The impact of Low Emission Zones on particulate matter concentration and public health: A Comment

Malina and Scheffler estimated the impact of Low Emission Zones (LEZs). LEZ effects are small and bias control is of paramount importance. Based on our analyses we conclude that the point estimate of monetary health benefits calculated by Malina and Scheffler is probably too high and the uncertainty reported possibly too small.     

Assessment and prediction of the impact of road transport on ambient concentrations of particulate matter PM10

The main challenge facing the air quality management authorities in most cities is meeting the air quality limits and objectives in areas where road traffic is high. The difficulty and uncertainties associated with the estimation and prediction of the road traffic contribution to the overall air quality levels is the major contributing factor. In this paper, particulate matter (PM₁₀) data from 10 monitoring sites in London was investigated with a view to estimating and developing Artificial Neural Network models (ANN) for predicting the impact of the road traffic on the levels of PM₁₀ concentration in London. Twin studies in conjunction with bivariate polar plots were used to identify and estimate the contribution of road traffic and other sources of PM₁₀ at the monitoring sites. The road traffic was found to have contributed between 24% and 62% of the hourly average roadside PM₁₀ concentrations. The ANN models performed well in predicting the road contributions with their R-values ranging between 0.6 and 0.9, FAC2 between 0.6 and 0.95, and the normalised mean bias between 0.01 and 0.11. The hourly emission rates of the vehicles were found to be the most contributing input variables to the outputs of the ANN models followed by background PM₁₀, gaseous pollutants and meteorological variables respectively.     

Atmospheric impact of ship traffic in four Adriatic-Ionian port-cities: Comparison and harmonization of different approaches

Shipping is a growing transport sector representing a relevant share of atmospheric pollutant emissions at global scale. In the Mediterranean Sea, shipping affects air quality of coastal urban areas with potential hazardous effects on both human health and climate. The high number of different approaches for investigating this aspect limits the comparability of results. Furthermore, limited information regarding the inter-annual trends of shipping impacts is available. In this work, an approach integrating emission inventory, numerical modelling (WRF-CAMx modelling system), and experimental measurements at high and low temporal resolution is used to investigate air quality shipping impact in the Adriatic/Ionian area focusing on four port-cities: Brindisi and Venice (Italy), Patras (Greece), and Rijeka (Croatia). Results showed shipping emissions of particulate matter (PM) and NOx comparable to road traffic emissions at all port-cities, with larger contributions to local SO₂ emissions. Contributions to PM_2.5 ranged between 0.5% (Rijeka) and 7.4% (Brindisi), those to PM₁₀ were between 0.3% (Rijeka) and 5.8% (Brindisi). Contributions to particle number concentration (PNC) showed an impact 2–4 times larger with respect to that on mass concentrations. Shipping impact on gaseous pollutants are larger than those to PM. The contribution to total polycyclic aromatic hydrocarbon (PAHs) concentrations was 82% in Venice and 56% in Brindisi, with a different partition gas-particle because of different meteorological conditions. The inter-annual trends analysis showed the primary contribution to PM concentrations decreasing, due to the implementation of the European legislation on the use of low-sulphur content fuels. This effect was not present on other pollutants like PAHs.     

Traffic control oriented impact on the persistence of urban air pollutants: A causeway bay revelation during emergency period

The continuous traffic flow is always considered to take a great extent responsibility for the air quality deterioration in urban areas. Meanwhile, traffic control is assumed to be one of the most effective ways to mitigate the high concentration situation as this may cut off the emission directly and satisfy the air quality objectives. Unfortunately, the overdevelopment of central business district area in megacities not only complicates the control plan, but also troubles the process of plan assessment. Because of the road blockages caused by the radical behavior during the Hong Kong protest in 2014, it offers an unexpected chance to evaluate the influence of traffic control oriented plan on urban (i.e., Causeway Bay) air pollution. Hence, we here investigated the six air pollutants concentrations that measured in the time series before, during and after the Hong Kong Protest period. The impact of traffic flow restriction on pollutants’ persistence has been quantified both qualitatively and quantitatively in this study. The results showed that the persistence of pollutants was a general property in Causeway Bay which dominated by the traffic flow pattern. The road blockages, considered as one kind of extreme traffic control plan, would strengthen the persistence of most pollutants (except ozone). Moreover, it also indicated that comprehensive consideration and further balance among different pollutants were necessary when try to reduce pollution in urban area by traffic control.     

The contribution of road traffic to particulate matter and metals in air pollution in the vicinity of an urban road

A detailed investigation was conducted to study the sources of particulate matter in the vicinity of an urban road in Žilina. To determine the amount of particulate matter (PM₁₀, PM_2.5 and PM₁) present in the ambient air, a reference gravimetric method was used. The main objective of this contribution was to identify the sources of these particles by means of statistical methods, specifically principal component analysis (PCA), factor analysis (FA), and absolute principal component scores (APCS), as well as using the presence of 17 metals in the particulate matter (Na, Mg, Al, Ca, V, Cr, Fe, Mn, Ni, Cu, Zn, As, Mo, Sb, Cd, Ba, Pb). To identify the metals in the particulate matter samples and to determine their abundances, spectroscopic methods were used, specifically inductively coupled plasma mass spectrometry (ICP-MS). Each of these metals may come from a specific source, such as the burning of fossil fuels in fossil fuel power plants; local heating of households; the burning of liquefied fossil fuels in the combustion engines of vehicles; the burning of coal and wood; non-combustion related emissions resulting from vehicular traffic; resuspension of traffic-related dust; and industry. Diesel vehicles and non-combustion emissions from road traffic have been identified as two key sources of the particulate matter. The results reveal that non-combustion emissions, which are associated with the elements Na, Fe, Mn, Ni, Zn, Mo, Sb, Cd, and Pb, are the major contributors, followed by combustion emissions from diesel vehicles, which are associated with the elements Mg, Ca, and Ba.     

Characteristics of particulate matter (PM) concentrations influenced by piston wind and train door opening in the Shanghai subway system

More than 9 million passengers take Shanghai’s subway system every work day. The system’s air quality has caused widespread concern because of the potential harm to passengers’ health. We measured the particulate matter (PM) concentrations at three kinds of typical underground platform (side-type, island-type, and stacked-type platforms) and inside the trains in Shanghai’s metro during 7 days of measurements in April and July 2015. Our results demonstrated that the patterns of air quality variation and PM concentrations were similar at the side-type and island-type platforms. We also found that the PM concentrations were higher on the platforms than inside the train and that the PM concentrations in the subway system were positively correlated with those in the ambient air. Piston wind generated by vehicle motion pushes air from the tunnel to the platform, so platform PM concentrations increase when trains approach the platform. However, the piston wind effect varies greatly between locations on the platform. In general, the effect of the piston wind is weaker at the middle of the platform than at both ends. PM concentrations inside the train increase after the doors open, during which time dirty platform air floods into the compartments. PM_1.0 and PM_2.5 were significantly correlated both inside the train and on the platforms. PM_1.0 accounted for 71.9% of PM_2.5 inside the train, which is higher than the corresponding platform values. Based on these results, we propose some practical suggestions to minimize air pollution damage to passengers and staff from the subway system.     

A combined assessment of air and noise pollution on the High Line,New York City

The High Line is an elevated public park in New York City, transformed from an unused freight rail line. Pedestrians walking through Manhattan’s West Side can walk either on the High Line or on a footpath below. Using Manhattan as a laboratory, this paper offers a combined assessment of noise and particulate matter pollution for its pedestrians. Noise and PM_2.5 levels were recorded simultaneously for two cases (i) pedestrians walking on a footpath alongside road traffic and (ii) pedestrians walking on the elevated High Line. Testing took places over three days in autumn 2014. Results were analysed to investigate if pedestrians using the High Line would have a lower pollution exposure to those using the footpath below. Results showed statistically significant differences between the upper and lower levels in exposure to both pollution types. In order to quantify the overall impact, results are expressed through a combined air–noise pollution index. This index indicates that the average reduction in PM_2.5 and noise pollution along the High Line compared to the footpath below is approximately 37%.     

The impact of transport pricing policy on individual energy consumption: a modeling case study in Kumamoto

To investigate the impact of traffic pricing policies on energy consumption, this study shows a microeconomic quantitative analysis scheme to simulate individual consumption behaviors from a microeconomic viewpoint. Energy consumption is estimated based on individual demand of non‐mobility goods and mobility goods under nine policy scenarios based on strategies of gasoline tax adding and mass transit fare reduction independently or combined. Results show that gasoline tax adding has strong effects on consumption behaviors. Energy consumption reduces mostly because of less consumption of non‐mobility goods and car trips. However, policy of mass transit fare reduction has limited impact on energy saving because consumption of non‐mobility goods and mass transit trips increases, but the number of car trips decline by only a small percentage. Comparing with single‐type policy, policies that combined gasoline tax adding and mass transit fare reduction show less energy consumption. Findings suggest that policies that increase cost of car trips, such as gasoline tax adding, are very helpful to reduce the consumption of non‐mobility goods and car trips, which contribute to less energy consumption. However, reducing cost of mass transit trips suggests limited effect on energy saving. Copyright © 2015 John Wiley & Sons, Ltd.     

The impact of road grade on carbon dioxide (CO2) emission of a passenger vehicle in real-world driving

To accurately estimate real-world vehicle emission at 1 Hz the road grade for each second of data must be quantified. Failure to incorporate road grade can result in over or underestimation of a vehicle’s power output and hence cause inaccuracy in the instantaneous emission estimate. This study proposes a simple LiDAR (Light Detection And Ranging) – GIS (Geographic Information System) road grade estimation methodology, using GIS software to interpolate the elevation for each second of data from a Digital Terrain Map (DTM). On-road carbon dioxide (CO₂) emissions from a passenger car were recorded by Portable Emission Measurement System (PEMS) over 48 test laps through an urban-traffic network. The test lap was divided into 8 sections for micro-scale analysis. The PHEM instantaneous emission model (Hausberger, 2003) was employed to estimate the total CO₂ emission through each lap and section. The addition of the LiDAR-GIS road grade to the PHEM modelling improved the accuracy of the CO₂ emission predictions. The average PHEM estimate (with road grade) of the PEMS measured section total CO₂ emission (n = 288) was 93%, with 90% of the PHEM estimates between 80% and 110% of the PEMS recorded value. The research suggests that instantaneous emission modelling with LiDAR-GIS calculated road grade is a viable method for generating accurate real-world micro-scale CO₂ emission estimates. The sensitivity of the CO₂ emission predictions to road grade was also tested by lessening and exaggerating the gradient profiles, and demonstrates that assuming a flat profile could cause considerable error in real-world CO₂ emission estimation.     

The longer and heavier vehicle debate: A review of empirical evidence from Germany

This paper aims to evaluate the likely effects of the adoption of Longer Heavier Vehicles (LHVs) from the perspective of logistics service providers (LSPs). The research consists of six case studies and a survey of companies which were involved LHV trials in Germany. Wider introduction of LHVs is being increasingly demanded so that road freight transport can better serve and support modern supply chains whilst achieving the desired eco-efficiency advancements. Available literature on LHVs puts a particular emphasis on five factors that need to be included in the assessment of their impact: energy efficiency, CO₂ emissions, costs, safety and infrastructure. The research provides an original and innovative empirical study refining and validating the current conceptual framework for assessing LHVs demonstrating it is a valuable tool and providing evidence that the vast majority of companies participating in our study, regardless of their size, were interested in the adoption of LHVs. However, it should be noted that a key limitation of the research is that by focusing on a single country case, the nature and scale of the findings may not reflect practice in other countries and sectors. There is also a need to examine the long-term sustainability of the improvements made.     

The effect of contract renewal and competitive tendering on public transport costs,subsidies and ridership

In this paper, we aim to estimate the effect of contract renewal as well as competitive tendering on public transport costs, subsidies, and ridership. More specifically, we examine to what extent (multiple) contract renewals and introduction of competitive tendering for long-term public transport contracts affect ridership, operational costs and subsidies in concession areas governed by public transportation authorities from 2001 until 2013 in the Netherlands. Our identification strategy improves on the literature as we are able to control for all time-invariant unobserved factors, such as network and area characteristics by using panel data. We show that when renewing long-term contracts, operational costs are reduced by at least 10%, whereas subsidies fall even stronger. For contracts that are renewed at least twice, the reduction in costs is even more substantial and in the order of 16%. We find that the effect of competitive tendering is completely absent, suggesting that the threat of competitive tendering is sufficient in a market where the majority of concessions is competitive tendered. Contract renewal not only reduces costs and subsidies, but simultaneously increases public transport ridership by 7.7%. Furthermore the vehicle-hours elasticity of operational costs is 0.40, pointing to strong economies of density. The geographical scale elasticity of operational costs is around one, which indicates constant returns to scale with respect to the geographical size of the concession area. This suggest that the current size of the Dutch concession area is optimal with respect to costs.     

The effects of planned and unplanned transfers on public transport users' perception of transfer routes

Many authorities are investing in new infrastructure to improve the quality of public transport (PT) services in the hope to increase mode switch from cars. The goal is to provide users with an integrated multimodal PT network by facilitating transfers. There exists a lack in the clarity of the attributes which defines a planned transfer and the effects of planned transfers on users' willingness to use routes with transfers. The present study provides approximate effects of ‘planned’ and ‘unplanned’ transfers on PT users' decisions to use transfer routes. The study focuses on two attributes of ‘planned’ transfers, integrated physical connection of transfers and information integration. A user preference survey was undertaken in Auckland, New Zealand. Analysis of the results shows that physical integration is more important than information integration for current PT users. Results also suggest that information integration has a greater influence on users of transfer services which are more closely aligned to being ‘unplanned’.     

Six years of CO2-based tax incentives for new passenger cars in The Netherlands: Impacts on purchasing behavior trends and CO2 effectiveness

There is growing evidence that consumers respond more effectively to upfront price signals, such as vehicle purchase taxes and feebate policies, and to tax incentives that are more salient than others, such as company car taxes graded by CO₂ emissions. This paper examines tax changes in The Netherlands, which are among the most stringent and most salient in Europe, and assesses the ex-post purchasing impacts and CO₂ effectiveness of six years of CO₂-based tax incentives for low-carbon cars in The Netherlands. Dutch tax incentives resulted in 13 g/km, or 11% lower average CO₂ emissions in 2013. The Netherlands has moved from the 12th position before the tax changes in 2007 to become Europe’s number one in terms of the lowest average new car CO₂ emissions and highest share of electric vehicles in 2013. Tax incentives for new cars sold between 2008 and 2013 have resulted in 4.6 million tons of potential lifetime CO₂ abatement at the cost of a drop in tax revenues of 30–50%. However, when corrected for the Dutch policy-induced increasing real-world fuel-economy shortfall and leakage of carbon reduction potential through vehicle export of low-carbon cars, only 3.5 million tons or 75% of the CO₂ reduction remains. CO₂-based tax incentives for company cars seem to have contributed the most to the observed turnaround in purchasing behavior towards lower CO₂-emitting passenger cars.     

The impact of alternative routeing and packaging scenarios on carbon and sulphate emissions in international wine distribution

There is a large body of research related to carbon footprint reduction in supply chains and logistics from a wide range of sectors; however the decarbonisation of freight transport is mostly explored from a single mode perspective and at a domestic/regional level. This paper takes into account a range of alternative transport modes, routes and methods with particular reference to UK wine imports from two regions: northern Italy and Southeast Australia. The research examines supply chain structures, costs and the environmental impact of international wine distribution to the UK. A number of options are evaluated to calculate the carbon footprint and sulphate emissions of alternative route, mode, method of carriage, and packaging combinations. The estimation of CO₂e emissions incorporates three main elements - cargo mass, distance and method of carriage; sulphate emissions are derived from actual ship routes, engine power and operational speeds. The bottling of wine either at source or close to destination is also taken into consideration. The key findings are: there are major differences between the environmental footprint of different routeing and packaging scenarios; the international shipping leg almost always has a much larger footprint than inland transport within the UK except in the hypothetical case of the rail shipments from Italy using flexitanks. With reference to sulphate, the lowest cost scenario among the sea maximizing options is also the sulphate minimising solution.     

The impact of high-speed rail investment on economic and environmental change in China: A dynamic CGE analysis

This study investigates the impact of high-speed rail investment on the economy and environment in China using a computable general equilibrium (CGE) model. The analysis is implemented in a dynamic recursive framework capturing long-run capital accumulation and labor market equilibrium. A national level impact was simulated through direct impact drivers including land use conversion, output expansion, cost reduction, productivity increase, transport demand substitution and induced demand. The results suggest that rail investment in China over the past decade has been a positive stimulus to the economy, while the effect on CO₂ emissions generation has been large. Overall, the economic impacts of rail investment are achieved primarily through induced demand and output expansion, whereas the contribution from a reduction of rail transportation costs and rail productivity increases were modest. In addition, negligible negative impacts were found from land use for rail development and the substitution effect among other modes. Emissions reduction from substitution of rail for other modes was small and offset by output expansion due to lowered rail transport costs and induced demand.