A comparative study on data segregation for mesoscopic energy modeling

On-road vehicles have been considered as one of the major contributors to energy consumption and air pollutant emissions. In order to quantify the corresponding environmental impacts, great efforts have been dedicated to the microscopic and macroscopic modeling for vehicle energy consumption and emissions. However, the mesoscopic modeling research that is focused on estimating trip-based energy consumption and is critical to some ITS applications (e.g., environmentally-friendly navigation), is relatively deficient. This study aims to investigate the effects of different data segregation methods on the mesoscopic modeling for vehicle energy consumption. A variety of novel methods, including the so-called conditional operating mode based method, have been proposed and evaluated using field data. Based on real-world data, statistical analyses have demonstrated the superior performance of enhanced models (i.e., conditional operating mode/VSP based models) in estimating vehicle energy consumption on a trip basis, compared to the other four models (velocity binning, time snipping, distance snipping and VSP based models) tested in this study.     

An activity-episode generation model that captures interactions between household heads: development and empirical analysis

In this paper, we develop an approach for modeling the daily number of non-work, out-of-home activity episodes for household heads that incorporates in its framework both interactions between such members and activity setting (i.e. independent and joint activities). Trivariate ordered probit models are estimated for the heads of three household types – couple, non-worker; couple, one-worker; and couple, two-worker households – using data from a trip diary survey that was conducted in the Greater Toronto Area (GTA) during 1987. Significant interactions between household heads are found. Moreover, the nature of these interactions is shown to vary by household type implying that decision-making structures and, more generally, household dynamics also vary by household type. In terms of predictive ability, the models incorporating interactions are found to predict more accurately than models excluding interactions. The empirical findings emphasize the importance of incorporating interactions between household members in activity-based forecasting models.     

Stochastic frontier estimation of budgets for Kuhn–Tucker demand systems: Application to activity time-use analysis

We propose a stochastic frontier approach to estimate budgets for the multiple discrete–continuous extreme value (MDCEV) model. The approach is useful when the underlying time and/or money budgets driving a choice situation are unobserved, but the expenditures on the choice alternatives of interest are observed. Several MDCEV applications hitherto used the observed total expenditure on the choice alternatives as the budget to model expenditure allocation among choice alternatives. This does not allow for increases or decreases in the total expenditure due to changes in choice alternative-specific attributes, but only allows a reallocation of the observed total expenditure among different alternatives. The stochastic frontier approach helps address this issue by invoking the notion that consumers operate under latent budgets that can be conceived (and modeled) as the maximum possible expenditure they are willing to incur. The proposed method is applied to analyze the daily out-of-home activity participation and time-use patterns in a survey sample of non-working adults in Florida. First, a stochastic frontier regression is performed on the observed out-of-home activity time expenditure (OH-ATE) to estimate the unobserved out-of-home activity time frontier (OH-ATF). The estimated frontier is interpreted as a subjective limit or maximum possible time individuals can allocate to out-of-home activities and used as the time budget governing out-of-home time-use choices in an MDCEV model. The efficacy of this approach is compared with other approaches for estimating time budgets for the MDCEV model, including: (a) a log-linear regression on the total observed expenditure for out-of-home activities and (b) arbitrarily assumed, constant time budgets for all individuals in the sample. A comparison of predictive accuracy in time-use patterns suggests that the stochastic frontier and log-linear regression approaches perform better than arbitrary assumptions on time budgets. Between the stochastic frontier and log-linear regression approaches, the former results in slightly better predictions of activity participation rates while the latter results in slightly better predictions of activity durations. A comparison of policy simulations demonstrates that the stochastic frontier approach allows for the total out-of-home activity time expenditure to either expand or shrink due to changes in alternative-specific attributes. The log-linear regression approach allows for changes in total time expenditure due to changes in decision-maker attributes, but not due to changes in alternative-specific attributes.     

A new estimation approach for the multiple discrete–continuous probit (MDCP) choice model

This paper develops a blueprint (complete with matrix notation) to apply Bhat’s (2011) Maximum Approximate Composite Marginal Likelihood (MACML) inference approach for the estimation of cross-sectional as well as panel multiple discrete–continuous probit (MDCP) models. A simulation exercise is undertaken to evaluate the ability of the proposed approach to recover parameters from a cross-sectional MDCP model. The results show that the MACML approach does very well in recovering parameters, as well as appears to accurately capture the curvature of the Hessian of the log-likelihood function. The paper also demonstrates the application of the proposed approach through a study of individuals’ recreational (i.e., long distance leisure) choice among alternative destination locations and the number of trips to each recreational destination location, using data drawn from the 2004 to 2005 Michigan statewide household travel survey.     

Analysis of road transportation energy consumption demand in China

In this paper, we first analyze the historical trends in road transportation energy consumption and GDP in developed economies to find out the development characteristics of road energy consumption. The two indexes present obvious ‘S’ type patterns. Then, in order to explore the current status and future trend of road energy transportation in China, we employ path analysis to analyze the impact mechanism of the factors related to road transportation energy consumption. Next, we adopt the BMA model to select the core factors related to road transportation energy consumption in China, and on the basis of the model selection as well as univariate (ETS & ARIMA models) and multivariate (multiple regression) models, the road transportation energy consumption is analyzed and forecast. The results showed that the road transportation energy consumption rises by 0.33 percent for every percent increase in GDP and by 1.26 percentage points for every percent increase in urbanization. The road transportation energy consumption in China is expected to reach around 226181.1 ktoe by the end of 2015, and about 347,363 ktoe by 2020.     

Modeling and forecasting household energy consumption and related CO2 emissions integrating UrbanSim and transportation models: an Atlanta BeltLine case study

Reducing energy consumption and controlling greenhouse gas emissions are key challenges for urban residents. Because urban areas are complex and dynamic, affected by many driving factors in terms of growth, development, and demographics, urban planners and policy makers need a sophisticated understanding of how residential lifestyle, transportation behavior, land-use changes, and land-use policies affect residential energy consumption and associated CO₂ emissions. This study presents an approach to modeling and simulating future household energy consumption and CO₂ emissions over a 30-year planning period, using an energy-consumption regression approach based on the UrbanSim model. Outputs from UrbanSim for a baseline scenario are compared with those from a no-transportation-demand model and an Atlanta BeltLine scenario. The results indicate that incorporation of a travel demand model can make the simulation more reasonable and that the BeltLine project holds potential for curbing energy consumption and CO₂ emissions.     

The impact of transport pricing policy on individual energy consumption: a modeling case study in Kumamoto

To investigate the impact of traffic pricing policies on energy consumption, this study shows a microeconomic quantitative analysis scheme to simulate individual consumption behaviors from a microeconomic viewpoint. Energy consumption is estimated based on individual demand of non‐mobility goods and mobility goods under nine policy scenarios based on strategies of gasoline tax adding and mass transit fare reduction independently or combined. Results show that gasoline tax adding has strong effects on consumption behaviors. Energy consumption reduces mostly because of less consumption of non‐mobility goods and car trips. However, policy of mass transit fare reduction has limited impact on energy saving because consumption of non‐mobility goods and mass transit trips increases, but the number of car trips decline by only a small percentage. Comparing with single‐type policy, policies that combined gasoline tax adding and mass transit fare reduction show less energy consumption. Findings suggest that policies that increase cost of car trips, such as gasoline tax adding, are very helpful to reduce the consumption of non‐mobility goods and car trips, which contribute to less energy consumption. However, reducing cost of mass transit trips suggests limited effect on energy saving. Copyright © 2015 John Wiley & Sons, Ltd.     

Modeling household interactions in daily in-home and out-of-home maintenance activity participation

The activity travel patterns of individuals in a household are inter-related, and the realistic modeling of activity-travel behavior requires that these interdependencies be explicitly accommodated. This paper examines household interactions impacting weekday in-home and out-of-home maintenance activity generation in active, nuclear family, households. The in-home maintenance activity generation is modeled by examining the duration invested by the male and female household heads in household chores using a seemingly unrelated regression modeling system. The out-of-home maintenance activity generation is modeled in terms of the decision of the household to undertake shopping, allocation of the task to one or both household heads, and the duration of shopping for the person(s) allocated the responsibility. A joint mixed-logit hazard-duration model structure is developed and applied to the modeling of out-of-home maintenance activity generation. The results indicate that traditional gender roles continue to exist and, in particular, non-working women are more likely to share a large burden of the household maintenance tasks. The model for out-of-home maintenance activity generation indicates that joint activity participation in the case of shopping is motivated by resource (automobiles) constraints. Finally, women who have a higher propensity to shop are also found to be inherently more efficient shoppers.     

Modeling the behavioral determinants of travel behavior: An application of latent transition analysis

This paper applies the relatively new method of latent class transition analysis to explore the notion that qualitative differences in travel behavior patterns are substantively meaningful and therefore relevant from explanatory point of view. For example, because the bicycle may function as an important access and egress mode, a car user who also (occasionally) uses the bicycle may be more likely to switch to a public transit profile than someone who only uses the car. Data from the Dutch mobility panel are used to inductively reveal travel behavior patterns and model transitions in these patterns over time. Additionally, the effects of seven exogenous variables, including two important life events (i.e. moving house and changing jobs), on cluster membership and the transition probabilities are assessed. The results show that multiple-mode users compared to single-mode users are more likely to switch from one behavioral profile to another. In addition, age, the residential environment, moving house and changing jobs have strong influences on the transition probabilities between the revealed behavioral patterns over time.     

The asymmetric income effect on household vehicle ownership in Taiwan: A threshold cointegration approach

This paper uses the asymmetric threshold cointegration test to examine the asymmetric relationship between household income and vehicle ownership in Taiwan, presenting estimated asymmetric error correction models. The empirical data include information on household income, car ownership and motorcycle ownership in different regions from 1974 to 2009. The results show that, first, motorcycle ownership is asymmetrically cointegrated with household income in each region, and car ownership is asymmetrically cointegrated with household income in all regions except Taipei city. Second, both car and motorcycle ownership levels increase faster than they decrease in the asymmetric adjustment of their long-run relationship. Third, sensitivity tests for the period 1987-2009 show that the cointegration relationship of the car ownership equations vanished. Finally, we find evidence on the effects of household income on motorcycle ownership, and the effects of income variables on car and motorcycle ownership are dissimilar. This study exhibits different results across regions. These findings may be related to the development of public transit system in each region.     

A comparative life-cycle energy and emissions analysis for intercity passenger transportation in the U.S. by aviation,intercity bus,and automobile

Intercity passenger trips constitute a significant source of energy consumption, greenhouse gas emissions, and criteria pollutant emissions. The most commonly used city-to-city modes in the United States include aircraft, intercity bus, and automobile. This study applies state-of-the-practice models to assess life-cycle fuel consumption and pollutant emissions for intercity trips via aircraft, intercity bus, and automobile. The analyses compare the fuel and emissions impacts of different travel mode scenarios for intercity trips ranging from 200 to 1600 km. Because these modes operate differently with respect to engine technology, fuel type, and vehicle capacity, the modeling techniques and modeling boundaries vary significantly across modes. For aviation systems, much of the energy and emissions are associated with auxiliary equipment activities, infrastructure power supply, and terminal activities, in addition to the vehicle operations between origin/destination. Furthermore, one should not ignore the embodied energy and initial emissions from the manufacturing of the vehicles, and the construction of airports, bus stations, highways and parking lots. Passenger loading factors and travel distances also significantly influence fuel and emissions results on a per-traveler basis. The results show intercity bus is generally the most fuel-efficient mode and produced the lowest per-passenger-trip emissions for the entire range of trip distances examined. Aviation is not a fuel-efficient mode for short trips (<500 km), primarily due to the large energy impacts associated with takeoff and landing, and to some extent from the emissions of ground support equipment associated with any trip distance. However, aviation is more energy efficient and produces less emissions per-passenger-trip than low-occupancy automobiles for trip distances longer than 700–800 km. This study will help inform policy makers and transportation system operators about how differently each intercity system perform across all activities, and provides a basis for future policies designed to encourage mode shifts by range of service. The estimation procedures used in this study can serve as a reference for future analyses of transportation scenarios.     

Transport energy consumption in mountainous roads. A comparative case study for internal combustion engines and electric vehicles in Andorra

This paper analyses transport energy consumption of conventional and electric vehicles in mountainous roads. A standard round trip in Andorra has been modelled in order to characterise vehicle dynamics in hilly regions. Two conventional diesel vehicles and their electric-equivalent models have been simulated and their performances have been compared. Six scenarios have been simulated to study the effects of factors such as orography, traffic congestion and driving style. The European fuel consumption and emissions test and Artemis urban driving cycles, representative of European driving cycles, have also been included in the comparative analysis. The results show that road grade has a major impact on fuel economy, although it affects consumption in different levels depending on the technology analysed. Electric vehicles are less affected by this factor as opposed to conventional vehicles, increasing the potential energy savings in a hypothetical electrification of the car fleet. However, electric vehicle range in mountainous terrains is lower compared to that estimated by manufacturers, a fact that could adversely affect a massive adoption of electric cars in the short term.     

Comparative analysis of the energy consumption and CO2 emissions of 40 electric,plug-in hybrid electric,hybrid electric and internal combustion engine vehicles

This paper analyses the results of the Royal Automobile Clubhallo’s 2011 RAC Future Car Challenge, an annual motoring challenge in which participants seek to consume the least energy possible while driving a 92 km route from Brighton to London in the UK. The results reveal that the vehicle’s power train type has the largest impact on energy consumption and emissions. The traction ratio, defined as the fraction of time spent on the accelerator in relation to the driving time, and the amount of regenerative braking have a significant effect on the individual energy consumption of vehicles. In contrast, the average speed does not have a great effect on a vehicles’ energy consumption in the range 25–70 km/h.     

Eco-driving key factors that influence fuel consumption in heavy-truck fleets: A Colombian case

This research identifies key variables that influence fuel consumption that might be improved through eco-driving training programs under three circumstances that have been scarcely studied before: (a) heavy- and medium-duty truck fleets, (b) long-distance freight transport, and (c) the Latin American region. Based on statistical analyses that include multivariate regression of operational variables on fuel consumption, the impacts of an eco-driving training campaign were measured by comparing ex ante and ex post data. Operational variables are grouped into driving errors, trip conditions, driver behavior, driver profile, and vehicle attributes.The methodology is applied in a freight fleet with nationwide transport operations located in Colombia, where the steepness of its roads plays an important role in fuel consumption. The fleet, composed of 18 trucks, is equipped with state-of-the-art real-time data logger systems. During four months, 517 trips traveling a total distance of 292,512 km and carrying a total of 10,034 tons were analyzed.The results show a baseline average fuel consumption (FC) of 1.716 liters per ton-100 km. A different logistics performance indicator, which measures FC in liters per ton transported each 100 km, shows an average of 3.115. After the eco-driving campaign, reductions of 6.8% and 5.5% were obtained. Drivers’ experience, driving errors, average speed, and weight-capacity ratio, among others, were found to be highly relevant to FC. In particular, driving errors such as acceleration, braking and speed excesses are the most sensitive to eco-driving training, showing reductions of up to 96% on the average number of events per trip.     

Gauging interventions for sustainable travel: A comparative study of travel attitudes in Berlin and London

So-called ‘soft’ policy instruments that respond to the psychological aspects of travel are regularly acknowledged as necessary complements to ‘hard’ infrastructure investments to effectively promote sustainable travel in cities. While studies investigating subjective orientations among travellers have proliferated, open questions remain including the role of recent technological advances, the expansion of alternative mobility services, locally specific mobility cultures and residential selection. This paper presents the methods, results and policy implications of a comparative study aiming to understand mobility attitudes and behaviours in the wider metropolitan regions of Berlin and London. We specifically considered information and communication technology (ICT), new types of mobility services such as car sharing, electric cars and residential preferences. In each region, we identified six comparable segments with distinct attitudinal profiles, socio-demographic properties and behavioural patterns. Geocoding of the home address of respondents further revealed varying contextual opportunities and constraints that are likely to influence travel attitudes. We find that there is significant potential for uptake of sustainable travel practices in both metropolitan regions, if policy interventions are designed and targeted in accordance with group-specific needs and preferences and respond to local conditions of mobility culture. We identify such interventions for each segment and region and conclude that comparative assessment of attitudinal, alongside geographical, characteristics of metropolitan travellers can provide better strategic input for realistic scenario-building and ex-ante assessment of sustainable transport policy.     

Modelling energy consumption of electric freight vehicles in urban pickup/delivery operations: analysis and estimation on a real-world dataset

Electric Freight Vehicles (EFVs) are a promising and increasingly popular alternative to conventional trucks in urban pickup/delivery operations. A key concerned research topic is to develop trip-based Tank-to-Wheel (TTW) analyses/models for EFVs energy consumption: notably, there are just a few studies in this area. Leveraging an earlier research on passenger electric vehicles, this paper aims at filling this gap by proposing a microscopic backward highly-resolved power-based EFVs energy consumption model (EFVs-ECM). The model is estimated and validated against real-world data, collected on a fleet of five EFVs in the city centre of Rome, for a total of 144 observed trips between subsequent pickup/delivery stops. Different model specifications are tested and contrasted, with promising results, in line with previous findings on electric passenger vehicles.     

An analysis of weekly out-of-home discretionary activity participation and time-use behavior

Activity-travel behavior research has hitherto focused on the modeling and understanding of daily time use and activity patterns and resulting travel demand. In this particular paper, an analysis and modeling of weekly activity-travel behavior is presented using a unique multi-week activity-travel behavior data set collected in and around Zurich, Switzerland. The paper focuses on six categories of discretionary activity participation to understand the determinants of, and the inter-personal and intra-personal variability in, weekly activity engagement at a detailed level. A panel version of the Mixed Multiple Discrete Continuous Extreme Value model (MMDCEV) that explicitly accounts for the panel (or repeated-observations) nature of the multi-week activity-travel behavior data set is developed and estimated on the data set. The model also controls for individual-level unobserved factors that lead to correlations in activity engagement preferences across different activity types. To our knowledge, this is the first formulation and application of a panel MMDCEV structure in the econometric literature. The analysis suggests the high prevalence of intra-personal variability in discretionary activity engagement over a multi-week period along with inter-personal variability that is typically considered in activity-travel modeling. In addition, the panel MMDCEV model helped identify the observed socio-economic factors and unobserved individual specific factors that contribute to variability in multi-week discretionary activity participation.

Modeling car-following behavior on urban expressways in Shanghai: A naturalistic driving study

Although car-following behavior is the core component of microscopic traffic simulation, intelligent transportation systems, and advanced driver assistance systems, the adequacy of the existing car-following models for Chinese drivers has not been investigated with real-world data yet. To address this gap, five representative car-following models were calibrated and evaluated for Shanghai drivers, using 2100 urban-expressway car-following periods extracted from the 161,055 km of driving data collected in the Shanghai Naturalistic Driving Study (SH-NDS). The models were calibrated for each of the 42 subject drivers, and their capabilities of predicting the drivers’ car-following behavior were evaluated.The results show that the intelligent driver model (IDM) has good transferability to model traffic situations not presented in calibration, and it performs best among the evaluated models. Compared to the Wiedemann 99 model used by VISSIM®, the IDM is easier to calibrate and demonstrates a better and more stable performance. These advantages justify its suitability for microscopic traffic simulation tools in Shanghai and likely in other regions of China. Additionally, considerable behavioral differences among different drivers were found, which demonstrates a need for archetypes of a variety of drivers to build a traffic mix in simulation. By comparing calibrated and observed values of the IDM parameters, this study found that (1) interpretable calibrated model parameters are linked with corresponding observable parameters in real world, but they are not necessarily numerically equivalent; and (2) parameters that can be measured in reality also need to be calibrated if better trajectory reproducing capability are to be achieved.     

Clean energy and transport pathways for islands: A stakeholder analysis using Q method

Introducing sustainable ways to use energy and transport resources is of paramount importance for creating pathways to more liveable futures. Islands not interconnected to the main grid offer, because of their typically small size, short point-to-point travel distances that suit better than most landscapes the range limitations of today’s electromobile eco-systems. This makes them a unique test-bed that may assist researchers, businesses and policy-makers in developing a better understanding of the diverse opportunities and challenges that come with supporting electric-drive vehicle (EV) infrastructure investments that actively prioritise renewable energy sources (RES). This paper reports the findings of a Q method study that looks into the attitudes of 44 key stakeholders that have a thorough theoretical and empirical knowledge of the existing power and mobility portfolios in such islandic landscapes. Our analysis identifies and presents three distinct groups of stakeholders with different priorities and visions: the ‘Tech Enthusiasts’, the ‘Transform Transport First Supporters’ and the ‘Fiscal Focus Executives’. All our respondents agree on the need for radically transforming the current transport-energy nexus offering. They identify the importance of integrated and clean solutions and recognise that support of pilot applications is more critical than research and development (R&D). They also expect technological breakthroughs to increase market maturities and reduce renewable energy production costs and feel that end-users are still hesitant to buy EVs and need incentives to do so.     

Immigration, residential location, car ownership, and commuting behavior: a multivariate latent class analysis from California

Using latent class cluster analysis, this paper investigates the spatial, social, demographic, and economic determinants of immigrants’ joint distribution among travel time, mode choice, and departure time for work using the 2000 Census long form data. Through a latent tree structure analysis, age, residential location, immigration stage, gender, personal income, and race are found to be the primary determinants in the workplace commute decision-making process. By defining several relatively homogeneous population segments, the likelihood of falling into each segment is found to differ across age groups and geography, with different indicators affecting each group differentially. This analysis complements past studies that used regression models to investigate socio-demographic indicators and their impact on travel behavior in two distinct ways: (a) analysis is done by considering travel time, mode choice, and departure time for work simultaneously, and (b) heterogeneity in behavior is accounted for using methods that identify different groups of behavior and then their determinants. Conclusively the method here is richer than many other methods used to study the ethnically diverse population of California and shows the addition of geographic location and latent segment identification to greatly improve our understanding of specific behaviors. It also provides evidence that immigrants are as diverse as the non-immigrant population and transportation policies need to be defined accordingly.