The effect of non-recreational transport cycling on use of other transport modes: A cross-sectional on-line survey

Accurate modelling of the health and environmental benefits of non-recreational transport cycling requires information about its effects on the use of other transport modes. Relevant research has not focussed on cycling for transport in a general context (as opposed to bikeshare), nor allowed for multi-modal trips. The influence of trip- and personal-characteristics on whether cycling replaces car-driving have yet to be considered. The present study aimed to address these research gaps. An on-line cross-sectional survey was completed by 1525 Australians who cycle for transport at least once per week. For the most recent trip completed (at least partly) by bicycle participants provided trip distance, and percentage travelled by car, public transport (PT), and walking. They also provided the percentage travelled by each mode for the same trip before taking up transport cycling; and a hypothetical future trip when riding is not possible. Compared to the same trip before, fifty percent of recent trips reduced car use, and around 1/3 eliminated a 100%-car trip. Reduced car use was significantly less likely for trips under 7.5 km, commuting, females, respondents under 55, and regular cyclists. Reduced car use was less likely for respondents who started riding because it is flexible, and more likely for those who started riding to avoid parking. Car-use was reduced by an average of 6.2 km per trip, and each bicycle-km cycled replaced 0.5 car-km. Participants report that since taking up cycling, even when they cannot use their bike, they use cars less and use PT more compared to before they took up cycling. Results suggest that previous studies underestimated the extent to which transport cycling replaces car travel, and highlights trip types and population groups to target with cycling promotion strategies. Information about the per-trip and per-bicycle-km replacement of car, PT and walking may be used for more accurate estimation of the benefits of transport cycling than has hitherto been possible.     

The effects of physical activity on greenhouse gas emissions for common transport modes in European countries

This paper applies a life cycle methodology to estimate activity-related contributions of transport modes to GHG emissions. The methodology uses national input–output tables, environmental accounts, household budget data and nutritional data to derive food-sector GHG coefficients of consumption for ten European countries. The food energy requirements for each mode of transport are estimated taking account of the modal activity level and energy requirements. Typical national food energy-related emissions for walking, cycling, and driving ranged from 25.6 to 77.3 gCO₂-eq/pass.km, 10.4–31.4 gCO₂-eq/pass.km and 1.7–5.2 gCO₂-eq/pass.km; passenger transport was found to result in no food-related emissions above those for a resting individual. Emissions vary between countries depending on the emissions intensities of their energy sectors as well as food prices and average body weights. A life cycle assessment of modal emissions in the UK is undertaken using the food-energy emissions intensities estimated and car travel was found to have the highest emissions intensity, followed by bus, cycling and walking.     

Evaluation of eco-driving training for vehicle fuel use and emission reduction: A case study in Australia

This study evaluates effectiveness of driver education teaching greater fuel efficiency (Eco-Driving) in a real world setting in Australia. The driving behaviour, measured in fuel use (litres per 100 km of travel) of a sample of 1056 private drivers was monitored over seven months. 853 drivers received education in eco-driving techniques and 203 were monitored as a control group. A simple experimental design was applied comparing the pre and post training fuel use of the treated sample compared to a control sample. This study found the driver education led to a statistically significant reduction in fuel use of 4.6% or 0.51 litres per 100 km compared to the control group.     

Volume and GHG emissions of long-distance travelling by Western Europeans

It is generally recognised that long distance travelling accounts for a significant part of the mileage of person travel. However, estimates have been hardly made. The paper estimates volume and GHG emissions of long-distance travel by Western Europeans. The analysis is predominantly based on data of the DATELINE project, the only EU-wide survey on long-distance travelling, conducted in 2001 and 2002. Some studies demonstrate that DATELINE suffers from serious underreporting of journeys. We analysed the causes for underreporting and developed expansion factors that correct for that. These gave the opportunity to estimate long-distance travel volumes and related GHG emissions in 2001/2002. Next an update to 2013 is made using statistics on the development of tourist travel and patronage of long-distance modes. Defining long distance ⩾100 km crow-fly, the estimates per capita in the Western European countries in 2013 are 7.5 journeys (defined as round-trips), 8600 km, and 1300 kg greenhouse gasses. The estimated total GHG emissions of long-distance travelling is 520 megaton. In the Netherlands and Flanders, countries where data on short-distance travelling were available, long-distance travelling accounts for 45% of the mileage and nearly 50% of the GHG emissions of all person transport. Long-distance travelling is growing and is expected to continue to grow, particularly by air. The GHG emissions are expected to grow as well, though to a smaller extent. Because short-distance travelling is stagnating, the shares of long distance travelling in both mileage and GHG emissions are likely to increase.     

Capitalization of BRT network expansions effects into prices of non-expansion areas

A before and after hedonic model is used to determine the property value impacts on properties already served by the transit system caused by extensions to Bogotá’s bus rapid transit system. Asking prices of residential properties belonging to an intervention area (N = 1407 before, 1570 after) or a control area (N = 267 before, 732 after) and offered for sale between 2001 and 2006 are used to determine capitalization of the enhanced regional access provided by the extension. Properties offered during the year the extension was inaugurated and in subsequent years have asking prices that are between 13% and 14% higher than prices for properties in the control area, after adjusting for structural, neighborhood and regional accessibility characteristics of each property. Furthermore, the appreciation is similar for properties within 500 m and properties between 500 m and 1 km of the BRT.     

Effects of the 80 km/h and variable speed limits on air pollution in the metropolitan area of barcelona

In 2008 the regional government of Catalonia (Spain) reduced the maximum speed limit on several stretches of congested urban motorway in the Barcelona metropolitan area to 80 km/h, while in 2009 it introduced a variable speed system on other stretches of its metropolitan motorways. We use the differences-in-differences method, which enables a policy impact to be measured under specific conditions, to assess the impact of these policies on emissions of NO_x and PM₁₀. Empirical estimation indicate that reducing the speed limit to 80 km/h causes a 1.7–3.2% increase in NO_x and 5.3–5.9% in PM₁₀. By contrast, the variable speed policy reduced NO_x and PM₁₀ pollution by 7.7–17.1% and 14.5–17.3%. As such, a variable speed policy appears to be a more effective environmental policy than reducing the speed limit to a maximum of 80 km/h.     

Wireless charging in California: Range,recharge, and vehicle electrification

This research evaluated the potential for wireless dynamic charging (charging while moving) to address range and recharge issues of modern electric vehicles by considering travel to regional destinations in California. A 200-mile electric vehicle with a real range of 160 miles plus 40 miles reserve was assumed to be used by consumers in concert with static and dynamic charging as a strict substitute for gasoline vehicle travel. Different combinations of wireless charging power (20–120 kW) and vehicle range (100–300 miles) were evaluated. One of the results highlighted in the research indicated that travel between popular destinations could be accomplished with a 200-mile EV and a 40 kW dynamic wireless charging system at a cost of about $2.5 billion. System cost for a 200-mile EV could be reduced to less than $1 billion if wireless vehicle charging power levels were increased to 100 kW or greater. For vehicles consuming 138 kWh of dynamic energy per year on a 40 kW dynamic system, the capital cost of $2.5 billion plus yearly energy costs could be recouped over a 20-year period at an average cost to each vehicle owner of $512 per year at a volume of 300,000 vehicles or $168 per year at a volume of 1,000,000 vehicles. Cost comparisons of dynamic charging, increased battery capacity, and gasoline refueling were presented. Dynamic charging, coupled with strategic wayside static charging, was shown to be more cost effective to the consumer over a 10-year period than gasoline refueling at $2.50 or $4.00 per gallon. Notably, even at very low battery prices of $100 per kWh, the research showed that dynamic charging can be a more cost effective approach to extending range than increasing battery capacity.     

Estimation of nitrogen oxides emissions from petrol and diesel passenger cars by means of on-board monitoring: Effect of vehicle speed,vehicle technology,engine type on emission rates

NO_X emission rates of 13 petrol and 3 diesel passenger cars as a function of average speed from 10 to 120 km/h, emission class (pre-Euro 1 – Euro 5), engine type were investigated by on-board monitoring on roads and highways of St. Petersburg using a portative Testo XXL 300 gas analyzer. The highest level of NO_X emission 0.5–2.5 g/km was inherent to old pre-Euro 1 petrol cars without a catalytic converter. NO_X emissions rates of Euro 1 and Euro 2 petrol cars changed within 0.15–0.9 g/km, Euro 3 – 0.015–0.27 g/km, Euro 4 – 0.013–0.1 g/km, Euro 5 – 0.002–0.043 g/km. Euro 3 – Euro 4 petrol cars generally satisfied corresponding NO_X Emission Standards (ES), except cold-start period, Euro 5 petrol cars did not exceed ES. Warmed, stabilized engines of Euro 3 – Euro 5 petrol cars showed 5–10 times lower NO_X emission rates than corresponding ES in the range of speed from 20 to 90 km/h. NO_X emission rates of diesel Euro 3 and Euro 4 cars varied from 0.45 to 1.1 g/km and from 0.31 to 1.1 g/km, respectively. Two examined diesel Euro 3 and one Euro 4 passenger vehicles did not satisfy NO_X ES at real use. Euro 3 diesel cars showed 28.9 times higher NO_X emissions than Euro 3 petrol cars and Euro 4 diesel car demonstrated 17.6 times higher NO_X emissions than Euro 4 petrol cars at warmed and stabilized engine at a cruise speed ranging from 30 to 60 km/h.     

Inferring patterns in the multi-week activity sequences of public transport users

The public transport networks of dense cities such as London serve passengers with widely different travel patterns. In line with the diverse lives of urban dwellers, activities and journeys are combined within days and across days in diverse sequences. From personalized customer information, to improved travel demand models, understanding this type of heterogeneity among transit users is relevant to a number of applications core to public transport agencies’ function. In this study, passenger heterogeneity is investigated based on a longitudinal representation of each user’s multi-week activity sequence derived from smart card data. We propose a methodology leveraging this representation to identify clusters of users with similar activity sequence structure. The methodology is applied to a large sample (n = 33,026) from London’s public transport network, in which each passenger is represented by a continuous 4-week activity sequence. The application reveals 11 clusters, each characterized by a distinct sequence structure. Socio-demographic information available for a small sample of users (n = 1973) is combined to smart card transactions to analyze associations between the identified patterns and demographic attributes including passenger age, occupation, household composition and income, and vehicle ownership. The analysis reveals that significant connections exist between the demographic attributes of users and activity patterns identified exclusively from fare transactions.     

Ultrafine particle infiltration into passenger vehicles. Part II: Model analysis

Experimental studies showed that infiltration and passive ventilation are important air exchange mechanisms inside vehicles but previous mathematical models did not consider either one. In this study, we incorporated infiltration and passive ventilation to advance the existing mathematical models and evaluated how different transport mechanisms affect passenger exposures at increasing speeds. Infiltration was formulated using Bernoulli’s equation and passive ventilation was derived empirically. The new model describes ultrafine particle (UFP) and carbon dioxide (CO₂) transport for a wide range of driving speed under any ventilation conditions. Unlike statistical models, this mathematical model can also provide vehicle-specific and transport mechanism-specific information. The model predictions were in a good agreement with data collected from 10 different vehicle models with an average discrepancy of less than 16% for UFPs and less than 3% for CO₂. Under outdoor air (OA) mode, when the fan is off, the model simulation showed that the infiltration and passive ventilation can substantially increase the UFP I/O (in-cabin/on-road concentrations) ratio from 0.15 at 0 km/h to 0.57 at 130 km/h. At medium fan setting, mechanical ventilation dominates and UFP I/O stays at 0.58 regardless of driving speed. Under recirculation (RC) mode, infiltration increases and the RC-mode filtration only removed 44% and 69% of the infiltrated particles at the lowest and medium fan settings, respectively. Model simulations under OA mode show that infiltration starts to occur above 115 km/h with the lowest fan setting; whereas, medium and higher fan settings prevent infiltration up to 145 km/h.     

Would personal carbon trading reduce travel emissions more effectively than a carbon tax?

The application of personal carbon trading (PCT) to transport choices has recently been considered in the literature as a means of reducing CO₂ emissions. Its potential effectiveness in changing car travel behavior is compared to the conventional carbon tax (CT) by means of a stated preferences survey conducted among French drivers (N ∼ 300). We show evidence that PCT could effectively change travel behavior and hence reduce transport emissions from personal travel. There is however a definite reluctance to reduce car travel. We were unable to demonstrate any significant difference between the effectiveness of PCT and the CT with regard to changing travel behavior. However, in the experiment, the PCT scheme provided consistent results while this was not the case for the CT scheme. Further research is needed into the “social norm” conveyed by a personal emissions allowance.     

Dynamic travel time prediction using data clustering and genetic programming

The current state-of-practice for predicting travel times assumes that the speeds along the various roadway segments remain constant over the duration of the trip. This approach produces large prediction errors, especially when the segment speeds vary temporally. In this paper, we develop a data clustering and genetic programming approach for modeling and predicting the expected, lower, and upper bounds of dynamic travel times along freeways. The models obtained from the genetic programming approach are algebraic expressions that provide insights into the spatiotemporal interactions. The use of an algebraic equation also means that the approach is computationally efficient and suitable for real-time applications. Our algorithm is tested on a 37-mile freeway section encompassing several bottlenecks. The prediction error is demonstrated to be significantly lower than that produced by the instantaneous algorithm and the historical average averaged over seven weekdays (p-value <0.0001). Specifically, the proposed algorithm achieves more than a 25% and 76% reduction in the prediction error over the instantaneous and historical average, respectively on congested days. When bagging is used in addition to the genetic programming, the results show that the mean width of the travel time interval is less than 5 min for the 60–80 min trip.     

Can rail/sail compete with air travel to Cyprus? A comparison of emissions

Rail and sea voyage journeys to Cyprus from a variety of origins are constructed to derive the travel emissions and travel time per person to compare popular aviation routes. The hypothetical ‘slow travel’ routes are approximately eight to ten times longer than flying. Emissions are lower from certain origins by about 100 kg CO₂ per person per round trip under reasonably high occupancy conditions when compared to current direct air services. Emissions from the sea voyages are derived from a sample of 162 marine vessels using the energy efficiency design index for European ships running at 20 knots.     

The environmental effects of changing speed limits: A quantile regression approach

Two speed management policies were implemented in the metropolitan area of Barcelona aimed at reducing air pollution concentration levels. In 2008, the maximum speed limit was reduced to 80 km/h and, in 2009, a variable speed system was introduced on some metropolitan motorways. This paper evaluates whether such policies have been successful in promoting cleaner air, not only in terms of average pollutant levels but also during high and low pollution episodes. To do so, we use a quantile regression approach for fixed effect panel data, which allows us analyzing different scenarios (beyond the average levels). We find that the variable speed system improves air quality with regard to the two pollutants considered here, being most effective when nitrogen oxide levels are not too low and when particulate matter concentrations are below extremely high levels. However, reducing the maximum speed limit from 120/100 km/h to 80 km/h has no effect – or even a slightly increasing effect – on the two pollutants, depending on the pollution scenario.     

Using the built environment to oversample walk,transit, and bicycle travel

Characteristics of the built environment (BE) have been associated with walk, transit, and bicycle travel. These BE characteristics can be used by transportation researchers to oversample households from areas where walk, transit, or bicycle travel is more likely, resulting in more observations of these uncommon travel behaviors. Little guidance, however, is available on the effectiveness of such built environment oversampling strategies. This article presents measures that can be used to assess the effectiveness of BE oversampling strategies and inform future efforts to oversample households with uncommon travel behaviors. The measures are sensitivity and specificity, positive likelihood ratio (LR+), and positive predictive value (PPV). To illustrate these measures, they were calculated for 10 BE-defined oversampling strata applied post-hoc to a Seattle area household travel survey. Strata with an average block size of <10 acres within a ¼ mile of household residences held the single greatest potential for oversampling households that walk, use transit, and/or bicycle.     

An empirical assessment of the feasibility of battery electric vehicles for day-to-day driving

Driven by sustainability objectives, Australia like many nations in the developed world, is considering the option of battery electric vehicles (BEVs) as an alternative to conventional internal combustion engine vehicles (ICEVs). In addition to issues of capital and running costs, crucial questions remain over the specifications of such vehicles, particularly the required driving range, recharge time, re-charging infrastructure, performance, and other attributes that will be of importance to consumers. With this in mind, this paper assesses (hypothetically) the extent to which current car travel needs could be met by BEVs for a sample of motorists in Sydney assuming a home-based charging set-up, which is likely to be the primary option for early adopters of the technology. The approach uses five weeks of driving data recorded by GPS technology and builds up home-home tours to assess the distances between (in effect) charging possibilities. An energy consumption model based on characteristics of the vehicle, and the speeds recorded by the GPS is adapted to determine the charge used, while a battery recharge function is used to determine charging times based on the current battery level. Among the most pertinent findings are that over the five weeks, (i) BEVs with a range as low as 60 km and a simple home-charge set-up would be able to accommodate well over 90% of day-to-day driving, (ii) however the incidence of tours requiring out-of-home charging increases markedly for vehicles below 24 kWh (170 km range), (iii) recharge time in itself has little impact on the feasibility of BEVs because vehicles spend the majority of their time parked and (iv) effective range can be dramatically impacted by both how a vehicle is driven and use of electrical auxiliaries, and (v) while unsuitable for long, high-speed journeys without some external re-charging options, BEVs appear particularly suited for the majority of day-to-day city driving in big cities where average journey speeds of 34 km/h are close to optimal in terms of maximising vehicle range. The paper has implications for both policy-makers and auto manufacturers in breaking down some of the (perceived) barriers to greater uptake of BEVs in the future.     

The future mobility of the world population

On average a person spends 1.1 h per day traveling and devotes a predictable fraction of income to travel. We show that these time and money budgets are stable over space and time and can be used for projecting future levels of mobility and transport mode. The fixed travel money budget requires that mobility rises nearly in proportion with income. Covering greater distances within the same fixed travel time budget requires that travelers shift to faster modes of transport. The choice of future transport modes is also constrained by path dependence because transport infrastructures change only slowly. In addition, demand for low-speed public transport is partially determined by urban population densities and land-use characteristics. We present a model that incorporates these constraints, which we use for projecting traffic volume and the share of the major motorized modes of transport—automobiles, buses, trains and high speed transport (mainly aircraft)—for 11 regions and the world through 2050. We project that by 2050 the average world citizen will travel as many kilometers as the average West European in 1990. The average American's mobility will rise by a factor of 2.6 by 2050, to 58,000 km/year. The average Indian travels 6000 km/year by 2050, comparable with West European levels in the early 1970s. Today, world citizens move 23 billion km in total; by 2050 that figure grows to 105 billion.     

Electric vehicles in multi-vehicle households

The suitability of an electric vehicle of a given range to serve in place of a given conventional vehicle is not limited by the daily travel over distances within that that range, but rather by the occasional inconvenience of finding alternative transport for longer trips. While the frequency of this inconvenience can be computed from usage data, the willingness of individual users to accept that replacement depends on details of available transportation alternatives and their willingness to use them. The latter can be difficult to assess. Fortunately, 65% of US households have access to the most convenient alternative possible: a second car. In this paper we describe an analysis of prospective EV acceptance and travel electrification in two-car households in the Puget Sound region. We find that EVs with 60 miles of useful range could be acceptable (i.e. incur inconvenience no more than three days each year) to nearly 90% of two-car households and electrify nearly 55% of travel in those households (32% of all travel). This compares to 120 miles range required to achieve the same fraction of electrified travel via one-for-one replacement of individual vehicles. Even though only one third of personal vehicles in the US may be replaced in this paradigm, the ‘EV as a second-car’ concept is attractive in that a significant fraction of travel can be electrified by vehicles with modest electric range and virtually no dependence on public charging infrastructure.