Integrating a simplified emission estimation model and mesoscopic dynamic traffic simulator to efficiently evaluate emission impacts of traffic management strategies

This paper presents a computationally efficient and theoretically rigorous dynamic traffic assignment (DTA) model and its solution algorithm for a number of emerging emissions and fuel consumption related applications that require both effective microscopic and macroscopic traffic stream representations. The proposed model embeds a consistent cross-resolution traffic state representation based on Newell’s simplified kinematic wave and linear car following models. Tightly coupled with a computationally efficient emission estimation package MOVES Lite, a mesoscopic simulation-based dynamic network loading framework DTALite is adapted to evaluate traffic dynamics and vehicle emission/fuel consumption impact of different traffic management strategies.     

Implications of driving style and road grade for accurate vehicle activity data and emissions estimates

Real-world vehicle operating mode data (2.5 million 1 Hz records), collected by instrumenting the vehicles of 82 volunteer drivers with OBD datalogger and GPS while they drove their routine travel routes, were analyzed to quantify vehicle emissions estimate errors due to road grade and driving style in rural, hilly Vermont. Data were collected in winter and summer for MY 1996 and newer passenger cars and trucks only. EPA MOVES2010b was used to estimate running exhaust emissions associated with measured vehicle activity. Changes in vehicle specific power (VSP) and MOVES operating mode (OpMode) due to proper accounting for real-world road grade indicated emission rate errors between 10% and 48%, depending on pollutant, chiefly because grade-related changes in VSP could shift activity by as many as six OpModes, depending on road type. The correct MOVES OpMode assignment was made only 33–55% of the time when road grade was not included in the VSP calculation. Driving style of individual drivers was difficult to assess due to unknown traffic operations data, but the largest differences between individual drivers were observed on rural restricted roads, where traffic conditions and control have minimal impact. The results suggest the importance of (1) measuring and incorporating real-world road grade in order to correctly assign MOVES emission rates; and (2) developing a driving style typology to account for differences in the MOVES emissions estimates due to driver variability.     

An integrated modeling approach for facilitating emission estimations of alternative fueled vehicles

This paper develops an integrated model for reliable estimation of daily vehicle fuel savings and emissions using an integrated traffic emission modeling approach created by incorporating the US Environmental Protection Agency’s vehicle emission model, MOVES, and the PARAMICS microscopic traffic simulation package. A case study is conducted to validate the model using a well-calibrated road network in Greenville, South Carolina. For each transportation fuel considered, both emission and fuel consumption impacts are evaluated based on market shares.     

Emission evaluation of inter-vehicle safety warning information systems

Driver inattentiveness is one of critical factors contributing to vehicle crashes. The inter-vehicle safety warning information system (ISWS) is a technology to enhance driver attentiveness by providing warning messages about upcoming hazards using connected vehicle environments. A novel feature of the proposed ISWS is its ability to detect hazardous driving events, such as abrupt accelerations and lane changes, which are defined as moving hazards with a higher potential of causing crashes. This study evaluated the effectiveness of the ISWS in reducing vehicle emissions and its potential for traffic congestion mitigation. This study included a field experiment that documented actual vehicle maneuvering patterns for abrupt accelerations and lane changes, which were used for more realistic simulation evaluations, in addition to normal accelerations and lane changes. Probe vehicles equipped with customized on-board units consisting of a global positioning system (GPS) device, accelerometer, and gyro sensor were used to obtain the vehicle maneuvering data. A microscopic simulator, VISSIM, was used to simulate a driver’s responsive behavior when warning messages were delivered. A motor vehicle emission simulator (MOVES) was then used to estimate vehicle emissions. The results show that reduction in vehicle emissions increased when the ISWS’s market penetration rate (MPR) and the congestion level of the traffic conditions increased. The maximum CO and CO₂ emission reductions achieved were approximately 6% and 7%, respectively, under LOS D traffic conditions. The outcomes of this study can be valuable for deriving smarter operational strategies for ISWS to account for environmental impacts.     

Sensitive analysis of emission rates in MOVES for developing site-specific emission database

With the rapid social and economic development, vehicle emissions have been identified as a major source of urban air pollutions in China. Therefore, the study on vehicle emission estimations is necessary. In light of the limitation of emission data for establishing a local comprehensive emission database, this paper analyzes the characteristics of emission rates in MOVES released by U.S. Environmental Protection Agency (EPA) to investigate the feasibility and to design a method for developing site-specific emission database. Sensitive analysis for model year, age group and speed interval is performed, and the regularity is concluded. The result shows that emission rates are almost constant with model year, but increase with age groups because of emission deterioration. With respect to speed intervals, the emission rates in 25–50 mph are higher than both those <25 mph and >50 mph in the same VSP (vehicle specific power) bins. In addition, an analysis of local emission data in Beijing is conducted to build the relationship between vehicle activities and emission rates. After that, a comparison of emission rates by VSP bins in MOVES and in local database is conducted in this study. The result shows that the absolute values are different because of regulatory emission standards, fuel quality, and other factors. However, the relative changes described by normalizing emission rates have a good consistency. Hence, the regularities of emission rates by VSP bins in MOVES can be used to develop local emission database in Beijing.     

Evaluation of vehicle acceleration models for emission estimation at an intersection

We evaluate the constant acceleration, linearly decreasing acceleration, and aaSIDRA models in terms of generating second-by-second speed profiles for emission estimations at an intersection. The models are first calibrated using field data from individual vehicle trajectories. With the calibrated models, second-by-second speed and acceleration data are produced, and emissions are estimated using MOVES. Emission estimations based on the calibrated acceleration models are then compared with those based on field trajectory data. The constant acceleration model tends to overestimate emissions; both the linearly decreasing acceleration model and the aaSIDRA model provide accurate emission estimations.     

Estimating fuel consumption and emissions based on reconstructed vehicle trajectories

Microscopic emission models are widely used in emission estimation and environment evaluation. Traditionally, microscopic traffic simulation models and probe vehicles are two sources of inputs to a microscopic emission model. However, they are not effective in reflecting all vehicles' real‐world operating conditions. Using each vehicle's spot speed data recorded by detectors, this paper provides a new method to estimate all vehicles' real‐world activities data. These data can then be used as inputs to a microscopic emission model to estimate vehicle fuel consumption and emissions. The main task is to reconstruct trajectory of each vehicle and calculate second‐by‐second speed and acceleration from the activities data. The Next Generation Simulation dataset and the Comprehensive Modal Emissions Model are used in this study to calculate and analyze the emission results for both lane‐level and link‐level. The results showed that using the proposed method for estimating vehicle fuel consumption and emissions is promising. Copyright © 2012 John Wiley & Sons, Ltd.     

Speed profile estimation using license plate recognition data

Vehicle speed profile is a fundamental data support for calculating vehicular emission using the micro-emission model. However, achieving accuracy and breadth for the speed profile estimation is difficult. This study proposes a new vehicle speed profile estimation model using license plate recognition (LPR) data. This model allows speed profile estimation of every individual vehicle between two consecutive intersections. A systematic LPR data-mending method is developed to infer the information of unmatched vehicles. Using the complete arrival and departure information as boundary conditions, a customized car-following model combined with dummy-overtaking hypothesis and boundary constraints is then applied to estimate the speed profile of vehicles. The proposed model is validated using ground truth speed information from a field experiment conducted in Langfang City in China. Results show that the model can fully capture the pattern of ground truth speed profile. A complementary model validation using the Next Generation Simulation dataset and a model application for calculating emissions are also conducted. The numerical results indicate the effectiveness of the proposed model in estimating vehicle speed profile and emissions.     

VISSIM/MOVES integration to investigate the effect of major key parameters on CO2 emissions

This paper looks at CO₂ emissions on limited access highways in a microscopic and stochastic environment using an optimal design approach. Estimating vehicle emissions based on second-by-second vehicle operation allows the integration of a microscopic traffic simulation model with the latest US Environmental Protection Agency’s mobile source emissions model to improve accuracy. A factorial experiment on a test bed prototype of the I-4 urban limited access highway corridor located in Orlando, Florida was conducted to identify the optimal settings for CO₂ emissions reduction and to develop a microscopic transportation emission prediction model. An exponentially decaying function towards a limiting value expressed in the freeway capacity is found to correlate with CO₂ emission rates. Moreover, speeds between 55 and 60 mph show emission rate reduction effect while maintaining up to 90% of the freeway’s capacity. The results show that speed has a significant impact on CO₂ emissions when detailed and microscopic analysis of vehicle operations of acceleration and deceleration are considered.     

Does winter road maintenance help reduce air emissions and fuel consumption?

Winter road maintenance (WRM) has been shown to have significant benefits of improving road safety and reducing traffic delay caused by adverse weather conditions. It has also been suggested that WRM is also beneficial in terms of reducing vehicular air emissions and fuel consumptions because snow and ice on road surface often cause the drivers to reduce their vehicle speeds or to switch to high gears, thus decreasing fuel combustion efficiency. However, there has been very limited information about the underlying relationship, which is important for quantifying this particular benefit of a winter road maintenance program. This research is focused on establishing a quantitative relationship between winter road surface conditions and vehicular air emissions. Speed distribution models are developed for the selected Ontario highways using data from 22 road sites across the province of Ontario, Canada. The vehicular air emissions under different road surface conditions are calculated by coupling the speed models with the engine emission models integrated in the emission estimation model - MOVES. It was found that, on the average, a 10% improvement in road surface conditions could result in approximately 0.6–2% reduction in air emissions. Application of the proposed methodology is demonstrated through a case study to analyse the air emission and energy consumption effects under specific weather events.     

On a pathway to de-carbonization – A comparison of new passenger car CO2 emission standards and taxation measures in the G20 countries

Considering the role of transport for a 1.5 Degree stabilization pathway and the importance of light-duty vehicle fuel efficiency within that, it is important to understand the key elements of a policy package to shape the energy efficiency of the vehicle fleet. This paper presents an analysis focusing on three types of policy measures: (1) CO₂ emission standards for new vehicles, (2) vehicle taxation directly and indirectly based on CO₂ emission levels, and (3) fuel taxation. The paper compares the policies in the G20 economies and estimates the financial impact of those policies using the example of a Ford Focus vehicle model. This analysis is a contribution to the assessment of the role of the transport sector in global decarbonisation efforts. The findings of this paper show that only an integrated approach of regulatory and fiscal policy measures can yield substantial efficiency gains in the vehicle fleet and can curb vehicle kilometres travelled by individual motorised transport. Using the illustrative example of one vehicle model, the case study analysis shows that isolated measures, e.g. fuel efficiency regulation without corresponding fuel and vehicle taxes only have minor CO₂ emission reduction effects and that policy measures need to be combined in order to achieve substantial emission reduction gains over time. The analysis shows that the highest level of impact is achieved by a combination regulatory and fiscal policies rather than only one policy even if this policy is more aggressive. When estimating the quantitative effect of fuel efficiency standards, vehicle and fuel tax, the analysis shows that substantial gains with regard to CO₂ emission are only achieved at a financial impact level above 500 Euros over a four year period.     

The significant impacts on traffic and emissions of ferrying children to school in Beijing

After having implemented numerous regulations, e.g., coercive policies on vehicle use and purchase, it is becoming increasingly difficult to find further potential to control vehicle emissions in Beijing, as the air quality is still poor. This research provides a different approach for policy-makers to reduce vehicle emissions by managing demand. We found that parents ferrying their children to and from school is an important but long-neglected contributor to traffic congestion and vehicle emissions. This phenomenon is very common in China because of the social culture. In this research, parallel tests during both the school season and the non-school season were adopted, and emissions in both seasons were calculated based on travel demand and emission models. The results revealed that emissions factors (in g/km) for criteria pollutants and CO₂ increased by over 10% during rush hours during the school season due to traffic condition deterioration compared with non-school season. Daily HC, CO, NO_x, PM and CO₂ emissions from the passenger car fleet were 8.3%, 7.8%, 6.4%, 6.3% and 6.5% higher compared with those during the non-school season, respectively. These differences are greater than the total vehicular emission reduction by other control measures in 2014 in Beijing. For policy makers, providing safe and efficient ways to ferry children would be a useful and harmonious strategy for future vehicle emission control.     

A field evaluation case study of the environmental and energy impacts of traffic calming

This study quantifies the energy and environmental impact of a selection of traffic calming measures using a combination of second-by-second floating-car global positioning system data and microscopic energy and emission models. It finds that traffic calming may result in negative impacts on vehicle fuel consumption and emission rates if drivers exert aggressive acceleration levels to speed up to their journeys. Consequently by eliminating sharp acceleration maneuvers significant savings in vehicle fuel consumption and emission rates are achievable through driver education. The study also demonstrates that high emitting vehicles produce CO emissions that are up to 25 times higher than normal vehicle emission levels while low emitting vehicles produce emissions that are 15–35% of normal vehicles. The relative increases in vehicle fuel consumption and emission levels associated with the sample traffic calming measures are consistent and similar for normal, low, and high emitting vehicles.     

Prediction of vehicle CO2 emission and its application to eco-routing navigation

Transportation sector accounts for a large proportion of global greenhouse gas and toxic pollutant emissions. Even though alternative fuel vehicles such as all-electric vehicles will be the best solution in the future, mitigating emissions by existing gasoline vehicles is an alternative countermeasure in the near term. The aim of this study is to predict the vehicle CO₂ emission per kilometer and determine an eco-friendly path that results in minimum CO₂ emissions while satisfying travel time budget. The vehicle CO₂ emission model is derived based on the theory of vehicle dynamics. Particularly, the difficult-to-measure variables are substituted by parameters to be estimated. The model parameters can be estimated by using the current probe vehicle systems. An eco-routing approach combining the weighting method and k-shortest path algorithm is developed to find the optimal path along the Pareto frontier. The vehicle CO₂ emission model and eco-routing approach are validated in a large-scale transportation network in Toyota city, Japan. The relative importance analysis indicates that the average speed has the largest impact on vehicle CO₂ emission. Specifically, the benefit trade-off between CO₂ emission reduction and the travel time buffer is discussed by carrying out sensitivity analysis in a network-wide scale. It is found that the average reduction in CO₂ emissions achieved by the eco-friendly path reaches a maximum of around 11% when the travel time buffer is set to around 10%.     

Analysis of telecommuting behavior and impacts on travel demand and the environment

The discussion of whether, and to what extent, telecommuting can curb congestion in urban areas has spanned more than three decades. This study develops an integrated framework to provide the empirical evidence of the potential impacts of home-based telecommuting on travel behavior, network congestion, and air quality. In the first step, we estimate a telecommuting adoption model using a zero-inflated hierarchical ordered probit model to determine the factors associated with workers’ propensity to adopt telecommuting. Second, we implement the estimated model in the POLARIS activity-based framework to simulate the potential changes in workers’ activity-travel patterns and network congestion. Third, the MOVES mobile source emission simulator and Autonomie vehicle energy simulator are used to estimate the potential changes in vehicular emissions and fuel use in the network as a result of this policy. Different policy adoption scenarios are then tested in the proposed integrated platform. We found that compared to the current baseline situation where almost 12% of workers in Chicago region have flexible working time schedule, in the case when 50% of workers have flexible working time, telecommuting can reduce total daily vehicle miles traveled (VMT) and vehicle hours traveled (VHT) up to 0.69% and 2.09%, respectively. Considering the same comparison settings, this policy has the potential to reduce greenhouse gas and particulate matter emissions by up to 0.71% and 1.14%, respectively. In summary, our results endorse the fact that telecommuting policy has the potential to reduce network congestion and vehicular emissions specifically during rush hours.     

Designing Emission Charging Schemes for Transportation Conformity

This paper designs emission charging schemes to ensure traffic emissions not exceeding the emission budgets in emission regulation areas. In a network where all links are tollable, we prove that, under mild conditions, there exists a non‐negative link‐based toll scheme that achieves the transportation conformity requirement while minimizing total emissions. We further consider only tolling in the emission regulation areas and formulate a model to determine optimal area‐based emission charges to ensure the conformity. The model is formulated as a mathematical program with complementarity constraints. A solution framework is developed to solve the model, leveraging on a derivative‐free pattern search algorithm and integrating MOVES to estimate vehicular emissions more accurately. The proposed models are demonstrated on two numerical examples. Copyright © 2013 John Wiley & Sons, Ltd.     

Modeling risks and uncertainties in residents’ license choice behaviors under a vehicle restriction policy

Understanding residents’ perception and reaction to vehicle restriction policies is significant for transportation management. However, few studies have examined it from a behavioral and disaggregated perspective, particularly from people’s responses to uncertainties in choices, and their consequent behaviors under potential risks. This paper proposes a multi-level nested logit method to model sequential choice behaviors considering uncertainties under a vehicle license restriction policy. Prospect theory is applied, where a novel reference point is proposed based on instances of ‘whether a risk happens’ rather than a hard number which is difficult to obtain in reality. A case study in Guangzhou, China is presented, where a vehicle restriction policy has been applied for three years. Residents’ attitudes and preferences under uncertainties and different risks are revealed, and these factors are significant in predicting people’s future decisions while policy changes.     

GHG-emission models for assessing the eco-friendliness of road and rail freight transports

Intermodal rail/road transportation is an instrument of green logistics, which may help reducing transport related greenhouse gas (GHG) emissions. In order to assess the environmental impact of road and rail transports, researchers have formulated very detailed microscopic models, which determine vehicle emissions precisely based on a vast number of parameters. They also developed macroscopic models, which estimate emissions more roughly from few parameters that are considered most influential. One of the goals of this paper is to develop mesoscopic models that combine the preciseness of micro-models while requiring only little more information than macro-models. We propose emission models designed for transport planning purposes which are simple to calibrate by transport managers. Despite their compactness, our models are able to reflect the influence of various traffic conditions on a transport’s total emissions. Furthermore, contrasting most papers considering either the road or the rail mode, we provide models on a common basis for both modes of transportation. We validate our models using popular micro- and macroscopic models and we apply them to artificial and real world transport scenarios to identify under which circumstances intermodal transports actually effect lower emissions. We find that travel speed and country-specific energy emission factors influence the eco-friendliness of intermodal transports most severely. Hence, the particular route chosen for a transnational intermodal transport is an important but so far neglected option for eco-friendly transportation.     

Towards a real-time microscopic emissions model

This article presents a new approach to microscopic road traffic exhaust emission modelling. The model described uses data from the SCOOT demand-responsive traffic control system implemented in over 170 cities across the world. Estimates of vehicle speed and classification are made using data from inductive detector loops located on every SCOOT link. This data feeds into a microscopic traffic model to enable enhanced modelling of the driving modes of vehicles (acceleration, deceleration, idling and cruising). Estimates of carbon monoxide emissions are made by applying emission factors from an extensive literature review. A critical appraisal of the development and validation of the model is given before the model is applied to a study of the impact of high emitting vehicles. The article concludes with a discussion of the requirements for the future development and benefits of the application of such a model.     

Development of a microscopic activity-based framework for analyzing the potential impacts of transportation control measures on vehicle emissions

The 1990 Clean Air Act Amendments (CAAA) and the Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) have defined a set of transportation control measures to counter the increase in the vehicle emissions and energy consumption due to increased travel. The value of these TCM strategies is unknown as there is limited data available to measure the travel effects of individual TCM strategies and the models are inadequate in forecasting changes in travel behavior resulting from these strategies. The work described in this paper begins to provide an operational methodology to overcome these difficulties so that the impacts of the policy mandates of both CAAA and ISTEA can be assessed. Although the framework, as currently developed, falls well short of actually forecasting changes in traveler behavior relative to policy options designed to encourage emissions reduction, the approach can be useful in estimating upper bounds of certain policy alternatives in reducing vehicle emissions. Subject to this important limitation, the potential of transportation policy options to alleviate vehicle emissions is examined in a comprehensive activity-based approach. Conclusions are drawn relative to the potential emissions savings that can be expected from efficient trip chaining behavior, ridesharing among household members, as well as from technological advances in vehicle emissions control devices represented by replacing all of the vehicles in the fleet by vehicles conforming to present-day emissions technology.