bus public transport systems.     

Maximizing bus discharge flows from multi-berth stops by regulating exit maneuvers

Upon having loaded and unloaded their passengers, buses are often free to exit a multi-berth bus stop without delay. A bus need not wait to perform this exit maneuver, even if it requires circumventing one or more other buses that are still dwelling in the stop’s downstream berths. Yet, many jurisdictions impose restrictions on bus entry maneuvers into a stop to limit disruptions to cars and other buses. Buses are typically prohibited from entering a stop whenever this would require maneuvering around other buses still dwelling in upstream berths. An entering bus is instead required to wait in queue until the upstream berths are vacated.Analytical models are formulated to predict how bus discharge flows from busy, multi-berth stops are affected by allowing buses to freely exit, but not freely enter berths. These models apply when: a bus queue is always present at the stop’s entrance; buses depart the entry queue and enter the stop as per the restriction described above; and the stop is isolated from the effects of nearby traffic signals and other bus stops. We find that for these restricted-entry stops, bus-carrying capacities can often be improved by regulating the exit maneuvers as well. This turns out to be particularly true when the stop’s number of berths is large. Simulations show that these findings still hold when a stop is only moderately busy with entry queues that persist for much, but not all of the time. The simulations also indicate that removing any restrictions on bus exit maneuvers is almost always productive when stops are not busy, such that short entry queues form only on occasion, and only for short periods. We argue why certain simple policies for regulating exit maneuvers would likely enhance bus-stop discharge flows.     

A zonal inference model based on observed smart-card transactions for Santiago de Chile

The collection of origin–destination data for a city is an important but often costly task. This way, there is a need to develop more efficient and inexpensive methods of collecting information about citizens’ travel patterns. In this line, this paper presents a generic methodology that allows to infer the origin and destination zones for an observed trip between two public transport stops (i.e., bus stops or metro stations) using socio-economic, land use, and network information. The proposed zonal inference model follows a disaggregated Logit approach including size variables. The model enables the estimation of a zonal origin–destination matrix for a city, if trip information passively collected by a smart-card payment system is available (in form of a stop-to-stop matrix). The methodology is applied to the Santiago de Chile’s morning peak period, with the purpose of serving as input for a public transport planning computational tool. To estimate the model, information was gathered from different sources and processed into a unified framework; data included a survey conducted at public transport stops, land use information, and a stop-to-stop trip matrix. Additionally, a zonal system with 1176 zones was constructed for the city, including the definition of its access links and associated distances. Our results shows that, ceteris paribus, zones with high numbers of housing units have higher probabilities of being the origin of a morning peak trip. Likewise, health facilities, educational, residential, commercial, and offices centres have significant attraction powers during this period. In this sense, our model manages to capture the expected effects of land use on trip generation and attraction. This study has numerous policy implications, as the information obtained can be used to predict the impacts of changes in the public transport network (such as extending routes, relocating their stops, designing new routes or changing the fare structure). Further research is needed to improve the zonal inference formulation and origin–destination matrix estimation, mainly by including better cost measures, and dealing with survey and data limitations.